no client AnyConnect vpn internet access

AnyConnect vpn client no internet no access.

Here is the configuration. Help, please.

Thank you

Jessie

ASA Version 8.2 (1)

!

hostname ciscoasa5505

!

interface Vlan1

nameif inside

security-level 100

IP 172.16.0.1 255.255.0.0

!

interface Vlan2

nameif outside

security-level 0

IP address 69.x.x.54 255.255.255.248

!

interface Vlan5

Shutdown

prior to interface Vlan1

nameif dmz

security-level 50

DHCP IP address

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

passive FTP mode

DNS lookup field inside

DNS domain-lookup outside

DNS server-group DefaultDNS

Server name 172.16.0.2

Server name 69.x.x.6

object-group Protocol TCPUDP

object-protocol udp

object-tcp protocol

object-group service TS-777-tcp - udp

port-object eq 777

object-group service Graphon tcp - udp

port-object eq 491

object-group service TS-778-tcp - udp

port-object eq 778

object-group service moodle tcp - udp

port-object eq 5801

object-group service moodle-5801 tcp - udp

port-object eq 5801

object-group service 587 smtp tcp - udp

EQ port 587 object

outside_access_in list extended access permit tcp any host 69.x.x.50 eq imap4

outside_access_in list extended access permit tcp any host 69.x.x.52 eq ftp

outside_access_in list extended access allowed object-group TCPUDP any object-group of 69.x.x.50 host smtp-587

outside_access_in list extended access permit tcp any host 69.x.x.52 eq telnet

outside_access_in list extended access permit tcp any host 69.x.x.52 eq ssh

outside_access_in list extended access allowed object-group TCPUDP any host object-group moodle-5801 69.x.x.52

outside_access_in list extended access permit tcp any host 69.x.x.52 eq smtp

outside_access_in list extended access permit tcp any host 69.x.x.52 eq https

outside_access_in list extended access permit tcp any host 69.x.x.52 eq www

outside_access_in list extended access permit tcp any host 69.x.x.50 eq ftp

outside_access_in list extended access permit tcp any host 69.x.x.50 eq smtp

outside_access_in list extended access permit tcp any host 69.x.x.50 eq pop3

outside_access_in list extended access allowed object-group TCPUDP any host 69.x.x.50 EQ field

outside_access_in list extended access permit tcp any host 69.x.x.50 eq https

outside_access_in list extended access permit tcp any host 69.x.x.50 eq www

outside_access_in list extended access allowed object-group TCPUDP any host 69.x.x.51 EQ field

outside_access_in list extended access allowed object-group TCPUDP any host TS-778 69.x.x.51 object-group

outside_access_in list extended access allowed object-group TCPUDP any host Graphon 69.x.x.51 object-group

outside_access_in list extended access permit tcp any host 69.x.x.51 eq https

outside_access_in list extended access permit tcp any host 69.x.x.51 eq www

outside_access_in list extended access allowed object-group TCPUDP any host TS-777 69.x.x.50 object-group

outside_access_in list extended access permit tcp any host 69.x.x.54 eq https

access extensive list ip 172.16.0.0 outside_cryptomap_1 allow 255.255.0.0 192.168.50.0 255.255.255.0

access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.0.0 192.168.0.0 255.255.255.0

inside_nat0_outbound list of allowed ip extended access all 172.16.0.32 255.255.255.224

access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.0.0 192.168.50.0 255.255.255.0

access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.0.0 192.168.1.0 255.255.255.0

inside_access_in of access allowed any ip an extended list

Standard Split-Tunnel access list permit 172.16.0.0 255.255.0.0

access-list SHEEP extended ip 172.16.0.0 allow 255.255.0.0 192.168.0.0 255.255.255.0

access-list SHEEP extended ip 172.16.0.0 allow 255.255.0.0 192.168.50.0 255.255.255.0

access-list SHEEP extended ip 172.16.0.0 allow 255.255.0.0 192.168.1.0 255.255.255.0

access-list SHEEP extended ip 172.16.0.0 allow 255.255.0.0 172.16.0.0 255.255.0.0

access extensive list ip 172.16.0.0 outside_cryptomap allow 255.255.0.0 192.168.0.0 255.255.255.0

access extensive list ip 172.16.0.0 outside_cryptomap_2 allow 255.255.0.0 192.168.1.0 255.255.255.0

