Similar Questions

• Configuration of the basic Source of time to master for the 9234

  I have several cDAQ modules I use to collect data.  I use vi to Write can Express to save data to a file of PDM.

  When you examine the recorded data files, the measured data from NI 9215 provide pleasant timestamps to match how the DAQmx task has been set up--delaying the sampling frequency of 1000 with a 1 ms in the While loop.  However, although in the same vi - different tasks, but the same while loop - horodateurs of the NI 9234 do not correspond to the task of DAQmx implemented - sampling frequency of 1000 with a 1ms delay. After reading the material provided with the NI 9234, I found that maybe the machine clean master Timebase Source. There were documents that says he can be configured to be originally of Timebase of Master for the other modules:

  Configuration of the basic Source of time of the master for the NI 9234 (Interface FPGA)

  It is desirable to have the timestamps for data measured across all modules to match. We do not have the FPGA Module for LabVIEW. Is there a method in LabVIEW for all modules use the same master time base Source?  I assumed that because all the data collection has place in the same while loop by using the time delay of 1 ms it was forced through the code. This hypothesis seems incorrect from my review of the PDM data files.

  The NI 9204 provides a trigger only.

  Software:

  Windows 7

  LabVIEW 2010 SP1

  Material:

  CDAQ-9174 chassis

  Slot 1: NEITHER 9204

  Slot 2: NEITHER 9215

  Slot 3: NEITHER 9234

  Slot 4; Vacuum

  Hi MgDAQ,

  An important concept to note is that the 9234 uses a delta-sigma converter and a clock of oversampling to read analog data. There is an inherent delay of entry due to analog and digital filtering built-in. Since the 9215 has a lower resolution there will be a lag the 9234 and 9215 finished. I've included some resources below:

  What are the for the NI 9233, NI 9234, and NI 9237 valid sampling rates? : http://digital.ni.com/public.nsf/allkb/593CC07F76B1405A862570DE005F6836?OpenDocument

  
  

  Synchronization of DSA, S and X series devices with a NEITHER-DAQmx single task series: http://digital.ni.com/public.nsf/websearch/78E44565FD87E7D686257108007F94F8?OpenDocument

  
  

  Synchronization with NOR-DAQmx of acquiring dynamic signals (DSA) products:http://digital.ni.com/public.nsf/allkb/A133ED27DF9BCC5986256F2E004BA342?OpenDocument

  Have you tried to put two modules in the same spot? Alternatively, you can export the sample clock 9234 and tasks installation separately.

  Best,

  CARISA

• Access Configuration for the Windows 7 system

  How can I get to the configuration of the system from the control panel in windows 7?

  Thanks for posting your question on the Microsoft Community.

  To start the configuration of the system = button start the SSPE and type "SystemConfiguration.

  It will be the first to come programt.

  To view your information & system properties on your desktop / laptop =.

  Press start - right click computer downstairs. properties

  I hope this helps, please feel free to post back here or start a new question.

  Thank you very much

  Francis.

• Configuration of the network operating system

  Dear administrators,
  
  We took the 11.2.0.3 on RHEL 6.1 Oracle database.
  
  I intend to get suggestions regarding:
  Should we join the machine above an existing Windows 2003 domain (Active Directory)?
  or
  Set up as a stand-alone server?
  
  
  Rgds,
  
  Ahmer

  to be honest, I don't see any pros for adding a Linux server with Oracle for Windows AD, its just extra work/administration without benefits database
  unless you want to AD authentication for the operating system (no database) running on the Linux server...

• Time of CPU system (%) for the basic multi system

  Hello
  
  couple of questions about sub settings, measure processor or avg unique all the processorss and the processors use?
  for example I will receive alert time system CPU over 95% for the unique processors? or not
  
  Idle time (%) of the CPU
  Time CPU system (%)
  Time CPU user (%)

  couple of questions about sub settings, measure processor or avg unique all the processorss and the processors use?

  CPU utilization (%)
  For UNIX platforms, this measure represents the amount of CPU utilization in percentage of total CPU available processing power.

  http://docs.Oracle.com/CD/B28359_01/server.111/b28282/monitor.htm#CFAECIDG

• Configure button disabled on the playback device, manage audio devices. How can I reactivate the button Configure?

  Hi, following an automatic update of Windows Vista 64-bit I have no sound. Thank you for that.   I had a similar problem before, the sound quality has been reduced to a rate lower than 16 bit 44.1 k.  I've changed this before clicking on the button configure on the playback device, manage audio devices.  But now, this button is disabled and I can't check the set up or make changes.  I am logged in as an administrator user, how to re - activate the button set up?

  Thank you

  Darren

  Hello, I have stopped the Windows Audio Service and rebooted a couple of times.  Now I have his back.

