No audio problem with Tecra S1

Hello everyone, I have a Tecra S1 with Ms Windows Xp Pro and SoundMax Integrated Digital Audio, and my laptop has not been utting all sounds for two days.
What can I do to re-have my sound?

Hello

don't take this wrong, but first check the volume button.
Even the best sometimes forget.
Then check the devicemanager to see if device SoundMax is fine it.
Then check the mixer control panel to see that the output devices are not rejected or muted and important channels are not rejected or cut.

Hope this short helps you!

BR

Tom

Tags: Toshiba

Similar Questions

  • HP Envy 23 - K030: Audio problems with HP envy 23-K030 and Windows 8.1

    I read all the discussions on audio problems with the IDT High Definition Audio Driver and Windows 8.1
    I get audio on my speakers ONLY and not the headset.
    I uninstalled rebooted and reinstalled the correct driver by this web site of HP support for my machine.
    no luck - same behavior.

    The only thing that worked was the IDT driver installation and Windows device driver high definition.
    The headphone jack are properly behaved and everything is ok worked.  However, I lose the audio Panel BEATS and the functions of the Board of Directors of IDT.   (superior quality sound-even with the built-in speakers).

    An interesting thing I noticed, when the Microsoft driver is used (and work) on the control panel for this device, it presents "the left panel making" when the configuration screen for the 'speakers '.  for the official driver of IDT, it shows 4 outlets - none of them say "left sidebar", there's rear panel and a plug of façade.    On the old driver that didn't work, he showed "right pane" and there is no control on the right panel.

    I think the pilot is simply wrong of this material. The driver is to look 10/2013-it is as if it were updated for this model ALL in ONE - only when it comes to use the headphone jack.

    Is there a better driver (I can't "find one beyond 6.10.6486.0 or 6.10.6491 - both had the same problem.)

    I do not use my time to often-rarely-last helmet I used them they have worked. Now, they are not - a few automatic updates upset the balance of the force.

    Any help would be appreciated. IF not - it is a problem that a person should study.

    Also it is reproducible. I have install generic Microsoft driver-headphone jack works and the sound Jack not pregnant, I re - install IDT player - his fate only speakers and not jack.

    I thought about it.

    BIOS V 80.09 (on this wonderful site to Support HP) - does all the work

    V80.05 - did not work properly with this Version of Bios.

    Thank you HP very useful site if you take the time to browse through all the updates.

  • problems with tecra A2

    My tecra a2 crashes sometimes. The screen turns blue, and he said "beginning dump of physical memory. There is no consistency in what I do when this happens. The last time it was because I opened a pdf attachment, the time from before when I was using msn. Last time that the message was: problem caused by: ialmrnt5.
    All drivers are uppgraded.
    I also have some problems with the screen. Both when running on batteries and adapter. The screen seems to "blink" (black towers) for about a half second. This happens fairly regularly and independent of this program that I use.

    When I turn on the computer again everything seems to work normally, but it's really annoying.

    The computer was bought in August, and had this problem all along.

    I am grateful to all those who have comments or suggestions as to what is causing the problem.

    OK, that first of all, the problem occurred while you were playing a game, it is very likely related to your video card.

    Visit the Web site of the manufacturer for a driver update. If that doesn't help, check your RAM.

  • Power On problems with Tecra M11 - 10Z

    We have problems with our Tecras.
    When they are used in the field, the problem is the same on 75 machines and they cannot be turned on at all.

    It is sometimes useful to remove the battery, sometimes it it dosent and the laptop cannot turn on the next two days, and then it works well again until it does it again...

    How can it be, its starting to be a very big problem...

    We have tried to turn off the TPM and they perform the update to the newest bios, they are all running windows 7 pro 32-bit...

    I hope this is enough information because my English is not that great, and I hope that someone has solved this problem...

    Hello

    I noticed that the new BIOS has been released for the Tecra M11 series.
    Try to update the BIOS and check if it could enhance the functionality of s for laptop.

    Good luck

  • Audio problem with Skype on the helmet

    Hello. I have a sound problem with Skype on my helmet, when I talk to my friend I can hear him on my helmet, although the rest of the sound on my speakers. How change that so I could hear any sound on my headset?

