No display in the system tray

Similar Questions

• my computer has two network icons, 1394 and con LAN. Either, especially the icon of LAN began to move to items being passed in the system tray when I start the computer.

  I have a new and strange behavior on my computer. Until recently, the two icons, 1394 connection and LAN icons always used to appear in the whole system tray after the computer has been started. Is no longer the case. Whenever I start the computer, I don't see the icon of LAN but discover that it attributed to items passed. Then I open the properties of the network connection, uncheck 'Show the icon in the system tray', click Apply + OK, then I open the properties, check the box again, click Apply + OK; only the LAN icon is displayed in the system tray. I'd appreciate any help with this problem. The situation is sometimes the reverse case, i.e., LAN icon appears in the system tray, but I find the icon to connect 1394 points ago. I put the properties in the Start Menu, the toolbar always showed.

  Hi ErhanKarabekir,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  Refer to the article below and try the steps mentioned, check if it helps.

  How to troubleshoot missing network connections icons in Windows Server 2003 and Windows XP

  http://support.Microsoft.com/kb/825826

  Method 2

  If the previous step fails to them it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Satellite1900 dull display at startup of the system + lack of functions in the system tray

  Satellite 1900-803 OS - XP - Home (SP2) has developed an error at startup, it starts, but has the matte screen (the equivalent of the lowest screen brightness setting) and a few icons missing in the system tray in the task bar, (ie. icon remove a security device, mousepad icon & hide the unused icon button), only fix I found is to do a system restore , that everything returns to normal, icons etc, restored once the screen not more problems occur even after hibernation, (restore point should be a point of automatic system generated manually created)

  Have you checked the drivers to display, bios updates, control panel in utilities to display etc., all seem correct and up-to-date, can anyone help, I checked the forums but not found anything similar, I checked, the reset screen FL inverter connections, but no change, dysfunction on AC or battery.
  suspect a software problem? BIOS problem?
  machine is 4 years old, and no real probs so far a complete system don't have reinstall (to the iradicate virus that I couldn't get rid of all ok after that, enough compatent during the disassembly of the machine and basic repairs but depths of software are becoming my cleats of knowhow:D about 1 year ago
  any help would be received with gratitude
  concerning
  Iain

  Hello

  I read a few topics on missing icons in the system tray. It seems that it s is a windows bug.
  Please check these messages from the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14392
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15065

  Maybe it helps.

  I can t say too much on the matte screen. Of course, if the Fl inverter is dead the display appears dull but you issue sounds a little different. The problem doesn't persist all time. That's why I think that it s not a frequency inverter. Usually, the Toshiba power saver is responsible for the brightness of the screen. You should check the settings of the single power supply modes. Maybe you switched between different modes of energy and the brightness of the screen has also been changed.

• How to enable display of the State of the network in the system tray?

  How to enable display of the State of the network in the system tray?

  Hi barta75,

  Thanks for posting in the Microsoft Community. It seems that you have a problem with the display of the status of the network (on the system tray) on the computer. This can be very frustrating for you, and I appreciate the efforts you have put in. Let us work together as a team to get this number fixed.

  We start with a few questions-

  (1) you have the network on the system tray icon?

  (2) have you made changes on the computer?

  I would like more information about the issue.

  Method 1-

  I wish that you hover the mouse over the network icon and check the status of the network.

  Method 2-

  I would have you look at the article-

  Networking

  http://Windows.Microsoft.com/en-in/Windows7/products/features/networking

  Notifications and Notification area (Windows)

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/ee330740 (v = vs. 85) .aspx

  In addition, see the article-

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242#top

  We know if you need help. We will be happy to help you.

  Thank you.

• NB200 - Notifications in the system tray area

  Every few seconds I get an annoying popup notification in the system tray area that informs me of the 'blocked events' these are events all IPv4 TCP or UDP. I really want to turn off these notifications, but despite a vast internet searching I can't find out how to do this. I tried the Action Center and tried the obvious firewall settings, but nothing will stop them. I find them very boring.

  I have a 12W NB200 running Windows 7 Home Prmium (a recent update from Windows 7 Starter Edition). -the problem occurs in both versions. Initially, I used installed but uninstalled McAfee security suite and am using 2009 F-secure Internet security suite for which I have a valid license.
  The system is connected wireless to my BT Home hub router and is connected through the homegroup for two PC. The other two computers are connected through ethernet cables to the router and both run on Windows 7 Home Premium with Avira internet security. I don't get the pop-ups on these machines.

