no error as such code

Similar Questions

• How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

  Hello

  Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
  OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

  Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

  grateful for the help!

  Hello

  > message: unable to load powrprof, object: CLSD-no-it is found;
  In my view, this would mean that there is a problem with Toshiba Power Saver
  What laptop Toshiba, you have exactly?

  Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

• HP DL380 Gen9: HPDL380 Gen9 GRUB! error: no such device: HPEZCD240

  I have to install the operating system in a new Gen9 DL380.

  It has two SATA drives.

  After starting "Inteligent Provisioning", I get the following error message:

  "error: no such device: HPEZCD240.

  No idea how to solve this problem? Is there another way to set up the matrix of discs?

  Thanks in advance, Miguel

  I found the solution in page 10 of the manual http://www.hp.com/ctg/Manual/c04419967.pdf

  I was because I added a GPU, and I plugged the monitor the GPU video output.

  From the Manual:

  Cause all the Gen8 and Gen9 ProLiant servers provide only video F10 on the integrated video card and through the remote console of the ILO. If a GPU is installed in addition to the integrated video card, the software is unable to determine the "right" monitor at boot time, and F10 video redirects to the virtual video of the ILO or the integrated video port.

• An error occurred during the update error checking new Code 80072EFE

  An error occurred during the update error checking new Code 80072EFE

  error 80072EFE infected by a root

  Launch tdsskiller to find any rootkids, download and run from here

  http://support.Kaspersky.com/downloads/utils/TDSSKiller.exe

  your computer will restart automatelly and start up. Then run the updates.

• I tried for weeks install windows updates and get this message error (s) found: code 80070645 windows has encountered an unknown error. How can I solve this problem?

  Windows Update
  Error (s) found: code 80070645 windows has encountered an unknown error.
  I had before the shock of two antivirus this proven system restoration started but no help.
  Fix it to charge microsoft, but has not helped any.

  How can we if this problem, so I can install the updates I need?

  Hi Wyattsdaddy,

  Thanks for posting your question.

  Step 1: Check if Windows update-related services are set to automatic and started.

  Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.

  Check the above services below:
  (a) Background Intelligent Transfer Service
  (b) cryptographic service
  (c) Windows Update

  Step 2: Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. at the command prompt, type the following commands and press ENTER after each line:

  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc
  output

  3 remove all tmp*.cat to the following folder:

  % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  Step 3: Reregister DLL files that are associated with Cryptographic Services

  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.

  2. at the command prompt, type the following commands and press ENTER after each command:

  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll

  regsvr32 softpub.dll
  regsvr32 wintrust.dll
  regsvr32 initpki.dll
  regsvr32 dssenh.dll
  regsvr32 rsaenh.dll
  regsvr32 gpkcsp.dll
  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll
  regsvr32 mssip32.dll
  regsvr32 cryptdlg.dll
  output

  Note: Click OK if prompted.

  Restart the computer.

  Step 4: Empty the software distribution folder

  1. Click Start, type services.msc in the search box, click services.msc, and then click Run as administrator.
  2. in the Services (Local) pane, click Automatic updates and then click on stop.
  3. reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

  Note: By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5. make sure that the Windows distribution folder is empty, and then enlarge the Services (local) window.
  6. in the Services (Local) pane, click Automatic updates, and then click Start.
  7 restart the computer, and then run Windows Update again.

  Item appraised: http://support.Microsoft.com/default.aspx/KB/822798

  Step 5: Disable the security software
  Note: You can enable it later.
  Step 6: Scan Run SFC
  Please follow the steps below to the auditor of the filesystem as the first steps:

  1. Click Start and type cmd in the box start the search.
  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  Note: The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.
  http://support.Microsoft.com/kb/949104/

  Step 7: Components to reset Windows Update
  http://support.Microsoft.com/kb/971058

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Error (s) found: Code 800072EFE when installing an update

  Original title: KB71644 32-bit platform update

  Hey, I tried to download the update for my laptop, and whenever I did, it says: "error (s) found: Code 800072EFE.» And every time I ask for help, it has nothing to do with this code.
  So I decided to install the update myself on the internet, but I can't find anything, and when I do. That's all for the 64-bit platform. I can't use these that I am using the 32-bit platform. Could someone help me with this please?
  Thank you very much

  And I do not get updated in my Windows Update program.

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/87f54f1a-1175-4c63-8838-7a56b9f3f3b6 >

  05/26 / 1111:59: 14 am

• error message... "error: no such partition." grub rescue

  In another thread by jj97403, he asked how to get a "error: no such partion" followed by "Grub rescue."  J W Stuart replied initially on August 16, 2010 with the fix for the problem. I have the same problem on my Vista laptop. I've never done a recovery disk before that happened. I have a version update for Vista Ultimate. Would this work?

  Hi Anthony,.

  1. What is the brand and model of the computer?

  2 are. what thread you referring?

