No device mixer active found - lost my sound on satellite Pro A100

Similar Questions

• Virtual sound on Satellite Pro A100 problem

  Hello.

  I have the Satellite Pro A100 (PSAAC) "PSAACE - 00200DG 3"with Windows XP."
  I recently formatted my hard drive and run my Toshiba Recovery CD. Everything worked very well. As I downloaded the latest drivers for my computer including the Toshiba Virtual Sound drivers. After I deleted the old Virtual Sound driver and started installing new version of same message appears "Toshiba Virtual Sound can't stand your computer."
  Then I tried to install a later version of the same thing that was on the recovery CD and I would get the same message again. Moreover, after any new installation of Windows XP, Virtual Sound works OK. Please someone had the same problem and could you give me a solution.

  Thank you!!!

  Have you downloaded the right version? I mean the version for your model of laptop (PSAAC)?

• No sound on Satellite Pro A100

  I'm a complete novice - I have a Satellite Pro A100 - portable PSAAPE

  It says it has a sound card, but I'm not all the sounds of him

  I tried following the resolution of the problems, but I still can't make it work

  Any advice appreciated

  John

  Sorry, but you can specify your problem more exactly. I mean, sorry, when I tell you that my car do not drive - do you know where is the problem? ;)

  So what I need to know is:

  -which is the OS installed?
  -the fact that you have installed the latest drivers?
  -have you ever tried to get your machine?
  -Since when the sound has stopped working?
  -a made his work before?
  -the fact that you have installed recently a few new pieces of software?

  If you can give me more information on this subject that I can maybe help you...

  Cheeers

• How can I add a stereo or mono mix to the sound engineer - Satellite Pro A100-196

  I can't find this option in my settings of the sound, no mono or stereo under record?
  is it possible to add this feature to my laptop?
  or is it possible to do to the sound settings to make them?

  Hello

  Can you please tell us what how you save the music? You want to import from an external device? If so how is it connected to your laptop?

• Error in device IO on the Satellite Pro A100

  I need your help

  I do Win Xp update and PRECAUTIONS Paltalk after that my DVD/CD is broken

  Error message I get: "D:\ is not accessible. The request cannot be performed because of an i/o device error."

  For your information, I have the Toshiba Satellite Pro A100

  Try to remove the drive from Device Manager. After the withdrawal, please restart the laptop. The operating system should recognize the drive again and you could check the functionality.
  But to me it looks to your training goal is dirty and it is unable to read the disc.
  Try to clean it, use a lint cloth and as the part of the lens is delicate, being very soft when you rub.

  I found that also this two links provided a useful info:
  http://support.Microsoft.com/kb/321641/en-us
  http://support.Microsoft.com/kb/891894

  guys good luck

• Satellite Pro A100 - audio artifacts / Virtual Sound

  My Satellite Pro A100 (PSAA3E) has a boring character: audio (MP3, DVD, MPEG audio, etc.) reading is accompanied by a rumbling of objects of type "underwater." The same files (audio or video) or played on any other computer in the House of discs play perfectly well.

  Since the problem seems to be related to this laptop, I tried to watch the audio software updates.

  I noticed the Virtual Sound up-to-date. Downloaded, he ran. Installation upgrade needed to the previous version to remove, I did. Re-directed the program installation and received the message: "Effect Audio TOSHIBA does not support your computer."

  Now, I still have the annoying audio artifacts, but I do not have any version of the Virtual Sound utility!

  Someone at - it guidance to offer on this situation?

  Thank you very much...
  David.

  Hello

  I can t believe that it of not possible to install it too much if it has been downloaded driver Toshiba and the box on the right page.

  I found a statement of installation for this laptop. He was placed in the pilot area.
  I think you should follow this guide to install the software and drivers.

  Sorry, but I put t see any other possibility to install Toshiba stuff on your laptop.
  As far as I remember that some drivers and utilities need other applications. Therefore, the order is important.

• Satellite Pro A100 - unknown device TOS1900

  I have a toshiba satellite pro a100. It came with XP installed.

