No device available in real-time on desktop PC mode

Similar Questions

• Use of Custom Device or lvmodel real-time Module utilities

  Hello

  I tried to understand how to use the RT Set processor pool inside of a custom device or lvmodel vi. My idea is to use one of my multiple devices customized to configure CPU pools in the VI Init. I added my custom for the device project PXI chassis, but does not know how I can put these functions in my custom device. Otherwise, I thought I could use a RT project and then to generate a model for VeriStand since VI, but this does not work either. LabVIEW impossible to compile the VI containing the RT module functions.

  My question:

  How can I use the utilities of RT in A) a custom device or B) a lvmodel?

  Thank you

  Brent

  Assumes that the solution is quite simple. All I had to do was go to C:\Program Files (x 86) \National Instruments\LabVIEW 2011\Targets\NI\RT\vi.lib and add the library to the project.

  Note If you add an RT target to the project and create screws under the lens of RT and move to the top of the library is automatically added... with a few errors of path of difficulty.

  Still familiarizing myself with labview course.

• 10GBE Optical Desktop in real-time?

  Hello

  I was looking for possibly using card NIC a10gbe (dual-port of preference) for a project I'm working on that involves a standalone that will emit a lot of data to a desktop RT LabView FPGA. I tried to look through some of the models which would require a RT Office, but have not seen who could go 10gbe, gigabit only. Doesn't I may look on a model, or are there materials that could make 10gbe on a RT controller, etc.?

  Thanks for any help and if you know a card compatible 10gbe that would work with an office of RT, please let me know

  -weiz

  Hi weiz,.

  Here is an article from Developer area that lists the requirements for a PC in real-time: requirements for LabVIEW Real-time targets desktop PC.

  Under the support of the Ethernet Chipsets section it lists all chipsets ethernet you can use with different versions of LabVIEW RT. I checked those listed for LabVIEW 2009 and it seems that they are all Ethernet Gigabit controllers.  Unfortunately, LabVIEW RT support all models with 10gbe.

  Take care!

• Convert a desktop PC to a target of VeriStand real-time

  Hello

  I have to convert a desktop PC to a target of VeriStand real-time.

  What are the PC requirements to convert the PC to a target of VeriStand real-time? They are the same as the requirements to convert a PC to a time target real LabVIEW?

  http://www.NI.com/white-paper/8239/en

  What is the procedure to install the engine time real Veristand to the RT PC? Is this the same as the procedure to install LabVIEW Real-time to a RT PC?

  http://www.NI.com/white-paper/2733/en/#toc4

  And what I have to install engine LabVIEW Real-time before installing engine VeriStand real-time?

  Last question: can I install the engine time real VeriStand on a PXI controller - 8115 Windows by creating a dual boot on my own? (PXI-8115 can be purchased with Windows or LabVIEW RT or the dual boot Windows/LabVIEW RT.)

  Thanks for your replies.

  Best regards.

  David

  (1) Yes
  2) kind of. Neither veristand engine is just an application that runs on the RT or windows. So once you follow this guide to make the target RT desktop computer you can install the NIVS motor application through MAX
  (3) Yes. Remember that the nivs engine can run on windows or RT so if the 8115 runs windows, you can run NIVS targeted toward you. If the 8115 runs RT you would need a separate windows PC and target the 8115 from that. Or you could put the hypervisor (if the 8115 supports) to simultaneously run windows and RT on the 8115 and so to run the client side NIVS windows targeting the engine on the side of the RT veristand... About a penalty of 50% of the performance

• Pass an array of real-time desktop PC

  Hello

  I recently started using LabVIEW Real time. I want to transfer an array of data from a PC to office to a PC in real time. The data transfer is time and once real PC will make further processing of the data. I'm using LabVIEW 8.2 and the corresponding version of the time real LabVIEW. I do not understand how to program the time real PC to receive all the elements of the array in the order. Below is a brief description of what I've tried so far.

  At the beginning, I created a shared variable on the computer which was the data type double target. I activated "Buffering" and set the size as 10 double rooms. Enable FIFO tab real-time time real FIFO, selected several items and set the size as 10 double rooms. On the desktop, I used a loop for to transfer all the elements of the array in the shared variable. I used a 500 ms delay in the loop for debugging purposes. On the target side PC, I used a while loop, the same delay of 500ms and built a table reading the shared variable. To run the program, I ran the VI on the target PC and then the VI on the host. I could see that the painting was being filled with data from the host computer, but the first element of the array of host PC has been filled in the second element of the array on the computer target. Another problem, is that there is no way to prevent the target computer that the host PC had sent all the data and he had to stop the filling of the table. The first problem with lag of data can be attributed to the timing. But I don't know how to solve problems.

  I also tried declaring the variable shared on the computer target with the double data type 'Array of '. But when the data is passed from the host PC for the target computer, I don't see the variables reflected on the target computer.

  Is could someone please tell me what error I do here?

  Hello

  The problem has been resolved. It is LabVIEW time real 8.20 which has been altered. Therefore, did a re-installation of LabVIEW. Now I have the sample project attached (ex2.zip) in the previous post works perfectly. Thank you for your help.

