No connectivity after installing Dell 1702 Driver for Wireless Adapter - of the suggestions?

Similar Questions

• After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  If you see the lock of Activation screen after update your iOS device, you want to try the following:

  -Restart your iOS device and try to connect again.

  -Visit appleid.apple.com and log in to ensure that your password is correct.  If you change something here, only to change your password.  Try to connect again on the iPhone.

  -Connect on iTunes on a computer and put your Apple ID and password when it prompts you (as it did on your iOS device).

  -ICloud.com check in the settings.  If you see your iOS device listed, remove account (do not erase or hit lost mode). Restart your device and try to reconfigure.

  -These measures should solve most of the problems.  For someone else, you will need to contact Apple (1-800-MY-APPLE or getsupport.apple.com).

  I hope that helps!

• I can't install a printer driver for my epsom SX425W

  someone help, I can not install a printer driver for my sx425w on my Lenova g560,.

  Hi Brian,.

  1. what happens when you try to install?
  2. do you get an error message?
  3. are you able to install any other programs?
  4. you try to install Epson printer CD or downloaded file?
  5. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Download the drivers from the following link:
  http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/support/3842

  Post us the results once you try the steps above.

• I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  Also, where can I find a list of compatible printers?

  I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  Also, where can I find a list of compatible printers?

  Hello

  You can use the Windows 8 Compatibility Center to find out if a device is compatible.

  Windows Compatibility Center: find updates, drivers, & downloads for Windows 8, Windows RT:
  http://www.Microsoft.com/en-us/Windows/compatibility/WinRT/CompatCenter/home

  FAQ - Windows Compatibility Center:

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/FAQ

  Concerning

• driver for bluetooth adapter soopa for helmet conect energy BT5

  I need driver for bluetooth adapter soopa for helmet conect energy BT5 for laptop HP Pavilion dv 6700 are.

  Please give me the link to obtein the pilot. Thank you very much
  Mail to; E-mail address is removed from the privacy *.

  Hi Carlos,

  According to the description, I understand that you want to install the Bluetooth drivers for headphones on your Windows 7 machine. I will certainly help you get this fixed number.

  I suggest you try to search for the drivers on the link below:

  https://www.energysistem.com/en/support?F=epgjfcacdeii&A=mpokoebncenp

  If this does not help, then may contact the manufacturer of the device for drivers appropriate according to your specifications.

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• After installing iOS 9.3.3 two iphones on the same apple ID are evidence of the other device call log.

  I use two iphones on the same apple ID. After installing ios 9.3.3 two iphones show the other call log also. In my view, that is a bug in ios9.3.3, because this problem started after the new ios.

  No this is by design, and it was not introduced with 9.3.3 much earlier

• Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own.

  Original title: "sleep" mode

  Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own

  Hello

  See if this information helps you, Vista and 7 work the same:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• Problems opening Captivate 7 for Mac after installing new hard drive

  Hello!

  My HDD recently crashed and I need to install a new hard drive (OS x El Capitan, version 10.11.13) on my mac. They re-installed Adobe Captivate (I use Adobe Captivate 7 for Mac), but now the software and files that I created using the software will not open. Initially, I received an error message stating that I had to install a new version of Java, but even after I did it, it will still not open. I click on the link in the finder and it bounces on the taskbar at the bottom for one second, then disappears. I tried to restart the computer, but it does not help.

  Can anyone help? I need it immediately for work!

  Thank you, Ashley

  I suspect that the reason is the operating system. Even the Captivate 8 was not compatible with El Capitan, I doubt that is the case with CP7. Only CP9 is compatible with El Capitan.

• 5.1 ESXi does not connect after installing - R720 Dell

  I installed ESXi 5.1 update 1 on a Dell R720 server. The installation was made using ISO provided custom in the Dell site.

  After installation I can't connect or ping to the machine.

  After SSH-ing to the host via the console I could see that the host can ping to its own IP address, but not of its front door.

  Is this a problem with the network Dell drivers?

  Information: There are 4 network cards. All are Gigabit Ethernet of Broadcom Corporation NetXtreme BCM5720 cards.

  esxcfg-NICS - l gave me the output below:

  

  Please help me with this.

  Hello

  You should check the configuration of your network management. If the IP, subnet mask, gateway, DNS are correctly configured and if it it set to vmnic3, as it is the only NIC you connected.

