no boot device after replacing the hard drive

Hello world!

My laptop (MSI) has erupted recently in my face (Fried GPU seems).  As I had and liked (Acer laptop) which had a broken hard drive, I have supported up to my datas and replaced the hard drive of Acer (one broken) with that of my MSI (latest laptop)

When I start the computer I get the message no bootable device: "no boot device - insert boot disk and press any key any."

I am not very savvy computer science, but I feel that it is perhaps due to the version of Windows I was using: my Acer running on Windows 7, when my MSI will run on window 8.  Could someone confirm if this has something to do with the startup problem?

Here's what I managed to do or find on the problem.

When I go into the BIOS, I changed the order of precedence so that my hard drive is the first priority.

There is absolutely no USB or SD card in my computer from where he might try to start (unless he's trying to start from an empty?).

The BIOS is able to tell me the model and I installed the hard disk MSI series so I guess that it is able to detect the hard drive, but can not find startup data in it (that's why I think it's maybe because it isn't the same window).  In addition, the hard drive lights up when I start the computer (and he did it on the MSI laptop too).

Even if the hard drive seems to be detected, I always tried to unplug and reconnect it a few times to make sure it wasn't just a matter of bad connection.

On many web sites, they recommend taking any diet and empty any current computer before restarting: unfortunately I can not do because the Acer laptop has a battery that is not easily accessible as newer computer (it cannot be removed from the outside, I need to open the laptop to get it and it is so I can know what it look like and how to remove it)

My brother managed to recover data from hard disk of MSI with a USB device that plugs on it, so I don't think it's broken.

The computer is an Acer Aspire 5830TG.  Replaced hard drive is a toshiba MK6459GSXP (works on Windows 7) and the replacement is a WD7500BPVX - 22JC3T0

I want to apologize if my English contains errors, it is not my mother tongue :)

Please let me know if you need more information and I thank you for your help!

Hello

You cannot move a hard drive with Windows 8 on it from a computer and put it in another machine that were previously running Windows 7 and expect it to work.

It will not.

@@@@@@@@@@@@@@@@@@@@@@@@@@@

And even if it would work physically, legally you cannot transfer the license of Windows 8 of the MSI laptop Acer laptop to your situation:

Read this information:

If the laptop came with the preinstalled Windows operating system (Dell, HP, Acer, etc.), this product key supplied with the laptop is preinstalled OEM license and is not transferable.

OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.

The above applies also to OEM system builders licenses.

License of operating system in detail, that you buy and install yourself, are allowed to be transferred to another machine.

And retail licenses also can be installed on a machine at one time.

___________________________________________________

And please read this, you can:

http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/licensing_faq.aspx#fBid=cbW6pY-wjS6

See you soon.

Tags: Windows

Similar Questions

  • Satellite L50D - Boot problems after replacing the hard drive

    I just upgraded my hard drive of the pathetic crod 5400 they provide to a SSHD@7200rpm, but now have a major issue.

    I initially image the operating system from the old hard drive to the new drive and have had chronic start-up problems (1-3-4 attempts to start to succeed if it fails at any time (often to the Toshiba start screen)).

    I reinstalled from a drive under Win 8.1 plain own ENT (trying to avoid the bloatware) and it is exactly the same number and is what I used to format the laptop very well with previously and had previously worked.

    I tried reformatting and reinstalling (by removing all partitions on each attempt) to the CSM, unsafe UEFI and UEFI secure. MCS is a straight line never works not proceed and both UEFI methods have the same exact result.

    I tried with original restore disks and it seems to work (not had time to fully test) but I don't want the bloatware and it shouldn't be serious since, if I were a customer who forgot to make restore disks (too often) and just have to have a failed hard drive or replaced sacrificed the laptop would be now a door stop.

    This seems as bad as Apple to lock people in.

    So I would appreciate ideas of people to please, I don't know if there is a program that is supposed to take place on a new drive as PS3 etc (I doubt it), but that leads me into the wall, and will be the last time that I consider Toshiba as anything other than a joke, if there is no solution.

