No device found exit/entry

OS X 10.11.6

MacBook Air (13 inch, mid 2013)

1.3 GHz Intel Core i5 processor

DDR3 4 GB 1600 MHz memory

Seems that the problem started after you apply the security update 2016-001.

I get not all sounds using iTunes, so it doesn't happen only when you use Chrome

I run Malwarebytes to find viruses, etc and restarted twice

Please let me know if any other information would be helpful in troubleshooting.

Thanks in advance for your help,

Nick

Try the start mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system performs some cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.

Tags: Mac OS & System Software

Similar Questions

  • WINDOWS MEDIA PLAYER, "PLAY TO" - NO DEVICE FOUND MEDIA.

    THE WEEK LAST I WAS ABLE TO PLAY MY MUSIC THROUGH THE HOPPER PLATE USING THE BOX OF "PLAY TO"-IT WOULD AUTOMATICLY HOPPER THEN PUT HIGHLIGHT AND PLAY WITHOUT PROBLEM. TODAY, HE SAYS "NO DEVICE FOUND MEDIA." IF I LOOK IN CONTROL PANEL - OPTIONS OF DISSEMINATION OF MEDEA - IT SHOWS THAT THE HOPPER IS ALLOWED. HOW CAN I PLAY? UNDER SREAMING, I CHECKED AUTOMATICALLY ALLOW DEVICES TO PLAY.                 THANKS FOR YOUR COMMENTS!

    First of all, you should have windows on two machines running media player and if this is not enough to make your device appear in the Play menu, check again entry in the menu of the WMP Stream > "allow control remotely of my player...". "the machine that you want to make like Play-device and allow.

    I just did so last night successfully. As soon as I had to run WMP, I could have on the other machine under Play submenu of the WMP.

  • HP pavlion 15: Please HELP NO BOOT DEVICE FOUND

    I have a hp laptop that says no boot device found I checked the bios on that everything was the same so I won't change anything and I went to system dignotcts it wouldint work, that I keep for a day and today I keep the battary on the 5 min a6 and I put back my laptop truned it once again, and when he returned to no devices found Boot sccern I clicked on before F2 was a black is a blue fantasy the left now, and then Pentecost on the other one i made the screen a chip test passad I did another test it passed now what I do?

    If troubleshooting does not solve your problem, you need to perform a factory restore or using the partition recovery or recovery discs I hope that you created when you first got the computer:

    http://support.HP.com/us-en/document/c01443463

  • BCA install Win 10 since El Capitan "no boot device found". »

    I ran a Boot Camp for Windows 10 installation process using this configuration:

    MacPro3, 1

    El Capitan 10.11.2.

    Win10_1511_English_x64.

    Boot Camp Assistant 6.0.0

    I used a flash drive USB 2 for the installation disc.

    I modified the plist BCA as shown here:

    http://Tsentas.NET/create-a-Windows-7-or-later-version-install-disk-missing-on-e l-capitan.

    BCA works well, downloads support, creates what looks like appropriate on the USB installation files, and then create a MS-DOS (FAT32) partition on a hard disk that is dedicated in an internal Bay. At this point, it seems to be trying to boot from a Windows installation process and rise black screen "no boot device found... etc."

    Any idea whats up?

    Thank you, Bruce T

    Create a USB key modifying the Info.plist file does not work? There is a reason that it's missing at first, meaning that your specific model, with an integrated optical drive, needs to use a physical DVD. You can burn a DVD from ISO?

    Be aware that a 2008 MP has no W10 driver supported by Apple. A list of Macs Apple officially support it to use 10 Windows on your Mac with Boot Camp - Apple Support .

  • I have HP notebook: no boot device found after the death of the computer during the update

    During an update my PC is dead, I know it must have been plugged and now boots to no device found startup please install an operating system on your hard drive

    Hello

    Try the following.

    First, use another PC to create a bootable Windows 10 DVD or a USB Flash drive via the following link.  Under the section "Imperative to create a cable USB, DVD or ISO", download the media creation tool.

    http://www.Microsoft.com/en-us/software-download/Windows10

    Once you have it, run the tool, select 'Create the installation media for another PC', then select the language edition of Windows 10 and 64-bit.

    Follow the rest of the guests to create this and then click on finish when done.

    Insert the Installation of Windows 10 support and stop the laptop by pressing the power button for 10 seconds.

    Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

    Use the arrow keys to highlight the CDROM (uefi) or USB Flash Driver (uefi) option, according to which typre of media you created, then click on enter – if you are prompted to "Press any key to continue...". "- make.

    Start on the Menu of Boot Options Advanced - see Option 5 on the link below for more information on access to this.

    http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-Windows-10-a.html#Option5

    Then try to run the system restore Windows to return the laptop to a point in time before that happen this isssue - see Option 1 on the link below for more information on this procedure.

    http://www.tenforums.com/tutorials/4588-system-restore-Windows-10-a.html

    Kind regards

    DP - K

  • How to fix this error: "MPT Boot ROM - no device found!"

