no boot device found message after that finishing recovery disks and restart...
I recently bought a new Wester Digital hard drive my laptop HP provided with is death/failed, but now I have no found boot device / error message even after complete installation floppies and disk 4 is ejected. He did the whole insert the disc 1, 2, 3 and 4, and he went to 100%, then said to remove recovery media and press on continue, so that he can restart and complete the process, but it just reboots the computer, gets the no boot message device and stays there. There's too much during the night and still the same message. After disc 4 finished what she also said not to touch anything or do something, so I did everything, he said to do. The hard drive is new, as I said, and is the same 500 GB which was the one I replaced. The recovery disc were not created by me, they came with my laptop when I bought from futureshop in late October 2010. It is out of warranty too, that's why I'm looking for a solution...
Any help would be welcome...
I did something else I looked and everything got up and running, so it's all good now.
Tags: Notebooks
Similar Questions
-
HP pavlion 15: Please HELP NO BOOT DEVICE FOUND
I have a hp laptop that says no boot device found I checked the bios on that everything was the same so I won't change anything and I went to system dignotcts it wouldint work, that I keep for a day and today I keep the battary on the 5 min a6 and I put back my laptop truned it once again, and when he returned to no devices found Boot sccern I clicked on before F2 was a black is a blue fantasy the left now, and then Pentecost on the other one i made the screen a chip test passad I did another test it passed now what I do?
If troubleshooting does not solve your problem, you need to perform a factory restore or using the partition recovery or recovery discs I hope that you created when you first got the computer:
-
BCA install Win 10 since El Capitan "no boot device found". »
I ran a Boot Camp for Windows 10 installation process using this configuration:
MacPro3, 1
El Capitan 10.11.2.
Win10_1511_English_x64.
Boot Camp Assistant 6.0.0
I used a flash drive USB 2 for the installation disc.
I modified the plist BCA as shown here:
http://Tsentas.NET/create-a-Windows-7-or-later-version-install-disk-missing-on-e l-capitan.
BCA works well, downloads support, creates what looks like appropriate on the USB installation files, and then create a MS-DOS (FAT32) partition on a hard disk that is dedicated in an internal Bay. At this point, it seems to be trying to boot from a Windows installation process and rise black screen "no boot device found... etc."
Any idea whats up?
Thank you, Bruce T
Create a USB key modifying the Info.plist file does not work? There is a reason that it's missing at first, meaning that your specific model, with an integrated optical drive, needs to use a physical DVD. You can burn a DVD from ISO?
Be aware that a 2008 MP has no W10 driver supported by Apple. A list of Macs Apple officially support it to use 10 Windows on your Mac with Boot Camp - Apple Support .
-
W95 installation fails-"no boot device found" / "not received no boot file name.
I bought Windows Vista Home Premium Upgrade, which requires that a BONE House early to be installed before it will be to be installed. So, I need to install Windows 95, the only other version of windows 'House' that I have, before I can install Vista.
Unfortunately, no matter what I try (install from CD with auto detect, install from the CD with the specification of physical drive, install from disk image), I get the error "no boot file received" Windows and then the "no boot device found" error on VMWare. It is with version 2.02, running in OSX 10.5.6.
Can anyone help?
Thank you.
First Windows 95 isn't eligible OS to upgrade to Vista from and regarding Windows Vista Home Premium Upgrade you can only do a place in family Windows XP Edition upgrade and Windows XP Media Center, which means any other previous operating system will have to be removed before you can install.
In any case we say used to be able to install Windows Vista directly from an upgrade, even if it was with the original version and I n not know if it works with an SP1 DVD but take a look on: How to Clean install Windows Vista with upgrade media
-
Receive the error message after that firewall creative cloud update changes to our network.
Receive the error message after that firewall creative cloud update changes to our network.
We have a user, who tries to update through the creative application of cloud. We tried to find what is blocked but have met a dead end.
When the cloud creative software attempts to shout that we see a connection attempt https://ops:443 / ims/token/v1
I did some research and the only reference to the IMS for Adobe, I could find was the IMSService. This seems to be an authentication service. The problem is that "ops" are not a valid domain.
This issue seems to only affect the Creative Software of clouds as I was able to update a test computer with Creative Cloud via Adobe Application Manager.
The user's system and our test system are running OS X Yosemite
Hello
Can you please check is below the links with white combination ports on your firewall. Adobe creative cloud desktop application uses these ports only.
Address Ports ccmdls.Adobe.com 443 IMS - na1.adobelogin.com 80 443 IMS - prod06.adobelogin.com 443 na1r.Services.Adobe.com 80 443 prod-rel-ffc - ccm.oobesaas.adobe.com 443 prod-rel - ffc.oobesaas.adobe.com 443 LM.licenses.adobe.com 80 443 ccmdl.Adobe.com 80 swupmf.Adobe.com 80 swupdl.Adobe.com 80 ACP.adobeoobe.com 443
interaction.Adobe.com 443
Thank you
Ashish
-
Jin
Sometimes, my keyboard stops responding, despite the checkist troubleshooting.
Then it works again after I have shut down and restart my mac!
is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the time... also openoffice document prog...
What else could be?
I just replace the keyboard with a new one, but the problem persists.
my mac has also been in mac repair and they found nothing wrong.
Thank you!
Please run and view a report of EtreCheck http://etrecheck.com/
-
I'm trying to export contacts as vcards icloud. However, after that select the contacts and click on "Export as vcards" nothing happens. Why? I tried this using edge and chrome and I run Windows 10
I just tried with edge on Windows 10. I selected all the contacts, and then click Export, as vCards and nothing happen. Clicked on it again, still nothing. After 4 or 5 click on about 10 to 15 seconds he finally uploaded to the file Edge uses for downloads. I saw it happen before you go to a Mac using the Safari browser, but only 2 clicks were necessary.