    I had to replace the hard disks many times in my previous Toshiba laptops and were devoid of this crod, it has something to do with UEFI which seems more a nuisance than a help right now.

    TIA.

    Hello

    In my opinion, you should first check if the startup problem is related to the new installed HARD drive or new installed system.
    You said that the laptop fails to start up often to the Toshiba start screen.

    The splash screen appears during the POST (power on self-test) procedure. During this test, the material will be checked.
    I m wondering if the hybrid SSD/HDD isn't recognised by the BIOS during this particular step.

    From my point of few, this could be the reason why the system cannot be started.

    Another important note:
    The 8.1 win requires enable start secure as well as the UEFI boot mode.
    Therefore, you must enable both options in the BIOS.

    Last but not least check if you are using the latest BIOS version as latest firmware for the hybrid SSD/HDD

  • System Restore to factory settings after replacing the hard drive?

    I have a Lenovo ThinkCentre A52, which recently required a change of hard disk and the removal of a defective RAM 1 GB stick. When I bought my computer, it came with Windows XP Pro and the new hard drive that the updated computer has Windows XP Pro, but it seems to be missing a large part of the software (drivers and programs) that originally came with the computer, and even if I downloaded and installed most of them since the Lenovo Web site There are still some problems related to software that I can't fix. Ideally, I'd like to go back just to restore the system to the factory settings using the ThinkVantage Rescue and Recovery program, but I don't know if it will work. All programs and the necessary drivers will be installed again, even if my current hard drive is not 'knows' thereon? I need to get a Windows XP Pro installation CD, if I want to keep my operating system? Also, is it important that my current hard drive is half the previous, or that I now have half as much RAM?

    Thank you

    After replacing the hard drive, the only way to restore it to the State of the plant is using the Lenovo installation diskettes. You can also ask if Lenovo has a solution to your problem without having to reinstall Windows.

    You can download Lenovo drivers if they are not included on the installation disk. The size of your hard drive does not matter.

    Lenovo - call to order recovery disks:
    http://support.Lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=YaST-3P2QYL

  • How can I reinstall windows 7 after replacing the hard drive?

    How can I reinstall windows 7 after replacing the hard drive? do I have to call microsoft or I can retrieve it somehow to the old hard drive?

    Well, that certainly puts a different point of view on this subject.

    There are data recovery services that can recover data from disks that have suffered from various types of failures. However, they are quite expensive. Unless the data is particularly useful, it is generally not useful.

    If your Windows 7 is an OEM version, installed on the computer when you bought it, the manufacturer could have a recovery disk on sale. If it was a retail copy and you always have the appropriate product/serial number, you can get a DVD of their team of parts replacement.

    http://support.Microsoft.com/kb/326246

    Tom Ferguson

  • Cannot access through desktop remote after replacing the hard drive

    After replacing the hard drive, I can't access the computer via desktop remotely.  running Windows 7.  Settings of remote desktop access.  The firewall is disabled.

    Hello

    I appreciate the efforts that you put to publish the query on this forum.

    I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

    http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

    Please do not hesitate to contact us if you have other questions related to Windows.

  • Problems with folder permissions after replacing the hard drive

    Hello

    Recently, I replaced the hard drive on my mac.  Already before the replacement, I got the files that I had locked.  Now I'm unable to open the file.  I get the error "the folder 'nom_de_dossier' can not be opened because you don't have permission to see its content".  I looked at the permissions for the folder and everything he says is fetch.  I ran a command in the Terminal and for one of the records in question, that's what I see-

    drwxr-x - 13 501 501 442 5 July 2013 MG

    Any help would be greatly appreciated!

    Running OS X El Capitan

    10.11.4 version

    Try this first:

    Start the mac all holding the SHIFT key, it is slow, connection, and then select Restart from the Apple menu.