    You can try this:

    http://community.Skype.com/T5/Windows-desktop-client/Skype-audio-splits-to-both-headphones-and-speak...

  • Audio problem with Windows 7

    Hello

    I have successfully upgraded from Vista to Windows 7 and I'm very happy with him... except. Audio glitches!
    With Vista, I have not had any audio problems but now with Windows 7 I. With the help of the dpc latency checker, I disabled all the drivers I could disable but no result.
    Can someone help me please?

    Hello

    What model of laptop do you have exactly?
    Have you installed Win7 its the most recent driver for your laptop model?

  • Audio problem with nitro v15

    Hi, I'm on this forum (AGAIN) because I have an annoying problem.
    Sometimes my sound card randomly stops working, I have a red x on the speaker symbol and an error sayng something like "no audio output device installed. Looks like it fixed itself aver a FULL stop, but when I have this problem the pc cannot yet completely shut, it crashes after shutdown with a black screen and the fans of coling at max speed, and I have to force by pressing the button.
    The last time that this happened, that I also had a bsd at the first boot sayng System Service Exception associated with rtkvhd64.sys.
    I
    already tried to restore, I removed and reinstalled all drivers, nothing works. Once o twice a day I loose that my sound card and I need to do a full restart closure of the pc in the brutal way.

    I'm starting to get tired of this pc, I already changed it TWICE for problems with the trackpad, I bought another in another store that has no problem with the touchpad, but now I have this problem which is even worse.

    Personally, weather or not, I have this problem will be solved, I will NEVER buy another acer pc. I'm running to / from the store with this thing for 3 weeks now, how can we Acer set up a portable 1200 euros in this way?

    http://community.Acer.com/T5/V-and-VN-series-laptops/VN7-592G-blue-screen-after-installed-Windows-10...

    In this section there are other people with the same problem (and a possible solution).
    I really hope this is the last time I have to lose a week to trubleshoot this laptop.

  • Audio problem with HP DV7 Notebook

    Hello:

    I have a laptop HP PC 4 year under Windows 7 Home Premium 4 GB of Ram, 64 bit OS.

    I'm not a technology person, so please bear with me...   I had a LOT of problems with programs like Word or Excel (and now also my IE) which gives me a message 'No response' and almost closed on several occasions.  I cleaned up completely my computer about three months ago in the restaurant of a set of restore disks which was prepared, when I bought the laptop, and Best Buy assured me that this would restore my computer as long as "new factory".  However, this condition lasted a few weeks.

    In any case: last week, I took the advice of a consultant Microsoft Community and cleaned my computer using Malwarebytes and then sought an updated on the site of HP driver and installed, and my computer behaves a little better, but I lost my audio cmpletely.  I tried to solve it, and the message says that my audio is "not connected"...

    Any suggestions?  Would be glad of some easy to follow advice.

    Thank you.

    Hello

    In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

    sfc/scannow                (Note that there is a space between sfc and /)

    Let the entire process, then the output type and press ENTER.

    Then, click on the Start Menu, click computer, left click Local disk C once to highlight, right-click on Local C drive and select Properties.  Click the Tools tab and then click on the button "check the drive for errors.  In the next window make sure that both boxes are checked, then click Start.  Right plan the audit on the next reboot of the system and then restart the laptop - this process may take several hours before the task in Windows.

    When this is finished and reloaded Windows, download the installer of IDT Audio on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50595.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

    Kind regards

    DP - K

  • NO sound when recording Audio - problems with Windows 7 Ultimate 64-bit

    I got in trouble for almost a year now with NO sound when recording Audio with Windows 7 Ultimate 64-bit. I just found this forum today. It's really weird how recording with windows and other sound recorder works perfectly since 1998 or so until the upgrade to win 7. Now every time I try to record it shows no found recording device or just fails to record any sound. As you'll see below I have activated What U Hear so I can use the system recording features sounds.

    I use the functions of audio recording and pdf reader because I'm legally blind. It is one of the few tools that I could use with ease on all my systems windows for many years.