pager lines 24

Enable logging

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

MTU 1500 dmz

IP local pool VPN_Users 172.16.100.10 - 172.16.100.20 mask 255.255.255.0

IP local pool anypool 172.16.0.9 - 172.16.0.19 mask 255.255.0.0

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0 access-list SHEEP

NAT (inside) 1 0.0.0.0 0.0.0.0

public static 69.x.x.50 (Interior, exterior) 172.16.0.2 netmask 255.255.255.255

public static 69.x.x.51 (Interior, exterior) 172.16.1.2 netmask 255.255.255.255

public static 69.x.x.52 (Interior, exterior) 172.16.1.3 netmask 255.255.255.255

inside_access_in access to the interface inside group

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 69.x.x.49 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

dynamic-access-policy-registration DfltAccessPolicy

Enable http server

http 172.16.0.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

card crypto outside_map 1 match address outside_cryptomap

card crypto outside_map 1 set pfs

card crypto outside_map 1 set 208.x.x.162 counterpart

card crypto outside_map 1 set of transformation-ESP-3DES-SHA

card crypto outside_map 2 match address outside_cryptomap_1

card crypto outside_map 2 set pfs

card crypto outside_map 2 peers set 209.x.x.178

card crypto outside_map 2 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

card crypto outside_map 3 match address outside_cryptomap_2

card crypto outside_map 3 set pfs

card crypto outside_map 3 peers set 208.x.x.165

card crypto outside_map 3 game of transformation-ESP-3DES-SHA

outside_map interface card crypto outside

crypto ISAKMP allow outside

crypto ISAKMP policy 5

preshared authentication

3des encryption

sha hash

Group 2

life 86400

crypto ISAKMP policy 30

preshared authentication

3des encryption

sha hash

Group 1

life 86400

Telnet timeout 5

SSH timeout 5

Console timeout 0

dhcpd outside auto_config

!

dhcpd address 172.16.0.20 - 172.16.0.40 inside

dhcpd dns 172.16.0.2 69.x.x.6 interface inside

dhcpd allow inside

!

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

allow outside

SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image

enable SVC

tunnel-group-list activate

attributes of Group Policy DfltGrpPolicy

Server DNS 172.16.0.2 value

Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

Group Policy inside sales

Group sales-policy attributes

value of server DNS 172.16.1.2 172.16.0.2

VPN-tunnel-Protocol svc

Split-tunnel-policy tunnelspecified

Split-tunnel-network-list value split Tunnel

WebVPN

SVC mtu 1406

internal group anyconnect strategy

attributes of the strategy group anyconnect

VPN-tunnel-Protocol svc webvpn

WebVPN

list of URLS no

SVC request to enable default webvpn

username of graciela CdnZ0hm9o72q6Ddj encrypted password

graciela username attributes

VPN-group-policy DfltGrpPolicy

tunnel-group 208.x.x.165 type ipsec-l2l

208.x.x.165 group of tunnel ipsec-attributes

pre-shared-key *.

tunnel-group AnyConnect type remote access

tunnel-group AnyConnect General attributes

address anypool pool

strategy-group-by default anyconnect

tunnel-group AnyConnect webvpn-attributes

Group-alias anyconnect enable

allow group-url https://69.x.x.54/anyconnect

tunnel-group 208.x.x.162 type ipsec-l2l

208.x.x.162 tunnel ipsec-attributes group

pre-shared-key *.

tunnel-group 209.x.x.178 type ipsec-l2l

209.x.x.178 group of tunnel ipsec-attributes

pre-shared-key *.

!

Global class-card class

match default-inspection-traffic

!

!

World-Policy policy-map

Global category

inspect the icmp

!

service-policy-international policy global

context of prompt hostname

: end

Hello

You could start by adding the following configurations

permit same-security-traffic intra-interface

This will allow traffic to the VPN users access the interface ' outside ' of the SAA and to leave to the Internet using the same interface ' outside '. Without the above command, it is not possible.

Also, you need to add a NAT configuration for VPN Client users can use the Internet connection of the ASA

To do this, you can add this command

NAT (outside) 1 172.16.0.0 255.255.0.0

This will allow the PAT for the Pool of VPN dynamics.

Hope this helps

Don't forget to mark the reply as the answer if it answered your question.