    When this does not help:

    Reset password utility in the recovery Partition:

    1. Restart your computer from the recovery partition.
    2. Open disk utility and run a repair permissions on your boot volume (in ElCapitan click the first aid tab). Once this completed, close disk utility. We do this for good measure.
    3. Open a Terminal from the Utilities menu. Type in resetpassword and select your user (NOT administrator system/root) account in the menu drop-down.
    4. Click on the Reset button at the bottom of the window ACL section and Reset the folder permissions.
    5. Exit the utility password and return to the main recovery menu.
    6. On your keyboard, press + Q and restart your computer. It is very important that you don't hold down the power button to exit the recovery session, or the ACL Reset to occur.
  • Cannot open my files money 2005 after replacing the hard drive

    Hi, I had to replace the hard drive in my computer and now I am unable to open my money (Version 2005) files. I get an error message indicating "Money cannot locate C:\~~~ or cannot open it, possibly because it is a read-only file or you are not allowed to change it or your hard drive, it is write protected etc.» I tried uninstalling and re-installing the money, but it has not solved the problem. The problem may be to do with the regional settings during installation of money, but when I re - install the money it is not giving me the option to set the perameters during the installation process for a reason any. My OS is XP Home edition Service Pack 3. How can I solve this problem?

    So your real problem is not that the files are missing or read-only, but that the money does not recognize the format the files are in.

    Even if you reinstalled Money, maybe you don't have also downloaded and installed some updates have been released for your version.  See http://support.microsoft.com/kb/320193:

    If you are using Microsoft Money 2005, and you receive this error message after you have reinstalled Money, the behavior may be caused by not having money is not all installed updates.

    See methods 4 and 5 in the article.

    If this does not help, Veritas Aquitas had the right answer: ask in the forum of the money:
    http://social.Microsoft.com/forums/is/money/threads

  • How can I reinstall windows after replacing the hard drive? Laptop did not come with a disc.

    My internal hard drive went bad in my laptop, easy to replace and relatively inexpensive. However, the laptop came not with the windows disk. So, how can I reinstall windows once I replaced the hard drive?

    Basically, you have two choices. You can communicate with the person who made the computer and see if they can provide either a set of Windows Vista restore disks (I would assume) or an installation for Windows Vista (probably OEM) DVD. If the second choice, determine if you will need to download device drivers or software packages from their web site. OR, you can purchase the operating system of your choice, retail. The wisdom is that, if this is your choice, you see if you will need the device drivers and get those of the web site of the manufacturer.

    Once you have the disks, install in the usual way.

    Tom Ferguson

  • Restore questions after replacing the hard drive

    I have created a backup image and restore full of my computer after getting the hard drive errors via the MS utility on a USB key.  I replaced the hard drive internal and restored Vista using recovery disks.  Now when I want to restore the backup, Windows is not recognize files of backup/recovery.  What am I supposed to do?

    Hello

     
    Since you have replaced the hard drive and you try to install Windows on the new drive. Whenever the hard drive is replaced, the operating system must be reinstalled and restore all data you have saved

    You can check out the link and check if it helps:
    Restore files from a backup
    http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
     
    If the previous step fails, then try to restore the files by using the Windows recovery options using the link below.
    Restore your computer from a system image backup
    http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

    Also check out the link:

     
  • This copy of Windows is not genuine after replacing the hard drive

    Hello, I bought a copy of windows 7 Home. My hard drive crashed. replaced the hard drive, now it tells me that windows is authentic noty. How can I fix it?

    So that we can analyze and solve a problem of non-genuine notification you can experience, download and run it Microsoft Genuine Advantage diagnostic tool . 

    After you run the tool, click on the button continue, then click on the copy button, then paste the report into your post.  In addition, please include a brief question or relevant information that might be helpful in our efforts to help you.

    Thank you!

    Carey Frisch

  • Error: 150:30 after replacing the hard drive

    After replacing my hard drive of Apple iMac (Apple remember), I get an error code 150:30 when trying to open Photoshop CSCS4. Spin OSX 10.11.1

    All solutions?

    John

    150:30 errors mean that the licensing mechanism is broken, usually because the software moved instead of being re-installed.

    Uninstall, reinstall from the disc or download then enter your serial number.

    Download the CS4 products

  • Failed to retrieve after replacing the hard drive on my DV6

    I replaced the hard drive on my DV6.  Insert the recovery discs, I had done and went through the process.  At the end it rebooted and was told that he failed.  Says to put 1 recovery disc in and try again, but just a loop even message.

