No driver available for Photosmart c4780

I try to use my old Photosmart C4780 with my MacbookPro, and when I try to add the printer it says "the software for this printer is currently unavailable. Please contact the printer manufacturer for the latest version of the software. »

Can anyone help?



I'm sorry that you have a problem with the software. I would like to go to the site below, the software for your printer.  I would be totally uninstall and reinstall the software downloaded from the link below. & dlc = in & lc = in & product = 3794615 & task = &

I hope this helps

Tags: HP Printers

Similar Questions

  • Photosmart C4780: connection for Photosmart C4780 wireless

    I spent two hours through the simplistic menu of the printer, only to print copies of the Configuration Page of HP network and Test wireless network without success reports. I think I made all the necessary steps... such as the restoration's default network.

    "Your HP printer cannot find your wireless router. Check that your wireless router is powered. Make sure that your network printer HP (SSID) name exactly matches the network name (SSID) wireless routher yout. If they do not exactly match, run the installation of the wireless network to set up your HP printer.

    Well, I have entered my IP address of the router as the url of the browser and connected to my cable account, but was not able to change the SSID.

    I also looked at the Youtube page help HP and on discussion forums and tried to use the suggestions.

    One who seems to be similar to my situation is this:

    I, too, can't find "the HP network configuration.

    I also downloaded the Printer Driver HP Patch for my OS.

    At this point, I'm not sure that I can do. The other suggestion on this page was to find a friend with a PC. I phone my mother on-site, running Windows 10. I also downloaded its respective driver. I don't know what I should do next. Any help would be appreciated.

    I have a D-Link router, and I can provide additional information, such as IP, WiFi SSID, pine, etc., if necessary.


    You need to press on you first, WPS option on the printer.

    Please, try this and let me know how it goes:

    1. On the printer control panel, press the button next to Scan, and then press the button next to the Wireless Menu.
  • No USB 2.0 driver available for HP p7-1254 (for the installation of Windows 7)

    P7-1254 HP Desktop
    Windows 7 Edition Home Premium 64-bit

    I replaced my hard drive and do a clean installation of Windows 7.
    I already found the drivers from site, and I am familiar with the order and the process of installing the driver on this machine.

    My problem is; HP seems to offer is more USB 2.0 for downloading drivers.

    USB 3.0 drivers are all that is available for the HP p7-1254.

    So I have two questions:

    1. can I install only the drivers USB 3.0 on a Windows 7 computer, and wait for my USB 2.0 devices to work?

    2. in the case, where can I download drivers USB 2.0 for this machine?

    Thank you in advance for any help or advice you offer.


    Windows 7 has the USB 2 drivers included with the operating system.

    USB3 drivers will only install the drivers for the 3 USB ports.

    You must install the amd chipset driver and restart the computer before installing other drivers.

  • Link-5 dongle no driver available for Win 7 Pro 64-bit

    Bought an Elite v2 Wireless keyboard that comes with a dongle to Link-5.

    The keyboard is listed as compatible with Win XP, 7, Vista, 8. But when the link-5 dongle is connected to my EliteBook 8470w windows reports that could not be not installed, no driver available. It appears in the device under 'Other devices' Manager with a warning icon.

    The product help said that no driver is necessary. The laptop is fully patched and running Windows 7 Pro and clearly needs a driver. I have confirmed that all the elements in the keyboard and HID a current drivers Device Manager, but still the dongle is not installed.

    Finally reinstalled all Drivers USB Intel and the keyboard has been recognized.

  • DVD Windows media player cannot play this dvd because it is not possible to activate the ANALOG on the output display copy protection try to install a driver available for your video card

    When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

    When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

    What version of Windows are you using?

    The free VLC Media Player may be worth a try...

    It will play anything.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    VLC Media Player (32-bit Version)
    (works on XP, Vista, 7, 8)
    (the name of the file to download is: vlc - 2.0.5 - win32.exe)

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    VLC Media Player (64-bit Version)
    (works on XP, Vista, 7, 8)
    (the name of the file to download is: vlc - 2.0.5 - win64.exe)

    And the following links may be worth a visit:

    (2004673) Windows Media Player cannot
    read the DVD because it is not possible to
    turn on analog copy on the output protection

    Windows Media Player cannot play the DVD because it is not
    possible to put on the protection against analog copying on the output screen

  • Where's MAC address for Photosmart C4780?

    Hi people,

    I'm implementing this Photosmart C4780 with my wireless network that uses MAC security screening. Can someone tell me where to find the MAC address of my machine? It must be 8 digits with numbers and letters, possibly separated by a colon.

    Thank you!

    Well, to answer your question, it can be found on a network configuration Page or test wireless network, as well in the configuration > area of the network control panel.

    Now, please recognize that MAC filtering is NOT a security measure and can cause problems with the installation of the printer.

    Read more about it here.

    I would recommend filtering MAC do not hide the SSID and simply apply WPA or WPA2 with a password strong.  You will be safer than you are now with much less hassle.

