No display on the monitor, computer and your monitor work?
I have a few years old desktop computer with windows XP a few days back I lost all the screen. I have looked for answers on YOUTUBE, what advice to clean the Rams
I did the screen came back, but even once it is out after a few days. I can't do any screen of the monitor is turn on the computer, therefore, but not display.
Can you please help!
The first thing to try is to make sure that the cable that connects the monitor to the video card of the computer is properly connected and the screws are tight.
RAM does not usually cause no problem 'display '.
Tags: Windows
Similar Questions
-
I tried to erase and reset my iphone 6 s. But why is it taking so long? For more than 24 hours. Is this normal? The phone displays just the apple logo and wont open. Help, please. Thank you in advance.
Hello
Follow the instructions here:
If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports
-
I want to update my computer and made a Windows Easy Transfer to my new. My Firefox Favorites do not show on my new computer so I used Firefox Sync, which worked well. Now that I have the bookmarks on the new computer, I can delete the old computer and keep the bookmarks on the new.
First, unplug your old computer of Firefox Sync, so you do not accidentally delete data synchronization, but yes, you should be good to go.
-
I have all the Adobe Creative Suite with all the programs installed on my mac, I bought a new mac and go to sell the need for others, but I have to get the programs on the new computer and I also lost the serial number for it, what can I do about it?
-
Problem:
1. How can I increase the space of name display in the form, material and specification of the nutritional profile?
2. how to increase display space for the name of the sheet in the history section at the top of the screen?
Thank you
Hello Nefertari,
You try to view more characters in these areas?
Each of these locations is plugable using custom plugin extensions.
For example, you can go into extensions/config/CustomPluginExtensions file and add the following nodes under the node FormatPlugins.
I think that the default values for the sites are set to 50 characters, so I had to be up to 100 characters (note NameMaxLength = parameter in the attribute FactoryURL 100).
It will be applicable to all specifications, if you need something more specific, you will have to create your own class where you can check the type of technique.
Make your own judgment in what concerns how enough will be the look on the screen after you increase the length to a large number, but you can always control the formatting in your own class.
See this older post for more information https://community.oracle.com/thread/2562965
Is that what you're looking for?
Dmitriy
.
-
He worked on an image and then stopped on the next! I have cs6. It is just the display of the background gray and white checkerboard on the upper left corner. I click on the arrow down to see if I can get it back to black and white and it will not change... it will not change if I click on any of them. I think it might be a bug? Any ideas will be appreciated. I tried to reset them as well. Thank you!!
Check your Options bar. You have the opacity set to 10%. Easy to do. Just hit the 1 key while the gradient tool is selected, and it's done. By pressing the 0 key will take you back to 100%
-
I got a refurbished pc includes a CD of windows XP SP3, I want to use it to install windows in the other computer and I need the product key.
SP3 for xp is not the operating system, only of SP3.
To buy a cd of xp, with key retail product #.
Without this, you cannot install xp.
-
I have win 7 pro as my OS, whenever I try to install the bluetooth driver in xp mode, I get an error message saying "this software cannot be installed remotely. Please connect to the local computer, and then try again.
Check this box:
-
Lose connectivity to the virtual computer on your laptop when you are disconnected from the network
Hello
I have a laptop with a Windows 2003 virtual machine (VPC 2007) with IIS 6.0, hosting a Web site for testing and development.
Using Dreamweaver and navigation on the site of the XP laptop (VM host) works very well when the network cable is connected.
Interestingly, this will work, but VERY slowly when plugged into an empty network switch.
The virtual machine has the laptop computer adapter selected to work. I tried to use a loopback cable and it did not work. I also tried to add the MS Loopback Adapter but not had any luck with that when you set the virtual to use.
Please can I have some suggestions, laptop user wants to work on this site with the virtual machine when you are away a network connection.
Thank you
Tom
Hello
Try a static IP on the same subnet to re-branded to map of loop back on the virtual machine and the host.
Make sure that the subnet is allowed through the firewall.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
How to transfer all the parameters concerning auser as outlook mail settings of another user in the same computer and OS (win 7)
How to transfer all the parameters concerning auser as outlook mail settings of another user in the same computer and OS (win 7)
Easy Windows XP, not so easy under Windows 7. Have a look here:http://www.bluemoonpcrepair.com/WP/?p=39
-
I need to transfer the Creative Suite 6 from an old computer to a new one. I have a disc. Just disable the program on the old computer and install on the new and then save Will Adobe recognizes that I have only used a copy? I need to also install the program on a laptop.
