No IDE ATA/ATAPI

Similar Questions

• HP Pav HPE h8-1300z: LACK of CONTROLLERS IDE ATA/ATAPI!

  Recently I had to reformat my HARD drive using my HP OEM recovery disks. Now when I go into Device Manager, there is no registration for the ATA/ATAPI IDE controller. There is no UNKNOWN devices and there is no OTHER devices listed by eliminating this question. I feel I might need to re Flash my BIOS but there is no ads for this installation of support for my PC software it displays only a BIOS for another MoBo. I was hoping that the recovery disks would have an opportunity to re - install the drivers, but it seems he does only a comeplete OS re - install.

  Is there a way I can install the IDE ATA/ATAPI controllers without having to do a complete OS re - install?

  Your motherboard has a SATA controller and the connectors. There is no IDE connector on the motherboard Angelica2.

  Your PC card

  http://support.HP.com/us-en/product/HP-Pavilion-HPE-H8-desktop-PC-series/5258496/model/5261714/product-info

  

• How can I get updates for IDE ATA / ATAPI Controller for windows xp pro

  Where can I find drivers updates for IDE ATA / ATAPI Controllers for windows xp pro?

  These are usually Microsoft drivers, and they are as old as the hills, why do you need to update the drivers?  If the Microsoft drivers are not appropriate, then get the drivers from the manufacturer of the motherboard.

  John

• burner not found disk (itunes) IDE ATA/ATAPI driver and found subcomponents

  iTunes keeps popping up with not found disc burner. One of the help pages supposed to go on computer, right click / Manage / device driver / and find the IDE ATA/ATAPI and it wasn't there. so I checked it on my laptop which is windows too, but shows IDE ATA/ATAPI. What should I do now? What is my problem I-tunes?

  Hello

  Sometimes they have too many programs for CD/DVD (burning and reading) causes conflicts that can cause a
  strange as errors they are competing for resources. The problems of corruption and the system hardware could also
  also be at fault.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• IDE ATA/ATAPI controllers does not, unable to TRIM SSD

  I'm having a problem with my newly installed SSD. I just got an Alienware Aurora R4 with Windows 8. I immediately cloned the HDD to a vector of OCZ serving 256 GB drive of EaseUs ToDo Backup, which worked perfectly when I just upgraded to an SSD on my laptop. At the beginning I had a problem with recognition by car, but then ensured this bios was set to AHCI and UEFI and finally to load Windows 8. I reformatted the hard drive 2 TB for Data (d :)) and loaded all my music, videos etc..) Then when I went to optimize my readers, I clicked on the optimization of the DDI, and she went from needing optimization to "optimization is not available" - which it is said now and is gray. I realized that it is a question as optimization in Win 8 on an active SSD TRIM (works on my laptop).  Do not know if it is a matter of concern, but the (I'm sure that what is already hidden) partition DIAGS on the original drive received a drive letter (e :)) on the SSD.

  Anyway back to the no optimization/TRIM. My first reaction was to google "Value is not available" and I found this link.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-performance/when-i-try-to-optimize-drives-i-get-optimization/20a45c49-a774-42B1-8317-20ef7799b6ad

  The poster says he fixed his problem by updating its storage controller drivers. "Basically, I downloaded the latest drivers Intel Rapid Storage Technology for Windows 8."
  I checked my control of storage drivers in Device Manager, and these are listed:

  Intel (r) 600 Series chipset SATA AHCI controller
  Microsoft storage controller

  Read more in the article someone else with a similar problem mentioned tried using the admin command promp to activate the TRIM (what to me then tried and had the exact same message of error/result), with the following results:

  Type "defrag c:/l '.

  Coating invoking the name of the drive (C :)...)

  Lining: 100% full.

  The requested operation is not supported by the hardware of the volume. (0x8900002A)

  This individual, and then upgraded to Windows 8 and leaves choose drivers and apparently its has started working. He mentioned its IDE ATA/ATAPI Controller amended in both disk management. Reading that I decided to see what mine were and noticed that I have not yet to IDE ATA/ATAPI controller listed in disk management on my system! Even when the control to display hidden is not a controller to IDE ATA/ATAPI list. Should I do this?

  I went to the controller driver dell to check to see if I needed updates. It shows me only Windows 7 updates as it says that my R4 Aurora accompanies when I added my service code (is there a way to fix this?). I just chose to watch an empty Arurora R4 and was able to see the drivers of Windows 8 and downloaded all updates that seemed relevant (also update bios to A07 A06). When I downloaded the class Serial ATA driver (7D9TS) and you click Update, it says just the file is decompressed, but have not installed anywhere (unlike the other pilots).

