No display after installing linux on Satellite A100

Similar Questions

• Sound problems after installing Vista on Satellite A100

  Hello

  I have something new, something I've never seen and I do not much [as appropriate] of you.

  Today, I installed Windows Vista Beta 2 on my laptop Satellite A100-192. As it is Vista compatible now [I added some memory] I think it's the right time to see the new operating system [that is great, he will rule the world for sure].

  But back to the topic.
  After the installation of Windows Vista, which has detected almost all of the software in my pc and have fun on this topic / and there are a lot of things an old fart like me, can have fun with / I decided it's time to get back to work.
  So I restarted my toshiba for win xp, started working and has decided that music will surely improve my / concentration i'm from Poland and as many of you know, my team lost the first game of the 2006 World Cup. so they will not pass the group stage of WC2K6--real cause my humor today. After turning on my foobar, I realized that I don't hear nothing/i do not drink, so he can't really be the cause. I've set all volume settings, all the settings of the sound and nothing! I tried headphone jack, but it does not work too. I tried reinstalling the drivers, reboot the system several times and... nothing.
  I went back to Vista and... sound works like a charm.

  Bromine to Vista my sound on XP...

  Anyone has any bright ideas, how this could have happened and how to solv it / accept to remove vista from windows...?

  I would be greatfull for some advice...

  Best regards
  Krystian

  Hello Krystian

  If you use recovery media supplied for installation of WXP is the noise problem persist?

• Can I install Linux in Satellite M200?

  Hi all

  I want to install Linux in Satellite M200, but I don't know it's the driver in charge or not, please give me advice.

  Thank you
  Nhanntit

  Of course, you can install Linux on the Toshiba laptop.
  BUT you won't find any driver Toshiba or tools for the Linux operating system.

  Toshiba does not support official Linux and that's why the pilots are not released.
  You will need to use the Linux drivers from chipmaker like Intel IE

  A hint; I use the Knoppix Live CD I n t need to install anything. I boot from this CD and the functional complete using Linux ca ;)

• After having cleaned my Satellite A100 display no longer works

  I opened my Satellite A100 to make sure it is clean. After opening it, I decided to close this back. After I put all the screws, and I turn on the laptop, there is no display on the screen but the mother/processor board works very well.

  Also, I reopened the laptop and checked the material and saw that near the port where you can connect a monitor, the white piece of hardware are separated, if I can connect these two back, I think I can make it work.

  Can someone help me please?

  Hello

  Looks like you have accidentally disconnected (removed) the FL inverter cable or video cable that connects the screen LCD with the jury.

  Usually it of not recommended and not recommended to disassemble the laptop if you have no experience. During this process other parts can be damaged and therefore jobs must be performed by a technician for laptop.
  I see that you have already opened the laptop and the warranty is not valid.

  It of always difficult to explain this procedure and so I goggled a bit and found this page useful:
  http://www.irisvista.com/tech/laptops/Toshiba-Satellite-A105/remove-replace-LCD-screen-1.htm

  The laptop described on the page is a Sat A105 but very similar to A100
  Good luck and be careful.

• Bluetooth not working not not after reinstalling Win XP - Satellite A100-712

  Hello

  I have a problem with my Satellite A100-712. He took BT BT worked perfectly before reinstalling windows. I reinstalled windows using the original Toshiba Recovery CD. After you have reinstalled, BT is no longer working. Monitor of BT icon does not appear. When I swicht BT on (Fn + F8 or "manual switch on the lid of the laptop) it starts installing bluetooth. But the installation progress bar stops at some point and that's all. I tried waiting etc, but nothing helped.
  You can only cancel the instalation.

  I tried several versions of BT software, but even with the original - provided on the recovery CD, it doesn't. I am attaching the screenshot. As far as I know, the problem is quite common, but I have found no satisfactory solution...

  I hope you can help me with this!

  [http://www.quickphotohost.com/uploads/8f0614e068.jpg]

  Kind regards

  Jajoos

  p. s.

  the screenshot says: installation of the BT device. Please wait...

  Hello

  You are right. The A100-712 supports Bluetooth without a doubt.
  Then you should be able to install the BT stack correctly.

  As mentioned; BT can be activated properly using FN + F8 and installation starts as well, but he does not terminate
  Hmm I'm not quite sure what could cause this but maybe his problem of m system software.
  I think it is to recover the laptop once more
  Activate BT, then check if the progress bar would begin and could complete the installation.

