No digital noise

Similar Questions

• A60 excessive digital noise from headphone/output jack

  I have a new A60 (although three or four weeks) I work in the industry of music and must deal with music on the laptop. Everything has been fine until trying to empty to an analog audio output device. Digital noise is incredibly strong! Its there all the time but just touch the double mouse pad the amount of noise.

  With a headphones only sound, but not too visible through a preamp, well well its just unusable.

  Is anyway around this or should I empty the A60 and buy a ThinkPad?

  Hello

  I don't know, but in my opinion you have problems with parasite frequency. Please take some info by music experts. I'm sure it can be solved. If you want you can check one my previous assignment.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=6223&MessageID=21596#21596

  Good bye

• Digital noise in the output

  I hooked up a new computer. Started having digital noise of the output with Logic 9. Never had this problem. I've checked all my sample rate to match. I thought it would be in my Motu hardware, but when I turned the motu offshore and just ran through the output built in logic he was always there. I ran audio from iTunes and the internet in general and the noise is not there. Fair and logical. Biggest problem is he spent on the computer I was using, where nothing was ever a problem. No sound on both. Oh my god! Help!

  Guy

  Monitor your levels.  Make sure that nothing is in the Red of the level meters.

  Also, check your volume settings (output) on your computer and LPX.

• No digital noise will come out, only analog HD is heard through the speakers

  No sound from digital driver.  Although it seems to work normally, no sound is coming through analog plugs connected to the speakers at the back.  Should I change the GET connection__or one cable that converts analog versa__ pilootes or vice

  2 drivers high definition digital audio: NVIDIA and REALTek.  1 realtek audio of high definition.  They work normally, but internally because no digital noise will come out.  Only high definition analog sounds through the speakers.  The rear panel of the NVIDEA GeForce 8400 Gs system does not catch digital or taken to the sound system.  There are 6 analog for normal sound system.  Not digital.  I have optimized pc and digital audio and digital experience.  Should I buy some kind of jacks or cable analog-to-digital converters or another pile of sound cards just to get digital Pug face now in the speakers.  Help, please

  If I remember correctly, you have run in a common misconception.

  There is no plugins audo on the Nvidia card, nor on ATI cards, instead, they send sound to your analog "sound out" devices (which are paradoxically digital).

  And for reasons to ask: what color is taking you connected (both of em)?

• Help to create the effect of digital noise

  Hello everyone, thank you very much in advance for watching my post.

  I'm a graphic designer with experience of After Effects, but mainly work with Photoshop/Illustrator/InDesign. I want to create a series of charts that have been "glitched" and there is a very specific type of glitch look I'm after.

  If you take a look at this video you can see the kind of effect I want.

  My idea is that I have a glitch animation in After Effects. I would then use it as a filter for the videos and/or still look charts to give them a random bug. Unfortunately, I do not really know where to start. I was able to find some plug-ins Digital glitch for After Effects, but none of them are quite the same look I'll make. And I can create a fixed image of glitch with the look I'm after, but he wouldn't have the motion or random that I want.

  Anyone have any ideas on how to achieve this effect?

  Best,

  Matt

  Again, start by the bad TV preset animations and see what they do. Create your own preset is much easier to write a plug-in.

  

  Here's what a raw 24 MP image added to a timeline with a bad TV applied and adjusted a bit then duplicated enhanced, scaling slightly and cut into pieces a pre-comp with curves and Fractal noise Fractal noise apply used as matte looks like. Maybe this will give you some ideas.

  

  You can adjust the fractal demo to get any desired size mattes, and then animate the fractal or use posterize time to blow the mattes around the screen. It's just a matter of layers.

  

• No digital noise on amp «dv7-1270 ca»

  for some reason im unable to get a digital signal (DOLBY DIGITAL) (DTS) to my amp when playing movies... don't know what to do...

  Just so you know im using a HDMI cable to my amp (onkyo) all the amp never watch is (pcm multich, hdmi)

  Download CyberLink PowerDVD which should solve your problem... Let me know if it works for you...

• Does anyone have a work around for the design on PowerMac G5 2005 flaw that causes noise interference on the outputs? (Audiophile, sound engineer)

  OK, here's my problem - I have a set of audio interface Protools Digi 002 via Firewire 400 on a PowerMac G5 I was lucky enough to be given last year. I finally managed to connect my home recording studio system, he wire of mixer etc, but when I listen to the music coming from the outputs of the Digi 002 there in a great cacophony of audio interference, so much and so well, when I mount the system I can move my pointer between two monitors and it plays a different frequency of buzz. Everytime I open a window, Soft etc it is more electronic noise.

