no connection is available... all wireless network disappeared... what I do

Similar Questions

• Photosmart HP 7520: All wireless network devices will lose connectivity after printing

  Dear all, 
  
      I have a problem with my HP Photosmart 7520 printer where all wireless network devices will lose connectivity after a printer has been sent to the printer.
  
  * Summary
  Wireless network unusable after sending one print to HP printer
  No device ( computers nor smartphones ) can use the Internet nor access internal networks ( 192.168.0/24)
  
  * Details
  Turn HP printer on.  ( wireless direct is off - never turned on )
  HP printer connects to working wireless network.
  Other devices ( phone/computers ) already connected and working.
  From any device, send a document to the printer.
  Printer prints document successfully.
  Immediately after printer has printed all devices cannot access internet IP range ( including HP printer ) nor Internet nor router ( 198.168.0.1 ).
  
  * Reproducibility
  Always
  
  * Work around
  Disconnect all devices from the network.
  Power off printer.
  Reboot Internet router.
  
  * Attempted solutions
  Removed wireless configuration.
  Factory reset.
  Added wireless configuration back.
  Powered on and off printer.
  
  * Printing tested with
  Tested with Macbook10.11/Windows 8/Ubuntu 12/Android 4.4.2
  
  * Not tested
  Ethernet cable directly connected to router.
  
  * Internet Router
  Netgear CG 3700
  

  Number of brand and model of the router?

  These settings are to set up your printer wireless (or wired):

  • Stay connected to your router
  • Trouble printer status 'offline '.
  • Wake mode 'sleep'
  • All wireless devices stay better connected

  While the DHCP is convenient, devices like printers (wired and wireless) should always be assigned a (fixed) IP address manually to avoid conflicts on your wireless network and must be outside the range of the router DHCP.  After the adjustment of the static IP address the computer must be updated to show a Standard TCP/IP port with the IP address of printers under printer properties/Ports.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here and here and still more here.  Video here explains the problem and how to solve the problem. <--> So watch this!
  2. Or check in the printer "Auto Off/sleep/Energy Saving Mode" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check your printer properties.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. Make sure that the printer is connected directly to a socket wall and not to a UPS, power strip or a lightning arrestor. This will cause the printer to drop offline connection and disconnection (checked yes!).

  Additional measures to take if you continue to have the problem (if they are posted)...

• Recently installed vista update. I can no longer connect to my home wireless network.

  Recently installed vista update.  I can no longer connect to my home wireless network.  I get a message that says 'wireless link failed because windows did not receive response from the access point or wireless router.  I troubleshott he said of computing could be from low signal strength and yet it shows the strength of 100%.  Anyone have any ideas?

  Hello

  Check the firewall it is maybe it has been reset.

  In general.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Connecting to the wrong wireless network.

  Nope.  Tried to make this process a few times just to make sure that I was just doing and still it connects to the wrong network.  Something else I could try?

  I'm in the boat the same, did you ever get a resolution on this?

  Separated from the<>https://answers.microsoft.com/en-us/windows/forum/windows_7-networking/connecting-to-the-wrong-wireless-network/633fcfd6-7bdd-4369-b66f-94611c5df76e >

  Here are some solutions to try if you can't connect to Wi - Fi. Follow the below mentioned steps to solve the problem:
  1 remove the network and let Windows re - find. Then enter the password again.
  http://Windows.Microsoft.com/en-in/Windows-8/get-online-tutorial
  2. change the TCP/IP settings, if the IP address is set to manual
  http://Windows.Microsoft.com/en-in/Windows/change-TCP-IP-settings#1TC=Windows-7
  3. If none of the above steps work, follow the link to solve the problem below:
  http://Windows.Microsoft.com/en-in/Windows/cant-connect-to-network#1TC=Windows-8

• Said connections wireless network connection are available, but the networks to connect to are no longer visible in the connection

  I got a new laptop from work and have connected a couple of times on our network.  Now, he does not connect through the wireless network connection.  He said that the connections are available, but there is no connection available more in the list.  If you have to manage wireless networks, it is in the list... but you can not log in via this page.  Any help would be grateful.