    Ideas: my IBM Intellistation Z Pro 6221 boot from IDE hard drive. Error message "MPT Boot ROM - no deices found!" error message is displayed. Machine will start from a USCSI drive when it is connected. IDE drive is then recognized as drive D: to hard drive which does not physically OK. Normal order of BIOS. While that started from the drive SCSI Windows detects the IDE drive and after a reboot, I get a message that says that the ROM of the MPT Boot has been installed successfully. But when I disconnect the SCSI disk and then try to boot from the IDE, I again get the error "MPT Boot ROM - no device found!"

    Does anyone have a solution that will solve this problem and get the IDE drive to boot normally again?

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Macz51,
    Thanks for posting on the Microsoft answers Forum.  The ROM of the MPT Boot part of the SCSI controller.  So, when you disconnect the SCSI drive, you will get the error message.  If the SCSI controller is a card, you can remove it, and then check your BIOS settings to start the command and make sure that the BIOS sees your IDE drive.  If you have problems with the hardware being not recognized before it starts with Windows, then you will need to contact your OEM for support. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • no bootable devices found

    Hi guys, I have a laptop malfunction on the no bootable devices found. I use acer 3810 t sucks. It was working just fine last night, but it is a malfunction of this morning.

    Looks like you have verified that the hard drive is dead!

    You can buy a new hard drive in a local store, PC or even online, like Amazon, among others. Opt for a similar or greater size than i ' existing. The size is noted in the UK, for example, 250GB, 500GB etc.

    Hard drive bracket is very simple as you may have noticed. You need to remove the caddy with the screw on the side of the old hard drive. Take the old, enters the new then put back inside your laptop. Once mounted, you need to reinstall WIndows from your recovery disks. If you do neither, they may be available for purchase from the Acer support for your region.

    Once completed, you will need to install Windows, your Anti virus updates and other programs, then all the documents you have saved.

  • No device found Boot

    Acer laptop: v3 - 551 G - X 419

    Hello

    Problems with the bios. Disabled the power button one night and now there are no bootable devices found. At the start of tours on the property, then a screen indicating there are no bootable devices found and invites me to press "ok". Which is followed by the screen boot manager with a boot option menu that I give no option to start. Now, I entered the bios and restored by default and messed around with the start controls. After playing with the battery in and out and pressing the power button to see if something could be reset. I thought that the motherboard did not read the hard disk, but on the homepage of the bios, I see the model number of the hard drive. Maybe a fluke I thought so I grabbed one of my hard disks and bios selected upward, but always was'nt able to boot into it. My next plan was to see if I could start a flash drive or external cd player, Showed up in the bios but not start and do not show up in the start menu. I decided to go and pulled the cmos battery in the system and reset the old way and still nothing. I can't get a boot cd and flash the bios or flash, I'm quite the situation here . It's not under warranty.

    http://imgur.com/MnWVY0p

    http://imgur.com/x0R53R6
    [edited to conform to the guidelines]

    Thank you for your time.

    New systems designed for Windows 8 use UEFI BIOS instead of the old BIOS Legacy. Your other HARD drive probably wasn't UEFI boot configuration no matter what version of Windows until Windows 8 does support UEFI. You must change your settings bios for Legacy BIOS to boot a usb or cd and based on the rest of what you said your HARD disk is probably damaged. So I suggest to test or with a surface HDD scan tool or if you know what type of HARD drive, this is the manufacturer test tool e.g. (Western Digital Safe Guard) or start a windows install disc and go to repair from the command prompt type chkdsk/r % DriveLetter %:.

    -Bennett

  • built-in Bluetooth is always 'no devices found '.

    I use windows xp sp3 on my laptop of HCL ME 38... my built-in bluetooth works well until a few days ago. but these last two days I noticed that the bluetooth icon showing evrytime 'no devices found '. Even on Device Manager there is no bluetooth device is here... all the guys the solution!

    I use windows xp sp3 on my laptop of HCL ME 38... my built-in bluetooth works well until a few days ago. but these last two days I noticed that the bluetooth icon showing evrytime 'no devices found '. Even on Device Manager there is no bluetooth device is here... all the guys the solution!

    Install the appropriate drivers for your particular machine at your special machinery manufacturer (or the manufacturer of the bluetooth device) and make sure that there is no physical switch (or enter the BIOS) accidentally disabled for bluetooth.

  • Printers with/without wire: "printer not found," "Can't find the printer," 'no devices found' (Windows 10)

    If you receive one of the following error messages, and your printer is connected to your computer via a wired or wireless network, see the troubleshooting steps in the following doc: printer not found during Network Driver Setup (Windows).

    • Printer not found
    • Cannot find the printer
    • No devices found
    • Your printer is not found on your wireless network

    The solutions include:

    Step 1: Restart the computer, printer and router

    Step 2: Check the status of network and printer connection

    Step 3: Manually connect the printer to your network (only for wireless connections)

    Step 4: Run the HP Print and Scan Doctor

    Step 5: Temporarily disable the firewall on the computer software

  • Critical error - no suitable graphics devices found

    Try to solve the problem of friends using TeamViewer, because they're 1000 miles :)

    He gets this message "Critical error - no suitable graphics devices found" on some of the games on Vista. I want to talk about Solitaire and Mahjong. InkBall works.