    Hello

    Assuming that it's just a problem with the recovery media, here's another solution, you can try.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software offerings when you install ImgBurn) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Windows Image is Digital River.

    Windows 7 Home Premium 64 bit SP1.

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    All pilots additional and the software, you may need can be found here.

    Kind regards

    DP - K

  • Failed to load a backup disk after replacing the hard drive.

    Until I replaced the hard drive, I backed up everything on a disc using the Vista backup program. Now I am trying to get at the way it has been, but I don't know how. Help?

    Start, programs, accessories, System Tools, backup status and Configuration.

  • Reinstalling Windows 8 (or 10) after replacing the hard drive

    I need to replace the hard drive on my Inspiron 13-5323.  It came with the factory "injected" Windows 8 on the motherboard. Subsequently, I've upgraded to 8.1 Windows, then Windows 10.  With no Windows disk and no product key, how can I reinstall Windows on the new drive?

    Illinichip

    The product key is embedded in the UEFI BIOS, it will automatically be entered with Windows 8.1 (with update 2 media) or Windows 10 TH2 installation media. Follow the instructions here to download and create a Bootable USB (for UEFI BIOS):

    https://www.YouTube.com/playlist?list=PL1RkaknDn7v-Ucth4gt0U3BHVSY7oNkWr

    http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

  • Windows 8 license after replacing the HARD drive

    Original title: change of equipment (HARD drive)

    Good night, I have a computer laptop windows 8 and I fear that the HARD drive (malfunction) he'll need replacement.

    My question is, what will happen to my windows 8 license, once my current HARD drive stop working (because the key is encrypted in the bios)?  
    Please note that in the country where I live customer support is, at best, ineffective, so personal attention is not an option.
    Thank you before hand.
    Send you my best regards.

    Hi, Caesar,

    Activation pairs your product key in your hardware configuration and helps to verify that your copy of Windows is not been used on more computers than to allow the 3668Microsoft Software License Terms.

    If you change the hardware on your PC, you must contact support to activate Windows by phone.

    As you have decided to replace the hard drive, you could face an activation/Windows not genuine error.  You can follow these steps to make a phone activation.

    a. press Windows key + X , then click run, then type: slui.exe 4

    b. press the ENTER key

    c. Select your country from the list.

    d. choose telephone activation .

    e. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

    f. explain your problem to the support person

    See the article:
    How to activate a Microsoft product using Microsoft Product Activation Center

    http://support.Microsoft.com/kb/950929/en-us

    In addition, refer to this topic:
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/hardware-changes-no-more-activations-available/ed283ad6-D462-478f-a1a0-8922226ce82b

    Hope this information helps.  If you have any other questions, we would be happy to help you.

Maybe you are looking for

  • I need help understanding Time Machine.

    I've got 2 MacBooks, 1 desktop computer Mac G5 and an external HD to 3 TB (Seagate). Can I save all 3 HDs to an external HD? And what will happen if I delete entire folders of an original HD? The backup will keep all those the next time I'm back up?

  • automatically deleted from the Inbox shortly after the arrival of messages

    All the messages in my Inbox on my desktop get automatically removed shortly after arrival. They do not yet appear in the junk or deleted either message box! The activity Manager just says: '1 message deleted from the Inbox.Any help would be apprecia

  • Import records Photos

    My camera has a fancy feature that allows me to group photos into folders.  It's really convenient when I take pictures of several different items at the same time.  For example, 5 pictures of my daughter, then my car, my house, 7 10 15 my daughter,

  • Satellite L500-1TU - BIOS update error

    Hello, today I was updating my drivers and when I started on my bios it crashed while it was up-to-date. After waitting for a long time and see the computer crashed, I turned it off. Surprise, surprise, when I turn it on I don't see a black screen. I

  • LabVIEW FPGA compile Cloud Computing Service stuck on the production of carrots

    Hello Since I was on windows 8 I do use cloud server compile compile my screws However, lately he has been slain a lot during production of carrots. Is that what I can do to get rid of this problem? Sometimes it just doenst seem to compile at all but