  He took a while to limit, but after reading this excerpt from wikipedia, it seems that it was a fault common to this particular model until Apple released the revised version of the B of the G5 (?);

  ' The first versions of the dual processor G5 have problems of noise . The first is ground loop- based interference,^[5] that sometimes causes noise seeps into the outputs audio analogue. This bug has been fixed in Rev. B G5.'

  and

  ' Well that the noise problems do not prevent computers affected work, they asked problems for audio professionals and enthusiasts as well, especially for models to liquid cooling, which had been expressly designed as mechanically quiet for listeners. "

  Well, that's no euphemism - in fact it makes the mac completely useless for my needs, I need the outputs clean digital noise to send for outboard effects/EQ/etc.

  As it was a common fault, I was hoping someone might be able to shed some light on a workaround solution, as I can't imagine recording ground studios just stop until this has been fixed by releasing a new G5?

  The only idea that I came up with so far is to buy a transformer of isolation, but I'm not entirely convinced that will solve the problem?

  Any help on this would be greatly appreciated!

  Thanks in advance

  Have you tried CHUD Tools & turn off NAP mode?

  The first versions of the dual processor G5 have problems of noise . The first is ground loop- based interference,^[5] , which causes sometimes analog audio output sound leaks. This bug has been fixed in Rev. B G5.

  The second problem of noise came from his "tweets", which can be triggered by power fluctuations. For example, display or hide the Dock makes a short beep. Many blamed the power supply used in the G5 as the cause, but this theory has never been confirmed. A very effective workaround is to disable microprocessors 'siesta' using Apple CHUD Tools, but this was not recommended by Apple. This noise problem has not set until the generation of dual-core G5s was produced, but it does not affect the model of "Late 2004" (at least there have never been reports). Draw of power fluctuation has been later attributed to the lack of power management features in processors simple heart. ^[6] Apple eventually posted information bug tweets on its support site. ^[7]

  Although noise problems did not prevent the computers assigned to work, they were problematic for audio professionals and enthusiasts as well, especially for models with cooling liquid, which had been expressly designed as mechanically quiet for listeners.

  https://en.Wikipedia.org/wiki/Power_Mac_G5

  Just one last note on the use of CHUD tools to disable the 'Nap' on the G5 Dual functionality: restart your machine reactive 'Nap '. You may have already seen this on the Apple forums. Kind of a bummer - although I rarely shut down my machine. In any case, running with 'Nap' off today seems to have resulted in a significant increase in general speed/responsiveness for me (I'm still running the stock 512 MB RAM, with another 1 GB on the way).

  «Matthew S.»

  http://www.xlr8yourmac.com/G5/G5_noise_tips.html

• Question on how to choose the tensions to describe VEE 6 pulses of 0-10-10-15 0 0 1 s 0

  Hi all,

  I want to use AWR to simulate some CSOS COLPITTS BJT, hspice codes and I want to put the circuit on AWR and run it and see what happens?  Everything goes well, but one I'm confused, it's VEE 6-10-15 0 0 1 0 s 0-10 PULSES.  Can someone tell me what I need to do?  Thanks in advance.

  Here's the code.

  BJT COLPITTS CSOS, *.

  . TRAN 10U 9.3U 15N-15N

  *. TRAN 15N 3U

  *. PLOT TRAN V (3,1)

  . PLOT TRAN V (2) I (VC1)

  . FOUR 3.39MEGHZ V (2)

  1 0 1 R1

  3 1 9 MOD1 T1

  VC1 2 9 0

  4 0 10 SCR

  RL 4 2 750

  * RL 4 2 2.6 K

  C1 2 3 500 P

  C2 4 3 4500 P

  4 2 5UH L1

  RE 3 6 K OF 4.65

  VEE 6 PULSE 0-10-15-10 0 0 0 1 S

  . MODEL MOD1 NPN IS = 1E-16 BF = 100 RC = 10

  . OPTIONS LIMPTS = 5000

  . OPTIONS RELTOL = 1E-6 ITL5 = 0

  . WIDTH OUT = 80

  . PROBE

  . END

  ryanawr is correct.  Apparently, the negative supply VEE is supposed to be - 10Vdc.  The pulse is set up to pass this supply voltage-15V - 10 time = 0 and THEN hold it steady for a longer period than the duration of the analysis.  Change suddenly introduced a stimulus to start the oscillation.  You may be able to use a DC_V instead of the pulse 10V source: in some cases, digital noise in time = 0 DC solution will begin the swing.  I guess that you establish the schema corresponding to this netlist in AWR Design environment.  If so, when you set up your blood pressure, check if you can affect the Simulator transitional APLAC.  To set the duration of the simulation and the step (similar to line of TRAN), right click on the schema > Options > APLAC Sim tab > transitional Options > uncheck the box use by default the project and use HB parametersand value stop time 10us and duration of step of 15ns.

