No disc in the drive - no. disc, 'there is no disk in the drive. Insert a disk in drive \Device\Harddisk1\DR1

Similar Questions

• How to remove the error message there is no disc the disc in the Drive\Device\Harddisk1\DR1

  There is an error message which keeps popping up and I push to cancel several times before it will go away however he comes back to the top on my screen at random times. Meesage hpqtra08.exe - no disc, then below it reads "he not there no disc insert disc in the Drive\Device\Harddisk1\DR1.
  Please help me to remove it from my computer!

  Hello lala80,

  Thank you for using Microsoft Vista answers Forum!

  hpqtra08.exe is normally installed as part of the HP all-in-one printer, scanner, driver copy and install the software. It is a non-essential process, and it is at the discretion of the user, whether to disable. If disabled buttons as scan in the 'all-in-one' continues to work. However if you never use it it is safe to disable. It does not work, just the button scan in the multi functional.

  You can disable this feature by using msconfig in Windows.

  Click Start and type msconfig in the search box and press enter

  Click the Start (top row)

  In the list of programs, uncheck hpqtra08.exe

  If please reply and let us know if your problem is resolved or if you need more help

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• SE error message: there is no disc in the drive. Insert a disk in drive \Device\Harddisk1\DR1

  Original title: CMD. EXE - NO DISK

  I use Windows Vista Home Premium 64

  I get a pop box which reads:

  cmd.exe - disc no.

  There is no disk in the drive. Insert a disk in drive \Device\Harddisk1\DR1

  It appears each time I try and do anything. It gives me 3 options "Cancel, try again, continue»

  If you click over there enough he goes, then pop up when you try to do something else.

  I tried to run Norton (without success), Spyware remover tools (Adware - without success)

  Any help would be appreciated.

  Hi angelover08,

  1. have you tried to change the drive letters of removable disks?

  If this isn't the case, you can try to change the drive letter designated to removable drives all the other letters other than E, F, G and check if it helps.

  Check out the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error: "regsvr.exe - no disk there is no disk in the drive." Insert a disk into drive\Device\Harddisk1\DR1 "_".

  Original title: regsvr.exe - disc no.

  Hello

  I get an error message whenever I insert my pen drive or memory card in my laptop. The error message is "regsvr.exe - no disk there is no disk in the drive." Insert a disk in the drive\Device\Harddisk1\DR1. There are only three options - Cancel, Try Again and continue. None of them works. I have to manually stop the system to get rid of it. Please help me get rid of this error message for always. Your response to this regard will be highly appreciated. Cordially Sashwat

  Hello, Sashwat

  If possible, test the drive in another computer and check if you are able to access or not. If this is not the case, the drive may be bad.

  If it's a USB card with an SD card reader, rather than a dedicated, flash drive check if the card is recognized and accessible in other drives/devices. Also, check the metal contacts on the card to make sure that nothing is blocking the metal contacts. If the card cannot be read in other devices and contacts are clean, the card is likely bad.
  If other devices can access the drive, but not by the card reader, the card reader could be bad.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Starting problems, get the error "there is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR1.

  1st problem: yesterday I started getting a popp window with the text following formulation - "there is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR1' I have no idea what this introduced him or how stop it.  Any suggestions?

  2nd problem: whenever I restart my computer or shut it down and then power up the white bar that moves from left to right only moving to halfway through and then stops. I then have to hold the power button in until the computer turns off again and then rehit the power button. When it starts to power back up the white bar is always in the Middle, but then begins to finally complete the passage to the far right of the box. This problem started when I loaded the software for my printer Canon MX870 new that I bought and installed in October 2010 and has been done since then. I removed and reloaded the software of the printer on three different occasions but the problem persists.

  Hi frankb911,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/there-is-no-disk-in-the-drive-please-insert-a-disk/b9a130b2-4261-4385-a51f-28005f209a1d

  I hope this helps!

• Winlogon.exe guard popping up saying 'No disc' there is no disk in the drive. Insert a disc into drive K

  Winlogon.exe guard popping up saying 'No disc' there is no disk in the drive. Insert a disc into drive K. I won't record anything. It keeps popping up when I want to stop and he let me close. And it won't go away. I tried the Task Manager, and who is unable to complete the task. I went to his file and tried to delete, but it's not going to get out me of my PC

  Hello

  1. what version of operating system you are using?
  2. did you of recent changes on your system prior to this problem?
  3. when, exactly, you get this error message?

  You can try the steps mentioned below and check if it helps to solve the problem.

  Method 1: Scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Method 2: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Method 3: If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• «There is no disk in the drive.please insert a disc in the drive \Device\Harddisk1\DR4.»

  Hi all!