  Any help would be greatly appreciated

  AE

  Which program generates alerts - are you sure its f-secure or would it be the widows firewall or mcafee? I don't know anything about f-secure (other than I couldn't find a manual 2009 on their website), but I would say that it will keep a diary of events and when you get close to the 'variant' that appears (and I expect clears) you will also find an option on the display of the event.

  Re my comment about this program is-are you happy that you have removed any trace of mcafee? Have you run msconfig and looked at the services and startup for any trace tabs? Also look in the Manager of tasks for all traces: in the services tab, click description to sort and search for mcafee from the similar description in the process but I think that you would have never had 1 entry of mcafee.

  I think that this should have been the first para. Have you created/modified the firewall rules? The log file must provide the ip address of the event source and which is in the range of ip addresses of your network domestic? and since you are a bt customer internet you have a bt vision pvr and who is the source?

  Post edited by: peterk_1

• Update icon is missing from the system tray

  Salvation Windows XP experts,

  My "Automatic Updates" is set on "download updates for me, but let me choose when to install them", but several times I don't get the icon in the system tray, and it is until I want to shud down my laptop when I get the message "click on disable to install important updates and turn off your computer. , and if I work on the batteries, I don't even get this message. Sometimes I change my setting "Notify Me but don't automatically download or install" hoping that icon will appear, but it's not.

  Recently, I have been informed of the 2 updates to download and agreed, but they got downloaded the icon has disappeared... and when I lock my PC, I got this message because I have new updates have been installed, I clicked on the button "turn off". I was surprised when I saw him on the screen saying 1 of 1 updates is being intalled! I pressed the power button until it exploded and then restarted, it, went into the folder Windows to know he was installing the single update, is not one of the 2 updates that I accepted on! What a f * ing system?

  What can I do to see what updates will be installed on my PC?

  Thank you

  z

  Hello

  If I understand well, you have a little problem with the 'automatic update' - in particular with the notification in the system tray icon. The icon does not appear in the system status bar when updates are ready for instalation - does?

  There is a similar but opposite problem - system "Auto update" displays the icon in the system tray – as they may be new updates installed, but the updated window does not update after clicking on the icon in the system tray:

  http://www.eggheadcafe.com/Microsoft/Windows-Update/29682120/Automatic-Update-icon-stay-on-system-tray.aspx

  So, this has been resolved by removing the "C:\Windows\SoftwareDistribution" directory "C:\WINDOWS" folder

  (before deletion was stopped the service "Windows update").

  What you can try:

  (1) this Fix IT (full reset Windows Update components - including registration of libraries, to rename files ...)

  http://support.Microsoft.com/kb/971058/en

  2) install the latest version of the Windows Update Agent (for good communication with the WWW of Windows update server)

  http://support.Microsoft.com/kb/949104/en

  3) only recommend - install the latest IE (IE8) (Select language)

  http://www.Microsoft.com/download/en/details.aspx?ID=43

  (4) this Microsoft Genuine Advantage diagnostic (I hope that will be the pages of the SITE in English)

  http://www.Microsoft.com/genuine/diag/

  enable to download ActiveX and validate windows

  I confess that I have not read previous answers (PA bear MS MVP) in detail, it is possible that you've already tried this. However, I tried this, if I had similar problems.

  LC

• Volume icon missing from the system tray

  Original title: 'LOST' ICON

  I've lost the 'speaker' icon which is usually at the bottom of my screen that allows me to adjust the volume on my PC.  How can I get the icon back?

  Hello

  Thanks for posting the question on the Microsoft Community.

  I understand that the Volume of the system tray icon is missing. I would certainly help you to fix this problem.

  I suggest to perform the steps of troubleshooting of these links and then see if the Volume icon appears in the system tray.

  Volume icon is not displayed in the notification area, and you may receive an error message when you try to add

  How to display the Volume icon in the Notification area in Windows

  I hope this helps you make the Volume icon on the system tray. If the problem persists or if you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.

• Power Guard icon repeatedly disappear from the system tray

  Original title: WINXP Pro s ver.2002 / SP3.

  I have WINXP Pro s ver.2002 / SP3.  The power icon keep disappearing several times from the system tray?  I have restore but when I restart the laptop, they're gone. This also occurs in the Volume icon at the same time. Do not remember what has been loaded or were able to do.  This fine all worked until the day. Now I have to live with almost a one-time problem by sinister using the sound properties and uncheck, Power Options apply and then check, apply the box "Show icon in the taskbar".  I tried some fixes automatic Microsoft (I think) Web site but no real chance in the long term.

  Hi JayBregand,

  ·         Did you do changes on the computer before the show?

  ·         Who are the automatic patches from Microsoft have you tried?

  Follow the suggestions below for a possible solution:

  Method 1: Try to add the icon again and the Coachman. If the problem persists you can read the following article and check.