  If everything is correct, I would check the physical switch of the server config is connected to. Maybe the port is blocked or a bad local VIRTUAL network is configured.

  Tim

• No internet connection after installing the update of security for Windows Vista

  Security updates for Windows Vista released October 13, 2009 and November 10, 2009 still an Internet connection limited Connectivity/No. Did not help uninstall updates. To do the system restore to solve the problem. Why is this?

  drusecord,
  First thing is to update your network drivers for your system.  Then see if after the update of safety, you have a problem.  If you do, I would do the following:

  Disk error checking

  System File Checker

  Then if there are updates that you already have, but are always available to consult this information:

  Troubleshooting Windows Update: offered on several occasions to update

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• L830 satellite - Bluetooth cannot connect after installing Win 7

  I reinstall (Windows 7 Home Premium) on my laptop PSK84V-02400UAR Toshiba Satellite L830, and install all the drivers, but after you install all the drivers, I can't connect any Bluetooth device to this tour...

  When I search using the Bluetooth window it shows in the search window and after a while ' * could not detect the remote device * ' *... Kindly help... awaitng your valuable response.

  Can you please post exactly details how you installed the software and drivers Bluetooth?
  I think that you have made some mistakes there

  Your laptop supports the Atheros WLan card. Right?
  I think that this Atheros WLan card compatible with BT as well. This means that you need to install a special driver that allows to share WLan and BT in a single module.

  This driver calls filter for Atheros Bluetooth driver package.
  Therefore, install the driver Atheros Wlan, Atheros Bluetooth driver filter and battery Toshiba BT package.

  Then BT must be installed correctly and you should be able to activate it in order to start the pairing process.

• No network after installed security essentials driver

  After the installation of microsoft security essentials today, none of my network/communication drivers are installed... code 39 error in the system information window... running XP home ed SP3 build 2600

  Hi jman_67,

  Try these steps and check the result.
  Step 1: Uninstall the network adapter driver
  a. Click Start, click Run, type devmgmt.msc, and then click ok.
  b. in the list of objects, expand network adapters.
  c. right-click on the sub element and click on uninstall.
  d. restart the computer and check if the driver is installed automatically.

  Step 2: Install the network adapter driver
  a. Please visit the website of the device manufacturer or the manufacturer of the system on the other computer.
  b. download the right driver for your windows and save it on the flash drive.
  c. connect the flash drive to the computer problem and open the driver file, and then install it.
  d. restart the computer and check the connectivity.

  Step 3: If the problem persists, restore the computer
  see How to restore Windows XP to a previous state .

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot connect after install

  I just bought a new SSD with the intention of doing a fresh install of Windows on it. I downloaded Windows 8.1 installation directly from Microsoft Media on a USB key. I went through the installation, and it seemed to work perfectly well. However, when I started to install programs, I am essentially impossible to restart the computer. When I do, it attempts to load the login screen, but it is completely empty. I tried to reinstall Windows, and I am able to restart perfectly fine right after it loads everything first... but every time I try to install anything (Windows, Chrome, graphics drivers updates, printing software, etc.) he comes back to the same problem when I restart... screen empty, unable to do anything, much less actually connect. It is the first time that has happened for reinstalling Windows and I am quite lost.

  Hello

  Thanks for posting your query in Microsoft Community.

  I can understand the feeling of not being able to see the machine how it should work and I'll be happy to answer your query. Let me ask you;

  1. What is the brand and model of the computer?
  2. How did you create installation media for Windows 8 (which is the link/URL)?
  3. When you say new facility, do you mean clean install?
  4. Which operating system was installed before Windows 8?

  I suggest you to follow the steps below and check.

  Step 1: Please refer to the following and create the installation media for Windows 8.

  Create an installation media (DVD/USB) for Windows 8

  Note: You should have the product key for Windows 8 to create installation media.

  Step 2: Start to the recovery environment with installation of Windows 8 media

  It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.

  Please follow the steps below. Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  (b), select the exact time and the type of keyboard.
  (c) click on repair your computer in the lower left corner.
  (d) select Troubleshooting to Choose an option screen.
  (e) click Advanced options in the form of resolution of the problems .
  (f) click Auto repair of Advanced Options screen.
  (g) following, choose the operating system by clicking on its button.
  (h) Windows 8 will then look for problems on the hard drives and verify that all required files are intact.