  • Installation scanner/printer HP Photosmart 5510d series has no driver available for Windows 7

    I have a new HP photosmart 5510d scanner/printer (wireless). I installed it via the CD, but cannot send anything from the PC to the printer. Nor the radio available, I have it on my devices, but it is said that he needs help desk, when I do this it tells me that I need a driver, when I check for a driver, told me that there is not one for the 5510d. I can scan/printing without PC but hold the hooked up wireless and PC. What can I do?


    I'm sorry to hear that the problem with the installation of HP printer driver. It seems to be a compatibility issue with Windows 7.

    Let us try the following methods; I'm sure this will help you to solve the problem.

    Method 1:

    Try the steps in the following Microsoft article.

    Printer in Windows problems:

    Method 2:

    Try to uninstall then reinstall the printer drivers.

    Find and install printer drivers in Windows 7:

    Method 3:

    Try installing the printer in Windows Vista compatibility mode driver

    Make older programs run in this version of Windows:

    For more information, see the following Microsoft support article.

    Please reply with the status of the issue, so that we can better help you.

  • No wifi driver available for hp 15-r033na windows 7 64-bit

    Hi I have a laptop hp15-r033na and can not access internet via wifi all the other driver is available but this one for the wifi... I am running windows 7 64 bit, here is the hardware id

    PCI\VEN_10EC & DEV_8179 & SUBSYS_197D103C & REV_01

    Thanks Adam.


    You need this driver...

  • Need info on max size of HARD drive available for Satellite Pro M30-813


    The question is mainly to be sent to Toshiba authorized support personnel. The limitation of the maximum size of a HARD drive internal that I could use with my Satellite Pro M30 - 813, what exactly?

    Recently, I bought and installed seagate SATA drive of 160 GB, on which I installed WXP Pro and have been running for a while with no problems. Recently, I've been copying large amounts of data to an external hard drive to my new internal drive, and that the files have been copied, as I noticed have about 50 GB of free space left, I knew windows "delayed write failed" and a failure of massive wall without the possibility to recover the data. The system would no longer boot time and the entire MBR has been damaged. As a result, I lost all the data on my new drive.

    Well, I realize that Toshiba is not responsible for additional hardware that I use with my computer laptop and who is not officially supported by Toshiba, I am sure that as an end-user of a Toshiba product, that I have the right to know a lot information of limiting size of HDD for my model of laptop. So I ask, representing technical support Toshiba to give me an official reply directly to my question.

    Thank you in advance,


    (You can also contact me private my e-mail address)

    Hi Andrew

    > The question should mainly be addressed to Toshiba authorized support staff
    I think that you are in the wrong place if you are looking for a response from an authorized Toshiba support.
    This is a user to user Toshiba forum! You will here meet passionate and Toshiba laptop owner who share knowledge and trying to solve the problems, but no one of Tosh :(

    I could give my experience with Satellite M30 and HDD upgrade possibilities.
    To my knowledge the M30 Sat supports a 40 GB, 60 and 80 GB HARD drive for sure.
    In my opinion, you can use the 100 GB HARD drive, but more large HARD s drive will not run and works correctly.
    So go to a smaller size of HARD drive and enjoy the laptop!

    I've goggled a bit and found compatible drive HARD and part numbers
    HITACHI GBC000Z810-> 80 GB
    HITACHI GBC00014810-> 80 GB
    TOSHIBA HDD2188B-> 80 GB
    HITACHI G8C0000Z610-> 60 GB
    HITACHI G8BC00013610-> 60 GB
    TOSHIBA HDD2183-> 60 GB
    TOSHIBA HDD2184-> 60 GB

    I hope this might help you a little!

    Best regards

  • Manually uninstalling the program driver struggling for Photosmart C6280

    I had problems that motivated me to uninstall and reinstall my driver. Unfortunately, the uninstall program has been damaged and did nothing. I tried to reinstall it on top of the current program but the Installer did not provide this option when he saw that the program was. I tried HP Print and Scan doctor but he said everything was fine.

    I tried to uninstall manually. I removed startup entries, registry entries and most of the files in the directory of Hewlett-Packard. 4 files will not delete even if I thought I had all the startup items. It says: "cannot delete hpqddcmn: access denied." Make sure that the disk is not full or write protected and that the file is not currently in use. »

    My printer is a HP Photosmart C6280 all-in-One.
    I have Windows XP SP3
    The printer is connected by USB cable

    Ok no problem.

    If the C6280 software has been downloaded and extracted to your system:
    1. type % temp % in the field of race
    2. Locate and open the folder starting with 7z (example: 7zS2356)
    3 open the Util folder
    4 open the CCC folder
    5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
    6. once the uninstall is complete, restart the computer
    7 run the Accessories\ System Tools Disk Cleanup

  • Driver software HP Photosmart c4780 installed on windows 7

    I have a windows 7 64-bit OS and I try to install the printer software.  Initially, the software begins and the place where it looks for updates it just disappears.  I see nothing in the task manager leading me to believe that he just stopped.  The first time I tried to install the software it really hooked at this point and I used the Task Manager to close.  Since then he disappears.  I also tried to install the drivers manually, but there is no printer not under Hewlett Packard or HP photosmart C4700 when you go down this path in Windows.  I also looked on the HP site, but all they provide is downloading the full software.  Needless to say that I can't print with this PC because Windows does not recognize when you plug in USB, and even less wireless.  Interestingly, the network HP printer utility is no problem and then reported the same software that crashes for the installation of the drivers.  Any ideas on what I can do?  I tried everything what HP list under troubleshooting without success with the last suggestion is to post on this forum.

