No audio signal output windows 7 SR1629uk

Similar Questions

• No audio signal outputs H264 mpeg-based original

  Hello

  This has happened twice now, and I'm not sure this that cleared before

  I created a video using 'The match sequence settings' and created an mpeg file that has audio.  If I automatically (using the my watchfolder option) or manually, by dragging in the SOUL create a wmv or H264 version, they have no sound!

  Any ideas?

  I use CC on a PC windows with a card NVidea FX3800.  CUDA as renderer

  I think that if I export stright to H264 for the Organization, which works very well

  Thanks in advance

  I can confirm this as well, more the workaround solution that moves the MPEG file allows the audio to be recognized.  I think that the cause is a XMP metadata file that is created in the same directory.  If you delete the XMP file before adding the MPEG file in the queue of the SOUL, it also fixes the audio.

  Good find!

• HDMI - no audio output, windows 8

  Hello

  I have a laptop HP 2000 with Windows 8.1. At some point, the hdmi output to monitor stopped to send an audio signal. The video signal is very good.

  It is marked in the Device Manager: 1 - STD HDMI TV (AMD High Definition Audio)

  The monitor and hdmi cable work well with other computers.

  I have disabled/enabled the HDMI device and also updated drivers (Windows says that my drivers are up to date).

  Any help appreciated. Thank you.

  Scott

  Hi, Scott:

  See to install the latest audio driver for AMD HDMI works for you...

  Accept the agreement.  Download and install the ATI HDMI Audio Device driver.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• I use Windows Movie Maker on Windows 8 computer and when I put in a video and you try to look at it, it appears black with no audio signal. How can I fix it?

  I use Windows Movie Maker on Windows 8 computer and when I put in a video and you try to look at it, it appears black with no audio signal. How can I fix it?

  Hi Michael,

  Thanks for posting your query on the Microsoft Community.

  Because the problem is specific to a particular video file or all the files?

   

  Follow the methods and check them off below if it helps:

  Method 1: Reset the Windows movie maker for default settings and check.
  To restore the default settings

  1. click on Toolsand then click Options.
  2. click on the tab that you want to reset the settings and then click on the default settings.

  Method 2: I suggest you run the audio Troubleshooter and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab3&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 3: repair of Director and check

  Follow the link as reference below:

  https://support.Microsoft.com/en-us/mats/video_freezes_or_crashes

  Hope this information is useful.

  Thank you.

• No audio signal through HDMI (dv9700t CTO)

  HP Pavilion dv9700t CTO Entertainment Notebook PC / Windows Vista 64-bit

  I put the audio device by default for the device "Realtek Digital Output. I have no sound.

  I've updated the audio drivers on the HP support site. Still no sound via HDMI. (the microphone quality was reduced at the point of being worthless)

  I have updated the drivers with drivers from the site Web of Realtek. Still no sound via HDMI. (I found micro feature)

  The box of bolt that I'm trying to connect to indicates that there is no audio signal passed him from this source (my laptop). I even tried to connect directly to the tv. Which doesn't work anymore.

  Its almost as if there was no link between the audio and HDMI port.

  

  Message edited by Slybo on 12/23/2008 06:22
  Message edited by Slybo on 12/23/2008 06:24

  I have dv9758ca and I have the same problem. No sound with the yamaha receiver. I sound with my LG TV and I tried with an Onkiyo recevier and it worked.

  Once I had the sound on the yamaha (was a flook). the image was running on the TV and the screen of the computer (which is not normal) at the same time. then I concluded that the problem is the HDCP protection. the yamaha recevier is HDCP.

  I've still did not know what the solution is, I just wanted to share my experience

• I want to stop Dell Dock d3100 Audio HDMI output.

  I recently bought a d3100 dock and I use it to connect my Inspiron 13z with Windows 8.1 to multiple devices, including an HDMI monitor and stereo speakers.  It turns out that my monitor has built-in speakers and does not allow them to be disabled or cut.  They sound terrible, so I'd like to stop to send the audio signal to them.  Unfortunately, windows detects the Dell dock as a single USB audio device and I don't have the ability to send audio to the stereo output 3.5 mm without sending it also both HDMI outputs.