  Thank you

• There is no button "Close, restore down, minimize" on top of the FF4, my system is win7 how can I do with it

  There is no button "Close, restore down, minimize" on top of the FF4, my system is win7 how can I do with it

  This has happened

  Each time Firefox opened

  == I installed the FF4

  If you have an installed character you can turn it off and go back to the default theme. There is a bug with Firefox 4.0b1 and probably it will be fixed in the next beta. Here are the bugs.

  Bug 574833
  Bug 575406

• Configuration of the multimedia buttons Qosmio F50 - 10M

  Hello people,

  I ve only got a 'simple' question Is it possible to configure the multimedia buttons to launch and control winamp or any similar program?

  Thanks in advance for your time and the solution to my problem (if there is ;-))

  Greetz

  Well, you could configure the media button to start WinAmp or another application.

  So if you want to configure this button can access the assistance of Toshiba.
  Choose Optimize-> Toshiba button support

  There, you have to first choose the button that you want to configure. And then tap the application .exe file using the key BOWSE.
  In addition, you can describe the new features of button in the Description field.

  Good bye

• Try to use Windows Update to install 2 updates, get "updates are not configured correctly. Restoration of the changes

  Try to use Windows Update to install 2 updates (Windows Internet Explorer 9 for Windows Vista) and an a security update Cumulative for Internet Explorer 8 for Windows Vista KB253048. It's on a laptop at home unique stand alone, works with Windows Vista Home Premium SP2.

  Windows Update initially reported two updates correctly installed and asks me to restart the PC, what I'm doing. Before the connection at the reboot prompt, I get a message saying "updates are not configured correctly. Restoration of the changes. It is the next messages saying: step 1/2/3 of 3 0% complete.
  After I then connect I get the message ' Windows to not install important updates.

  Update history reveals the KB253048 cannot install (error 80070005), but IE9 installed successfully. However when click on the IE icon and run Internet Explorer version 8 of Internet Explorer, I get, not version 9.

  I tried to do this several times on 2 days, but get same problem.

  This gives a shot.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately!
  
  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. IMPORTANT - DON'T SKIP THIS STEP! Open Internet Explorer, to http://support.microsoft.com/kb/971058 of => & run who fix it in methods AGGRESSIVE then by DEFAULT. [1]

  10. restart one last & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  =======================================
  WARNING: MS MVPs represent or work for Microsoft
  http://MVP.support.Microsoft.com/GP/mvpfaqs

• [Cisco FAQ] - how to back UP and RESTORE the configuration of the RFGW1?

  I want Backup and restore my RFGW1

  Go to the SYSTEM tab, and then choose the CONFIGURATION of the BACKUP or RESTORE the CONFIGURATION

  The chassis settings backup is also written to the FTP server préfixons. The backup file is generated and consists of the IP address of the chassis and the date.  Below is an example of the name of the backup file.

  cfg_10_90_140_15_07_06_2012.gz

  Settings for the FTP server are located at the bottom of the page. Click on 'display the FTP settings '.

• Is there a process or program that I can use to restore the system and configuration of the system to the original

  Hello

  I would like to know if there is a microsoft tool or a suggested list of Microsoft that could help me restore the system and the system configuration files in the appropriate State. is not the restoration of the system. I don't know of retoring my computer to an earlier time, nor on the restoration of computer purchase. 

  I thought that my computer has been compromised in some way, and the intruder was accessing my unit via some sort of connection distance.

  I received the support of the malicious software company, and I think that my computer is fine now.

  And so the question with which I opened this post: I would like to know if there is a Microsoft tool or a suggested list of Microsoft that would help me to restore the system and the system configuration files in the appropriate State. I'm not taling about system restore. I speak not of retoring my computer to an earlier time.

  Whenever I start to notice the strange behaviour of my computer, I would like to launch this program and follow this procedure to reset all the settings and files to a suitable State. The reason why run alone to detect malware problems, and that if there is remote access to my computer inadvertently, the intruder can do a lot of editing of files which is not identified by the malware. and I believe that if I was able to run a program like this, all the changes took place, which expose my device, but the rules of behavior systems can be reversed for a proper state.

  I read an article on how to repair my operating system, but it forced me to get a copy of it; However, given that the supplied operating system with preinstalled on this computer, I could not follow the instructions. Article I read to all system and configuration files that meet the standards of the manufacturer, without losing files and installed programs.

  Thank you

  Hello

  Already, you mention that you can do; either a repair installation.

  "How to do a repair installation to repair Windows 7"
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  And make sure that read you all the information under 'warning'.

  It also tells you what drives you can and cannot use to do.

  ________________________________________________

  You can use this to fix the corrupted system files.

  "Command SFC/scannow - System File Checker.

