No cursor on the screen to connect to the start or restart

Similar Questions

• Vista, loss of internet connection on cold start and restarts.

  I use windows Vista, recently (after only 4 years of satisfactory used) I lose the internet connection on cold starting and restarting and duty use windows diagnostics to establish the connection.  I bought a new Modem Sagem, and cable ethernet and filters, still the problems persists.  ISP tells me that the problem is with Vista, can anyone help please?

  The game may 17, 2012 03:43:10 + 0000, BIGKEV2257 wrote:

  I am not satisfied by McAfee, three days and three nights, waiting for their technicians to ring me, I get automated emails asking if I'm happy and saying that they can not communicate with me, seems since Mr. McAfee sold his company, that it went to the pack, and I understand not why Microsoft sell McAfee with new computers when mcAfee are not appropriate technical support.

  Two points:

  1. in my opinion and that of many others of us here, McAfee is one of
  the poorest choice of security these days software here. I strongly
  recommend you take and replace with eSet NOD32 or
  Kaspersky, if you are willing to pay for it. If you want a free
  antivirus, I recommend one (do not run more than one antivirus
  program) of three of the following:
   
  Avira AntiVir
  Avast
  Microsoft Security Essentials
   
  You also need anti-spyware software (even if you run a program such as)
  Microsoft Security Essentials, with integrated anti-spyware capability
  It). I recommend that you download and install MalwareBytes (freeware)
  AntiMalware
  2 Microsoft isn't selling McAfee with new computers. Microsoft
  is not even do or do not sell computers. If your computer comes with
  McAfee, it's because the manufacturer of your computer (Dell, HP,
  Gateway, or anyone else) has chosen to sell like that.

  Ken Blake, Microsoft MVP

• HP Pavilion 500-330 Desktop PC blue screen with the cursor after the start

  I have a desktop computer Pavilion 500-330 Windows 8.1 running on a 64-bit system. The problem is after the start, a blue screen with a cursor appears, and the computer does not go to the lock screen.  I did restore, get updates and even left the only blue screen, but after many hours, he was always there.  If I do a force re-booting, the lock screen comes, but not always immediately.  There is no problem to wake up when it is in "standby".

  Any help will be appreciated.

  Hello again @padway,

  Actually, if you already did a cover of the plant on your computer the problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html. As a recovery plant excludes any kind of software problem this is your best course at this time. A technician from the local computer or a computer repair shop may be an option if you are not in the warranty as well.

  I want to thank you for display on the HP Forums. Have a great day!

• F2, F8 and F12 nonfunctional at the start or restart

  Windows 7 Home Premium desktop Dell 545 and Dell keyboard most of the work with functional keys once the initialization is complete. However, the start and / or restart the "F2", F8 and F12 keys do not work as expected.

  Hello

  Yes in the sense... only some of the USB ports are powered so possibly that other USB ports have been
  one is not powered, more in charge, or both. Using a hub external powered USB is a good idea
  When you use a lot of USB devices. Some USB devices have to be connected to a motor
  Hub USB port. A powered USB Hub has a cable that plugs into a power outlet.

  Rob - SpiritX

• Desktop icon and the taskbar disappears from the start and restart.

  ergent

  My dsktop icons keep disappearing at startup and a reboot on my computer and close any windows program, that I opened after a minute and the lower tab also disappear and the Task Manager does not open any help

  Hello

  Welcome to the Microsoft Community Forums.

  Description of the question, I understand that when you start taskbar and the desktop icons disappear.

  1. What is the brand and model of the computer?

  2. you remember to make changes to the computer before this problem?

  I suggest you follow these methods and check if it helps.

  Method 1: Fix broken desktop shortcuts and common system maintenance tasks
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2: Try to rebuild the icon cache and then check out.

  a. Click Start, click Control Panel, and write in the search options for files box.
  b. now, click on Folder Options to open and select folders and hidden files (dot).
  c. open a Windows Explorer window.
  d. go to C:\Users\(User Name) \AppData\Local
  e. right click on IconCache.db and click on delete.
  f. click Yes to confirm the deletion.
  NOTE: This removes the file to the trash. It is safe to empty the trash when you are done.
  g. close the window.
  h. emptying the trash.
  i. restart the computer.
  j. When you come back, you will notice the size of the file IconCache.db is reduced, and the update is now the current date.
  NOTE: If for some reason any IconCache.db isn't there or the size has not much changed then you can just restart the computer again. You may need to restart a few times in some cases.
  k. icon cache will be rebuilt.