  Kind regards

  Prashant

• Look at a FPS in real time of the events of several IPS devices

  What is the best strategy for the display of the IPS in real-time of the events of several IPS devices now that VMS filed end of LIFE?

  There was a nice view unique of all IPS events from all IPS devices run in VMS and I was wondering where I can tell people to receive the same information on their networks. I do not see in CSM and I do not think that they will find in MARCH. Please notify and correct me if I'm wrong. Thank you!

  You can use VEI. It is an observer of events that has a dashboard in real time also. You can import several sensors inside and view the events in real time.

  Link to VEI to 5.x versions:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/IPS-EV

  Link to VEI to versions 4.x:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/IDs-EV

  Kind regards

  Maryse.

• display of the work plan in real time for mobile devices?

  I do my design in illustrator before exporting all the assets for use in mobile applications. Is there a way to get the work plan to display on my mobile device in real time? As it is now, I have to save the artboard as an image and put it on my phone to see what it looks like.

  Hi Mike,.

  The answer would be 'no', at the present time. You are already one of the workarounds.

  Thank you

  OM

• No boot device available on a desktop XPS720.

  I am running windows 7. I changed the motherboard battery and it rises: no available boot device. I did diagnostics on the 0 and 1 Sata drives. They have passed the tests. It goes, however, the post screen and it appears. No. boot device available strike F1 to retry boot, configuration utility F2for. The boot sequence is as follows: 1. SATA hard drive on board.  Onboard or USB Floppy drive (absent) hard drive PATA onboard 2 (absent). Onboard or CD-ROM USB drive controller integrated network 3 (absent). Peripheral USB add-in hard drive (not present) the floppy drive is set to internal

  Restart, and then press F2 to open the BIOS Setup. Find and disable the floppy drive controller. (It may be called "Player A" controller, controller of "Floppy drive"...) Be sure to save changes before exiting the Setup program.

  TIP: next time you intend to change the battery in the motherboard, copy down all the parameters of the BIOS (work) current first and so you can quickly define everything correctly afterwards.

• using NI USB 9201 with LabVIEW Real-time

  Hello

  I try to use a USB of NI 9201 on a remote real-time target. Here's what I did: 1) tricked out of a desktop PC to serve as target RT using the instructions provided on the Web site of NOR. He now starts in an RTOS with LabView RTOS 9.0. (2) I communicated successfully with the help of a host computer that has a windows with LabView 2009 BONE and I installed the software from the computer remote RT target host using ethernet. However, my problem is when I plug NI 9201 USB on the target RT that I do not see the material listed on the devices tab in MAX and interfaces on remote systems. I tried to get the manuals for the HW 9201, but it seems not much explained here, or maybe I'm looking in the wrong places. Any help is greatly appreciated.

  PS: I am attaching 2 JPEGs for additional explanations (tab network settings and the settings of the system).

  Thanks in advance,

  Benoit.

  AVS,

  9201 USB is not supported on RTPCs please visit this link. Currently no usb-DAQ devices do not support an environment CRPC. Only the PCI DAQ devices are supported.

  http://zone.NI.com/DevZone/CDA/tut/p/ID/6913

• a pc with a stand-alone module, real-time can display of its own data

  Hi all

  It is sort of a basic question, and it's probably why I can't find the answer explicitly in textbooks or the forum posts.

  If I want to use a PC as a unit in real time, and I install the LabView time real OS on it and make an Application of real-time on another machine and compile it in the PC target in time real LabView, can I attach a monitor or a kind of screen directly to the PC unit in real time to display some data I need?  Or do I still need a Labview PC to act as a host for display data and interface with a user?

  Thanks for the info!  I have some experience of labview, making some other applications but I have never used the RealTime module yet so I don't know much. So if there is a good place for more information in time real LabView for use a PC as a device target, which may also be of interest and would be appreciated!

  Thanks again.

  Steve

  Hi Steve,.

  Our objectives in real time are designed to work in headlessly, which means that they are independent and have no user interfaces.  It comes to screens.  For a display of information, you must use a host VI, on a host computer. There are several ways to move data between a target RT and a host PC including, but without limitation, TCP, UDP, network flow, published static Variables of network and Web Services.  These are all covered in documents on best practices.

  Here is a page real-time best practices:

  http://zone.NI.com/reference/en-XX/help/370622J-01/lvrtbestpractices/rt_portal/

  Here's a page on the conversion of a desktop computer to a target RT:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/2733

  Good luck with your project.

• can't see changes to the photo in real time during editing

  Hello

  When I edit photo it won't let me see the changes in real time, unless I turn down hardware acceleration. I tried the update of windows and even downloaded the drivers two charts, but no solution. I read may be due to software mcafee, but I do not use mcafee...

  Thank you.

  Hello

  When I edit photo it won't let me see the changes in real time, unless I turn down hardware acceleration. I tried the update of windows and even downloaded the drivers two charts, but no solution. I read may be due to software mcafee, but I do not use mcafee...

  Thank you.

  ==================================
  If reducing the graphics hardware acceleration
  improves the issue... it's a strong indication that
  you have a problem with your video driver.