  If you do not need to use a pulse source, use the AC_V element and the value = impulse Signal.  Good luck.

• 9401 counting by quadrature encoder error

  I use a 9401 module in a chassis 9188 to measure the position of a tree in 1E6 County/rev. The signal is an AQuadB emulated from an AKD Kollmorgen servo drive. My problem is that when the player is turned on, the noise it makes picked up as very positive figures by the 9401. The player has outputs RS485 but my cable length is short and well armored, so I thought it would work very well. It is wired like this:

  9401 CTR1 channel

  A +: 9401 pin 20

  B +: 9401 pin 23

  GND: 9401 commune

  The cable shield: 9401 commune

  Is this product because the encoder signal is differential, or is my bet to the ground/shield OK? If I disable the encoder entirely the 9401 picks up a zero solid. Should I use a kind of RS485 converter to TTL?

  In addition to the advice of John to help protect against digital noise, I also recommend that it would be a good idea to convert the differential asymmetric TTL formally.  I had opportunities in the past where I had an ambivalent connection channel differential encoder of 5V to a DAQ card and often, it would work properly.  But there have also been moments where differential signals (-) were trying to drift over the other while being tied to the digital earth common DAQ, causing sporadic but strange counting behaviors.  At least that's the diagnosis I'm come up with at the time.

  These questions disappeared immediately and permanently after putting in a differential to the TTL converter.  Here is a link to the productI used (and then successfully reused on the following projects).  Just check the specifications of your particular differential signals compared to what this product is to spec'ed to manage.

  -Kevin P

• What are the data for the PXI-6552-invalid range

  Hello

  Let say, I put the voltage custom for the PXI-6552 module

  2.4V - high level

  0.6V - low level

  Then, on canal0, I provide a signal of

  sample

  3V 0

  1 3V

  2 VOL. 2

  3-0V

  Thus, the sample 0.1 is high. Example 3 is Low.How sample 2? Please notify. Thanks in advance.

  Hi Engwei,

  Programmed tensions are the levels that you would have to exceed or down before a change of digital status is saved. This means that in your example, coming from a high level of 3V goes to 2V, the Analyzer signals would still record a strong logic. The deadband is actually a way to filter digital noise, common to the majority of the architecture of digital input.

  Best regards
  The Ilana Joshua
  Applications Engineer OR

• Any movement at all and the G9X photos are blurred in AUTO

  Present children shot inside opening in mode AUTO and their hands/arms are blurred with only a small amount of movement. Disappointed because I thought that the car is stupid proof lol. Should I be using a different setting? Help?

  Children indoor sun light and mobile. A difficult combo to the Auto setting.  Try setting sport or 'children and pets' If you want to try it on a pre-fab framework. May or may not work.

  I would like to put the camera in Tv mode.  TV is (unintuitively) what Nikon and others call "S", because it means "shutter priority". Canon meant Tv suggest "variable time".  You set the shutter speed (variable time) required to stop motion blur. For children just open packaging, I think only 1/250 or 1/320th is enough speed.  Use not TOO fast a shutter speed, because that will force the camera to compensate for the brief exposure of ISO, hiking time each hike in ISO adds ugly digital noise, and it reduces the resolution and detail of the sensor will capture.

  I would also to the shooting in RAW rather than JPG.  It will take you to do post-processing to perforate the dull RAW image up to saturation, contrast, etc., as well as to convert RAW to JPG at the end.  It is worth, however, that you can fix a RAW image much more that you can fix a JPG image. You can remove the noise much more RAW, and you can fix everything better, including balance exposure and white.

  Watch a few videos free tutorial on Google on the "exposure Triangle".  He explained very simply the key principle of photography, the three variables you manipulate to get correct exposure: shutter speed, Aperture and ISO sensitivity. You can also negotiate one against the other to get artistic results.

  Good luck.

• compatibility of Nexus 5 with MDR-NC31EM

  I have a nexus 5. now I would like to purchace Digital Noise Cancelling Headphones MDR-NC31EM. I know that nexus 5 a 5 pin 3.5 mm jack, but I don't know that it is enabled in kernel or operating system level. so, I would like to confirm if the MDR-NC31EM works perfectly with the nexus 5 before you actually buy it. TQ

  The noise cancellation is a sony proprietary software and is unlikely to be supported in other devices from manufacturers.
  I think the 5th pole is for another purpose in the nexus program 5

• * Easy *, most different/vast music program?

