No control over the computer for printer 8600
My printer 86600 suddenly has no control of the computer. For example, no option to scan and email, scan and save etc. What happened and how do I get that back.
Thank you for that updated information.
If you only have these options as you said, I would recommend uninstalling/reinstalling the HP software. Also, what is your operating system on your computer? Windows. Please follow these steps:
First of all, please uninstall the software by following this document HP uninstalling the software of the printer. Then, you want to clean your Temp folder. Please follow this document here to help you.
Now, install the full features on the site of HP software here. Choose your appropriate operating system and download the software. If you need help to install the software, I'll give you a document from HP on install the software of the printer on a wireless or wired (Ethernet) network.
Please post your results again. Have a good night.
Tags: HP Printers
Similar Questions
-
My Photosmart HP 7510 is not recognized by the computer for printing.
It was working fine, until what we replaced our router with a v3 TG797n I have reset the printer and reinstalled the software on the compters several times but it still won't print. During the new printer 'Add' processes on the computer will not find the printer, even using the intellectual property. The printers IP is coming as 10.0.0.34, all printing test through the printer directly arrived as work, connected to the corect network.
When I look at the routers settings it says that he recognizes the device with IP 10.0.0.34, but I have computers (an XP desktop running at the time) and a HP Pavillion Dv6 with Win7 cannot always find and say it should be disabled.
I downloaded and tried all the HP diagnostic tools, and they all tell me that my printer is not activated on/not connected and offer no alternative.
I've had the printer for less than 6 months and already he had replaced with a new one because it was defective, and now it gives me a headache.
In addition, we have updated the Office of Win8 and cannot install printer on that. I checked the lists on this site as to what printers are/are not taken in charge and I didn't know that the HP Photosmart 7510 nowhere mentioned at all.
And as usual, after trying everything (it has been two weeks now to try different things) and then post online for support, trying one more time and it works like magic again.
I downloaded the HP printer, troubleshooting thing once again (the third time) run the wizard and found the printer (the second time), downloaded the drivers rather than using the disc (for the second time, the first time that the installation has failed just a t at the end) and intsead to add the IP address of the printer in step "COnnect network printer", I looked at the user name for the device on my router (HPDDxxxx), and which came to the place.
********************************************
EDIT: 02/11/13Tried to print something today - once more the computer cannot connect to the printer. Printer is always connected. No parameters had changed since I got it to work.
Why is this happening! I need to print things! Very close to giving up. However, I doubt that I will get a refund of HarveyNorman, because when they test it out it will connect, and that's enough for them not to say 'no refund '. Ugh.
-
Hello - I'm trying to reinstall CS3 on my MacPro which is not online. It runs OS 10.5.1. He is a dedicated computer for printing on an Epson 7900 and I intentionally keep the older CS3 for this purpose. (compatibility). My hard drive crashed with all my top software, so I replaced the drive and now trying to reinstall my CS3. How can I do this without an internet connection? It will not take my initial activation codes, and this computer is not online. pointers out there?
Contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html
-
C7280 - cannot scan. Error message indicates another program has control over the device
I open the HP Device Manager to do a scan. I accepted the parameters and the scanning started. But the part passing through the analysis, I stopped the scan that I realized that I wanted to change the resolution. I leave the Manager device and rebooted but when I did, I got to tell an error message:
'Cannot perform the function you have requested because another program has control over ice dev'.
I have nothing else open and so I can't work on what program has control over the printer.
C7280 Prtinter. Mac OS x 10.7.
The Device Manager has not been updated for Lion and there is still no specific Lion software for your printer.
So far, you have the choice of scanning with picture Capture or preview. I'm sorry.
-
The ' sort by ' disappeared in the menu toolbars. No need for control over the Organization of files and folders. Please advise.
* original title - I can't delete automatically rearrange the menu toolbars so that I can sort the folders and files that I have wish.*
Hello
· Were there any changes made to the computer until the problem occurred?
· Have you tried right click and check the context Menu?
· This happens for any particular folder?
Step 1:
You can check if the same thing happens in a new user account. To create a new user account
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
Step 2:
If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Vista goes to 50% CPU usage and connects the computer for hours after the beginning
Original title: Vista processor
Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start. Cannot run anything with any request of CPU without getting bogged down and crashing. It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU. The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off. Should I just pull the machine and go for Linux, or what? Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse. Is that all I can turn off to get the same performance than, say, windows 3.1? It would be preferable to the current situation. MSCKMA.
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?
Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)
-
How to show the ink levels on the computer for Officejet 6600
How to show the ink levels on the computer for Officejet 6600
What is the full product name or product number?
This is the Manual of your printer the following image was derived.
You can use the printer's built-in web server to get the status of the printer information from a browser.
