No backlight on Resume from sleep mode - toggle and backlight power lights. dv6t laptop, Windows 7

Similar Questions

• Pavilion g6-1d21dx: long time driver or BIOS on Pavilion g6-1d21dx number may not resume from sleep mode or Hibernate mode

  When my g6-1d21dx Pavilion was still fairly new, Windows 7 has started to hang whenever I tried to resume from standby or hibernation, and I couldn't get back to work until I held the power button down to force the computer to restart.

  Now, I did a clean install of Windows 32-bit 10, and everything works fine, except for - big surprise - repeated from the previous day and hibernation. Windows 10 adds quick start to the mixture, which also does not work properly, probably because it's a similar feature.

  HP already explained the cause of this problem, or provided a fix? The BIOS I have is F.49, but the projection of BIOS newer on the product page is a F.48. Maybe I need to reduce my BIOS? I saw a post where someone has talked to return to F.46 to fix very similar if not same problem on another model of Pavilion g6. In any case, anyone who is familiar with this issue?

  More details:

  If the quick start is activated, whenever I put him computer have a BSOD and reboot. Usually, the error is unexpected_store_exception but I also had kernel_data_inpage_error a couple of times. The computer appears in the standby mode and Hibernate successfully, but when I try to resume it turns his wheels for a little while and then just restarts, usually without error message. For the moment, I have quick start disabled and sleep and Hibernate in my power options.

  Thanks for any relevant information.

  The solution for me was to install F.46 revision of the BIOS. I got F.49, and the latest version available on the support site is a F.48. I don't know if there is a downside to this...

• S5000-204 W/WinXPPro is not resumed from sleep mode

  I have a problem with the recovery of the standby mode:
  After installation of raw WinXPPro SP2 to the system was ok and also the process to sleep / recovery.

  Then I installed Toshiba and controls of Toshiba common modules and now when the system goes to sleep I can't resume: if I push the power on button, the system starts up but black screen... and I have to stop and restart.

  Can someone help me?

  I have tried to remove the drivers toshiba and tools, re - apply sp2, reinstall the toshiba tools and so on with without success.

  Thanks in advance

  Hi matteor,

  I have my opinion, it would be you helps to uninstall all drivers and tools and reinstall them in the right order.
  On your Toshiba Tools CD is a file html with the order of installation. To use SP2 it would also be useful to download the drivers available from http://eu.computers.toshiba-europe.com

  There is also a PDF of drivers by using SP2 update

  Theo Bye

• x 220 does not resume from sleep mode

  A few questions posted here look identical, but I did find something similar.

  About 10% of the time, the machine does not sleep.  When you open the cover, the power led Nightlight INDIGLO®, caps lock light, LED, mic mute light and light through a Flash every seven seconds or more.  No messages appear on the screen.  By pressing the power button does nothing.  After a forced shutdown (power longpress button), and then pressing the power button a times, I gives me the message on windows does not shut down properly with the choice to start in safe mode.

  I'm not sure of the cause... I've updated everything that I can think of, but the problem persists (on an irregular basis).  The battery is too loose in the slot?  A jiggling of the batterery during sleep will cause an abnormal termination?

  Name of the operating system Microsoft Windows 7 Professional
  Version 6.1.7601 Service Pack 1 Build 7601
  INTEL CORE I5 - 2520M PROC SBB
  System model 4286CTO
  System Type x 64-based PC
  Processor Intel (r) Core i5 - 2520M 2.50 GHz, 2501 MHz, 2 Lossnay, 4 logical processors
  Version of the BIOS/Date LENOVO 8DET54WW (1.24), 18/10/2011
  SMBIOS Version 2.6

  This issue is NOT resolved.  I'll update the changes in the comments below.

  If there is a green box below this post that says 'resolved', please ignore.