Ask more if necessary

-Jouni

Tags: Cisco Security

Similar Questions

  • Cannot type 'functions' without client Anyconnect VPN setup

    Hi I am trying set Anyconnect VPN client based on Cisco documents below. There is a command like below. When I typed 'function', I can't enter. Can anyone give me some suggestions? Thank you.

    internal GroupPolicy1 group strategy
    attributes of Group Policy GroupPolicy1
    Protocol-tunnel-VPN IPSec l2tp ipsec webvpn
    WebVPN
      functions entry url file-access file-exploration of the mapi port forward files filter entry
    HTTP-proxy download automatic citrix

    http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

    ASA-recent versions, it is configured without the keyword "functions":

     asa(config-group-policy)# webvpn asa(config-group-webvpn)# ? Group-policy WebVPN commands: ... file-browsing Allow browsing for file servers and shares file-entry Allow user entry of file server names to access filter Configure the name of the webtype access-list ... port-forward Configure the name of the Port Forwarding applet and auto-download options ... url-entry Control the ability of the user to enter any HTTP/HTTPS URL url-list Configure a list of WebVPN servers/URLs

  • Can not type 'url-list' without client Anyconnect VPN setup

    Hi I am trying set Anyconnect VPN client based on Cisco documents below. There is a command like below. When I typed 'url-list', I can't enter.

    Here is example of Cisco:

    WebVPN
    allow outside
     list of URLS ServerList "WSHAWLAP" cifs://10.2.2.2 1
     list of URLS ServerList "FOCUS_SRV_1" https://10.2.2.3 2
     list of URLS ServerList "FOCUS_SRV_2" http://10.2.2.4 3

    Here's my ASA:

    VPNFW-70/PRI/Act(config-WebVPN) # url -?

    set up the mode commands/options:
    URL-block url-url-cache server

    My ASA has no choice of the list of URLs when you type '?

    Can anyone give me some suggestions? Thank you.

    http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

    Hello

    In the 7.x code all customizations without client was included in the running configuration.
    However, referring to this document from cisco:- http://goo.gl/XRkrcO, you can see that this command has been deprecated in 8.X ASA codes.

    The best way to configure the bookmarks will use the ASDM or create them on a server and then bring import them to ASA.

    Why we can not create bookmarks CLI?

    With the introduction of 8.x many more options have been added, allowing greater flexibility.  These new options would make the running configuration passes, so they were moved into separate xml files.  Indeed, it eliminated the ability to configure a list of bookmark via the CLI.

    For more information on this discussion, please refer to this thread: -.
    https://supportforums.Cisco.com/discussion/11010546/how-do-i-create-URL-bookmark-WebVPN-Portal-CLI

    Kind regards
    Dinesh Moudgil

    PS Please rate helpful messages.

  • Y at - it a client AnyConnect VPN for Windows Mobile 6.5

    Hi people,

    I have a client using PDA based on Windows Mobile 6.5 and Windows CE. Is there a version of the AnyConnect VPN client for these devicese and in this case, where they are available for download?

    Best regards

    Peter

    Hi Peter,.

    There isn't a client available for mobile platforms. However, perhaps, they may work with SSL VPN on SAA... But however the browsers on these platforms are obsolete... (like BONE :-))

    Kind regards

    Sander

  • ASA5500 - anyconnect VPN not access Web server in DMZ

    I am at a loss. I enclose my config. I can access DMZ from within the network, but cannot access DMZ of VPN.

    Any help would be great.

    Rich

    Also have question access to management 0/0 (192.168.1.1) of the Interior of the E0/1 (192.168.2.0) network

    @richyanni1 ,

    For your VPN - DMZ problem, the following is the most likely cause of your problem:

    nat (inside,dmz) source static obj-dmz obj-dmz destination static obj-vpnpool obj-vpnpool
    You should have in place:
    nat (outside,dmz) source static obj-vpnpool obj-vpnpool static obj-dmz obj-dmz
    That's because VPN clients appear to come from the outside (to some purposes NAT) and the need to be exempt from NAT to access the resources of the DMZ. Management problems, the problem is asymmetric routing. When your packages arrive on the management UI, the ASA will try to send back traffic (starting with the 3-way TCP transfer protocol which will fail) through the inside interface but that won't work because ASA helped him, the source of the acknowledgement of receipt would SAA within the interface IP address, not the address of interface management in which the SYN sent. That's why most of the people have not historically used the management interface to ASA unless you have a real out-of-band network for management. Cisco recently introduced a separate fair management routing table, but you need to switch to 9.5 (1) or later to take advantage of that.
  • Client AnyConnect vpn for linux

    Hello

    I try to use the anyconnect for linux client vpn.