-
How will I know if I'm connected to a network? IP address conflict arises and I don't know what to do. I forgot to get the book "Learning the Computer for Dummies", which I should have got that I'm completely computer illiterate! Please, someone help!
You can have an ip address conflict if you are connected to the internet through a wired or wireless router that allows two or more computers or other devices in your home to connect to the internet at the same time usually by means of a cable or dsl internet provider. You can have this conflict, even if the computers in your House did not implement a network to share files and printers between them. You can go to control panel > network and sharing Center to view network information.
A common situation that can lead to a conflict of ip address, it's only 2 (or more) computers or other devices are connected to the router (via ethernet or wireless), and both have ip addresses assigned by the router automatically, one of the computers, then past in mode 'sleep', and while we sleep the router restarts. When the router comes back online he doesn't know the computer sleeps is here and that he already has an assigned ip address and so it gives the ip address of the other computer. When the computer asleep wakes duplicate error will be triggered. It can be solved by turning off computers and turn it back on so that the router will assign them new ip addresses. If this is not what is happening in your situation, the following may help: http://windows.microsoft.com/en-US/windows7/Get-help-with-There-is-an-IP-address-conflict-message
-
Why my MBP retina nine come with only 100 GB against 120 GB as shown. (He says 20 GB has been used, but I just bought the laptop) is enough space of 100 GB. I'm not a gamer or anything like that. Just need the computer for College
How to report the storage capacity - Support Apple OS X and iOS
If you bought the Apple MBP, you have 14 days to swap for a most appropriate mac.
If bought from a different dealer, you will need to contact them about the Exchange / return policy.
-
My Canon Pixma 250 pull the paper into the machine for printing
My printer will not pull the paper into the machine for printing. I tried to clean the roller, it won't even. Any suggestions to fix this?
Hello
I suggest you to contact Canon support for assistance.
-
My old computer which does not has RAM 1.00 GB Dual-Channel DDR @ 106 MHz (2, 5-3-3-7), while the anther computer, I bought recently has RAM DDR 400/128 bits. Can I use the old memory of the computer for the newly purchased computer. Are they compatible? Thank you
Hello nonmae,.
You must use DDR 400/128 bit RAM in your system. @ 106 Mhz DDR is quite old. It's also much slower than the DDR 400. RAM is not particularly expensive today and it is always best to stick to that suggests your PC user manual.
You must use the same speed too, if you use a lower speed, the memory of your PC by default at the lowest speed, thus slowing the PC
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
HP deskjet 4515: changing the settings for print quality
Hi all
How can I set the print quality of my printer on my macbook to project quality and black color only
Welcome to the community of HP, @ahmadzamzam
Here is an article for you to see which should help you to change the settings for print quality on your Mac. Please be aware of the ads on the article page and not click on them (or just close them).
MacLife: How to optimize your print settings
Good luck
-
I would like to know why I have so few restore points (7) when I got the computer for many months. My last restore point was on 07/02/13 and have a total of 3 automatic restore Points. With my previous version of Windows XP, I used to get a calendar that shows the many restore points for the month, and at least one System Restore Point otherwise every day at all the two days. I don't know what the problem is or how to fix. I have 10% of my hard drive allocated to the restoration of the system, and I am running Windows 7 Home Preium Version.
Original title: System Restore
You only ever need a good restore point and it's just before all of your troubles start.
XP is what it was...
All about Windows 7 restore points...
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
-
If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer. I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.
You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?
Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »
And do the same for entries under Human Interface Devices (HID) device as Manager.
Then restart...
Maybe you are looking for
-
Como playsecure musica del iphone to the mac
A few days ago vi as una persona estaba reproduciendo in iPhone 5s su musica y manera remota was than the misma musica repoducirse in su Mac iTunes will. Como is hace esto? one app?
-
Blue screen issue started after the warranty more
Hi I bought a HP laptop and exactly after the warranty period, there is a problem. And provided HP customer support a lot of drivers to install but not working. Seems that if we extended the guarantee we will get the right driver to install. My previ
-
Error code: 646 & dt000 (cannot install updates)
I tried to install three updates and repeatedly received this code Update for the junk e-mail in Outlook 2003 (KB2279246) filter Update of security for Microsoft Office Excel 2003 (KB2264403) Update of security for Microsoft Office Word 2003 (KB22513
-
Hello In our House we have 13 devices at the same time to use the internet, of which 7 are used by one man, why, I don't know. This unequal division brought some great inconvenience because internet high speed was brought too. I used my WRT160N route
-
Problems with Windows XP Pro to Windows Vista computer networking
I'm totally frustrated. I got a home network that worked with a PC running Windows XP Home and a laptop running Vista Basic. Then, I added a PC running XP Pro and it has added to the network. He works for a while and I was able to share files and pri