  I recently installed a bigger hard drive and updated to Vista Ultimate (32 bit) operating system. I downloaded and installed all the drivers on the toshiba site but I still have a 'unknown' device in the device with a yellow exclamation point Manager, it details tab it says:
  'ACPI\TOS1900 '.
  * TOS1900»

  Can someone please tell me what this device is, and where can I find the right drivers?

  Hello

  Have you installed the Toshiba value added Package?

  Isn't it? To do this, and this unknown device should disappear

  Welcome them

• Device not detected, I lost the sound. It is said that the material change

  original title: device not detected

  Hello! I have Dell Inspiron 1545e and I lost the sound. It is said that the material change. But I looked at the problem. But it only shows the hardware changes. Please I need help.

  Hello! I have Dell Inspiron 1545e and I lost the sound. It is said that the material change. But I looked at the problem. But it only shows the hardware changes. Please I need help.

  Have you visited the suport Dell and drivers download page for your system (by serial number would be better) and download the driver for audio and install it?

• No sound in Satellite Pro P200 with XP

  Hi all.

  I have a Toshiba Satellite Pro P200 with Windows Vista preinstalled. I removed Vista and installed Windows XP with Service Pack 2, due to the incompabilités with some software I need. Almost all of the necessary drivers for XP (even a downgrade to BIOS) was downloaded and installed from Support from Toshiba web page. But there are still two devices that I can not install. At the start of my laptop it always detect "* Microsoft UAA bus driver for high definition audio *" and "* controller memory PCI - Chip for logical Cache Flash in Intel (r) *" as new hardware and they appear marked in yellow in the Device Manager list.

  I installed the last bus Microsoft UAA for high definition audio driver for XP from Toshiba and Realtek too... a lot of time and in different ways... Previously I installed the High Definition Audio Driver Package - KB888111 from Microsoft. But I still have no sound.

  PCI memory controller - Intel(r) Flash Cache Logic Chip: the same... tried the drivers the most recent Toshiba one Intel too. Toshiba technical support told me that this unit is ready to run on Vista and have suggested me to try with Robson drivers for Vista Support from Toshiba's web page, but that didn't work either.

  I googled a lot, searched this forum and called technical support, as I said, but I've not found a way to solve these problems. Really, I can't believe I bought a laptop that only works with Windows Vista, I resist assume this idea, so I continue to try and try to make it work properly with the operating system that I need and I have chosen freely.

  Any idea?

  Thanks in advance.

  Hello

  > I installed the last bus Microsoft UAA for high definition audio driver for XP from Toshiba and Realtek too... a lot of time and in different ways... Previously I installed the High Definition Audio Driver Package - KB888111 from Microsoft. But I still have no sound.

  You're on right way boyfriend, you must also install another patch MS; KB835221
  So finally the KB888111 and KB835221 must be installed before you will follow with the audio driver installation.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

  > PCI memory controller - Intel(r) Flash Cache Logic Chip: the same... tried the drivers the most recent Toshiba one Intel too. Toshiba technical support told me that this unit is ready to run on Vista and have suggested me to try with Robson drivers for Vista Support from Toshiba's web page, but that didn't work either.

  The problem is that this unit only works in Vista.
  The controller memory PCI is that intel Turbo Memory, also called Intel Flash cache logic chip also called device Robson.
  It's quite new technology designed to support the new features of Vista.
  There is not driver for it for Windows XP because XP doesn t supports the function of cache, it is supported by Vista.

  Hope I could help you

• No sound on Satellite Pro A120 with Windows Vista

  Hello

  I had to reinstall the Vista operating system and rebuild my Satellite Pro A120 from the revovery disk.
  Most of the things are fine, but I can't any sound to speakers of jack headphine.

  I checked said etil Realtek High Definition Sound Driver is installed and working properly.

  My volume buttons are up on the mixer and Windows Media Player.
  The driver is Realtek 6.0.1.5317

  Help would be appreciatesd

  Hello

  Please take a look here:

  + Audio cut off (no sound) after you install Windows Vista +.
  http://APS2.toshiba-tro.de/KB0/TSB7C021B0001R01.htm

  There is a tool that allows the sound again once it seems s Cup...