    My connection is through a proxy with NTLM authentication.

    Is it possible to do this?

    I have found no information on.

    Thanks in advance

    Silk,

    Not-so-good news:

    http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsg77160

    Unfortuately the business unit has never sees fit to include this feature.

    But you can conntact consider you the team to discuss the issue.

    Marcin

  • VPN Internet access ASA5520

    Now my VPN works fine, it connects the user to the network, but it prevents them from using the internet.

    How can I set ASA5520 to force users to use their staff internet vs. Internet companies through the VPN tunnel?

    I agree with Jay's advice on the implications of the split tunneling and the potential threat to your network.

    With the ASA and 7 code version you aren't necessarily need to proxy server. In PIX code pre 7 versions the PIX would not transmit on the same interface, happened on the traffic. With version 7 (also good for PIX and ASA) code, it is possible to configure it so that it will transmit to the interface on which it was received. So even if a proxy server can be a good thing he is most needed.

    HTH

    Rick

  • Client AnyConnect VPN 2.3

    When I run the application, how do I do not see other menus to drop as documented?

    Install it wrong?  I do not see options for:

    Group

    Username

    Password

    Am I suppose to not see these yet?

    Thank you

    Hi, you're not to see those again until you connect to the vpn server, launch the anyconnect cleint to see a ' connect to: "field to enter the IP address of the VPN server, once this connection is established the other fields drop-down list appears as what you ask for."

    Concerning

  • VPN Client AnyConnect 5 migration

    Dear community

    We are migrating the old Cisco VPN Client 5-Cisco AnyConnect.

    I have a couple of ASA-5510 9.1 (1) running the code with a license Base and in the current configuration, all remote users is in the VPN using standard methods of IKE/IPSec with their laptops (no split tunneling, nothing fancy). The VPN Client currently has a profile that is imported into each user's computer and has a pre-shared key that is stored, the solution works very well.

    Management has decided to go for the more AnyConnect version, rather than Apex which I believe meets all our requirements (preview here: http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect40/feature/guide/anyconnect40features.html).

    I have three questions about the migration of Client AnyConnect VPN:

    (1) currently my ASA shows that AnyConnect is disabled (see attached screenshot to see the version). Can I upgrade the license on my ASA? If what comes with AnyConnect or do I need to order it separately?

    (2) is it possible to use the AnyConnect VPN Client VPN profile or should I create a new one?

    (3) can someone direct me to a guide for remote access VPN configuration using the rather than the old VPN Client AnyConnect client? Are there any caveats / pitfalls, I should be aware of?

    Thank you very much!

    Best regards
    Martin

    1 order the AnyConnect license you will get a PAK that you can redeem on the auto-serivce portal to get an activation key for your ASA. (You will need the serial number ASA as well.) This will allow you to "Essentials" AnyConnect (former name for more have together (which now includes Mobile), more or less) and allow you to run the command "anyconnect essentials".

    2. the old style IPsec profiles channel not again SSL VPN ones.

    3. There are many many of them out there. If you are new to it, you can find Pete Long message on the blog useful How - to's:

    http://www.petenetlive.com/kb/article/0000069.htm

  • AnyConnect VPN application

    Hi all

    There is a single query on the anyconnect ASA 5510 deployment. We have the ASA 5510 with security more lic. and for lack of run (client) anyconnect VPN for concurrent users. It requires a separate licence for Anyconnect (client).

    5510 a security more lic.

    Firewall settings:

    AnyConnect Essentials: disabled

    AnyConnect Premium: 2

    Max VPN session: 250

    If I run anyconnect VPN it takes max 2 session. But need more sessions.

    Thank you

    Vishaw

    If you just want to use computers to connect to anyconnect using the AnyConnect client and not the clientless SSL, you only need to purchase the license AnyConnect Essentials for the amount of connection you need (supports up to 250).  If you need SSL clientless also, then you must purchase the Premium license.  If you also require that mobile phones, tabs, etc. need to connect to the AnyConnect client, then you need client AnyConnect mobility.

