No display on Toshiba Satellite L455D-S5976 after using the screen external moniter

Similar Questions

• Should I update all the files from the Toshiba site after using the recovery CD

  I just used my recovery CD and update the Windows Update System.

  The question is: should I update all files in the files on this site download section as well?

  Usually after using the Toshiba Recovery CD everything should works and works correctly
  To my knowledge from time to time Toshiba has released new version of some tools or drivers. For example the BT stack will be developed all the time.
  But I think that if you have any problems with your system and peripherals, then you don't need t to update anything.
  Small is my opinion...

• Toshiba satellite C655-S5300 15.6 "replacement screen (widescreen)

  Where in Florida can I buy a toshiba satellite C655-S5300 15.6 "replacement screen?

  Here are a couple of Amazon online:

  http://www.Amazon.com/Toshiba-C655D-S5300-laptop-screen-replacement/DP/B006IGUHNK/ref=sr_1_11?ie=UTF8&QID=1339183620&SR=8-11

  http://www.Amazon.com/Toshiba-Satellite-C655D-S5300-laptop-1366x768/DP/B0077VC170/ref=sr_1_1?ie=UTF8&QID=1339183620&SR=8-1

  As far as being physically available at this store in Florida, I couldn't tell. I suggest looking in the yellow pages and started calling around.

  SC Tom

• Does not start after using the recovery Toshiba Tecra M5 - disk

  After using the restore on my Tecra M5 CD, the computer cannot even start!

  What to do in this situation?

  Hi jbdoktor,

  Does that mean exactly?
  Now, what happens if you start the computer?

  Sorry, but without this information it is difficult to help you. Maybe you should try the recovery again disk

• Satellite M40 - how to use the recovery cd

  I have a laptop Toshiba Satellite M40 using XP Home
  My anti virus has caught a virus and delt with him.

  He told me to reboot, which I did. When he started toward the high winlogin.exe TI displayed cannot start because it is missing shell32.dll
  I clicked OK and it showed lsass.exe failed to load because it is missing shell32.dll
  I clicked on OK and a message showed the user interface login user interface dll failed. Msglna.dll failed to load. replace or restore the original dll.

  I restart and it brings back me to winlogin.exe message.
  Normally I upload these files and install them, but I can't the computer on at all.
  I can't get the safe mode or safe mode with prompt orders and last known configuration failed.

  I have a Toshiba restore disk but I don't want to do a full reformat and the other option on the drive says not to use it if you know what you
  made with files - and I do not have.

  I watch the options he had, but it just made no sence and would not make my situation worse.

  I hope someone can help.

  Thanks much sally

  Hello!

  Looks like you have a strange virus on your laptop

  But I put t know why you don t want to do a complete reformat of the laptop. The point is that the Toshiba Recovery disk contains a picture of the factory settings. This means that you can restore t that only some files and you need to do a complete reinstallation of the operating system. To be honest, I think that it is in any case the best solution, because I think that the virus can only be deleted if you format the HARD drive using the Toshiba recovery disc.
  To use the only recovery disk, you must boot from it and follow the instructions on the screen. It of easy to use and only takes a few minutes.

  If you want to save some files before you begin reinstalling Windows, you can put the HARD drive into an external HARD drive enclosure. Then you can back up your data from another computer. I did it and I have had success with this and maybe you too. It s worth a try.

  And let me give you a little advice. After you have reinstalled Windows to use a good antivirus program and keep up-to-date. I have a good experience AntiVir (Freeware) and Kaspersky. In addition to activate the Windows Firewall or you use another firewall. Don t forget to install the latest Service Pack for your operating system and activate the Windows automatic update function. If you can get all of the updates in a timely.

  I hope I could help you, and now you understand the best deal.

  Good bye

• Satellite A300 - how to use the recovery with external DVD drive disc?

  Hello

  I bought a toshiba Satellite A300 - 15 d

  FTM the tsscorp drive that is installed in the camera no longer works (does not detect any type of media what so ever). ) need to recover the laptop, so I used a USB DVD drive to boot from the restore disc, but after that the charges of recovery console it says waiting for media in the f: drive, which is the tsscorp drive although I used an external drive to load the disc.

  What files should I edit to make it to load from the drive externally and if this isn't the solution, what do I do?

  Thanks in advance

  Hey Buddy,

  Unfortunately I think that it of not possible to use the recovery with external CD/DVD drive disc. Therefore, place the internal for use the recovery disc.
  You can get a new drive to an authorized service provider.

  But if the original OS from Toshiba is installed, you can use the function of disk recovery HARD reinstall Windows as well. Go to the advanced boot menu (F8) and select Repair my computer :)

• XP unbootable after using the recovery disk, but Linux will be

  I have a laptop Toshiba Satellite L25-S1216. I had some bad virus, so I used the TOSHIBA Windows XP Recovery and Applications/drivers DVD provided with the computer when I bought it. I had used this once recovery DVDs or two before without problem, the last time was about 1 year ago. The recovery process seems to be okay: he seemed to format the disk and copy the files from the DVD to the hard drive. He copied about 5 600 MB hard disk for about 10 minutes and 40 seconds.

  But the computer does not boot from the hard drive after using the recovery DVD. I tried the process several times and it does not start in Windows XP on the hard drive. I checked the settings in the BIOs to make sure he can start, but it does not start in Windows XP on the hard drive. All I get is a white screen with a horizontal blinking cursor, nothing else, no error message, nothing.