    Happened that recently so I suspected the Windows updates of the week passed and uninstalled them. No change.

    I uninstalled the graphics driver and had Windows download and reinstall. Same thing. I tried to download the latest drivers from Nvidia, but it fails on attempt (see http://img16.imageshack.us/img16/802...llerfailed.jpg).

    Because references to the problem of torque on the Interweb. Some have found using the system restore, but that came out under the name of each of them, I try I get a "system restore was not entirely successful," 'transient error', 0x800423f3.

    Someone suggested to remove and to reinstall .NET 1.1 which is a no go.

    Malwarebytes, Superantispyare and MSE are good.

    Thoughts?

    Hello

    This can help you to use the system restore to fix:

    1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    2. try to use Safe Mode system restore.

    http://bertk.MVPs.org/html/restoresysv.html

    See you soon.

  • no graphic device found

    I used WinZip systems Utilities Suite to clean my computer.  Now when I try to play games that I have played, I get a message that says no: "no suitable graphics devices found"... Help!

    Not enough information to be useful too.

    These games worked before the clean up?

    Look in Device Manager - display adapter and see what is listed, if you don't have a standard VGA driver, then you will need to reinstall your graphics card (video card) driver. You must have a CD that came with the PC or if it's a look of mobile to the top of the form model online. If you have a brand machine go to the web site of manufacturers for the latest version of the driver, if it is generic, go to site web graphics adapter to the to download the latest version of the driver.

  • Sony Vaio VPCSB1V9E Gobi OneClick - no device found

    Hello

    Try to get the WWAN OneClick internet running on my laptop. I have the SIM (network O2) inserted correctly. WAN wireless is lit in the center of the VAIO Smart but at the launch of Gobi OneClick Internet I get the message "no devices found".

    Did some research online - all I've really learned is that the laptop model I have include the Wan 3 G device - so I should be able to run it.

    Any ideas/help please.

    Thank you very much, Richard

    Greetings and thanks for your message. VPCSB1V9E seems to be a European model.  We recommend contacting Sony's Support Center in your area at http://www.sony-europe.com/pages/europe/sony_europe.html.

  • No device found startup error

    My laptop is showing an error "Checking media fail media control.

    No device found start? Press any key to reboot the machine. »

    I was using AVG TuneUp Utilities before that happened and my computer has suggested that I reboot-since its been this list this error.

    I ran diagnostics on my computer and everything seems fine. He said: there is no error.

    Before this error, my computer was crashing with the error "DRIVER_IRQL_NOT_LESS_OR_EQUAL smb_driver_intel.sys.

    My computer model is Windows 8 home Dell Inspiron R i15RM-3659SLV.

    I checked the hard drive and it is detected in the BIOS.

    I'd appreciate any help.

    Start Dell diagnostics - F12 to start execution.  Run the extended test - not only the quick 10 minute test.  If the player tests OK, chances are the AVG tune-up is at fault - I hope you did a set of recovery media when you received the system, because you will need it.  If you do not, you will need to call Dell for it (it's free if the system is under warranty - or you can buy it if the warranty has expired).

  • Boot Dell Inspiron 15 Series No. 5000 device found

    I just bought this labtop and worked well until, after about a week the necessary computer for the update of the Bios. I closed all running programs and helped update the computer. When I came back to check on my computer it would say no device found Boot press any key to restart. I could do this several times without success. I ran ePSA diagnosis and he said everything was working with the computer. Help, please!

    Assuming that you make any changes to the default configuration, make sure that the device is set to UEFI active and secure startup is enabled.  If those who has changed, the drive does not start the system.

    F2 at startup to get and select.

Maybe you are looking for

  • Pavilion 550-122nd: mouse and wireless keyboard do not work before Windows starts (10)

    The wireless keyboard and mouse (that came with the computer) do not work until Windows is started. I want to make a (ghost) image of my hard drive using the boot CD Norton ghost 15.0 (but it also applies to other bootable devices). When the CD boots

  • Bug in xml component audio with blocking clips

    I have a timeline / project with a 30 min show that consists of a multicam clip 5 angle edited. Most of the fixtures is the audio components for each of these angles. I am audio editing by creating a selection on the audio components and this area th

  • Cannot activate or its power on webcam on T420

    Just got a new T420 and tried the webcam function, but unfortunately it does not work. When the Fn + F6's press I don't see audio settings. I have installed the latest driver from LENOVO and rebooted the system, but it's always the same, just the aud

  • DLL of enforcement, error loading

    When I start Windows Vista I get the message: Run DLL error loading C:\Users\JOHNKL~1\AppData\Local\Temp\sshnas21.dll The specified module could not be found. How can - I solve this problem?, thanks

  • HP envy m6 - 1184ca: want m6 - 1184ca - downgrade from bad to windows 7

    Hello I reccently lowered Windows 8.1 for windows 7 64 bit on my HP envy m6 1184ca. The installation went well and there is no problem. However, I currently have a few post installation issues. The first is that I am having difficulties to install my