    The following link gives you an overview of the licnenses for the 5510 and other models ASA.

    http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa84/configuration/guide/asa_84_cli_config/intro_license.html#wp2142486

    In addition, here Pete does a good job of explaining AnyConnect licenses.

    http://www.petenetlive.com/kb/article/0000628.htm

    --

    Please do not forget to select a correct answer and rate useful posts

  • AnyConnect VPN session disconnect and reconnect

    I have a firewall cisco ASA 5525-X set up to accept the AnyConnect VPN client (IKEv2) connection.

    AnyConnect VPN client can successfully connect.

    During the 1st 10 minutes after logging in, will the client Anyconnect VPN lost VPN connection for a few seconds (ranging from 3 seconds to 10 seconds), then it automatically reconnect back. After that, no more lost connection times.

    The lost connection happened at all multiple. So far, all at least 4 show the same problem.

    It does not affect the operation of the network, but it gives an unpleasant impression for users.

    I tried to surveillance of the ASDM firewall logs, no newspaper of no errors.

    I use Wireshark to capture traffic on the client side, also no errors detected.

    Can idea how I can continue to troubleshoot this problem?

    Hi Limlayhin,

    You can go ahead and capture logs of dart. You can download the Pack of dart for the anyconnect version you use and that you run after you experience this problem. Please make sure that everything you clear observer logs event before you launch you the Anyconnect client.

    To clear the observer event logs, follow these steps:

    1. start > run > Eventvwr

    2. it will then open Event Viewer Window

    3 maximize the application logs and services and that you will find an option "Cisco Anyconnect Secure Mobility Client"

    4. right click on the Cisco Anyconnect Secure Mobility Client and select clear logs. Select clear after that.

    Once you are done with this, launch the anyconnect connection and allow the problem to happen. Once the problem occurs, unplug the anyconnect client and run newspapers dart. It will create a Zip file on your desktop (by default) and you can go through the logs of connection Anyconnect to look for the root cause.

    Let me know if it helps.

    Vishnu

  • Client VPN prevents internet access from other computers on the network

    Hello.

    I run Client ver 4.6.03.0021 from an office on a network of 11 computers via a hub 16-port. Internet access is through an ICS gateway to the cable modem. Once I changed the modem cable to test a backup and then switched back to the original modem. After this, only computers that have the VPN Client (running or not) could access the internet. Computers that have no customer VPN can access only certain sites. Commonly viewed sites would say "site found. Waiting for answer", but the answer would never come and IE 6.1 cling. When I would try ping sites, it would fail. However, some sites such as Google.com would work.

    On one of the computers, on a whim of head, I installed the VPN Client but have not set up a connection. Now, this computer will connect to any website I want.

    Is there a fix easier to get access to other computers on the network without installing the VPN Client on each of them?

    Thank you

    H. Adams

    Hello

    Looks like you are running in MTU problem. The reason I say it is, automatically reduces the MTU value to 1300 VPN client during the installation for the whole system. That is to say all the client computer installed VPN that have MTU from 1300.

    Try to cut down the MTU of other systems that have no VPN client installed to 1300. If it's a Windows system, you can use Dr. TCP (free).