   

  Method 3: In addition, run a virus scanner and check.
  Searching using check and scan Microsoft security if it is an infection that causes this problem.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  I hope this helps.

  For the related issue of Windows or anything related to the Windows operating system, do not hesitate to contact us and we will be happy to help you.

• How can I set a default cursor to the start position?

  I need to wait for a serial number to enter.  I don't want to wait for the operator to hit keys.  I understand the part "update as you type" and I have a little delay waiting for the scanner to enter the loop number then account for a few seconds and passes information.

  My problem is I need the currsor in the text field to start and I can't find it.  Is it possible to focus on the text input field at the beginning upward?  This would let me just call this routine entry-level scanner and no need to use entries of the mouse or the keyboard.  The operator can scan and go.

  Thank you

  Ben

  

  Mike beat me by quiet some time and remember that I had to open lv and print the screen stuffs...

• Blinking cursor at the start of the desktop computer

  Original title: flashing - cursor does not match other scenarios that I read on

  When I turned on my desktop computer (Win 7) today, it started all the way to the office, but the cursor will not stop flickering. I can launch programs, but the cursor just keeps flickering. I rebooted and got the same results. All of the other answers I've found are where people are not able to boot at all. As I said, I can get all the way-just can't do not have the cursor moved! I checked my (optical) etc. of the mouse. The computer was fine when I stopped last Eve. It's just that when I started again today, and help the can't diidn restart. So, any ideas, anyone? Thank you very much!

  Hello. My mouse is a Logitech. Not sure of the model (I write from a location different than the House and can not ck at the mo). Nothing has changed re hardware/software. As mentioned, it was fine when I stopped, flicker when I rebooted. Have you tried again today and he is always wavering; so, we have two reboots since it began and no improvement. I'll try the other suggestions once housed. Will post back. THX.

• How do we prevent a program run at the start or restart

  Windows XP Home Edition. Magic jack starts when I boot system and I don't want it. How can I fix

  Hello

  With the help of MS Config is always a good option, but you must be sure of what you are doing here because there are number of programs and services that are running,

  If you want to think easy and simple, you can use windows defender if you don't have the program, you can download it here

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=435BFCE7-DA2B-4A6A-AFA4-F7F14E605A0D&displaylang=en&mg_id=10134

  After you install windows defender

  You can open to Defender

  Click on tools

  Click Software Explorer

  And choose Magic Jack and disable at startup,

  You can also use this program to disable other programs you don't want to start when loading/starting allow your computer startup and load faster.

• Windows 8 black screen and the cursor after the connection

  Hello. I tried to upgrade to 8.1 Windows 8 Windows and it is stuck on like 3% for one hour, so I just rebooted the computer and he returned to Windows 8. I'm going to sleep and come back the next day and go on my laptop and it auto connects me and it goes to a black screen and I only have the slider on the black screen after login. I don't see the start menu, but I receive notifications for as sticky keys or any other notifications lights. I turned off my computer at least 20 times, took out the battery, empty the battery and tried to boot in safe mode with no luck. It is unlikely that it is an internal problem, because if I leave my computer alone for a few minutes, my screen saver photos appear. If anyone can help me solve this problem or help me get in easier safe mode would make things less stressful. I have an Acer Aspire V5 - 571 series. Thank you.

  Hi Roy,

  This problem may occur because of corrupted on the computer boot files.

  I suggest you to perform the checking and automatic repair if this solves the problem.

  If you do not have a DVD of Windows 8, I suggest you check out the link to see how to create an installation of Windows 8 media:

  http://Windows.Microsoft.com/en-in/Windows-8/create-reset-refresh-media

  Follow the methods suggested below:

  Method 1:

  Start on the recovery environment using the installation of Windows 8 media.

  Follow the steps below:

  Note: before proceeding further, make sure that the boot priority is set on DVD drive in BIOS. BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  • Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.
  • After you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  • Select the type of keyboard and good time.
  • Click repair your computer in the lower left corner.
  • Select Troubleshooting in choose an option screen.
  • In Troubleshooting screen, click Advanced options .
  • Click the automatic repair of the Advanced Options screen.
  • Then choose the operating system.
  • Windows 8 will then pick up questions on the hard drive and check that all required files are intact.

  If the problem persists, proceed to the next method.

  Method 2:

  Follow these steps to perform a system restore:

  • After you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  • Select the type of keyboard and good time.
  • Click repair your computer in the lower left corner.
  • Select Troubleshooting in choose an option screen.
  • In troubleshooting screen, click Advanced options .
  • Select System Restore.