  If anyone has a suggestion on how to use the HDMI output for video without sending audio to the speakers on my monitor, please let me know.  There are HDMI cables that have an audio connection?

  Thank you, Chris.  It is not a Dell monitor that I'm connected, I use an Acer B273h.  I tried to watch the sounds-> playback settings in Windows.  The problem there is that the d3100 Dell presents itself as a single USB audio device.  There is no distinction between the 3.5 mm stereo output and HDMI audio output.

  However, I found a solution.  I remembered that HDMI and DVI have the same video encoding, and also, my monitor has a DVI input.  So, I picked up an HDMI cable to DVI, which now sends only video to my monitor.

  Problem solved!

• Toshiba 32TL933G: No Audio signal in PC mode

  Hello

  I connected my laptop VGA to entry-level PC TV and the Audio output of the laptop to TV Audio IN.
  No Audio in PC-Modus!

  Is it possible to go from Audio IN to the PC Input?
  Now I have a video in PC * GOLD * Sound in EXT2, not together.
  IF not, I will return it

  Nevertheless a beautiful Asian.
  Rudolf

  The fact is that VGA port does not provide the audio but video signal only.
  So if you a TV connected to the computer laptop s port VGA, audio signal would not be provided.
  You need connect the TV with an extra audio cable in order to get the sound.

  The laptop must be connected to the TV s L R taken audio using an audio cable additional of Y. So that you can connect to s portable headphone plug to two L R audio ports that are available on the back of TV s

• 6733 continuous signal output generation.

  Hello

  I want to use an NI PCI-6733 map for generation of continuous signal output.

  I downloaded the modules OR measure small DDK OR 671 x & 673 x examples (PCI & PXI) and run the samples.

  Our goal is to put a few samples in the FIFO buffer and use the external update (on PFI5) to send the samples to the exit.

  Essentially a combination of AOEX4.cpp and AOEX6.cpp example should work.

  However, example 6 uses board-> DACDirectData0.writeRegister (.) to set an output value.

  To update the output, I use the following code to generate a wave of block.

  Sub
  NIPCI6733Card:nPoll_Test_T6() / / function called at 5 kHz
  {
  t67xx * Council const = & GetNI();
  Support * const theSTC = & GetSTC();

  ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
  theSTC-> Joint_Reset.writeAO_Configuration_Start (1);
  theSTC-> Joint_Reset.setAO_Configuration_Start (0);
  theSTC-> Joint_Reset.setAO_Configuration_End (1);
  theSTC-> Joint_Reset.flush ();
  ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

  Board-> DACDirectData0.writeRegister ((OutputHigh). 0400:0 x 0 x 0);
  Board-> DACDirectData1.writeRegister ((OutputHigh). 0400:0 x 0 x 0);
  Board-> DACDirectData3.writeRegister ((OutputHigh)? 0100:0 x 0 x 0);

  OutputHigh =! OutputHigh;

  }

  My frequency of update of application (the election) is 5 kHz. The output should run on 15, which means that each update I need to resolve before the 3 samples. I want to use FiFo for this.

  (Note: the output is triggered by PFI5 at 15 kHz)

  My idea is to 3 samples in the FiFo buffer each update of the application and leave the external trigger update of the output.

  Example 4 uses the FiFo. However, this example stops after 5 running running the same fifo data.

  How can I set up FiFo continuous data?

  370735e.PDF manual describes the following:

  With non-regeneration, old data will not be repeated. New data should be
  continuously written to the buffer. If the program don't write new data to
  the buffer at a speed fast enough to deal with the generation, the buffer
  will be negative and cause an error.

  This is what I want. Is there an example?

  Kind regards

  Peter

  Dennis,

  Thanks for your reply.

  I have whil post-its on the correct Board.

  I implement for IN-Time. It is a time real OS for Windows.