  Then I got a copy of Linux (Fedora 14 live) on a CD and started on the computer from the CD R - W, DVD R drive. Then I loaded Fedora 14 hard disk. , I can boot into Linux (Fedora 14) of the fine to hard drive. In fact I use Linux to write this e-mail now. I also see the files that have been copied from the DVD recovery Windows XP on the hard drive, when I'm on Linux.

  Does someone has an idea what could be the problem? The only difference between now and the last time I used the recovery about DVDs a year, is that I had to replace it internal CD R - W, DVD R drive, as a mechanical part was broken. I replaced it with the same exact model (TS-L462) who was in the computer when I got it is new.

  Thank you

  B.

  Not sure how a restore xp cd may give you the option to start the recovery console.

  With a regular xp, recovery cd / repair console is launched all simply by selecting the 'r' on the configuration screen.  Subsequently, the recovery console opens and takes you to the drive prompt.

  In any case, what I suggest is to execute commands to drive at the command prompt that could make the drive bootable again.

  the commands are:

  Chkdsk /r

  Fixboot

  bootcfg /rebuild

  FIXMBR

  Normally, fixmbr running on a laptop is not recommended because it disables the hidden partition that contains the files for recovery.  Then re-enable it manually, is not easy. But since you have your on dvd, then you are lucky.

• Toshiba Places Notifications will appear on the screen

  Hello.

  Can anyone help please?
  When I click on the flashing icon for Toshiba Places my notifications appear off the screen (lower-right) and I can't read them.

  I don't see the beginning of the window and the first 2 letters of the message.

  Thank you in advance.

  Maybe you should try to change the display resolution?
  Try to set a different resolution and test again.

• Cannot see data in excel after using the export_excel package

  After using the export_excel package of some cells in the display worksheet "#". If the cell is selected displays the data, but it disappears when you exit the cell and try to print it. Anyone know what causes this problem?
  
  Thank you

  Hello

  From the following link, the maximum width of a column in Excel 2000 is 255 characters: http://support.microsoft.com/kb/264626

  So, it seems that you may need to be upgraded, divide the cell into 2 or more cells, or add in a few line breaks?

  Andy

• every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > Connect wifi > my iphone doesnot ask me activation lock even if my unit is also found on

  every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > wifi connection > my iphone doesnot ask me lock activation that says that your iphone is connected with the old apple ID, please enter the id and password

  I always reset on find my optional equipment please tell me how to activate locking activation so that whenever I have factory reset my phone with finding my camera so my phone always ask an old apple and password

  I do not understand your question, but let me go with what I believe. Looks like you entered in iCloud and erased all the content and settings on the iPhone, and once you go by assigning back up again, you do not see something that you expect to see, for example, a request for an Apple ID. When you go through the installation process to select the language, etc., it must, at some point, ask you to identify yourself with your Apple ID. are you not see this?

  It would be better if you try to describe exactly what you do again. Also, without the help of any sign of punctuation, it is difficult to track everything you ask. Try providing the steps of what you do, and then what you see when you get to the point that you believe that something is going wrong. You mention both an old and new Apple ID, which is rather confusing.

• Cannot change the brightness on Toshiba Tecra S11 with Win7 using the FN keys

  I can't change the brightness on Toshiba Tecra S11 with Win7 using the FN keys (disable audio and other work fine) when logged in as a normal user.
  Shortcuts keyboard console appears and pressing F6 or F7, the brightness is always set to level 1 (no matter how luminous monitor is really) and cannot be changed.
  I can change it via power or Administrator Options.

  Hello

  Maybe you didn't install VAP (value added package) for all user accounts.
  Please reinstall VAP by using your user account.

  You can also check if the user account is the Admin right supported.
  You can run simple applications (exe) as an administrator.
  For this, he must right click on exe file (value package) and should choose + Run as administrator. +

  Check it!

• My Aspire one 753 does not connect to WIFI after using the Recovery Manager.

  After using the recovery on my Aspire one 753 inbuild Manager my phone doesn't conect to wireless internet. I think the problem has something to do with the drivers, but I'm not sure. need help ASAP

  I used the live usb of ubuntu when I discovered that my network card was acutally one of Intel wifi card. https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24217&lang=eng&ProdId=3316. Thank you very much for your support on the issue

• is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Hi Kenelms,

  You can follow this link & check if it helps.

  HOW to: Set up hardware profiles for laptop computers in Windows XP

  Hope the helps of information.

  Please post back and we do know.

• HP Pre 3 - black screen after using the phone

  Hello

  That happened a few times before.

  It works in the way that all of a sudden my phone does not the keyboard cursor or button up to turn the screen.

  I have to remove the battery and start again to respond again.

  Tonight, I got an updated via the Update Manager and installed, something 2.2.0.x.

  Now, if I call a number that forces me to use the keyboard to make choices, I am unable to use the screen.

  I can press numbers using the keypad, and after the call - the screen is black and does not respond to what it is.

  I also have to reset my phone again to make it work.

  Any suggestions?

  -BR

  Solution: http://forums.precentral.net/palm-pre-pre-plus/204001-blank-screen-during-calls.html

  It happens because the screen protector that comes with the pre 3 is of poor quality and mess up the proximity sensor.

• Stupid question CS6. How can I get rid of my experience after using the quick selection tool?

  Stupid question CS6. How can I get rid of my experience after using the quick selection tool?

  The best way would be to make sure that your layer is not a background layer: click the lock icon in this case. Then click the icon at the bottom of the layer panel layer mask. This will create a mask that you can refine and not be destructive.