  Step 3: The restore of the system on the Advanced Options screen

  System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous state.

  You can follow the steps:

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  (b), select the exact time and the type of keyboard.
  (c) click on repair your computer in the lower left corner.
  (d) select Troubleshooting to Choose an option screen.
  (e) click Advanced options in the form of resolution of the problems .
  (f) select System restore.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• Having problems installing stylized Ethernet driver for HP Pavilion dv6-6c35dx

  I just bought this laptop and put my licensed copy of WIndows 7 Ultimate 64 - bit edition on it. I downloaded the RaLink driver installation program for the local wireless network and it says that it supports RT5390, RT3592, RT3090 wireless LAN chips and which are integrated into the motherboard of the laptop. When I try to run the Setup program, the program runs and everything closes and a message appears saying that the program cannot be installed correctly. Just click that the program installed correctly. But when I check the Device Manager, it still mentions the network controller with an exclamation by it as if the drivers never. The Realtek drivers for the installed perfectly well wired Ethernet connection.

  I made sure when I did a search for drivers on the HP site, I chose Windows 7 64-bit like the BONE of his choice. And in fact, it was the only choice available, then it is certainly qque I selected, so I should have wnet through the right path to find the correct drivers.

  I tried also to extract the files from the installer of RaLink 802.11 b/g/n WiFi adapter and righ clicking on network adapater will open the exclamation and do a update driver and pointing to the file where I extracted the files, and it is said that cnanot WIndows find the drivers for this device. I even tried the option to picj a list of drivers already on the computer and I found the Ralink option (so, it seems, the instraller put the RaLink drivers in the Windows driver repository), but each of them I try in the list, it says that Windows cannot determine whether the driver is compatible with your hardware and ask if you want to install anyway. I go ahead and select Yes for each of them and they install, but none of them work meaning that the devicxe is now the name of this driver, but witgh an exclamation that she.

  I even tried older versions of the driver and still the same issue. I also looked on the Internet for other versions of RaLink drivers, but none of them work.

  I'm also not sure what RaLink WLAN chipset is integrated with this laptop the laptop didn't come with a manual and it doe onst say on the box, or downloaded manual what kind of WLAN adapoater is integrated into the motherboard. Is the 3090 RT, the RT 3592, or the RT5390, or something else.

  I tried everything and nothing seems to work. Any ideas. Or is there anywhere I can find it files right driver for the chipset WIFI built into this laptop for Windows 7 Ultimate 64-bit.

  Gretaly help appreciated.

  Hello:

  You got the ' right but the manufacturer R bad.

  You need Realtek WLAN driver (don't feel bad, I don't see it even listed on the support page and the driver of your laptop).

  See if this one is for you. The ID of material you posted decoded to the Realtek RTL8188CE Wireless LAN 802.11b/g/n adapt.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100014-1&cc=us&DLC=en&LC=en

  Paul

• Help with Bluetooth after installing new HARD drive

  The hard drive failed on my laptop HP Pavilion dm4 3099se Beats Edition son. I replaced the hard drive, installed and activated Windows 7 64 bit (using the key supplied with the notebook windows). I used an oem Win7 disc, not the recovery disk.  Then I installed the drivers needed to make it work again. But I can't get the Bluetooth works, even if the wifi works. Use the Intel ProSet Wifi driver but the Intel ProSet Bluetooth driver returns an error when it is installed... and Bluetooth does not appear in Device Manager.

  I installed the ProSet software also. It is also an error "can not properly installed. I have not installed the HP software (which I hope it is not necessary).

  Is there than a bluetooth radios category in Device Manager?

  If so, then the generic microsoft drivers have been installed.

  Otherwise, the device is not enabled and is not being picked up by Windows.

  If you have not installed the software of HP connection manager, and who controlled the bluetooth when you reinstalled the hard drive, you need to install this software, turn on the BT using this software and go from there.

  On some HP business notebooks computers where the wizard wireless HP (predecessor to the HP Connection Manager software) controlling the wireless and bluetooth at the same time and no device showing in Windows when I reinstalled the operating system, which has happened to me.

  After installing the Wireless Assistant software, the two aircraft were then visible and I was able to install the drivers.