No drive detected the 0141 error code 2000-0141 msg error code

Similar Questions

• HP Pavilion a6645f no hard drive detected BIOHD-2 error

  1st off I'm no computer expert... so I really have no idea what I'm doing, but I've been looking online to the best of my ability and try everything that I have seen that I can understand how to solve the problems.

  First of all, I got the cursor flashing at the top left of a black screen, now I get the boot failure message, insert the disc... I did that dance together and nothing comes of it.  Error cannot be fixed with the scan that it allows me to do using the system disk, I did.

  I managed to access a screen that informed me that I have this error BIOHD-2, no hard drive not detected.

  It's a Seagate Barracuda HD 500 GB 7200.11

  I removed the Panel and went there... insured all caps were closed, tried a different SATA port... and when I go into the BIOS I can not get the comp to recognize any HD is connected... all read 0 MB.

  From my research I found information contradictory on this... some sound like its without a doubt a HD - sound problem is, some say it could be a motherboard problem?  Is - it necessarily one or the other based on the info I gave?  I read that I should try to connect the HD to another PC with a SATA port, but this will affect any PC I plug it somehow? Let's say another computer detects the HD when I look in the BIOS, I'll be able to extract all the files and programs from there? How will I know if the motherboard is the issue and not the HD? As ports have bad or the taking of the HD to the motherboard maybe? It is even probable, if yes?

  What if it is the HD, and I can install an old HD work? Is there a way I could try to extract anything from the Seagate which is in there now?  Unfortunately, the only things that I backed up on an external are some pictures and a few digital scrapbooking files.

  Still, I'm NOT a computer person so half may not even be English in computer science, but I hope I made sense. Laughing out loud

  Oh, and I'm no longer in warranty... HP told me when I called this past weekend when it happened. PC is about 3 or 4 years... don't remember not that December it was bought in.

  Thanks to all those who have actually tried to read and give a sense of my mess

  semperfibc,

  Thank you for your service.

  Several years ago, Seagate had a problem of firmware with the Seagate Barracuda 7200.11 drives. The reader would cease all features. Your beyond any warranty on this drive, and have no options that are financially reasonable.

  Now, you need to install a replacement drive.

  I hope you did your ONCE one Recovery DVD. Otherwise, you will need to buy them from HP.

  You can try an external SATA to USB box with this old disc, but there is no guarantee.

• Troubleshooting installation printer driver on the computer. error message: "the arguments are invalid.

  I recently purchased a Brother (MFC-J265W) all-in-one printer that has a wireless capability.  I finished configuring wireless from the machine, however when I tried to install the printer drivers by using the CD-ROM, the installation failed because an error message indicates that "arguments are invalid".  I contacted brother customer service and they said it's a matter of Microsoft.

  A few details:

  I use Microsoft XP Home edition 32 bit SP2. It came installed on my laptop (Acer).

  I've uninstalled and reinstalled the driver several times, but I get the error message.

  I tried to download and install the latest driver from the Brother Web site, but I still get the error message.

  Specifications (in the manual and on the Windows website), the printer IS compatible with Windows XP.

  I would like to know how to solve this problem and also to understand what means the error message.

  Thank you

  When a hardware vendor says "It's a problem of Microsoft", without providing further details, you can be sure that you talk with a person of lazy tech support who wants to end the call and does not know how to solve your problem.

  I suggest that you completely uninstall some pieces of the printer driver and the associated software are already installed using the directions here: Article 1.  Then, disconnect your computer from the Internet, run your antivirus application disable (disable realtime protection) and install the printer as if you planned it or connected to the computer via the USB port, but do not connect the USB cable until you are prompted to do so.

  If you successfully installed printer as a USB printer, converting the wireless connection should be reasonably simple :-).

  If the above procedure doesn't help, especially if you get the same error, return brother support and request that escalating the issue until you find someone who can help you.

• How to get windows xp re - install for installing the flash drive to the computer error portable "windows\system32\config\system".

  My Acer Aspire One has error "windows\system32\config\system" How can I get a copy of windows xp original usb? When I bought the

  computer laptop windows xp made & paid for. Product key is on the back. Can I download & reinstall using a flash drive?