  Thank you!

  Hello

  1. what operating system you are using?

  2. how many computers is connected to the network?

  3 - is a domain network?

  4. What is the exact error code or error message you received?

  5 have have there been recent changes made on the computer before the show?

  Follow the steps mentioned below and check if that helps.

  Method 1: Troubleshooting run Network.

   

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  Method 2: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If you cannot connect to a network, it could be a problem with your network adapter. You can try to use the network adapter troubleshooting utility to automatically find and fix some common problems.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 3: Disable the security software and check.

   

  You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  For more information, please see the following links:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope that helps!

• Wireless networks disappear minutes after startup

  I start my desktop PC (Windows 7) and everything works fine. I am connected to my wireless router and have access to the internet.

  Then a problem occurs, sometimes only 2 or 3 minutes later, sometimes around 5 or 6 minutes later.
  The computer loses internet access, but remains connected to the network. After a few seconds, the internet is back.
  After a few times, the computer finally loses the connection to the network, and then the network (as well as other networks that were in the range) is no longer there.
  I am currently link this on my laptop which is right next to my office. My laptop is connected to the router wireless (and internet) without any problem.
  I've been struggling with this for a while now and there are only a few hours, I deleted Norton anti-virus with the Norton Removal Tool. No change.
  Map of TP-Link in the problematic PC wireless network is only about 2 years old. I think my next step is to buy a new card netword, thoughts?
  EDIT - I forgot to mention. I uninstalled and reinstalled the NIC several times. No driver updates available.
  I just thought an idea. Before buying a new card, I'll see if I can install this on my brother's PC. So I'll see what happens.

  Hi Mike,.

  You are facing problems with an internet connection in Windows 7.

  Were there any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Cannot connect Tecra 9000 to wireless network

  Hello

  I am trying to connect my laptop Toshiba T9000 to my BT home Hub 2.0 Wireless v but a little difficulty.
  The laptop recognizes the hub, but every time I click on connect, I get the same message.

  ""Windows cannot connect to the selected network. " The network can be is no longer in range. Please refresh the list of available networks and try to connect again"

  I went through a few troubleshooting steps to resolve this problem, but always without success.
  Can I update the driver? My inclination is that this may have something to do with the laptop is not able to support WPA?

  I am not very computer but if anyone has any additional input to help me with this question then I would be very happy.

  Kind regards
  Answer by quoting

  > Can I update the driver? My inclination is that this may have something to do with the laptop is not able to support WPA?
  This may be possible

  The point is that this laptop is an oldie and the wireless network adapter appears to be old too.
  I ve no idea what WLan card you have, but you could try to connect to the WLan without use of encryption settings. Disable encryption on the router Wlan and test connectivity again. of course, this must be done only for testing purposes
  The wireless network must be always secure

  The alternative could be the use of external USB WLAN, it would be the easiest and fastest way for that to be resolved

• Satellite Pro 6100: unable to connect to internet via wireless network

  Have had some problems with the audio device Yamaha for another thread, which now seems to be resolved. Thank you!

  However, do not know why, but now unable to connect to the internet via a wireless network, although the router works well as another computer in the House is connected wireless.

  When you check the available wireless networks it comes up with "no wireless networks were found in range, make sure that your computer's wireless switch is on.
  Where to check it, can anyone help?

  Thank you

  On the left side, there is WLAN switch. Make sure that the switch is in on IT. After doing this using FN + F8 key combination and activate WLAN device.

  After having done that, you should be able to see the WLAN networks available in your area.

• My computer cannot connect to a WPA2 wireless network.

  I'm on a Dell inspiron 6000 with Windows XP and service pack 3. I recently used a WPA wireless connection, not all of a sudden trying to use this new network, I can't connect.  I type the key network and nothing.