  Kind regards

  Peter

• NOR-USB 9229: How audio signal acquisition?

  Hello

  It's one of those stupid beginner questions I use a module OR 9229 USB to capture the audio output of my computer line as follows:

  -left line-out goes to AI0 +.

  -right line output goes to AI1 +.

  -land line out of is divided into two and goes to AI0 - and AI1 -.

  What is the correct way of wiring?

  In case it is, I have (I think) have problems audio signal acquisition. In the Measurement & Automation Explore, I creates a task for the acquisition of voltage AI0 (44100 Hz, etc.) -nothing is displayed on the graph when I run the task! (I have music running on the computer during the measurement) Otherwise, the 9229 flashes green, seems to be ok, auto test work, etc..

  Someone has an idea what I am doing wrong?

  Thank you!

  Hi acgrama,

  That sounds like it should give you a signal any (not an empty graph or a flat line at 0 V), but the USB-9229 is not very suitable for audio:

  • The USB-9229 to entry level is of +/-60 V. A line level audio signal will use a small fraction of that. Of the USB-9229 precision and plug noise are adequate for your application?
  • The USB-9229 can't acquire them exactly 44.1 kech. / s. It supports some 50 kech sampling frequencies. / s divided by a number between 1 and 31, as 50 kech. / s, 25 kech. / s, 16.7 kech. / s and so on. When you specify a sampling clock DAQmx not taking in charge, he is forced to the top supported next, which in this case is 50 kech. / s. (you can read back the SampClk.Rate property to see what DAQmx forced the rate to.) For 44.1 kHz audio to USB-9229, you will need to re - sample the acquired data (which are specific to the programming environment).

  Assuming that you're just trying to do it for learning or experimentation, here are a few ideas:

  • Is the line connector configured as an output line? Many mothers today have reassignables audio connectors.
  • The volume of the source (wave, CD, whatever) high enough?
  • On the graph, is scaling auto turned on? If you display data in a table instead, are the numbers exactly 0 or any close?
  • The output of the line works if you are connecting to another device that is designed to handle signals to line level?
  • If you connect a battery (AA, 9V, whatever) for the USB-9229 instead, read the Max supply voltage?

  Brad

• similarity of 2 audio signals

  Hello!

  I m trying to figure out how to get the similarity of the two audio signals in LabVIEW.

  I read the original signal of WAV file and do some operations with it (filtering etc.). After that, I want to know similarity of the signal (spectrogram) original and filtered.

  I don't know about two things: distance correlation and cepstrum (Don t know how to implement).

  I tried the file CrossCorrelation.vi of LabVIEW to compare my spectrograms of two signals, but I m do not know how to evaluate the result (check photo).

  I get some sort of graphic information, but how can I assess it statistically? For example: output is similar to the entrance of 80%...

  Can you show me any direction or advice?

  I have LabVIEW 2013

  I have also attached my VI + WAV signal source.

  

  Commenting on the spectrograms is probably a good start.

  If you are able to define the characteristics that are important, later, then go back and try to implement those measures.

  I think that the Hilbert transform can be used to get an envelope. I did not and am unsure of the theory, but some research can give you some ideas.

  Lynn

• Several digital audio HDMI output inputs TV

  With several HDMI on KDL37XBR6 inputs and using the output to an input of digital audio receiver, how does TV know what audio signal to send to the amplifier?

  Hello

  Welcome to the community of Sony!

  The TV will be the audio signal to the input device selected in the receiver.

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• problem audio import in windows moviemaker

  I am trying to import MP3 audio files to Windows movie maker. Sometimes they work, sometimes I get an error message.  It just says: could not import the files, but no reason is given.  I downloaded files on Amazon and Rhapsody.  I get the same message anywhere, I buy the files.  Help!