You can use the serial number twice, Learn how to enable or disable Adobe applications
Concerning
Stéphane
-
I made a disk defrag on the guest computer and now VM won't start
Hi, I stupidly done a disk defrag on the guest computer and now VM won't start. I have attached the log files you. Please help me.
Post edited by: a.p. - the moderator Note: branched out in a new discussion
This can make things more difficult depending on the current state of the virtual machine.
What you should do at this point - unless already done--is to backup/copy of files of all VM to ensure that you have a way to go back if things don't work as expected. The next step is to find out if it is possible to free up space on the D: drive, so that the virtual machine does not have to be moved (move the files could be unnecessary snapshots). If there is enough free space on the disk, use the file attached configuration (.vmx) to replace the damaged one. Ensure that VMware Workstation or at least tab of the virtual machine is closed when you do this to ensure that the replaced .vmx file is reread. If things work with the replaced files, consider deleting snapshots that you no longer need. This will not release disk space only, but can also improve the performance of the virtual machine.
André
-
When I installed creative cloud for the first time I was not installed in the second computer and now I don't know how to do this. Can someone help me?
Hello
Please refer to the help documents below to download the application Adobe CC:
Download, install, update or uninstall applications
Kind regards
Sheena
Moving to the cloud creative download & install
-
Trying to set up the design of web premium cs6 on the new computer and I get the series numberr you entered is not valid
[Duplicate message deleted... post the same question more than once is confusing... MOD]
[This is an open forum, not a direct line to Adobe support... you have to wait a response]
2 links that can help
-http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
-http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html
-
I bought and the new computer and I need to download my membership of cloud which has no access to my old computer
Just download and install it as you did initially.
Cloud creation help / install, update or uninstall applications
http://helpx.Adobe.com/creative-cloud/help/install-apps.html
Install creative Cloud applications
-
How to get the name of the client computer and the name of the customer osuser
Hello everyone,
the trigger below works fine. But I want to get the name of the client computer and the name of osuser customer in the output of the same trigger shown below, how do I do this in the same trigger? any help is highly appreciated.
Thank you and best regards.
triggering factor:
------------
CREATE TABLE logonaudit
(
user_id VARCHAR2 (30),
sess_id NUMBER (10),
LOGON_TIME DATE,
host VARCHAR2 (20));
Table created.
CREATE OR REPLACE
Logon_audit RELAXATION
AFTER LOGON
WE DATABASE
DECLARE
V_program varchar2 (120);
BEGIN
SELECT UPPER (program)
IN v_program
SESSION $ v
WHERE audsid = sys_context ('USERENV', 'SESSIONID');
If (upper (v_program) as 'TOAD %' or upper (v_program) like '% SQLPLUS %')
then
INSERT
IN logonaudit
VALUES)
user,
sys_context ('userenv', 'sessionid'),
SYSDATE,
sys_context ('userenv', 'host')
);
end if;
END;
the output showing sessionid, date, db user name, as a local server machine name.but I want osuser of customer names and the name of the client computer as you know connection of clients to the database of their machines.how can I achieve? any help much appreciated.
Published by: 938946 on December 25, 2012 12:15 AMAccording to AskTom - do not use audsid, dangerous - can be 'zero '.
Maybe you are looking for
-
How to disable him drag the text selected for searching the Web?
How to disable him drag the text selected for searching the Web?
-
Win7 64-bit (pre-installed original), recovery for the 32-bit dvd disk
I just bought new laptop toshiba L500-208 recently. And I have absolutely no idea how to deal with this new kind of things! Please help me!I had a number of compaq for 5 years, when I have the format window just use 1 cd and this finished! But now th
-
Hi I recently factory zero my pc and reinstalled the wifi drivers and other at hp and made the keyboard type please help
-
So I call the Offline processing Utility (ORPU) a not executable call results in a plugin to perform a personalised treatment in another configuration. Everything works fine, including having run reduced (mostly hidden) by using the option/tray. Wh
-
LAN at impact software GPIB controller
I wrote a Labview program on a PC with a GPIB controller to copy card to control an electronic load GPIB using NI VISA and provided seller Labview VIs that use NI-VISA. I now have to implement the same program on a laptop using a LAN to the GPIB con