    I think that the compensation on the temp directory did the trick for me, see this step of binding support HP 3:

  • HP 250 G4 (M9S62EA): SOLVED: driver available for AMD R5 M330 (win 8.1 x 64)?

    Hello to all members of the community! My English is not very good, sorry...

    Recently, I became the owner of the laptop HP 250 G4 (M9S62EA). I had a dilemma.
    When I tried to download the drivers for your laptop for MS Windows 8.1 x 64, server formed the next page request:

    «Not found »
    " The requested URL /pub/softpaq/sp71001-71500/sp71254.exe was not found on this server."

    Why is - this file does not exist on the server? But there are files with control somm & description (sp71254.cva, sp71254.html). Where the Customer Support HP?

    Perhaps someone among the users of the community have this file ' sp71254.exe '?

    Please, share the link!

    Thanks in advance, Alex

    Finally, after a request for technical assistance, driver returned to the ftp server.
    Direct link to the driver "AMD Radeon R5 M330" for "Windows 7/8.1 x 64:

    PS. : Respect to specialist technical support HP interactive chat, Witalij N.

  • Only 24 of 48 drives available for the disk pool

    I have a MD3220 with a shelf of 1220 and I try to re - configure and create a pool of large disks with all 48 records.  When I go to create the disk pool, it only takes 24 14 to but shows 32 TB available disks.  I amazed the previous installation configuration because we had to take a tablet of 1220 from this table not used for another project, so now I'm back to reconfigure.  I wonder if the high-end features must be re-activated because I deleted the config.  Maybe, that's all.  When I go to md - to regenerate a key of course it doesn't have no idea what my system.  Is there something that I am missing.   Should be a two-minute task that will now take hours apparently.

    Hello Tradsd,

    Ah, that's your problem. Yes two disks must be of the same size & speed, otherwise the pool will use the specifications of the smaller disks to build the pool. Yes, you can develop the direct pool you just need to get seen by MDSM readers and as long as they are showing that no, so you can assign them to a disk pool or group of disks that you want to. Here is a link to the Administrator's guide, and if you look at page 97 he explains about the readers with the same physical size. FTP://

    Please let us know if you have any other questions.

  • Canon EOS 10 d no driver available for Windows version 7 or earlier version

    I recently acquired a Canon EOS 10 d, but windows does not recognize the camera and as such I can't retrieve the images from the camera

    I tried the American sites and support Global Canon but can't seem to find the drivers (even xp / vista for backward compatibility with)

    Any suggestions for help would be appreciated.

    All I need is the memory card to be talked about while I can even cut and paste the files of it.

    Perhaps? - can help.

    When I chose W7 64 bit on this page - - it says ' there is no driver for the OS Version you have selected.» The pilot can be included in your operating system, or you may not need to pilot. »

  • I installed a firewire card on my pc windows 8 and come to find out that there is no driver available for my Panasonic pv103 dv compatible camcorder.

    Since there is no compatable driver with my camcorder and windows 8, I searched online for a usb digital-to-analog converter.  I just realized that I can't find an a d converter that is compatible with windows 8 either (at least at a reasonable price).

    I brought the computer to edit video on - and so far I can't.


    Is the problem with the Firewire card or camcorder?

    Whatever it is, you can try to install in Compatibility Mode for an earlier version of windows...

    You could also try right click on the Installer (installation-installation-whatever) for the device file problem and select troubleshoot compatibility. Just follow the instructions in the wizard.

Maybe you are looking for

  • Library icloud music isn't on my iphone

    Our family has recently enrolled in music apple and came to know that my son's iphone is not able to connect to our share of apple. It can be downloaded on his laptop computer. I noticed that the option to toggle the music library of icould is absent

  • Boot Fail, Kernel Panic all the time.

    My Mac Pro early 2008 does not start I have constantly to the kernel with the usual panic ""you must restart your computer. " Hold down the Power button for a few seconds or press the restart... in 4 languages. Start Up Manager all my Bootable drive

  • Factory\HARD reset HP DesignJet T2300

    Hello! I have HP DesignJet T2300 with lost password. How factory\hard reset this device or enter the service menu (I hope, hard reset is in the menu)?

  • Unibody Macbook late 2008 not charging - are my Stats of battery OK?

    Poster for the first time. Fortunately, my seven-year Macbook rarely has problems. However, now, I fear the worst. My battery will not charge. If I plug the charger in, I get no green light. He used to turn on intermittently, but now nothing. I tried

  • Massive causing Explorer.exe download activity

    What could be causing the explorer.exe process to download loads data randomly. It happens only on certain hours during the day, not always and can upload up to 300 MB per hour if left alone. I downloaded THE counter and view TCP which are the progra