  C:\Windows\system32\config\system is one of the files that make up the system registry.  Backups of the system registry files are kept in the 'C:\System Volume Information' folder under the system restore program.  Probably all you need to do is copy of registry backups in the Windows\system32\config folder.  A reinstall of windows may not be necessary.

  To do this is to start your machine from a free "Live Linux" thumb drive.  You can create a startup disk Ubuntu here:
     <>http://www.Ubuntu.com/download/Ubuntu/download >

  Follow the instructions of "Try me" and you should be able to copy backups of registry in place.  Windows has "Hidden doubling" the System Volume Information folder, but Linux doesn't seem to have any problems with it.  After starting from the Thumb Drive Linux, follow the instructions in the following article from part 2, step 6, using the graphical interface of Linux to copy files (right click copy, make a right click Paste) instead of the lines of command in the article.  With a little patience, you can restore the registry from a backup, and be back in operation

  "How do I recover from a corrupted registry that prevents Windows XP startup"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• E120 Lenovo Edge - cannot detect the WAN of GOBI 2000 map

  Hi, I hope someone could help.  I bought an E120 that my country does not see the X120e

  I bought a card WWAN of GOBI 2000 dealer of Lenovo.  The card passes through the white list very well although it is not mentioned as one of the taken WWAN devices supported.

  I tried to install the 7xwc48ww.exe (drivers X120e and Edge 11 WAN) to see if it would work.  The GOBI loader installs, but the driver does not load, sense - in device - PORTS - Gobi charger Manager

  -In device - network adapters - No. Gobi WAN Card Manager

  I also tried the solution-http://curiouslynerdy.com/2009/05/qualcomm-gobi-wwan-card-on-windows-7/ , but still no joy.

  According to me, the X 120 and E120 are very similar, so I guess the Gobi WAN should be able to work.

  Can anyone suggest an alternative?

  Thank you very much!

  The E120 Edge is like the X121e GOBI 3000 or F5521gw will work. I tried a GOBI 2000 in my E120 with the same result as you.

• cant degrag hard Drive on the computer error "can't do without setting up the Task Manager."

  I have a Hp slimline quad core computer with Windows 7 Professional. I'm trying to defragment my hard drive, but whenever I try, a window appears and says that I can't do without setting up the Task Manager. But when I open the Task Manager, I can't do or change something in it. Can someone help me please. I really need to defragment my hard drive bad. Thank you.

  Hi Daniel,.

  Please follow the below URL and let know us the status. Thank you

  http://www.howtogeek.com/66622/stupid-geek-tricks-6-ways-to-open-Windows-Task-Manager/

• How to detect the write-protected SD card

  Hi all

  I couldn't find the answer to my question, so I started a new thread.

  Problem: I would like to as for Labview (or directly TestStand) detect programmatically whether an SD card (secure digital) card has the "write protection" slider switch active.

  Is it possible somehow?

  PS: I also couldn't find this information anywhere in Windows 7 as well. I use LV 2011 SP1.

  PPS: For the moment I'm trying to create a file on the SD card and detect the clerical error, telling me whether or not the card is protected. But I would like a more elegant solution.

  Wow, it's already here for Labview: http://zone.ni.com/devzone/cda/epd/p/id/2048

  All you have to do (I hope) is to analyse this value 'flags '!

  Marco

• Received error BSOD, ran Diagnostics, got the error code 2000-0146, tried to boot from different HARD drive, got the same stop error message

  So my friend gave me his computer dell laptop. The thing would boot normally for a few days until he would give me a blue screen of death with the "UNMOUNTABLE_BOOT_VOLUME" message constantly to not even upward. I ran the diagnostics and got the error code 2000-0146. What I've read, this code error means that the HARD drive is bad and must be replaced. So, to make sure that it's the hard drive, tried to boot from an old hard drive, I got around the installation by USB and windows gave me the same stop error message. May - so that means it's a motherboard problem?

  No, it isn't - unless the operating system was installed on this drive AND the system in question, that it won't work as a bootable drive.

  Unplug the system, remove or disconnect the battery and hold the power for 30 seconds approximately.  Turn on and re-run the diagnostic tests - if the same error appears again, the drive is bad.  Replace it.