  
  

• Unable to resume the computer from sleep mode

  Original title: monitor going to sleep then will not return without tapping computer power button. used to click just a key

  This monitor goes to sleep. have a very hard time to bring. used for any key just click and the monitor lit up back. I must now press the power button to turn on. This may turn off the computer.

  Hi Larry Lane,.

  ·         What version of the operating system is installed on the computer?

  ·         Have you made changes on the computer before this problem?

  Follow the steps in the article.

  The problems of wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  For reference:

  Sleep and extended: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

• I have a pavilion with Vista m9457c. Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.

  I have a pavilion with Vista m9457c.  Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.  I knew that the fan on the video card was bad, so I replaced the video card.  This does not solve the problem.  I did so that the keyboard and mouse could get the computer from sleep mode, but it is still not correct the problem.  If I let the computer to sleep, nothing happens when I move the mouse or press the Crescent Moon on the keyboard.  The screen remains dark.  Then I have to physically press the power button / stop and return to restart the computer. Help me, Obi - wan!

  Hello

  You can read the folloaing articles and see if it helps.

  The problems of wake the computer from sleep mode

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

  Hope this information is useful.

• Computer is slow after waking from sleep mode

  Original title: my computer is very slow to wake up from sleep mode, especially in the morning, how can I solve this problem?

  Every morning, I'm not able to open any program. If I click too, it freezes andgets cloudy. I know that this is not a virus, because I used my Norton Power eraser and it found no threat.

  Hi OtiliaRodriguez,

  -Did you of recent changes made to your computer before this problem?

  Look in the event viewer to see the error message or error code originally this problem.

  The event viewer is an advanced tool that displays detailed information about important events on your computer. It can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  Open event viewer

  What are the information in event logs? (Event Viewer)

  In the meantime, try the steps listed in this article:

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

• Need to reset the NIC wireless through troubleshooting whenever I brought back from sleep mode or Hibernate mode?

  My system information:
  -Microsoft Windows 7 Home Premium Version 6.1.7600 Build 7600
  -Toshiba Satellite A505
  -PC x 64
  -Intel Core 2 Duo T6600 @ 2.20 GHz 2200 Mhz 2 carrots 2 logical processors
  -Version/date bios: Insyde 1.70, 15/09/2009
  -smbios version 2.4

  The adapter information:
  Connection to the local network - Realtek PCIe FE Family Controller, updated all drivers, since I'm connected wireless but I guess it says "network cable is unplugged" is normal.

  Wireless network - Realtek RTL8191SE Wireless Lan 802.11n PCI-E NIC, put to update the drivers. It is disconnected, but disabled right out of the standby mode.

  Wireless network connection 2 - Microsoft Virtual Wifi Miniport Adapter, drivers updated. I've never installed it... or something... so I don't know why it's here, or what he does. This disappears when I put in sleep or Hibernate mode and then resume, but reappears after a repair. No matter what he always seems to say no 'connected '.

  Problem:
  Whenever I brought back from sleep mode or Hibernate mode, my internet connection is cut off. Trying to connect to my router, I have an error message and invites me to troubleshoot. I allow the computer to troubleshoot and it resets my wireless adapter, which allows everything to work once more. I ran an ipconfig/all using a Hibernate once and it seems that everything is disabled just before I run troubleshooting... "media disconnected". It is not a huge problem of having to run whenever I resume a session, but it's a boring troubleshooting.

  Failure of solutions:
  Updated all the drivers, when all drivers are always updated
  Disable "Allow the computer turn off the device" tab of power for all 3 cards, at the moment it is always disabled
  Disable ipv6 on all cards, at this time, it is always disabled.

  Interesting facts:
  "Microsoft virtual wifi miniport card knows driver or hardware related problems.
  This came after one of the sessions of troubleshooting... What is the microsoft virtual wifi miniport...?

  Sorry if I did not provide the correct information to help solve my problem... just tell my something else I should add :)

  I had the same problem on my laptop computer l500 do not know why it does this, but it was the case I have reactivated "Allow the computer turn off the device" tab power supply for my wireless adapter and it seems to work again.