    A similar question has started happening with nvidia graphics cards. AND... I was led to believe that it was a problem with Sony wanting more strong piracy measures built into windows. Am I correct to assume that this is what is happening with the sound also today or is there a solution to this frustrating problem?

    I run a dxdiag & posted that, according to me, you asked another user on the forum, the same or similar problem.

    Help solve this problem would be greatly appreciated as this has been a problem for quite a while now.

    ------------------
    Information System
    ------------------
    Time of this report: 07 25, 2012, 19:06:02
    Computer name: RAIDER
    Operating system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503) - 2030
    Language: English (regional setting: English)
    Manufacturer: Gigabyte Technology Co., Ltd..
    System model: P67A-UD3-B3
    BIOS: Award BIOS v6.00PG Modular
    Processor: Intel Core i5 - 2500K CPU @ 3.30 GHz (4 CPUs), ~3.6GHz
    Memory: RAM 8192MB
    Available OS memory: 8176MB RAM
    Page file: 2861MB used, 13487 MB of available space
    Windows Dir: C:\Windows
    DirectX version: DirectX 11
    DX setup parameters: not found
    DPI setting: Using System DPI
    System DPI setting: 96 DPI (100%)
    DWM DPI Scaling: disabled
    DxDiag Version: 6.01.7601.17514 64 bit Unicode

    ------------
    DxDiag Notes
    ------------
    Display 1 tab: No problems found.
    Sound tab 1: No problems found.
    2 Audio tab: No problems found.
    Input tab: no problems found.

    -------------
    Sound Devices
    -------------
    Description: SPDIF Out (Sound Blaster X - Fi Surround 5.1 Pro)
    Default audio playback: Yes
    Default voice playback: no
    Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
    Manufacturer ID: 65535
    Product ID: 65535
    Type: WDM
    Driver name: ksaud.sys
    Driver version: 6.00.0001.0460 (English)
    Driver attributes: Final retail
    WHQL Logo would be: n/a
    Date and size: 2010-07-30 11:35:08, 1588608 bytes
    Other files:
    Driver provider: Creative Technology Ltd.
    HW Accel level: basic
    Cap flags: 0x0
    Min/Max sample rate: 0, 0
    Static/Strm HW Mix beef: 0, 0
    Static/Strm HW 3D steers: 0, 0
    HW memory: 0
    Management of the voice: No.
    Listen/Src/EAX (TM) 2.0: No, no
    Listen/Src/I3DL2 (TM): No, no
    Sensaura (TM) ZoomFX (tm): No.

    Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
    Default audio playback: No.
    Default voice playback: Yes
    Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
    Manufacturer ID: 65535
    Product ID: 65535
    Type: WDM
    Driver name: ksaud.sys
    Driver version: 6.00.0001.0460 (English)
    Driver attributes: Final retail
    WHQL Logo would be: n/a
    Date and size: 2010-07-30 11:35:08, 1588608 bytes
    Other files:
    Driver provider: Creative Technology Ltd.
    HW Accel level: basic
    Cap flags: 0x0
    Min/Max sample rate: 0, 0
    Static/Strm HW Mix beef: 0, 0
    Static/Strm HW 3D steers: 0, 0
    HW memory: 0
    Management of the voice: No.
    Listen/Src/EAX (TM) 2.0: No, no
    Listen/Src/I3DL2 (TM): No, no
    Sensaura (TM) ZoomFX (tm): No.

    ---------------------
    Sound Capture devices
    ---------------------
    Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
    Capture audio by default: Yes
    Default voice Capture: No.
    Driver name: ksaud.sys
    Driver version: 6.00.0001.0460 (English)
    Driver attributes: Final retail
    Date and size: 2010-07-30 11:35:08, 1588608 bytes
    Cap flags: 0x0
    Format flags: 0x0

    Description: Microphone (Webcam Pro 9000)
    Capture audio by default: No.
    Default voice Capture: No.
    Driver name: USBAUDIO.sys
    Driver version: 6.01.7601.17514 (English)
    Driver attributes: Final retail
    Date and size: 2010-11-21 13:23:47, 109696 bytes
    Cap flags: 0x0
    Format flags: 0x0

    Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)
    Capture audio by default: No.
    Default voice Capture: Yes
    Driver name: ksaud.sys
    Driver version: 6.00.0001.0460 (English)
    Driver attributes: Final retail
    Date and size: 2010-07-30 11:35:08, 1588608 bytes
    Cap flags: 0x0
    Format flags: 0x0

    Hello

    In Services, verify that the Windows Audio service is running and set to automatic.

    a. Click Start and type Services and press ENTER.