• VISA-1073807343 error code when using ResourceManager.GetLocalManager (). FindResources (filter) to detect the map of Pickering PXI

  I'm upgrading our test system for Windows 7 and NI Developer Suite 2012 DS2 in Windows XP and NI Developer Suite 2008 4th quarter. I have a problem with the help of VISA to detect devices PXI of Pickering. The problem occurs with the next .NET NationalInstruments.VisaNS.ResourceManager.GetLocalManager () call. FindResources (filter). I use the filter "PXI? * INSTR.

  To trouble shoot this problem I was using the VISA program FindResources.2008 c# example. I get the following error message when you apply the "PXI? * INSTR"filter. "Where not enough information or the device or resource is not present in the system. VISA-1073807343 (0xBFFF0011), ErrorResourceNotFound error code.

  Looking at other markets, I infer that VISA is not find the maps. I came across the same error message when I tried to launch the "GPIB? * INSTR"filter however I determined that there was a problem with the NOR-488 driver. 2. after having repaired the driver of the FindResources.2008 program would find the GPIB instruments using the "GPIB? * INSTR"filter.

  Max the Pickering cards appear in "Devices and Interfaces" and are listed as follows:
  12: PCI Device 'PXI12::9:INSTR '.
  15: PCI Device 'PXI13::13:INSTR '.

  In XP, the cards have been identified as:
  PXI12::9:InStr (Pickering 40-785-522)
  PXI13::13:InStr (Pickering 40-780-522)

  Also Max for each device, I am able to open the Panel to Test VISA.

  Any ideas why the VISA is not able to detect these cards?

  Thank you

  I thought about it. Apparently I needed Windows 7 to install the driver for cards of Pickering. I guess the "PXI VPP / VISA drivers" supplied by Pickering Test would take care of this.

  Until Windows has installed the driver of Pickering cards have been listed as a PCI device under 'other devices '. After installation, the cards have been listed under "devices PXI of NI-VISA.

  MAX the card now are listed as:

  12: Pickering 40-785-522 'PXI12::9:INSTR '.
  15: Pickering 40-780-522 'PXI13::13:INSTR '.

• Error Code BIOHD-2 disk hard don't Test no drive detected

  I'm working on a HP Pavilion p6214y desktop PC.

  Just to list the specifications for any unusual problems:

  OS = Windows 7 Home Premium 64-bit

  MB = HP P/n: 513430-002 with AMD Athlon II x 4 620 Quad Core

  HD = Western Digital 1 TB

  Power = 350W LiteOn

  RAM = 8 G

  I get a blue screen that displays the 4 options and I chose F9 for diagnosis and he gave me a BIOHD-2 error code when checking the hard drive. He said that no hard drives have been detected. I read about it here and checked the bios and it does not find the hard drive. If most people say it's a bad hard drive. Although I put the drive in another computer and I can get the files from the hard drive and view them. It detects the drive in the bios. I also put a disc hard work of the other computer in this HP and it will not recognize a hard drive via the bios.  Given that the motherboard does not recognize HDD through sata ports I guess a mother board failure. I then put in a usb bootable Ubuntu 12.10 version. He turns round and will have access to the internet and everything. So, my little knowledge, means that the motherboard is still okay, right?  I don't think I read everywhere that the motherboard can go wrong only to sata ports. Anyone know if this is a possibility? Is there a chance that I could save the situation by buying a set of recovery disc for this model precise and just reinstall everything? I heard that they are usually $ 20, then it would be a good trial and error.

  In addition, it will allow recovery sometimes on the blue screen screen, but he won't do anything because the keyboard stops working at this time.

  Just another tech junkie.

  Hello:

  If you use ubuntu since the USB drive and not the hard drive, then Yes, there is a real possibility that the motherboard sata controller has failed.

  I think the motherboard of your model is notorious for failures of controller sata as evidenced in these numerous threads below.

  http://h30434.www3.HP.com/T5/forums/SearchPage/Tab/Message?Filter=labels%2Clocation&location=Category%3ADesktopPC&q=M2N78-la+.

• CD/DVD drive does not work error Code 19 a dI have tried all the solutions of correction that I can find.

