no blue print

Similar Questions

• OfficeJet Pro 8500: Office Jet Pro 8500 blue print as rose/violet-all ink cartridges are full?

  Something blue prints as a pink/purple color.  Recently replaced the Cyan cartridge.  No other cartridge is the replacement level yet.

  Ideas?

  Hi @KFDLou,

  Please try these steps and getting back to me.

  As indicated in the document "If there are still defects on the page after the print head has been cleaned once, go to solution to replace one or two print heads."

  Solution 6: replace one or two print heads

  If you have done all the troubleshooting steps and you are still experiencing a problem, replace the printhead.

• Photosmart 6510 B211a - I can't get BLUE print

  Printer is 4 months old. I just replaced the cartridges of HP to address real, but the BLUE doesn't. All cartridges replaced, blue does not.  I have made the clean print head test, ran the report of quality printer, but no blue appear.  The level of Est.Ink shows a full of BLUE cartridge, but is not blue print on the Test Page, either.

  Hello AJinSCV,

  Please make the "CLEAN printhead" for 2 times, which should solve the problem, that you are writing about.

  If the problem persists, you may need to call HP Tech Support (US) - 1-800-474-6836 , for assistance.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give a Kudos!
  I work for HP

• Forming a blue print somehow

  I'm sorry, but someone could help me with a problem I have? Actually, I am trying to learn how to take a picture of the hand and break it down into something of a wire frame model as if I was trying to make a blue print. However, I don't know what are the tools I need to use to perform these tasks, or where I have to really start.

  I tried to use a few filters and the wand feature but filters will eventually remove much detail or not enough. I need to keep important things like the contour of the nails and fingers, but I don't actually want to preserve everything Coloring only the outline of the nails, nuckles and so on. Well although it's almost like the title says I want to take a top-down view of the hand, its sides and front view and back down to a blue print or just the outline or important details.

  If someone could point me in the right direction or offer some advice it would be appreciated. I've attached one of the images that I'm learning to deal with. To all those who read this thank you for your time.

  You could try plugin remove white Mac to help remove the white areas

  then use the eraser or use a layer mask to remove the black

  you don't want areas. (installs in the folder plugin of photoshop elements)

  http://www.pspug.org/filters/filtersff.shtml

  After the filter and removing unwanted black areas:

  

  On a coloured background:

  

  MTSTUNER

• creepy blue prints photos

  When I print a picture of pictures I get strange blue overtones such as glasses of people resembling sunglasses blue

  and darker objects by turning a sort of fuzzy of electric blue.

  If I save the image in PDF format and print it there is no problem. I tested the printer in several ways and it works fine.

  OS X 10.11.3

  Canon's IP100 using the 11.7.1.0 version I reinstalled the software of the printer without effect.

  All ideas

  What is the source of the photos and what their color profile?

  LN

• Blue print in all colors

  Good evening, everyone.

  I have a printer J4680 AIO that I had for a while. Last night, I installed the new ink and ran a test page and it looked ok, but when I went to print a chart, I noticed that the colors were COMPLETELY shut down.

  I went online and print a test page which includes all colors including shade and hue of these colors.

  The result is... interesting...

  The yellow is a lime.

  Red is a deep blood red

  Magenta is magenta, but deeper... almost purple in hue

  Black is fine

  The Green is very good.

  Blue is fine

  Cyan is fine

  What it boils down to, is that cyan is printing in all colors.

  Anyone had this happen and have any idea of a resolution for this? I do a lot of graphic design and when I am doing a project that does not require my printer super high resolution (aka REALLY expensive of ink), I need it to be precise.

  EDIT:
  I should mention that I use ink official HP (901) so I know it is not the question (or shouldn't be).

  Be troubleshooting steps described here can help, it seems that you have in the mixture of the color cartridge.  It is unlikely that running a cleaning cycle will solve this problem, you will probably need a new cartridge.  You can check the warranty on the cartridge (valid even if the printer is no longer guaranteed) as indicated in the paper here.

  A new cartridge will almost certainly fix the problem.

• The blue print Pixma Pro 100 purple Canon. Help

  I just bought a Canon Pixma Pro 100 and I have problems with the color matching, specifically, fate blue violet.  I have a spyder express and have corrected my monitor color.  I had a problem earlier with this yellow, but I have very close with Print Studio Pro Player with lightroom.  Here are my settings and the specific screenshot. If anyone can help, that would be appreciated. Thank you

  You have run a nozzle check?

• Dell F4440 blue print instead of green

  Can someone tell me why my Dell F4440 printer prints green blue color? It starts only recently. Unfortunately I hit 40 photos before I realized what he was doing. He also had lines running through some of the pictures. They were, in some cases running diagonally and vertical in others. I changed the cartridges (twice) both black and color with the same result.

  From Internet Explorer

  Original title: printer

  Hi John,.