  I think it worked because he wasn't let go out properly when I slept I hope laptop that yours is just as easy to fix

• TrackPoint and Touchpad stops working after recovery from sleep mode

  Every now and then when my thinkpad edge 11 out of the previous day. The pointer doesn't move. It makes no difference if I use the trackpoint or touchpad. In this case I have to restart the computer using the keyboard and then pointing devices up and running again. No one knows how to fix this? The problem does not occur every time during the recovery from sleep mode, but sometimes it does.

  Hey won1,.

  uninstall the current driver for touchpad/trackpoint for your device.

  Windows should then install its own generic drivers. now with generic drivers install, place your unit in standby mode and then resume.

  see if the same error occurs. in the meantime, go to > http://support.lenovo.com and update your drivers in the bios unit.

• All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  Tell us what event preceded "all of a sudden" - something to do with the software or hardware environment

• May not wake my Equium P300 from sleep mode

  My * Equium P300-16 t * not waking up from sleep mode.

  If I use Fn F3 I get the message enter sleep and from what I read by pressing the power button wake the machine upwards, but not in my case.

  I also tried the Power Options to automatically mode after a specific period, but once again I can't wake the machine and do a hard reboot.

  My OS is Vista Home Basic.

  Anyone offers advice on how to fix this please?

  Thank you

  > but again I can't wake the machine and do a hard reboot.

  Your BIOS is up to date?
  Otherwise, update the BIOS

  Also in my experience sleep mode issues could be caused by corrupted system, so new facility could help solve this problem too.

• Tecra M5 does not return from sleep mode

  Sometimes my Tecra M5 won't wake up from sleep mode.
  The LCD does not turn, and hard drive works only for a second.
  I have for it to turn by pressing the power button / stop for a long time and then run again without my work that has not been saved.

  Other times I'm having problems with turning it off. Wondows disconnects and the PC is pending for a long time with LCD on - logging off XP screen.

  I have instaled videoprt.sys update and the latest BIOS 1.60

  Thanks for help.

  Hello

  I'm don't know if this will help, but try to install Microsoft Windows XP KB917332. You can find it on http://www.laptopvideo2go.com/drivers/ms_kbs/

  Please report the results!
  Good luck!

• Satellite A500-18 x - don't wake up from sleep mode

  I've had this laptop for a little over a week and when it goes into mode 'sleep' trying to wake him up, all the lights on the keyboard lights up and I hear it works but the screen remains black. I updated display drivers and that fixed it for a few days but now it stopped working again. updated audio drivers would force it to not wake from sleep mode kos that he worked well, since I've updated the display driver and then yesterday I updated audio drivers and he returned to not wake up once again in mode 'sleep'. any help much apreciated.

  Updated the BIOS and update the driver to display again.
  Maybe the after the audio driver that something was wrong, you can clean the registry using CCleaner in most of the cases it s a good idea.

• Satellite A100-049 screen remains empty when reactivated from sleep mode

  Intermittently, have been left for a while my screen A100-049 remains empty when reactivated from sleep mode. It does not meet the access keys and have checked the settings which seem to agree.

  Notice that in this case the power button remains 'blue' and not to return to 'Orange flashing. Is this a common problem?

  Hello

  What do you with the mode 'sleep'? Do you mean the hibernation mode or the mode booth? What operating system do you use?

  Listen buddy. It's really not easy to say why it happens without running diagnostic tests. I think you should try to update the graphics driver and check if you are using the latest version of the BIOS. Two updates might be useful in resolving these issues

  Good luck

• Satellite L750 - does not wake from sleep mode

  Hello

  I just bought a Satellite L750 and he didn't wake up from sleep mode. I force with button stop / stop each time in switching mode 'sleep'.

  Any ideas?

  Are you using the original pre-installed OS that you got with your laptop?
  Have you noticed the same problem with the hibernation mode?

  Did you install additional software?