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  «Use the System File Checker tool to repair missing or corrupted system files»

  http://support.Microsoft.com/kb/929833/en-us

  But if SFC detect serious errors in the file system, you may need to do a repair installation as in the instructions in the first part of this answer.

  See you soon.

• Restore the configuration of the AIP-SSM20?

  Hi there

  I have a small problem here - we are in the phase inupgrading of our Firewall to a set of 5510 with SSM10 to a set of 5520 with SSM20 - and I expected, it was quite simple just restore the current configuration of the SSM10 on the SSM20'- and weel - looks too so when I copy everything my server configuration ftp in backup-config and then load the backup current config with deletion - but when I look at by the After he was replaced in the configuration of the network?

  I use the version 7.04 (E4) the kernel he...

  The anyoine there have attempted to backup and restore the complete configuration - without problems?

  If I copy the restored configuration back and do a diff on them the difference lies in the service host section:

  2V2

  < !="" current="" configuration="" last="" modified="" wed="" jun="" 22="" 23:42:31="">

  ---

  > ! Current configuration changed the sea Mar 30 15:03:54 2011

  8 C 8

  < !    ="" signature="" update   ="" s573.0  ="">

  ---

  > !     Update of the signature S561.0 2011-04-20

  34 c 34

  < service="">

  ---

  > service host

  36 c 36, 38

  < host-ip="">

  ---

  > host-ip x.x.x.42/24,x.x.x.1

  > host name of fw_pri Internet service provider

  > telnet-option enabled

  a 37, 40, 54

  > dns primary server enabled

  > address 8.8.8.8

  > output

  > dns server secondary disabled

  > dns server service disabled

  > output

  > time-zone settings

  > offset 60

  > standard time - GMT + 01:00 area name

  > output

  > ntp-option enabled-ntp-no authenticated

  > ntp server - 193.162.145.130

  > output

  > automatic update

  > cisco-server disabled

  is this a known issue?

  best regards /ti

  we are in the phase inupgrading our firewalls from a set of 5510 with SSM10 to a set of 5520 with SSM20 - and I expected it was quite simple just to restore the current config from the SSM10 on the SSM20'es

  Fix. You should be able to restore a backup of configuration of the sensor of the AIP-SSM-10 on a module of sensor AIP-SSM-20 without much trouble, although hardware-wise that the AIP-SSM-20 are more able/powerful, there is no difference in the interface (or quantity) naming conventions, etc. that was displayed in the configuration.

  I expected it was quite simple just to restore the current config from the SSM10 on the SSM20'es - and weel - it also looks so when I first copy the config from my ftp-server to the backup-config and then load the backup to current config with erase - but when I afterwards look in the network configuration it has been replaced?

  I'm not sure that I followed exactly the procedure that you tried, but you should be able to back up the current configuration of the AIP-SSM-10 sensor module to a remote server, and then copy from the remote server to sensor AIP-SSM-20 module. Example:

  AIP-ssm-10 # copy current config

  AIP-ssm-20 # copy current-config /erase

  NOTE: The parameter/erase applies only to the current config. If specified for the current-configdestination, the configuration of the source is applied to the default configuration of the system. If it is not specified for the current-configdestination, the configuration of the source is merged with the current config. Maybe that is part of the confusion?

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

  Former title: windows 8

  Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

  Hello

  Please contact Microsoft Community.

  We understand the inconvenience that you are experiencing.

  1. How long it stays on the same screen?
  2. Windows Update is causing this issue?
  3. Have you tried to interrupt the installation at any time?

  When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

  Please see the article below and see if this can help you.

  https://support.Microsoft.com/en-us/KB/949358

  Let us know if you need assistance.

• "Configuration of the Windows updates failed. Restoration of the changes

  Configuration of the failure of the updates are happening all the time and takes a long time to restore updates. Please tell us how can I prevent automatic updates.

  To avoid failure, follow these steps:

  "Configuration of the Windows updates failed. Restoration of the changes

• After doing a "clean boot" and then begins a reset, how do I activate the starting aps in the Configuration of the system when the "Activate" button is low?

  I just ran a "clean boot" on Windows 8.  Now, I'm trying to reset my computer but when I enter msconfig - System Configuration - Services - the "Hide all Microsoft Services" checkbox is more verified and the "Disabled" button is available, the button "Activate" is low.  According to the instructions on support.microsoft.com/kb/929135 should show the opposite, and I have to uncheck 'Hide' and 'Activate' all access points.  What can I do to activate the aps and finish reset correctly.

  Hello

  Are you trying to reset the computer to start normally after a boot minimum troubleshooting?

  If Yes, then I would like to inform you that once you select Normal startup under Startup selection all services and startup items will be automatically activated. You just need to restart the computer to start the computer normally.

  Please answer us on the State of the question to help you further.