  Might be interesting to try to find the support Web site
  Mfg. of your video card for a Win update
  XP compatible video driver. Or... If your computer
  is a laptop... look for the support site for your computer
  Reference of the manufacturer.

  If you do not know the make and model of your
  Video adapter, see the documentation that
  supplied with the computer.

  Also you can find info on your video by driver
  go to Device Manager: you can launch
  By clicking Device Manager on... Start/run and
  type or copy / paste:
  devmgmt.msc
  And then press ENTER.

  Expand "Graphics cards" and right click
  the name of your graphics... then
  choose... Properties / tab pilot... FYI.

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. In addition, installation
  instructions that should be followed closely
  should be available on the support site.

  Once installed the new video driver... you
  can restore your full acceleration.

  Aslde the... If your editing functions have been
  working properly and suddenly changed... I am
  wondering if one of your Windows updates...
  updated your video driver.  Sometimes the new
  driver is not as functional as the one you have already
  a.

  System restore would have been an easy way
  to correct this, but maybe you could go to the device
  Manager and rolling toward the video driver earlier.

  (FWIW... it would be a good idea to create a system)
  Restore point before making the change)

  You can launch the Device Manager by going
  TO... Start/run and type or copy / paste
  devmgmt.msc
  And then press ENTER.

  * Proceed at your own risk *.

  Expand: Graphics cards
  Right-click on the name of the video card and
  in the menu choose... Properties / driver tab.
  Roll the button return to the version...

  (306546) HOW to: use the driver to restore roll back feature
  a previous Version of a device in Windows XP driver
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;306546

  Windows XP - Vista - 7 - restore video drivers.
  Removal instructions
  http://www.nvidia.com/object/driver_rollback.html

  How to roll back a faulty device driver
  for a Version prior to Windows XP, Vista and 7
  http://www.techsupportalert.com/content/how-roll-back-misbehaving-device-driver-previous-version-Windows-XP-Vista-and-7.htm

  Good luck...

• Is there a way to know what physical events are happening in real time?

  I just had a problem from my phone since last week. I wouldn't do something unusual. Knows running programs with regard to my knowledge and visible only windows are concerned. And my hard drive would be thrown open. I don't know which program is the cause. So I asked for help in the windows event viewer and look under hardware events because that's what I thought would contain the event in question. but it was empty.

  I'm here to ask you all, if anyone can help in this regard.

  Amit

  Hello

  Check these:

  Scenarios selected for monitoring performance with Windows Vista
  http://TechNet.Microsoft.com/en-us/library/cc748962 (WS.10) .aspx

  This free utility makes it easy to check the event logs - since you can check everything
  entry in the final minutes or other periods of time. Any or all of the event logs can be saved
  then deleted to make it easier also for future entries to read.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  z http://www.Nirsoft.net/utils/my_event_viewer.html

  =======================================================
  
  Sysinternals has utilties that can help such as Process Explorer, Process Monitor and others. Those
  and others are below.

  This is a pretty complete performance convenience store and a lot of these methods will contribute to
  your effort.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• SSM-10 real-time monitoring

  Is there a way to receive notifications on ssm module security events in real time, I installed in my ASA? Are some that traps SNMP the only option? Sensor health section has also on the prevention page home/Intrustion ASDM, recovery of events marked as critical "not consulted. How can I erase this? I view the events of the module, and this does not erase it. Does have to do with the product MARCH?

  You can use IME to monitor IP addresses in real-time. It also supports the management of events in real-time for IPS five devices. Have a look:

  http://www.Cisco.com/en/us/products/ps9610/index.html

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5729/ps5715/ps9610/data_sheet_c78-459033.html

  It is freely available to all customers have a valid service contract. Make sure you that you run 6.1.x code to use the IME performance management features.

  Concerning

  Farrukh

• BlackBerry Smartphones real time to sync with the calendar?

  I'm relatively new to Blackberry, my Motorola Q would make a synchronization of calendar in real time with my Outlook calendar on my pc at home. When I added an appointment in the Q, the Outlook calendar could be updated shortly, is it possible to do it with the curve 8330? So I don't have to come all day from home and plug it in. Thank you

  Hi and welcome to the forums,

  Wireless calendar synchronization is available only for BES users at this point, so if you or your business to work with a Blackberry Enterprise / Professional Server, then you will have sync wireless real-time.

  However, if you use the BIS service, you can only synchronize with Blackberry Desktop Manager with your PC.

• Dimension E310-NO BOOT DEVICE AVAILABLE!

  I tried to install a new 320 GB HDD, internal, in my Dimension E310 desktop environment, but I get an error message that reads, "floppy seek failure" on the 1st line, & below it reads "No Boot Device available, strike F1 key to reboot, F2 for Setup utility".

  Ive done hard drive tests that pass.  According to a Dell support link, so it could b a software problem.  I have to buy another software?

  The model starts just fine if I reinstall the old hard drive.

  I bought this model in ' 05, 6 to 8 months later would not start then a supporter of Dell Tech ran me through a reprogramming of the model.  Since the Ive started then every time the comp Ive had to press F1 for her to run, & Ive not had any problems since.

  How can I use my computer to work normally with the new hard drive?