  Volume icon is not displayed in the notification area, and you may receive an error message when you try to add

   http://support.Microsoft.com/kb/319095

   

  Method 2: Create a new profile on the computer and check if the problem persists. If this is not the case, the other profile is corrupt. To create a new user profile, you can see the article mentioned below for the procedure.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

   

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

  Let us know if that helps.

• Update of security continues to show the shield yellow in the system tray after installation twice and restarted (KB972270 & KB982132)

  Update of security continues to display the shield yellow in the system tray after installation twice and restarted (KB972270 & KB982132).

  YES, thank you! I had installed the most recent Fixit! Just ran disable it Fixit, rebooted, ran the update again and YAY no more yellow shield! Thank you!

  Then, less than a minute later, you posted...

  Thank you, this "fixed"! Ran the Fixit to disable, then ran update again and the yellow shield has not disappeared.

  That one I'm supposed to believe?

• Network notification in the system tray is disabled, how can I activate this new?

  The network notification icon is disabled on the system tray, off after Microsoft.how system update I reactivate?

  Hello

  There are different ways to fix it

  read all the information on the link below

  Try Method 1 or 3

  Method 1. :

  1. right click on the taskbar and click Properties.

  2 tab Area of Notification .

  3 check the (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area

  Method of reading 3 etc. in the link below

  How to enable or disable the Notification area system icons in Vista

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

• volume control disappeared from the system tray and will not let me add in the Properties menu

  The volume control has disappeared from the system tray, when I open the Properties menu, it won't allow me to check the box to display the volume control

  Hello

  As method 1 is not available, try Method 3 in the link:

  "How to activate or disable the Notification area system icons in Vista"

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can also try a system restore to before that was the problem:

  «How to make a Vista system restore»

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• How to get the system tray at the bottom of the monitor

  I found that the system tray icons had moved to the right side of the monitor. How do I get back them down

  Hello

  http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar

  Unlock and move the taskbar

  Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.

  Taskbar

  View all

  To unlock the taskbar

  • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

    

    Note

    To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

  To move the taskbar

  • Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

• In Windows 7, icons in the system tray / notification look area low resolution

  Here's a screenshot of my notification area / system tray (whatever it's called now) flying:

  http://Localhostr.com/file/UcvYfuW/Bilderman%202011.05.14%206-02-05%20AM.PNG
  As you can see, for some programs look systray icons very low resolution and just plain bad.
  I have reviewed the icon for the executable file of these programs and has determined that all of the resolutions of the icon is available (256 x 256, 48 x 48, 32 x 32, 24 x 24, 16 x 16).
  I tried to correct the problem by placing a custom in the program directory file app.ico.
  Nothing seems to work.
  The resolution of my monitor is correctly defined in the display settings.
  I talked to other users of W7 using the same programs and they report that the icons look very well for them.
  
  I'm running a fresh install of Windows 7 Ultimate on a Lenovo T60 with a 'landscape' theme Windows applied (IE no programs custom theme or something like that).
  As a result of this issue, maybe someone could tell me what use the resolution of the Windows icon in the system tray?
  Thank you

  in fact you don't have to restore your system, because maybe you have already lived a few weeks with the problem.

  It worked smoothly for me.

  -load a default theme

  -check the advanced appearance settings

  -compare the number of dimensions of each element with the decimal version of the 'size' on

  HKEY_CURRENT_USER\Control Panel\Appearance\New Schemes\Current SaveAll\Sizes\0 settings

  -There should be two numbers that do not match (for me were 21 on dialog appearance and 23 in the registry, twice).

  -Double-click on the registry value and write what you have on the dialog edit the data type decimal.

  -Repeat for the other incompatibilities

  -close the registry

  -Start the Task Manager

  -complete the process explorer.exe (Don't panic)

  -menu file, new task run explorer.exe

  -Close Task Manager

  -smile
  God bless you

• Reduce the AIR Applications to the system tray.

  Hello. Is it possible to minimize our AIR applications to the system tray? Internet Download Manager can have it's window closed but still running and appearing in the system tray, and is it also possible to display balloon messages as do some programs? Any solution even would be really useful.

  Thank you.

  Working with the dock and the system tray | Adobe Developer Connection

• message and the system tray

  What class is used to reduce an application in the system tray?
  and the display of a message in the system tray?

  It would be more a matter of related AWT of JavaFX partner. I don't know much on the system tray, but you might want to look at the documentation behind it all: http://download.oracle.com/javase/6/docs/api/java/awt/SystemTray.html

  TrayIcon classes and who probably have what you're looking for.