    Vikas

  • No Internet access after the connection of the cisco vpn client

    Hi Experts,

    Please check below config.the problem is vpn is connected but no internet access

    on the computer after the vpn connection

    ASA Version 8.0 (2)
    !
    ciscoasa hostname
    activate 8Ry2YjIyt7RRXU24 encrypted password
    names of
    !
    interface Ethernet0/0
    nameif outside
    security-level 0
    IP 192.168.10.10 255.255.255.0
    !
    interface Ethernet0/1
    nameif inside
    security-level 100
    IP 192.168.14.12 255.255.255.0
    !
    interface Ethernet0/2
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface Ethernet0/3
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface Management0/0
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    2KFQnbNIdI.2KYOU encrypted passwd
    passive FTP mode
    standard access list dubai_splitTunnelAcl allow 192.168.14.0 255.255.255.0
    INSIDE_nat0_outbound list of allowed ip extended access all 192.168.14.240 255.255.2
    55.240
    pager lines 24
    Within 1500 MTU
    Outside 1500 MTU
    IP local pool testpool 192.168.14.240 - 192.168.14.250
    no failover
    ICMP unreachable rate-limit 1 burst-size 1
    don't allow no asdm history
    ARP timeout 14400
    Global 1 interface (outside)
    NAT (inside) 0-list of access INSIDE_nat0_outbound
    NAT (inside) 1 0.0.0.0 0.0.0.0
    Route outside 0.0.0.0 0.0.0.0 192.168.10.12 1
    Timeout xlate 03:00
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout, uauth 0:05:00 absolute
    dynamic-access-policy-registration DfltAccessPolicy
    Enable http server
    http 192.168.14.0 255.255.255.0 inside
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp authentication linkup, linkdown cold start
    Crypto ipsec transform-set esp-3des esp-md5-hmac setFirstSet
    Crypto-map dynamic dyn1 1 set transform-set setFirstSet
    Crypto-map dynamic dyn1 1jeu reverse-road
    dynamic mymap 1 dyn1 ipsec-isakmp crypto map
    mymap outside crypto map interface
    crypto ISAKMP allow outside
    crypto ISAKMP policy 1
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 43200
    crypto ISAKMP policy 65535
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    Telnet timeout 5
    SSH timeout 5
    Console timeout 0
    a basic threat threat detection
    Statistics-list of access threat detection
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the netbios
    inspect the rsh
    inspect the rtsp
    inspect the skinny
    inspect esmtp
    inspect sqlnet
    inspect sunrpc
    inspect the tftp
    inspect the sip
    inspect xdmcp
    !
    global service-policy global_policy
    password encrypted user testuser IqY6lTColo8VIF24 name
    username password khans X5bLOVudYKsK1JS / encrypted privilege 15
    tunnel-group mphone type remote access
    tunnel-group mphone General attributes
    address testpool pool
    tunnel-group ipsec-attributes mphone
    pre-shared-key *.
    context of prompt hostname
    Cryptochecksum:059363cdf78583da4e3324e8dfcefbf0
    : end
    ciscoasa #.

    Hello

    Large.  Try adding the below to make it work

    vpn-sheep access list extended permits all ip 192.168.15.0 255.255.255.0

    NAT (inside) 0-list of access vpn-sheep

    Harish

  • AnyConnect VPN client can be used for IPSec remote access VPN connection?

    I think I heard it somewhere that AnyConnect VPN can be used for connections SSLvpn IPSec VPN. Is this possible? Thank you!

    No, the Anyconnect software cannot be used to establish the framework for a VPN IPSEC IKE.

  • Internet access AnyConnect SSL - U Turn

    Hi team,

    I'm not great when it comes to VPN and SSL on the SAA, so I'm looking for assistance please. At the moment we have anyconnect deployed for laptops. The idea is that they SSL VPN to ASA and then have access to the resources of the company as well as internet. But we want internet access through the ASA, which is the bit that has stopped working. Maybe a change in configuration or something, don't know yet. I checked the NAT and the rules, the habit, and he seems to agree. Apparently, some users are working, but some are not. I have a laptop with the client and it does not work. Config is attached.

    Help with configuring and troubleshooting would be much appreciated.

    Bilal

    Hello Bilal,

    There seems to be a cause of problem, I'm not able to see your message when I login, but he returned without connection.

    Please add this command and let me know how it rates: -.

    NAT (DMZ-6) 1 172.26.255.0 255.255.255.0

    Kind regards
    Dinesh Moudgil

    PS Please rate helpful messages.

Maybe you are looking for

  • Unable to download iOS 9.3.4 via iTunes

    I am new to this forum so Hello to everyone. I tried to download the latest version of iOS (9.3.4) for my iPad 2 Air via iTunes without success, every attempt ending with "the software for the iPad has been altered during the download. Where download

  • factor authentication code 2 sent to Apple Watch

    Hello. I recently implemented authentication 2F for my iTunes ACCT. Is there a way to get the code on my watch. Thank you for any response. C

  • Expand 32 table of entry to 1024 by interpolation

  • Problems connecting to the local network with NAS

    So we have a private network to work. On this network we have implemented a Synology NAS. We are constantly backup of files, files, adding files, etc. updated excel... There is a lot of traffic on this subject. Recently it was kickoff of people with

  • Endless reboot and commissioning.

    Looked for support but nothing has worked yet. A tool of false malicous softwear installed itself on my windows xp. I couldn't get rid of the program by the usual means. I turned off my pc and went to bed. Big mistake. Now, I'm in this interminable r