  For reference:

  http://support.Microsoft.com/kb/2756559/en-us

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please let us know the results.

• Hi, while writing an email online using Firefox 3.6.3, I was using one of the "CTRL + left arrow or right" to move the cursor on the text. I must have pressed some other key because the screen has become huge - and I can't scroll vertically or horizont

  Hi, while writing an email online using Firefox 3.6.3, I was using one of the "CTRL + left arrow or right" to move the cursor on the text. I must have pressed some other key because the screen has become huge - and I can't scroll vertically or horizontally, which makes the pages of Mail of Hotmail impossible. I have connected since using the Explorer MSFT and it works very well. This problem occurs only on the page of Mail of Hotmail Live not on the home page or other.
  Could you please let me know if there is a problem with Firefox, or if you have any advice on how to restore the appearance of Hotmail in Firefox?

  This has happened

  Just once or twice

  == I'm compiling an email in Hotmail Live

  See this:
  https://support.Mozilla.com/en-us/KB/page+zoom

• T400 problem booting from the hard disk, blinking cursor on the top left corner of the screen

  I have problems with T400 (2765-TDG). He struggled with the Setup, which requires power 5 minutes/disable to propely operating system boot.

  Computer laptop is less than two months, entirely properly the driver being up-to-date, then after that, nothing's been done about it to user or system administrator. Problem occurred suddenly after two weeks of mentioned maintenance.

  Symptoms:

  • After initialization of the mouse, screen goes black, and the upper left corner white cursor starts to Flash
  • There is no key keyb which can contine begin the process, wait for the reboot
  • There is no other device connected to the laptop, even mouse not
  • We have several, sometimes 3-4, sometimes even 10 times, to restart with the power button in order to get the boot of the operating system
  • When he is successful, just before the start of the operating system, the boot in diagnostic mode to start (with fast start disabled) I can hear only a single beep

  What I tried to do:

  • I changed the BIOS setting to force booting only from hard drive, cut off from any other starting device.
  • Also, changed from AHCI mode to compatibility for hard drive, but without help.
  • Turned off the coast of quick start, but during the startup process, there is no specific error indicated
  • Updated version of BIOS to 2.03 - 1.01 but with no help
  • Restored the default BIOS, no help

  Done some diagnostics generals, and here is what I noticed:

  • After changing the settings in the BIOS, save & exit, the computer hangs with a black screen. I have to turn off and on in order to continue the initialization. The settings in the BIOS are registered correctly.
  • When I was able to boot into the operating system (XP), graphics card sometimes is not recognized, not even by the original driver installation. In Device Manager, I have two graphics card drivers recognized traffic sign with "Intel management engine interface" device with warning sign
  • In Event Viewer, and then only error line is "Problem with HECI driver communicating with firmware" or something like that
  • Operating system is not able to enter in standby mode, it justshows white screen and I have to turn off the laptop by pressing the off button longer

  Any help appreciated. Thank you! I hope I can cope with this before I send laptop to the authorized service.

  Vedran

  I'm sorry to tell you, but in case, can I had to send laptop to the authorized service provider. They replaced the motherboard and the hard disk (!). Now, everything works fine, but puts shame on Thinkpad T series notebook.

• Slow cursor on the login screen; How to control the speed?

  I got a laptop HP Win7.  I don't know much it.

  When I on the connection of the screen (account login), the cursor moves very slowly.

  How can I control the speed of the cursor on the login screen?

  I know that when I log on a user account, I can go to a control panel to control the speed of the cursor.  In fact, I did.

  But apparently, which affects only the current user.

  Thing certain, happy to help you.  Just a quick warning: registry changes can break your PC, so proceed with caution. That being said, it must be a very painless process.  Here's what I suggest.

  1. Create a system restore point.
     Prevention is better than cure and this takes only a second.  Type "restore point" in your Start menu, choose the option "create a restore point. In the box that opens, go ahead and click on create and name it something like 'before you make changes to registry' and save it.
  2. Open the registry editor.
     Press the Windows Logo key and type R to open the run, then run regedit to open the registry editor. Accept the UAC security prompt if you receive one.
  3. Go to your mouse settings.
     Access the mouse of your own user profile settings in the registry. It works a bit like the shirts, then navigate to this path:

     HKEY_Current_User\Control Panel\Mouse

     Once you open this key ("record"), you will see all your settings of the mouse on the right side of the window.