  3. you have several operating systems such as Ubuntu installed in the computer?

  4. are you able to boot from the Vista desktop?

  5. when exactly you receive the error messages that you provided?

  6. what changes have you made in regards to the Vista operating system that has caused problems in the computer?

  Please provide us with more information to continue troubleshooting as a result.

  Thank you.

• My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  Hi you can try the following...

  Click on Start >
  Type in CMD > 
  Right-click on the result, and then click on run as administrator >
  Then type sfc/scannow , and then press ENTER.
  Reboot your PC and try it a few times.

  Download and install the update tool of the system for Vista (Windows Update hotfix)

  • Updated preparation system tool for Windows Vista (KB947821) [February 2012] 32-bit
  • System Update tool for Windows Vista for x 64 based systems (KB947821) [February 2012] 64-bit
  "This tool is being offered because an inconsistency was found in the maintenance shop windows which can prevent the installation of future updates and service packs software."

  Microsoft technical support suggestions:

  Configure the connection to obtain an IP address automatically

  1. Click on «Start», enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  2. Right-click on the network connection, and then click "Properties". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click Select "IP Version 6 (TCP/IPv6)" and then click "Properties".
  4. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  5. Click on 'OK '.
  6. Click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  7. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  8. Click on 'OK '.
  9. Restart the computer.

  Other Solutions for error 8024402F

  You can view these articles the Microsoft KB to fix the problem:

  • You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  • Code error Windows Update 80244016, 8024402f, or c80003fa
  • or see this thread

• kb953691and all updates fail with Error 8007000 b code

  I have a compaq presario pc sr5507f, all of the updates fail with Error 8007000 b code, when I start it up, he tells me that he don't find, msvcp71.dll, it will download internet 9 error code3715, it will be not to download microsoft lifecam 3.5 error, kb9953691, help help

  Hello

  You can check this link:

  Windows Update Error 8007000 b

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-8007000b

• When I try to extract from a CD, it begins to tear, but after about 20%, it is up to the error, but no code error

  original title: Help with Media Player

  I have problems with the Media Player.  When I try to extract from a CD, it begins to tear, but after about 20%, it is up to the error, but no code error.  Is it necessary to habve a network.  I have one and am wondering if I need or is it why extraction will not work?  I don't know where the network came, but if I need it how to remove it

  Hi Nanabarb,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the format of the files you are trying to extract?
  3. do you get an error message?
  4. the problem occurs with any particular drive?

  I suggest you to see the following links to make sure that the check-out settings correct. You don't have to be on the network.

  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Extract music from a CD
  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-from-a-CD

  Rip music: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-frequently-asked-questions

• Update for Windows Vista and receive error 80070490 & 643 codes; any ideas?

  Update for Windows Vista and receive error 80070490 & 643 codes; any ideas?

  80070490 = permission denied / [a problem initializing or using session variables] or item not found

  80070643 = ERROR_INSTALL_FAILURE

  http://support.Microsoft.com/kb/958044

• Error (s) found: Code C0000135

  Hi all

  I have windows Vista pack 2, when I try to update (Windows Live Essentials 2011 (KB2434419)

  It gives me this (error (s) found: Code C0000135)

  I went to the website to download this file (wlsetup - web.exe) updated otherwise, but when I try to run it, it gives me this meesage ([title = wlsetup - web.exe - Unable to locate component]-[body = this application has failed to start because wer.dll was not found])

  I downloaded this wer.dll file, but not the same error

  I tried to install all in a single file (wlsetup - all.exe), but the same error

  Please help and thank you all

  iemad

  Hello iemad,

  I suggest your run SFC/scannow to see if there is any corrupt system files.

  First of all, we run System File Checker to see if you have a corrupt file system.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Reboot your system.

  Now run the command chkdsk:
  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Please reply back and let us know if this can help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• im getting fatal system error and the code is cnu9363GKK thanks

  im getting fatal system error and the code is cnu9363GKK thanks

  Hello

  Enter: e9lofgfhss (3rd character is a lowercase L)

  Kind regards

  DP - K

• error 8024402 C code.

  My computer will not find windows updates and I get an error code of error 8024402 C code.  Can someone tell me why I get this and I need to do to get all my installed updates STILL ONLY be able to search for them?

  Windows 7 update problems? First read this.

  :)

• error: ShellExecuteEx failed: Code 5 access denied trying to uninstall a 3rd party program.

  I was using a 3rd party appointed Start Menu Pro 7.8 program & wanted to uninstall, I use CCleaner for the same purpose, but when I tried to uninstall the program I got an error: ShellExecuteEx failed: Code 5 access denied. I've never had this error before, so was not sure of the cause of it... so I would like to know the reason for the error.

  Thank you

  Run the program with admin rights:

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

  Code 5 - access denied means that you don't have permissions to run the programs with rights of sweat standard.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/