• M30-801-unknown device after installing XP W satellite

  After installing XP SP2 (not Toshiba) I get "Unknown device" in Device Manager.
  (I tried display, wireless, Chipset, Audio, network, Modem and other and all is well but I always get 1 "unknown device").
  Notepad is Toshiba Satellite M30-801
  I need help.

  Hi Alfio

  Please take a look here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5075

  I made a few recommendations to somebody else with a similar problem.

  Good luck

  Tom

• HP mini 110-3500: no VGA connection more after installing Linux 16.04 LTS

  Hello!

  I can't fix my VGA problem in recent weeks and your community can solve it!

  I'm new to Linux and I have installed the 16.04 LTS version in my mini HP 110-3500.

  No more and all other system inside HP program.

  Before Linux 16.04 LTS, a BENQ F93GX external VGA display was connected to my HP mini computer, but leave now "not received no signal" message appeared on it when I turn it on «»

  I've installed some utilities and drivers from here and there, does a little work, but, I always in the dark.

  Below that pop up with the commands:

  1 - lspci k | grep-iA2 VGA

  00:02.0 VGA compatible controller: Intel Corporation Atom D4xx/D5xx/N4xx/N5xx Processor Integrated Graphics Controller
  Subsystem: Hewlett-Packard Company Atom graphics processor integrated D4xx/D5xx/N4xx/N5xx Controller
  Kernel modules: i915

  2 - xrandr without connected VGA:

  xrandr: failed to get the size of gamma for failure to exit
  Screen 0: minimum 1024 x 600, current 1024 x 600, 1024 x 600 maximum
  by default connected 1024 x 600 + 0 + 0 0 x 0mm
  75.00* 1024 x 600

  3 - xrandr with VGA connected and "lit".

  xrandr: failed to get the size of gamma for failure to exit
  Screen 0: minimum 1024 x 600, current 1024 x 600, 1024 x 600 maximum
  by default connected 1024 x 600 + 0 + 0 0 x 0mm
  75.00* 1024 x 600

  I received help from other communities, but the problem still there, can you please give it a try?

  I wish you a nice day.

  Thank you

  Domng

  Hi @Domng,

  Welcome to the HP Forum!

  Thanks for joining the community of the HP Forum.  It is a great resource for information, advice and solutions that have helped others. Here is a link as a guide should you have any concerns or questions about the process:

  First time here? Learn how to post and more

  I understand that you have installed Linux and your VGA port does not work.  HP does not support Linux but supports the hardware.

  Here is a link that can help:

  HP Notebook PC - Frequently asked Questions on Linux (FAQ)

  Good luck!

  If this post has helped you solve your problem, please choose "accepted Solution"to help other members and visitors locate that information. "  To say thanks for the help, please click "Thumbs Up icon" below.

• x 360: delete the recovery partition after installing Linux

  Hello

  My x 360 laptop with 10 Windows works fine. I just installed Linux dual boot (w. Windows 10) on three new partitions. The scores are as below. E, F, G partitions are Linux.

  I have these questions please:

  1. is the recovery partition (D) no longer, now that I have partitioned the disk? (I did a recovery USB flash drive when I bought the computer)

  2. is it safe to remove the recovery partition (D)?

  3. There is also a small partition of 980 MB. What is c? Is it safe to remove?

  Thank you

  YCC

  

  Sorry, no.  You can not recover by using the HP Recovery partition after you change the partitioning scheme.

  As it is now, you might as well delete it.

  It will not hurt to remove it now because the HP Recovery works doesn'y work in any case.

  I know Macrium Reflect can backup and restore Windows and Linux distros because I have tried it, myself.

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• I am interesting to install Linux in Satellite 300 d - 22K

  Y at - it any linux distribution recommended for Satellite 300 d - 22K?

  I have two partition in C: it is the Windows operating system. normal and E: HDDRecovery. Is it possible to install linux in safe E: and HDDRevery unit in usb pen?

  Thank you.

  Just something important for you: recovery image is saved in this folder HDDRecovery. If you remove from here or change partition, you will not be able to reuse this image.

  If you want to create this DVD using "Toshiba Recovery Disc Creator' of recovery. When you have this DVD of recovery facilities, you can do what you want. Later, you can use this DVD to reinstall Vista.

  You can try to install Linux, but please note that this model of laptop is not made Linux supported.