  4. Export your own settings of the mouse to a file
     Right click on the folder of the mouse, choose export and save it to your desktop.  Close the registry editor at this point, we're done with it.
  5. Change the saved file.
     We use this file as a template. Go to your desktop, right-click the file that you saved, and choose Edit. It should open in Notepad.  We will only change the 3rd line in the file.  This is change you can do:

     Old: [HKEY_CURRENT_USER\Control Panel\Mouse]
     New: [HKEY_USERS\. Default\Control Panel\Mouse]

     After you have made a change to this line, close and save the file.

  6. Import the settings changed in the registry.
     This is the easy part. Simply double-click on this settings file and allow it to import into the registry when prompted.

  This is import your account settings and apply them to the. By DEFAULT, the account used on the logon screen.  Therefore, after you apply these, restart the computer and you should find that the settings are now on the logon screen.

  Please let me know how it goes.

• My cursor takes the form is no longer the hand icon to slide the screen down to close.

  Is no longer my cursor becomes a hand icon to drag the screen and I am unable to do it now.  Activate master to delete to close the active screen. In addition, there is no way to access the menu on the right to search, close, etc.. A way to solve this problem?

  Hello Mikal,

  I understand the inconvenience caused to you. I will try to help you in the matter of fixing.

  In order to understand the issue more clearly, I would ask that kindly provide me with the following information.

  1. Did you do any hardware and software changes to the system?

  2. Since how long you are having this problem?

  3. Do you receive an error message? If Yes, what is the exact error message?

  It is possible that this problem would have occurred due to corruption in the mouse settings in the system.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the built-in convenience store equipment and devices and check if it works. Follow the steps below.

  Note: If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  1. Press Windows key + R, type Panel.

  2. Type of Troubleshooting in the search bar, click Troubleshooting.

  3. Click hardware and sound, click on material and devices.

  4. Follow the steps in the wizard to run the troubleshooter.

  If the problem persists, please follow method 2.

  Method 2:

  Please follow the steps below and check if it helps.

  1. Open the "Start" menu by clicking on the Windows logo in the corner of your screen. Click on "Control Panel."

  2. Click the box in the corner of the window titled "Search Control Panel" and then type "mouse". The window will automatically display search results.

  3. Click on the word "Mouse" in green text to open the "Mouse properties" window

  4. Click on the tab "pointers". Under 'Customize', the window shows your current mouse icons.

  5. Click on 'Select Normal' to highlight and press the button "Browse".

  6. Scroll the list of available cursors and find the files named 'aero_link,' 'aero_link_l' and 'aero_link_xl '. These files contain icons of the hand in three sizes, from the smallest to the largest.

  7. Click on the file of the icon of the desired size. Press the button 'open '. Repeat this process if you want to change all other cursors. For your pointer still resemble a hand, do it for each other cursor on the list 'customize '.

  8. Press the 'Ok' button when you are finished editing all the sliders. The system will immediately change the appearance of the pointer of your.

  For reference:

  Please refer to the procedure described in the article below and check if it helps.

  Search, touch, & mouse

  http://Windows.Microsoft.com/en-us/Windows/search-touch-mouse-help#touch-mouse-search-help=Windows-8&V1H=win8tab4&V3H=winvistatab1

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > Connect wifi > my iphone doesnot ask me activation lock even if my unit is also found on

  every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > wifi connection > my iphone doesnot ask me lock activation that says that your iphone is connected with the old apple ID, please enter the id and password

  I always reset on find my optional equipment please tell me how to activate locking activation so that whenever I have factory reset my phone with finding my camera so my phone always ask an old apple and password

  I do not understand your question, but let me go with what I believe. Looks like you entered in iCloud and erased all the content and settings on the iPhone, and once you go by assigning back up again, you do not see something that you expect to see, for example, a request for an Apple ID. When you go through the installation process to select the language, etc., it must, at some point, ask you to identify yourself with your Apple ID. are you not see this?

  It would be better if you try to describe exactly what you do again. Also, without the help of any sign of punctuation, it is difficult to track everything you ask. Try providing the steps of what you do, and then what you see when you get to the point that you believe that something is going wrong. You mention both an old and new Apple ID, which is rather confusing.

• What is going on??? MY screen goes up and down control when I move the cursor and extends and shrinks when I move the cursor on the screen.

  When I move the cursor to the top or the bottom of the screen literally flies upwards or downwards. When I move the cursor through the scree, it expands or shrinks.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/
  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

  You may need to also a (hardware) problem with the mouse or the mouse driver.