  	12 September, 2009 @ 00:32
  Hey guys im in need of a program to use to make remixes of some of my favorite pieces, which have no words and come from the music of movies or video game soundtracks. People told me to use programs such as FL studio (learn to use in the demo) and others such as Magix music maker and more... Now I have need to know (if possible) the music of top 5 or 3 best programs out there. And yes I am willing to spend hundreds of dollars if you need be.* * Im ONLY looking for programs that allow you to make your own music using a roll of piano or any other manufacturer of melody I know not how to read music of any kind. So far I'm studio FL taste, its got a bit of a learning curve, but has similar to first Adobe princibles (im familiar with), while the MAgix music maker demo has not left much to be desired. If I learn how to use reference to u program wutever I want to know how many different instruments and sounds choirish are included, OR if I have to buy additional sound beams. The kind of music I hope create uses many different instruments of the Orchestra, a few electric guitars for atmosphere, sounds electronica Atmos more and a lot of choir as singing. PLEASE LISTEN * here are links to some youtube videos with songs that are very similar to that which I hope create, it also would be great if I can be told whether or not these programs to be mentioned will be powerful enuff to replicate those tunes. Listen to them, they will help you at + great songs out there. ^ The Legend of Zelda: Ocarina of Time, Temple of the spirit: (demonstrated the unique instruments and electronic sounds, I want to implement) http://www.YouTube.com/watch?v=Z-jT6T59rYw Metroid Prime 2 Echoes. Submerged Temple (shown noise types and electronic instruments) http://www.YouTube.com/watch?v=tpbhuYynxvw Halo: Ghost of Reach (demonstrated the heavy drum beats and choral singing, I hope to be able to implement): http://www.YouTube.com/watch?v=Fa306R6JaHA I hope to do more songs similar to the work of John Williams, howard Shore and Hanz zimmer, but they consist of typical imstruments Orchestra th, I hope that these programs include. So there you have it... thats the music a bit I hope to... all I need is the program... What is the best bang for your money, the easiest to use, sound library more and more diverse, and if it is powerful enuff to make songs like those... Pleeeeeez help me with this... I posted several of these questions on the multiple sites QnA and ppl give answers like "try Fruity loops or this n this program." IM VERY new to this... I don't really know the first thing about makin music... lol I know there are remixes and songs in my head I have TO do. And btw these examples I provided, please listen to them, they show the SPECIFIC music type I want to do, down to the chorus and everything. (where I could find the kind of instruments used to make these songs for download would be great too). Please guys, im hoping this is my last post on this issue. Troubleshoot a bro? Thanks a guy TONE, to help with this will be greatly appreciated -Nate aka Jussumdude

  Have you tried a more appropriate forum for your questions?

  Musical composition and performance interfaces
  http://createdigitalnoise.com/viewforum.php?f=5

  Digital noise 'create' a community for musicians and visual artists using digital technology
  http://createdigitalnoise.com/index.php?sid=22376167f0773d5877a8df488d4b3515

• Accessories Z2

  z2 Digital Noise Cancelling Headphones MDR-NC31EM is at the base with the z2 phone or should I buy it?
  because I just bought my z2 before yesterday and the headphones that came with it was not the Digital Noise Cancelling ones
  and when I bought the phone it was sealed by the warranty and the warranty name Delta and I live in Egypt
  so please tell me what to do because one of the main reasons I bought the phone is the characteristic sound and it won't work on any helmet only Digital Noise Cancelling Headphones MDR-NC31EM

  I hope you answer as soon as Possible

  I hope this write-up explains the technology behind it...

  www.phonearena.com/news/The-Sony-Xperia-Z2-comes-with-built-in-active-noise-cancellation.-Here-is-ho...

• Windows 7 drivers Acer AO751h unusable in Windows 8 - Metro GUI mess

  I am updating our Acer netbooks (ZA3 / AO751h) to Windows 8.

  The default Microsoft driver does not recognize the resolution of 1366 x 768. Please add this resolution to the driver of stock.

  
  I tried to install the driver of Windows 7 by Acer in compatibility mode, but it all works in desktop mode it's completely unusable Metro user interface. All icons are turning to high digital noise.

  Please correct.

  It is not Microsoft to produce a pilot. Intel are primarily responsible for and they spend on the Acer driver who then make himself available.

  The Intel GMA 500 will not get taken in charge without Intel do something, and it is unlikely that the GMA 500 seems to be an abandoned product...