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I tried Mr. Fixit, and I still keep getting the same message again and again... It was working fine, less then a month ago.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Please make all underneath the same if you've done it before as it's often the total of the process which
  solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.

  Normally the above will solve this problem if not work your way down through them, even if you
  done before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  --------------------------------------------------------------------------------------

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error code 28: could not find the drivers. Windows 7 64 bit could not find the drivers for my Seagate Expansion Portable Drive. The same system works for another 32-bit version of windows 7.

  Hi, I would be grateful for help on this, I bought a new seagate expansion external hard drive not too long ago (abt 3 months old) and tried to use the device only recently (to back up my files). Windows has detected the drive but says that it could not find the drivers. (code 28)

  When I tried the drive on a 32-bit computer, it showed up working find and dandy. When it is plugged in the computer of the alien-ware, same error.
  Tried the uninstall from Device Manager and restart the computer, still the same error.
  Services.msc open and found windows install offshore. He turned on automatic, but the same error came out. Plug and play Windows was already working.
  Checked Windows SP1 worked, still the same error.
  He got me completely baffled.
  Before this, I had other problems with USB and disabled driver signature Verifier (I think that's what it was called) before you boot into windows. Worked very well for my flash drives each time that I did.
  I also had another external HARD drive which was held only 160G and it worked, so I'm not sure what the problem is with this particular external hard drive.
  Please help, I'm going crazy on this problem...

  The specifications of my devices are as follows:

  Computer

  Model:

  Alienware M14x

  Type of system:

  64-bit operating system

  Hard drive model:

  Portable Seagate Expansion 1 TB drive

  Hello

  28 error code means that the device was not fully installed.

  Method 1: Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  To open the Troubleshoot utility equipment follow the given link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can update the drivers and check out them.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information.

  Install a USB device:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Hope this information helps.

• Impossible to install the driver of Logitech Webcam - error code 19

  Hi gurus,

  I just buy Pavilion m9400t with Vista x 64, Dual Core Quad Q6700.

  Install Logitech QuickCam Pro 4000 without problem, so I decided to upgrade with the new webcam (Quickcam communicate Deluxe) and the beginning of the problem.  Install the new driver/software without problem, after reboot when I try to use the Webcam webcam cannot be used..., check the Device Manager for this webcam and found he said one! status, with the following error code:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (code 19).

  Tried the following, but nothing works:

  1 uninstall and reinstall using the new driver from Logitech.

  2. Uninstall and reinstall in safe mode.

  3. Uninstall and reinstall using the generic driver

  How can I get rid of this error code 19?

  Thank you

  In this issue fixed. Used regedit folder specific location and delete the LowerFilters entry, exit and it will get rid of the error code 19 from Device Manager, not even require a restart.

• Drive DVD-ROM 37 error message Code in the Device Manager on Satellite M30

  Hello

  I'm new to this forum and I wonder if anyone can help? I have a Satellite installed 30-106 M which has the above CD. At present, it does not work when I go to Device Manager, the error massage that I have is that follow 'Windows cannot initialize the device of this hardware driver. (Code 37) ».

  Can someone offer me some advice please.
  Thank you
  Trevor

  Hello

  I studied in the Microsoft Knowledge base, and it seems that this error is displayed because the driver returned error in her routine to the driver entry.
  I think that you need to uninstall the driver, and then click find the hardware changes to reinstall or upgrade the driver.

  You can do it in Device Manager. Otherwise, you can remove the drive in the Device Manager list and after restart of the new mobile operating system should recognize the drive again.
  After this procedure, you should test the device if it will work.

• I can't drag and drop files in the trash, error code-43 is detected, what should I do?

  I can't drag and drop files in the trash, error code-43 is detected, what should I do? What is an error code - 43?

  You can't empty the trash or move a file to the trash

  If the above does not help, then see below:

  Visit The FAQ XLab and read the FAQ on the waste problems. You can also try using Trash it! 5.1 to solve the problem. Or you can try this:

  Open the Terminal in the Utilities folder, and paste the following at the command prompt:

  sudo rm - Rf ~ /. Trash

  Press RETURN. Enter your administrator password when prompted. It will not echo to screen. Press RETURN again.

  (Someone should tell you that it is dangerous or useless, please disregard the comment.)