  Thanks for posting your query in Microsoft Community.

  It is a model of HP printer?

  According to the description of the problem, the question is very specific to the printer or print related settings of Windows Manager. At most, we could you to reinstall the printer drivers and check if the problem persists. If it's a HP Deskjet F4440 all-in-one printer, then you might check out the following link for drivers:

  HP Deskjet F4440 all-in - One Printer - drivers and software

  For more support, refer to the HP printer is supported.

  If, however, it is a Dell printer model, you can see the following to get your product automatically detected:

  Dell-Drivers and downloads

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• How it would be difficult to create this blue print effect from a photo of a person?

  http://lifepurposegroup.com/services/communication-blueprints/

  It is very easy, assuming you start with an image of a person isolated on a white background. I have attached a screenshot to show you how. Take a look in the layers panel.

  (1) bottom layer - use the find edges filter

  (2) 2nd layer - add a levels adjustment layer. The screenshot shows the properties of levels

  (3) upper layer - blue fill United set to the color blending Mode

  

• OfficeJet Pro X476dn: HP OJPro x 476 Ran out of black ink. To print the text in blue

  I have items/orders/faxes, I need to print.  I'm completely out of black ink.  Can I turn on the unit by default blue print?

  Hello

  The printer requires any ink cartridge and once any cartridge is exhausted (Out of Ink) you can print is no longer and the cartridge needs to be replaced to resume printing.

  As reference, see the following article:

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5276617&docid=emr_na-c03629143&docLocale=en_US

  Shlomi

• Blue does not print

  Office Pro L7680 about 4 years old - suddenly blue is not printing at all. Equip the new Blue cartridge, did not help. Diagnostic shows no no blue print.

  cherryjanet wrote:

  Office Pro L7680 about 4 years old - suddenly blue is not printing at all. Equip the new Blue cartridge, did not help. Diagnostic shows no no blue print.

  Hi, hopefully after you run a print head clean?

  http://support.HP.com/us-en/document/c01957673

  Ciara

• F2110 All In One HP: Printer prints blue instead of green

  I have an All In One older printer that worked perfectly for me. I tried to print something last night and every time the green color was susposed to print blue print instead. I replaced the color cartridge and still have blue instead of green. I tried everything I can think but can not get the printer to print in green. The strange thing is that I photocopied a picture with lots of greenery and it printed perfectly green.  Any ideas will be greatly appreciated.

  Hi @andalcam,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a printer all-in-one of HP Deskjet F2110 with computer Windows 10 and green print blue, but the colors are just when you copy. I would like to help with that.

  The fact that it can copy well little indicates that the printer should work. Here is a document of support designed to be used with this problem so you can be sure - colors wrong.

  Then download and run the HP print and Scan Doctor to verify installed software. This tool can diagnose and solve many problems of printing software and printer.

  Please let me know if that solves the problem, or if you need assistance.

• M276NW MFP: M276NW MFP prints only blue

  I bought all new ink and installed.  The control panel says we have ink, but it will only print blue.

  Hey @Thomasortho,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with blue print to your printer Laserjet M277nw range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve print quality problems with your printer.

  If after following the above you do not yet see the correct colors, printer or cartridge must be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP psc 2175 all-in-one not printing blue or yellow

  My trusty and reliable hp psc 2175 all-in-one prints wrong color.  It seems to access information or cyan or yellow and prints only in black (which is light) or magenta.  I changed both cartridges, and that did not help.  He keeps asking me to align the cartridges (which I did several times without success).  Any ideas as to what is happening and how to fix the problem?  Thank you!

  Hi myrl,.

  I understand that you are experiencing some problems get the blue print with your printer Photosmart 5520. I'm sorry to hear this has been a problem, but I'll certainly do my best to help!

  This document has a variety of measures to help get all the colors print for you again. I understand the title is not exactly what you're feeling, but it's the best material for you to follow.

  Hope this helps, have a nice day!

• Color Laserjet 4600 printing Cyan (blue) on the face back papers

  We have a Color Laserjet 4600 printer. For a long time, it has been printing cyan on the back of the documents that are printed.

  Recently, I cleaned the front "roller", which is long and looks like a long piece of rubber/plastic black thick.

  It printed fine for a few leaves, then again blue printing on the back of the paper. The front of the book seems perfect, however.

  I also noticed more cyan toner, which is "stuck" on the front "roller" of the printer.

  I went back to take a picture of him, but I couldn't find on the "roller" to show you.

  Here are some photos to show you what I mean:
  http://imgur.com/a/wBYxx

  What can I do to fix this?

  The part number of the kit is Q3668-67925. Very easy to replace. You just remove the screw at the top of both sides and just slide the old one out and put the new. You must first remove the top of the foot. If you have a crazy glue container, the people were able just to glue the broken pieces and put back once the glue has hardened.