  MP3 files can cause compatibility problems. Best
  bet would be to convert them to the. WMA format
  before you import into Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your MP3 clips on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Has no Audio after than Windows 10 Upgrade on the venue Pro 8

  I upgraded my windows Pro 8.1 for Windows 10 8 coming.  After upgrading my audio system failed.  There is no speaker output.  I can't say for sure, but I guess that the microphone input has also failed.  I tried to address in trying to update the audio drivers, but Windows tells that the installed drivers are up-to-date.  In Device Manager there are two devices reported as follows
  (1) Intel ESS Audio Device (WDM): 604.10135.1010.531 driver Version, dated 25/05/2015.  and (2) codec Realtek Audio I2S: 604.10135.1010.531 driver Version, dated 25/05/2015.  is it okay to have 2 devices like this for audio?   I don't know how to check what audio system is actually present in the material for this tablet.  I'm a little nervous on the uninstallation of one or more of the devices in Device Manager without knowing what device is supposed to be there and where to find the correct driver.   Could someone point me to the correct process to diagnose and fix this?

  FIXED!

  I solved the audio problem rolling back the drivers.   I followed the inst to the 3rd point of windows.microsoft.com/.../fix-sound-problems

  Before doing so, I used the audio Panel to try to diagnose.  When I tried to use "set up" for reading and test selected, I got an error that the system couldn't procduce the sound to send to the President.

  To make the repair, I selected these drivers that were somehow still available on my system.  For Intel ESS, I chose 603.9600.1948.30594 dated 22/11/2013.  This alone has not resolved the problem, because I then changed the driver for the I2S for: Realtek #6.2.9400.4028 dated 30/08/13.  After the system restarts, I returned the audio Panel to test.  SURPRISINGLY, I heard the test sound.

• There is no audio signal of chronology in PREL12 the .m2ts files

  Windows 7-64, first 12 items (64 and 32 - the same result)

  Panasonic SC - 920 X camcorder, recoding format 1920x50p + DD5.1

  1. If I just copy the files .mts from an SD card into the PC and import it into PREL then there no problem with audio. It is to play the preview and timeline window.

  But in this case, I have a problem with the long record - camcorder breaks large files.

  So I use the SD instead of the simple copy import.

  2. the import of the SD using PREL12 (Get media of-> cameras Flip, AVCHD,...). In this case I get at disk .mts files and no audio timeline with these files. But in all other programs, these files are played with audio.

  3. import the SD using Panasonic HDWriter program. In this case, I get .m2ts files (and some metadata files.). These files read normally (with audio) in any player and the program I have (WMP, MPC, Corel Video Studio Pro X 6 etc.). Except the chronology of the PREL12.

  There is no audio signal of PREL timeline. And at the same time there is audio of the preview in the same PREL window (after double clicking on the item in the active project)!

  There is no yellow bar above these clips. Project settings - 1980x50p PAL AVCHD

  How to get audio of time?

  dik07

  Something for you to try.

  The quick and very rough to solve this way...

  Expert workspace...

  Before you import your media into the project, set the predefined project manually to

  PAL

  AVCHD

  Full HD 1080i25 5.1 channels

  To manually set the project preset

  • Open the project in the workspace Expert and go to file menu/new project and change the settings.
  • In the settings, set the project preset to match the properties of the source media. OK to get out of there.
  • In the dialog box new project opens, rename the project and make sure you have a checkmark next to the "Force selected setting on this project." OK to get out of there.

  And then import your source files in the project by the different ways you have tried and found not to work for your application.

  If it works, then the real solution...

  Premiere Elements does not come with a preset project to PAL AVCHD AVCHD 1080 p 50 5.1 channels.

  But, you can create one for use if gross suggests you need a project that is pre-configured with 5.1 channels included in its description. Please see details

  RTA Premiere Elements troubleshooting: PE11: export a file 1080 p 50 or 1080 p 60 with Audio to 5.1 channels

  Let know us the results and then we can decide what then.

  Thank you.

  RTA

• Output window of Notepad

  Notepad will be an output window in the future, rather than add the output as comments to the script?

  I'm not sure of the use and development of scrathchpad

  You're probably better off asking on the development of a

  • http://www.Mozilla.org/about/forums/#general-development