  What I can do and if anyone has any ideas, I'd appreciate it greatly,
  Thank you

  Hello

  I suggest you to download this utility from the link and run the same:

  Troubleshooting Microsoft Windows XP-based wireless networks in small businesses or individuals: http://www.microsoft.com/download/en/details.aspx?id=10634

  You can also follow the steps from the link: how to fix wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702

  You can also view: problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

• DeskJet 3055 has J11n: connect Deskjet 3055a J11n wireless network without PIN or WPSA and with Mac Mavericks

  Hello

  I run a Mac with Yosemite and would like to add the printer Hp Deskjet 3055a J11n for the wireless network.

  My router doesn't have any a WPSA button and not a PIN code.

  Before, when I used Mac OS 10.6, I could run the features of the CD that came with the Hp Printer.

  When I try to open the Setup from the CD on Yosemite, he says 'cannot open only on Mac 10.6.

  How can I connect the printer to my wireless network?

  Thank you!!

  Marjolein

  Hi @MarjoleinPeters,

  A driver full features for Yosemite is not available for your printer, or from the CD supplied with your printer from the HP website.  This document applies to the HP printers supported in versions of Mac OS X 10.7 (Lion), 10.8 (Mountain Lion), 10.6 (Snow Leopard), 10.9 (Mavericks), and 10.10 (Yosemite) who have only drivers available via Apple Software Update.

  I can help you put the printer on your network wireless software. I use this method for iPads, iPhones and other devices that have no software.

  1. Restore default network settings on the printer by pressing the wireless button, by going to settings and then restore the default settings. The wireless button should then start flashing, this means that it is now in auto wireless mode.
  2. To connect to the network that broadcasts the printer. It is usually HP-setup-3050 has and then a part of the MAC address. Always wireless light will blink on the printer at this stage, which is normal since it is not a real ad-hoc connection.
  3. Load up the built-in webserver (EWS) in the browser of your mobile device. For automatic wireless default IP address is 192.168.223.1.
  4. Go to the tab network along the top of the SAP.
  5. Click Setup Wizard along on the left hand side to begin to set up the printer wireless.

  

  You have now completed the configuration of wireless network, follow the next 3 steps to start printing.

  1. Blue wireless light will be solid, put the Mac on your network.
  2. Add the printer in system preferences.
  3. Print

  Please let me know if that solves the problem. I look forward to hear from you.

• I can not connect to or finding wireless networks

  I really appreciate any help you can give me for this problem.
  While I tried to include all the relevant details, please let me know if you need more.
  I have these specifications or running programs
  • Sony Vaio VGN-FE865E
  • MS Windows Vista Home Premium 32 bit SP2
  • A/b/g/n wireless D-Link router
  • Intel (R) PR0/Wireless 3945ABG Network Connection, version 10.6.0.29
  • Spybot S & D
  • AVG Free Antivirus
  Recently, I removed these products with REVO Uninstaller:
  • All click DVD products
  • Windows Media Player

  I will have these disorders:

  • When I "manage network connections", none are present now while 10 + networks should be there.
  • When I "diagnose and repair" the wireless network it says: "this computer is set to connect manually to"Netgear F8"" is not a router I know or preferred my network
  • When I press the update under "connect to a network", the thing that looks like a trash icon, but turn it show it is refreshing, not is nothing more

  I did:

  • under the command prompt, I did a sfc/scannow (full audit; Protection of resources found no breach of integrity ;)
  • I tried to diagnose the connection, it keeps telling me to change the network settings
  • Wireless adapter found under "Device Manager": device is turned on, works fine, up-to-date and has no resource conflicts
  • I have reset, turned on and off and enabled the network card

  PS. connection to the preferred network via LAN internet gives computer problem

  OK, so it has been set to 0 (the DHCPNode) and I changed it.

  What strikes me as odd, however, is that earlier tonight the problem cleared up. I don't know what has changed.

  I noticed it happened because I was playing a game online (with LAN) and jumped rope, but I was able to continue playing.  During the inspection of more I noticed that all the saved networks were back and I connect to my local network.

  I then remove the Netgear network recorded, that I didn't.