    (b) ensure that these services are defined accordingly.

    c. right-click the service, and then click Properties.

    According to the DXDiag, there is no default sound capture selected.

    Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
    Default audio playback: No.
    Default voice playback: Yes

    Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
    Capture audio by default: Yes
    Default voice Capture: No.

    Description: Microphone (Webcam Pro 9000)
    Capture audio by default: No.
    Default voice Capture: No.

    Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)

    Capture audio by default: No.

    Default voice Capture: Yes

  • Audio problems with Toshiba laptop

    So I have a Toshiba laptop with Windows 8, and the noise on this subject with headphones is way way too low, that he was stronger on my old laptop, the speaker volume is strong so I don't understand why headphones are so quiet that I uninstalled the drivers that came with him and got the generic Microsoft High Definition Audio ones , but that did not help either, I made sure all sound bars are completely upward in the settings of the headset and I ensured that no effects were on and that the quality was 24 - bit, it of just the laptop or is there a problem with the driver? is it possible to simply drive the sound from the speakers in the headphone, or is it necessary that when I plug in my headphones must change the one that says earphones. Help? Basically, it seems that the midrange and treble are too low, while the bass is stronger, it sucks.

    Hi Pawel,

    Sorry for the late reply.

    1. Press Windows + X key.
    2. Select Control Panel and then Sound.
    3. Right-click on "helmet", and then select Properties.
    4. Go to the tab improvements .
    5. Ensure that "disable all enhancements" is selected.
    6. Save your changes.
    7. Restart the computer

    Let us know if you are facing a similar question after the computer is restarted.

    Get back to us with the the model number of the laptop, you face problems with so that we can help you.

  • Audio problem with Hp envy tochsmart

    Hello this is krishna.

    I am facing sound problem with laptop Hp envy touchsmart. When I play something indicating an error. then follow by restarting the computer laptop im getting sound properly. im not what problem.please help

    Hello

    Try the following.

    Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

    Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

    After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

    Recovery Manager - Windows 8.

    Recovery Manager - Windows 7

    Kind regards

    DP - K

  • Problem with Tecra M1.

    I have a Tecra M1. I get a blue screen when I try to run a .mpg file in Windows. Takes place the following message:

    STOP: 0X0000008E (0XC0000005, 0XBF9CA867, 0XB032AC50, 0X00000000)

    tridxp4.dll - address BF9CA867 Base at BF9C3000, DateStamp 3fbd47b6

    Dump of physical memory... early etc.

    I have tried to find any solution to http://technet.microsoft.com but came up with nothing. I also had a "search in google session", but nothing came. I've also been on the phone with the Toshiba Norway and they told me that I can download the Checkutility. I did, but nothing came.
    Can someone help me with this problem?

    Thank you.

    David Paulsen

    Hey,.

    Operating system you have on the laptop is the original or have you installed another?

    The "tridxp4.dll" file is in relation to the display driver so that you can download and install the latest driver from

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

    See you soon

    P.S. If you have installed the operating system from an original cd, you will need to follow the order of installation (for all OS) link below

    ECRA http://UK.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=158&service=UK&from=faq_selection&CFID=T + M + series & FID = TIU0000002b85

    See you soon
    Once more :)

  • Sound problem with Tecra 9000 on Win XP SP2

    Hello!

    First! Excuse me for my English!

    I am trying to install a Tecra 9000 with Windows XP SP2. The problem is the noise. My XP does not recognize the sound card, I am trying to install the drivers, but the system answer me 'the driver was not installed' and I don't know how can do to his works.