• Cannot install VISTA on Satellite A100 graphics card driver

  Hi all

  I need help.
  I just installed Windows Vista Ultimate on my Satellite A100-326, (series PSAA9). This system has a graphics card from NVIDIA® GeForce Go 7300 with 256 MB dedicated memory that has worked very well on Windows XP MCE!
  The default graphics card driver does not work, so I downloaded the new driver for VISTA from Toshiba.
  Don't just install! I always get the following message: "the NVIDIA installer didn't find all the drivers that are compatible with your current hardware. The installation program will now stop. »
  We know what the problem might be?
  Did someone encountered the same situation?

  It's really frustrating...

  Thank you
  Jota

  Hi Jota

  Please check the different view on the same driver problem.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20479

  Try to download the driver again and see your results. Thanks ;)

• How to install bluetooth in Satellite A100-787?

  The doc that comes with Bluetooth monitor for this computer says that certain files must be present in the c:\Toshiba directory but I n t have this directory at all in my computer. I installed the BtMon2Inst.exe file (which is recommended for installing XP SP1) which seems to have installed fine but do not know if Bluetooth or not functions.

  Any idea on the steps and files needed for a correct installation?

  Bluetooth Monitor you can find on the download page of Toshiba. Search for Satellite A100 (PSAAN). Download and install Bluetooth monitor.

  According to the Instructions of facilities, you must install the Bluetooth stick and then Bluetooth Monitor. BT can be activated using the FN + F8 key combination.

• How can I get all drivers installed on the Satellite A100-784

  Hi all...

  I have a Satellite A100-784 with * basic family Vista Edition recovery disk *...
  How can I get all the drivers on my laptop? ' coz when I open the folder of drivers (in c:\toshiba) I found that the WLAN and display drivers.

  A few years ago I had satellite L20, and there was an icon of the CD in the folder of toshiba in the c: partition, when I click on it; I could burn all the drivers on a cd...

  can I got this thing in my A100?

  Thanks indeed...

  Hello

  The drivers are part of the image of Toshiba that is stored on the recovery disk.
  So, you can use the Toshiba Recovery disk if you want to reinstall the Vista operating system and all the drivers and tools of Toshiba.

  By the way; Only Toshiba drivers are also available on the European driver Toshiba page.

  Welcome them

• The Explorer does not display my SDCard on the Satellite A100-906

  Hello world...
  I have this problem which is actually when I insert an sd card in the slot of my satellite a100-906, the computer recognizes the card (I get the safe removal in the systray) but Explorer doesn't show anything.

  I installed the last flashmedia driver and sd secure module...

  Please help me...

  Have you tested with different SD cards? Or perhaps using other compatible cards?

  This problem occurs on the first day? I ask this question because A100 is not the latest model cell phone and I can't imagine this happens early on.

  Please, a little more information can just help understand the problem much better.

• Recovery Manager tries to 'recover' windows Vista after installing Linux

  Hello

  I installed linux Mint on HP EliteBook 6930p friend that has Recovery Manager on him. Linux works fine, but after choosing Vista in the bootmanager, it starts normally at first but then straight to the Recovery Manager, who wants to restore factory settings. Of course, we want to keep the current settings, how do we disable the Recovery Manager?

  Thank you in advance and the best,

  Steve

  lifesayko wrote:
  

  Hello

  I installed linux Mint on HP EliteBook 6930p friend that has Recovery Manager on him. Linux works fine, but after choosing Vista in the bootmanager, it starts normally at first but then straight to the Recovery Manager, who wants to restore factory settings. Of course, we want to keep the current settings, how do we disable the Recovery Manager?

  Thank you in advance and the best,

  Steve

  I suggest you make a set of HP recovery disks or USB recovery media before deleting access recovery.

  Deactiviating Recovery Manager is too easy.

  Remove the recovery partition.

  Are you sure you want to do this? Activation, it is much more difficult.

  I hope that you advise your friend aware of the consequences of the removal of the partition.

  Why not run a live version of Linux Mint from a USB key instead?

  Best regards
  ERICO

  
  

• HARD drive click after update Bios on Satellite A100

  Hello.
  I just did a bios update for my Satellite A100 PSAA9, and after that I started to hear a few clicks on the hard drive, from time to time. They appear very often, but I would like to know why they started!

  The bios update was published in 26/11/2007.
  Does anyone have the same problem?

  Thank you.

  I put t think it has something to do with the BIOS update.
  I put t don't know how old you HDD is but maybe that click concern only the HARD drive hardware problem

  There are several times in my HARD disk created similar clique and sounds but it s runs great
  I didn't noticed any hardware problem however, we cannot exclude a hardware problem and therefore, you should back up important data to prevent the files from damage.

  Best regards