  Again, thank you for your time and help,

  Sincerely,

  Lance

• Cannot connect second laptop to wireless network

  . Laptop my son (Vista) (Internet Explorer8) "cannot display the web page. Said diagnosis connect a cable to the NIC 'Connection to the Local network' - its supposed to be wireless and my (1 laptop Windows 7) is online. It was OK, but I changed to a new Talktalk wireless router. The computer Vista laptop says it's connected locally. Help please

  Hello

  ·          You have the updated drivers for the network card?

  ·          Have you been able to connect to the network after replacing the router?

  If not, you can check the settings of the router and if your computer has the correct router configuration.

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/view-and-connect-to-available-wireless-networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  You can try the suggestions in the given below link and check if this is useful.

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Hope that information was useful

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to ground or wireless network

  I can't connect to my land or wireless network.  I tried to connect through my laptop to work and land / wireless worked as expected (e.g. problem is not with the router).  Previously, I was able to connect to the network via my computer at home.  Some information:

  1. I get the following message when I consult my network connections:

  "Connection status: unknown.

  The dependency service or group was able to start. »

  2 Windows cannot find any wireless networks in range.

  3. I tried to use Windows Network Diagnostics and the message I got was "The Windows Wireless Service is not running on this computer."  I tried to start the service, but couldn't.

  I would appreciate any you can give troubleshooting tips!  Thank you.

  Hi Kelly1986,

  1. what happens when you try to connect by using wired connection?
  2. do you have security software installed on the computer?
  3. did you of recent changes on the computer?
  4. What is the error message when the service started?

  First of all, I would say that check you what happens when you connect using the wired connection.

  Check also in mode safe mode with Networking if you are able to connect to internet using wired connection.

  Steps to start in safe mode with networking
  1 restart your computer if it is running.
  2. press the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Startup Options , you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. Select Safe Mode with network and pressenter.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Disable the security software on the computer and try to start the service and check.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  If you still cannot start the try running SFC scan service that would have a search system files corrupted on the computer and replace them.

  For more information please visit the link below.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Go back with the results!

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Win 7 does not recognize that I am connected to my home wireless network.

  Recently, I upgraded my desktop and my laptop at home to Win 7. I'm trying to set up a home network, but on my laptop, I can't change my home network location. Even though my laptop is connected to the internet via my wireless router, Windows don't think that I'm connected to a network. When I click on "connect to a network", it shows that I am connected to my wireless router. When I try to set up a home network on the laptop, it tells me I need to change the network location of the Public at home, but since he did not think that I am connected, it will not allow to do me this.  I searched the internet and worked through it for hours, but can't seem to find a solution to this problem. Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I had this same problem.  I have a home group on my desktop running win 7 64 bit.  My laptop (win 7 64 bit) could not connect because the internet connection was showing pubic hair and I couldn't change it.  Here's what I did.  I deleted all my networks and groups off the laptop computer.  I restarted my laptop.  On my desktop, I went into Control Panel, home group and consulted my password.  I also need my wep key of wireless network.

  To better understand, my wireless network name is cleopatraiz

  On my laptop, I went into the wireless network connections through the status bar at the bottom right which displays all networks wireless scope.  I clicked on my wireless (cleopatraiz) and it prompted for the wep key.  I entered that and then I went into newwork & Sharing Center, was now showing my active network as cleopatriz, I clicked on choose home group and sharing options and joined using my password of the Group House of desktop computers.  It worked.

• Satellite A300 - unable to connect to a local wireless network

  Hello

  I have a question: bought a laptop two days ago, the wireless LAN doesn't work. It can detect the network, accepts the network key, he just used to connect.

  Help, please.

  Hello!

  Have you checked the TCP/IP of the WLAN card settings?
  I put t know the network configuration of the router, but if you are using DHCP you must use this mode or you set a static IP address.
  Check it!

  Also, check if your wireless network card is recognized correctly in Device Manager and try to reset your router. This means that you must remove the router AC adapter and wait 5 minutes. Then plug the AC/DC adapter again.
  Sometimes a firmware update might be useful too.

  Good bye