  Welcome them

• Activation questions Win 8.1 on Satellite Pro C850-1EQ after upgrade

  Hello everyone!

  I face a problem after the upgrade of my TOSHIBA SATELLITE PRO C850-1EQ preinstalled version of windows 8 to 8.1.

  After installation windows ask the product key to activate windows 8.1, but I don't have this activation key.

  I called Microsoft (Greece), but could not help me and told me to call Toshiba (Greece).
  The man of Toshiba technical support told me to remind Microsoft!

  In addition, he told me to check here (https://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/) before starting the process. Step # 7 says "don't forget your Windows password. You may need to enter after update. »

  Now, I'm back to Win 8.

  Is there a way to learn my activation key before installation of w8.1?
  I tried to find that the use of various tools, but nobody found the key.
  In addition, after 8.1 install, a message says:

  + Error code: 0xC004C003 +.
  + The activation server determined the specified product key has been blocked.

  I trust Toshiba and I want to use the latest version of w8.1.
  I'd be grateful if someone Toshiba technician could help me with this problem.

  John (from Greece)

  Hello

  > I'd be grateful if someone technician Toshiba could help me with this problem.
  It's community of users

  > Is it possible to learn my activation key before installation of w8.1?

  No, the preinstalled Windows 8 Toshiba is already activated and during the upgrade to 8.1 Win will not ask you to enter the serial key...

  Windows 8 is activated?

  Try this: create DVDs of Toshiba Recovery (or flash USB memory stick). Use the recovery media to recover the computer laptop back to factory settings. Update of the Windows 8 at the last State and then do the upgrade to 8.1 Win

• No sound on Satellite Pro 6000

  Hello!

  I have a problem with my sound on a satellite pro 6000.
  my rather is an audio Ali and is properly installed. (you do see something no yellow icon ore.)
  I also installed the device and rebooted the computer, but nothing happens.

  When I check my helmet on my laptop, I hear nothing.
  Can someone help me? Thank you.
  Greetz,

  Dominique.

  Have you checked the volume control on the side of the laptop?
  Yes, this seems very simple, but you can not believe how many people forget o activate this option.
  How about "Mute" settings?

• No sound of Satellite Pro A120

  Hello

  I recently lost all sound on my Satellite Pro A120. I am running XP SP2 and tried to uninstall and reinstall the Raltek drivers. Before that I went through the windows help program, but that only told me that everything was working fine. Can someone help me please.

  *@Allen237*
  Tecra 9100 is oldie! Don t compare this notebook with a series of Satellite A120.
  The sound does not work because the Yamaha audio driver does not support the Microsoft SP1 and SP2! This is the reason!

  *@jeffjames*
  To get the sound on the XP all Microsoft patches and hotfixes must be installed! Use the MS update page to get all the updates!
  Very important are the audio patches; KB835221and KB888111

  Remove all audio drivers, install patches and then after restart the compatible audio driver!

• No sound on Satellite Pro P100

  Hi all

  does anyone know how to get the sound on your laptop. I have a new Toshiba Satellite pro P100 with Windows Vista. I have no sound after installing Service Pack 1. But my speakers are turned on, and I see the noise level through control system / sound /.
  Speaker test does not work. There is no sound on my headset too. Any help will be appreciated, would be well as soon as possible.

  -Axel

  I always use my laptop without SP1 and have no such problems.
  Have you tried to install the latest version of the driver sound Toshiba support page?

• NO sound on Satellite Pro with Win XP - SOLUTION

  No sound with Toshiba Satellite Pro
  This did it for me (Windows XP)

  -> Control Panel - icon Speech - Audio output
  -Select an output that indicates normal mode
  -Realtek HD Audio Black ie printing output.
  -Click on the Volume.
  -Ensure that no box is cut

  Hello

  Thanks for sharing.
  This means that you simply disabled mute ;) and the sound didn t appear because she was mute