-
I get a pop up message that my recovery disk is full. I have 5 gig is nearly full. How can I clean? Can I remove things in there?
Looks like the files created by Norton 360.gr you have chance have it installed or once were? It should be safe to delete.
-
My photoshop has been removed after that my computer has been restarted. How can I recover my photoshop.
You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked
Download & install instructions https://forums.adobe.com/thread/2003339 can help
-includes a link to access a page to download the Adobe programs if you do not have a disk or drive
Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq
-
in the blue screen it rights something that suddenly turns off and restarts again.
in the blue screen that he rights something that suddenly turns off and restarts again.my at startup of windows and after it notifies wait me and it stays like that for a long time and restarts again. Help
Hello
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Impossible to put the recovery disk and Boot/BCD error
Hello
I have several problems, I hope someone can help me.
While on vacation 7/12, I bought a HP 2000 - 368WM NotebookWindows 7Home Prem 64.eu at the time of the purchase, I did a recovery disk.
1. After returning, I partitioned the drive, forget the hidden partitions. The disc changed to Dynamic.I, then removed the new partition. OK no problem, start Windows and I have used laptop with no problems.
2. this weekend I tried to go back to the factory install and meeting boot\bcd error: 0xc000225 when I F11. The other F1 and F9 options work.
3.I tried to make recovery disks and there no 3 x 1 disk check. HP Recovery Manager - system recovery, restore your computer to the original factory State is disabled.
What are my options now?
I can start and use Windows normally.
Under computer management, when I right click on the drive of Reactivare recovery disk is gray.
Thanks in advance for your help.
Miss N
Hello cloud
I still couldn't see your link, but I searched and found this, http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
I used one, no option 3, and it worked like a charm. My drive is now in Basic system recovery option is returned in the HP Recovery Manager and I can boot into F11. So Bravo to you for motivating me to look for. Thank you. I did my recovery discs and all is well int universe. :-)
Thank you
Miss N
P.S. No lost files, it took 2 minutes to do. I am very happy.
-
Core leader Missing, insert boot disk and restart
amerirish50,
Demarrer start from your XP CD in Recovery Console, and then run the following command
sfc/scannow (you will need an XP CD for this command)
If that is not correct the problem, then you can try to perform a repair installation.
Windows XP installation options
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows recovery disc 32-bit error code meaning version question
Hello
I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?You don't give any info on what was the original problem with the computer.
You have set the Bios Setup to boot from the CD/DVD drive?
At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.
And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?
Use up arrow key to do this, press on enter.
Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.
See you soon.
Mick Murphy - Microsoft partner
-
"Boot device not found" Message After BIOS Update
Today I was invited by the HP Support Assistant software that a BIOS update was available, so I got the application download and install the update. When the computer is back to the top, it says the boot device is not found.
Ugh.
Can someone help me with this?
I have a HP ENVY TouchSmart m7-j010dx Notebook PC running Windows 8.1. Laptop was working fine before the update, which means that I probably would not have allowed the update of the BIOS.
I found the problem (for me, anyway).
1) go into the BIOS (F10 from your black screen) configuration settings.
(2) fix the "Legacy Boot Options" and save your changes.
As soon as I did it, it starts immediately in Windows.
-
I have HP notebook: no boot device found after the death of the computer during the update
During an update my PC is dead, I know it must have been plugged and now boots to no device found startup please install an operating system on your hard drive
Hello
Try the following.
First, use another PC to create a bootable Windows 10 DVD or a USB Flash drive via the following link. Under the section "Imperative to create a cable USB, DVD or ISO", download the media creation tool.
http://www.Microsoft.com/en-us/software-download/Windows10
Once you have it, run the tool, select 'Create the installation media for another PC', then select the language edition of Windows 10 and 64-bit.
Follow the rest of the guests to create this and then click on finish when done.
Insert the Installation of Windows 10 support and stop the laptop by pressing the power button for 10 seconds.
Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).
Use the arrow keys to highlight the CDROM (uefi) or USB Flash Driver (uefi) option, according to which typre of media you created, then click on enter – if you are prompted to "Press any key to continue...". "- make.
Start on the Menu of Boot Options Advanced - see Option 5 on the link below for more information on access to this.
http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-Windows-10-a.html#Option5
Then try to run the system restore Windows to return the laptop to a point in time before that happen this isssue - see Option 1 on the link below for more information on this procedure.
http://www.tenforums.com/tutorials/4588-system-restore-Windows-10-a.html
Kind regards
DP - K
Maybe you are looking for
-
How to detect the change of focus between applications
LV2013, Win7 I have a long operation that so I have to. Let's call it a "scan". I start to a particular folder on the disc and look for files within this framework and in those folders, etc. I am looking for a particular file (*.lvlibp). When I fi
-
I get disable key 93979652 systems after failing to remember my password! Any help guys?
-
Your technical support does not recoginize my product code.
Microphone is not recognized by VISTA - on map 2 & 4 microphone. It's a VISTA issue. Just got new PC from Cyberpower PC in April 2009. Very disappointed that Microsoft is ready to scrap VISTA - would be to wait. I've done a clean install twice. You w
-
Original title: program transfer after accident? Computer XP crashed yesterday. I am up and goes on (new) another one, also XP. I plugged the old drive hard as long as primary and secondary road, tried to reinstall XP on the old disk, failed in both
-
Resolution problem not allowing the installation of software on HP mini 110-1025DX
I read the online help and followed the instructions to fix the problem. BUT 1. click the settings tab, click Options at the bottom of the window. A new window opens to adjust the settings of the monitor. 2. click on the monitor tab, button list