  When I try to install AVG on my WINDOWS XP SP2, a message is displayed with Titile "scvhost.exe - no disk" and the body of the message said that "there is no disk in the drive. Insert a disc into drive \Device\Harddisk1\DR4.

  attachment: -.

  http://i51.Tinypic.com/6zoaoo.gif

  or

  

  Please help me as soon as possible!

  Thank you very much!

  Post in the forums of users AVG.

• Acrobat.exe - no disc. There is no disk in the drive. Please insert a disk into drive \Device\Harddisk\DR1.

  I have Windows 7 Professional in my office. I get this error permanently on my PC.

  "Acrobat.exe - no disc. There is no disk in the drive. Insert a disc into drive \Device\Harddisk\DR1 ".
  I reinstalled Adobe Acrobat X. error message is yet to come again and again after a short interval.

  I have Windows 7 Professional in my office. I get this error permanently on my PC.

  "Acrobat.exe - no disc. There is no disk in the drive. Insert a disc into drive \Device\Harddisk\DR1 ".

  I reinstalled Adobe Acrobat X. error message is yet to come again and again after a short interval.

  I had the same error today and found the answer to my question.  Acrobat attempts to retrieve a file on a removable disk, which is no longer present.  In my case, it's an SD card.  I reinserted the card in the reader and acrobat then asked if I wanted to recover the file, to which I said no. Acrobat no longer shows the message at startup.

• Svchost.exe - No. disc there is no disk in the drive. Please insert a disk in to drive\Device\Harddisk1\DR5

  When I'm inserting an internet data card into my USB its error message indicating that svchost.exe - disc no. there is no disc in the drive. Please insert a disk into drive\Device\Harddisk1\DR5 Cancel, continue tryagain all option does not work its new popuping outside. :(pouvait point de restauration système peut aider?) or is it a problem with the virus please help.

  Hello

  1 did you change on your computer?

  2 what other USB devices are detected on the computer?

  Try connecting to another USB port and verify.

  Connect the card to internet data to another computer and check if works

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx WARNING: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate

• The driver has detected an error of the controller on \Device\Harddisk1\DR1. What is the cause?

  I get this message on 7 11 windows event log IDs ' driver has detected an error in the controller on \Device\Harddisk1\DR1. "" The message keeps poping up when ever I insert my usb memory key but the DR number changes when I swap beetwhen and other memory usm drives exmp usb ports. "The driver has detected an error of the controller on \Device\Harddisk1\DR3." otherwise, my system is runnig perfect.

  Hello

  Check the drive for errors and see if it works fine it after.
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
  The link above includes steps for the same.
   $C God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

• event ID #51, an error was detected on device \Device\Harddisk1\DR1 during a paging operation. ; Session "ReadyBoot" stopped because of the following error: 0xC0000188

  2 weeks ago I started to do, the driver has detected an error on \Device\Ide\IdePort0 controller, an error was detected on device \Device\Harddisk1\DR1 during a paging operation. ; Session "ReadyBoot" stopped because of the following error: 0xC000018. Event ID #51, #11 bottom line I check the disc, I restarted computer sometimes the logical disks and primary transmission is up to leave after a certain time.  About 6 months ago I bought a new car because I had the same problem.  I had checked, adjustment, cables, power, bios, software update settings, BIOS and decided he could be the player.  I used manufacturing software troubleshooting - the drive past all the test.  I used the S.M.A.R.T. test - it past.  As I said I check disk found nothing.  However, I deleted and brought another drive.  Now, I get the same indications listed above.

  Hi Robert,.

  I'm glad that you posted the request in the Microsoft community. If I understand correctly, you get an error message indicating boost loan session interrupted because of an error.

  Here is an article that talks about the error you are getting. Go through it and check.

  Here is an article on Ready Boost. Have a look at.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• The device, \Device\Harddisk1\DR1, has a bad block.

  Hello world

  After scanning FAT/FAT32/NTFS partition with the attempt to recover bad sectors, the system marks all free clusters as bad.
  The event log is then filled with error messages "the device, \Device\Harddisk1\DR1, has a bad block.".

  Hard drive is 100% healthy. I bought three weeks ago.  I am 100% sure that there no erros surface, because I tested with Seagate SeaTool and HD tune Pro.

  I tested it on three computers different windows 7 and I still got the same error.
  CnMemory support won't accept as an error, they say that it is the problem of Microsoft Windows 7.

  Here is one video.

  Some info:
  My OS = Windows 7 x 64, with all updates until the 2013.03.29.
  Product name = "CnMemory Spaceloop 3 TB USB 2.0 sata external drive»
  Inside of the box is Seagate ST3000DM001 SATA 3 TB hard drive with 4 k sector.