    I read a few post on the forum, but I can't solve this problem.

    Could someone help me.
    Thank you!

    I think this doc Toshiba should help you:

    [Windows XP Service Pack 1 and 2 incompatible with existing Yamaha driver sound | http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=2772 91xml & sliceId = & dialogid = 54976777 & stateId = 0 0 52121258]

    There is a link to a driver that should help to address this problem.

  • Satellite M100: TV card realtek HD audio problem with Ulead DVD movie factory

    Hello!

    I just bought a new TV tuner card. All works find on my other computer laptop xp (not toshiba) for my toshiba m100, all are ok except for the audio.

    I used a lot of tv as honestech TVR 2.0, Intervideo windvr software 3, HT TV Plus gold but none can deliever the sound.

    Then I stumbled on Ulead DVD movie factory software that is packaged with my Vista Home Basic when I bought my laptop.

    I looked at the advanced video capture option, but there is no audio input source. It makes me wonder, if the supplied software, given my toshiba itself cannot solve this problem, it is must be something wrong here. Page here [http://img132.imageshack.us/img132/9449/tvge3.jpg | http://img132.imageshack.us/img132/9449/tvge3.jpg]

    My toshiba m100 uses realtek high definition audio.

    How anyone has here the idea out audio?

    Sorry, but I don t understand what you want to do.
    If you want to capture the sound, you will need to connect the audio device to the audio line in port. BUT the laptop does not support such port!

    I presume that you have plugged into the external TV tuner card. Well, in this case, you should check the properties of the TV tuner!

    By the way; the laptop supports the sound chip of the HD Audio Realtek ALC 861.
    Visit the Realtek site and download and install the latest driver from the page!

  • Audio problems with Satellite P200-1BA

    ... Hi, first, my English is bad... :D

    I have a problem - I bought the Toshiba Satellite P200-1BA
    After I bought the laptop, I reinstalled the operating system (recovery DVD 1 time)-j' have audio, but I m missing the settings for the subwoofer + virtual surround sound + equalizer! ...
    Now I m help legal windows Vista Ultimate Edition, installed all the drivers + utility for my laptop, the Toshiba site, but I can't yet find the settings...

    Do I need an additional program for the improvement of the sound, or I need only the audio driver?
    Once more, I can't speak English, but I hope, someone of you can understand me and can help me - thanks in advance!... ;-)

    Do I have to use my subwoofer bass, virtual sound + Equalizer again?

    As far as I know Toshiba doesn't offer a special software for that. All available parameters, you can find in the Realtek HD Audio Manager in the control panel.
    Each player has own EQ options and when you listen to music with a few players check this option in the drive itself.

    That's all.

Maybe you are looking for

  • Satellite A300: cannot start: blocked by Phoenix TrustedCore Setup Utility

    {SUMMARY: "Phoenix TrustedCore Setup Utility" appears every time you start, requesting a non-existent password.} How to get rid of this request? } This one is a little weird. We have a Tosh Satellite A300-193 mobile (Code manufacturer: PSAJ1E-01000XE

  • WLC controller anchor Cisco HA

    Team - we're going for a refresh of the WLC anchor. Current is 4402 which is used only for the guest user connections, there is no recorded on this AP. We would replace it with 5508 but this time in HA. Q. you really go for AIR-CT5508-HA-K9.  Cant we

  • Upgrade from Exchange 2000 to 2003

    Hi, can someone tell me if I need to perform an update of more Windows AD Schema on the Windows domain if offbox Exchange Server is upgraded to Exchange 2000 to Exchange 2003? Why I asked because in the AD schema update program, we just need to choos

  • GANYMEDE and WCS

    I'm looking for documents for the configuration of controllers of WCS to use authentication GANYMEDE +.  The current controllers use authentication GANYMEDE + but we have two new controllers that we want to install use GANYMEDE +.  Tried to add the G

  • Dynamic selection tabular list

    Hello, I am new to the PL/SQL and APEX.I want to create the dynamic selection list in a table based on another column in the same tabular form. But lack me of expression stop.Can someone tell me whats wrong with my code?Behold, my codeSELECT ID, NILA