  Thanks for the help,
  Eduard

  Hi Edward,

  Welcome to the Microsoft Community Forums.

  It seems that the system marks all free clusters as bad and the event log registered as "the device, \Device\Harddisk1\DR1, has a bad block. We will analyze and identify the cause of the problem.

  Perform the steps:

  Method 1:

  Queries or sets the bit of impurity of a volume. When the volume dirty bit, one is set, autochk automatically checks the volume for errors the next time the computer is restarted.

  Syntax-

  fsutil dirty {query | value}
  

  Reference:

  Fsutil dirty

  http://TechNet.Microsoft.com/en-us/library/cc788091.aspx

  I would like to know the output of the following command:

  fsutil fsinfo ntfsinfo

  Method 2:

  You can run Chkdsk from WINRE.

  In order to solve this problem go chkdsk from WinRE (Windows Recovery Environment) mode and search for the issue.

  You can follow these steps to run CHKDSK:

  a. use the Windows 7 DVD to start the computer from Windows Recovery (WinRE).

  b. in WinRE, open a command prompt. To do this, follow these steps:

  c. on the screen to install Windows, select the language to install, time and currency format and keyboard or input method options and then click Next.

  d. click on repair your computer.

  e. click on the Windows 7 installation you want to repair, and then click Next.

  f. click on command prompt.

  At the command prompt, type the following command and press ENTER:

  CHKDSK drive: / p

  CHKDSK drive: / r

  CHKDSK warning:

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Hope this information helps. Get back to us if you have more queries about Windows.

• Low orshut restart error - there no disc in the drive. Insert a disk into \device\harddisk1\DR1.

  in windows 7 every time I have to reset or restart or stop this message appears.  hitting cancel about three times before I can close.  What can be wrong?

  Hello

  Thank you for contacting Microsoft Answers.

  Try to repair using the Windows Setup disc. It should solve the problem.

  If the issue is not resolved, answer here.

• Repeat the mistake of Photoscreensaver.scr: "there is no disk in the drive. Insert a disc into drive \Device\Harddisk4\DR4.

  I've looked everywhere to find a solution to this problem, but it will not go away.  the message I get is

  "There is no disk in the drive. Insert a disc into drive \Device\Harddisk4\DR4.

  I have only one hard drive installed, my C drive with a partition D of the spirit of the original plant. I would be very grateful is some has a fix for this!

  Hello

  This can happen if you have conencted some disk of the machine that has pictures and you have set up the photos in the screen saver.

  You can try to change the photo screensaver can access the registry path if it exists.

  a. Click Start, type regedit in the search box and press ENTER.

  b. navigate to the

  HKEY_CURRENT_USER\Software\Microsoft\Windows Gallery\Slideshow\Screensaver photo

  c. If the screen saver is mentioned in the settings, then on the right you will see "FolderPath".

  (d) the entry for folderpath should be C:\Users\Public\Pictures\Sample pictures

  e. If isn't changing for the above entry.

  f. exit the registry editor, restart the computer and check.

  Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Insert a disk in drive \device\harddisk5\dr5

  When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Please insert a disk into drive \device\harddisk5\dr5.
  My C: drive is my main area on the HARD disk.  The D: is the original Image. There are 5 locations of media FJ. the CD/DVD is E:. I have several USB ports, and a Magic Jack plugged into one of them..., printers, scanners, mouse and keyboard are also USB
  Are installed:
  FW MS .NET 1.1
  MRS. NST FW 3.5 sp1
  MS SQL Server 2005
  MS SQL Server 2005 compact Edition [ENU]
  MS SQL Server 2005 Native Client
  MS SQL Server Setup Support Files
  MS SQL Server VSS writer

  Here is the error log:
  [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 13: 52:01] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 13: 52:01] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11 13: 52:12] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11 13: 52:12] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 13: 52:12] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 13: 52:12] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 13: 52:12] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 13: 52:12] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [, 13: 52:12] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 13: 52:12] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 13: 52:12] VS70pgui: [2] component unknown status .NET Framework 2.0 SDK (x 64) double [14/06/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) : [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 14:34:42] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 14:34:42] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11, 14: 34:52] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11, 14: 34:52] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 14: 34:52] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 14: 34:52] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 14: 34:52] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 14: 34:52] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [14: 34:52] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 14: 34:52] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 14: 34:52] VS70pgui: [2] double status unknown component .NET Framework 2.0 SDK (x 64)

  Try to post or search the MSDN Forums

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

  http://social.msdn.Microsoft.com/forums/en-us/Vsexpressinstall/threads

  There are indications that some USB devices may cause this error. Try unplugging as much as you can.