  If anyone knows why I don't have IDE ATA/ATAPI listed and how to get this device?

  For those who have an SSD on their Aurora R4 with Win 8 are you able to optimize and what drivers you have this affect it?

  What are the latest drivers Intel Rapid Storage Technology for Windows 8 and how do I know if I have same Intel Rapid storage available?

  Thank you very much. Sorry the length, but I wanted to be as detailed as possible.

  SUTEKH

  I'm having a problem with my newly installed SSD. I just got an Alienware Aurora R4 with Windows 8. I immediately cloned the HDD to a vector of OCZ drive 256 GB using EaseUs ToDo Backup,

  I think that the problems started here, on this stage of EaseUs.

  I hope that you always have this original Image backup... probably on an external USB or something. Good... Keep this forever (especially since it looks like that delete you the original copy/drive).

  You have to clean install Win - 8 (and support adequate and other drivers chipset) this SSD so you can check the materials. It is not easy because of no victory-8 media and hidden serial OEM key. You may need to talk with Dell for some OEM DVD or USB Flash media.

  Personally, I would have also created the Dell 16 GB USB Flash device recovery initially. It might be useful now. He could have facilitated a full restore of your OEM-Windows-8... same "bare metal" (to your Virgin SSD).

• DRIVERS CONTROLLERS ATA/ATAPI IDE that I use windows 7 of the month last on a laptop HP PAVILION g7-1279dx

  Help

  Hi @stevewalters

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I saw your post about some kind of problem with the ATA/ATAPi IDE controller drivers. There is no specific drivers listed on the page of the driver for your model. Here is a third-party link that will show you how to upgrade your drivers from the Device Manager.

• DV6 - 6163cl: change of hard disk for laptop ide (ata) to Sata

  OK, I bought a hybrid of 1 TB HARD drive and it is a sata drive. I noticed that the 750 GB drive in my notebook is a disk Ide (ATA). How can I make the new sata drive works in this notebook? Or can I?

  Thank you.

  That's right, and your model may take a SATA III (6.0 GB/S) hard drive.

• Device USB ATA/ATAPI Bridge are representatives

  Mi Ordenador con windos 7 no me reconoce el USB ATA/ATAPI Bridge device

  Hi pepcas,

  Unfortunately, the community of Windows is able to provide support in English. The following URL will help you to receive support appropriate for your location information.

  Open the link and select your region from the drop-down list, and then click the arrow to continue.

  http://support.Microsoft.com/common/international.aspx

• Any way to get around the problem of compaibility ITE 8211 ATA/ATAPI

  Any way to get around the problem of compaibility ITE 8211 ATA/ATAPI

  Hi EwenWood,

  You want to know a way around the issue of compatibility ITE 8211 ATA/ATAPI. I will help you in this problem.

  According to the Windows 8 Compatibility Center, we have all the information available for ITE 8211 ATA/ATAPI. Click here to know more: http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=ITE%2B8211%2BATA%252fATAPI&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  I suggest you to contact the manufacturers of devices for updated drivers.

  I hope this helps.

• Documentation in conflict on IDE / ATA, who is he?

  Getting started with ESX, I read the following:

  http://pubs.vmware.com/vsphere-esx-4-1/getting_started/c_esx_hw.html:

  "ATA and IDE disks hard - ESX supports the installation and on an ATA or SATA RAID disk, but do ensure that your specific speed control is included in the hardware supported. IDE drives are supported for ESX installation and creation of VMFS. »

  And the Guide of the ESX Configuration, I read the following:

  http://pubs.vmware.com/vsphere-esx-4-1/server_config/c_local_storage.html:

  "Note: you cannot use drives IDE / ATA to store virtual machines."

  What is correct? Creation of a VMFS on an IDE drive / ATA means that you can store virtual machines on an IDE disk / ATA, correct?

  Thank you!

  The console ESX 4.x is actually a Virtual Machine, it is stored on a filesystem VMKFS. The Tunis should probably be amended to eliminate any confusion. Installation on IDE is not only being a good choice no mater what that.

• Cannot install Vista Business on Portege M400 - IDE issues

  Hi guys... I am looking for your help.

  I downloaded all the new Vista drivers avaiable from Toshiba in support of the new installation of Vista business on my old Portege M400, that came preloaded with a version of XP Tablet and kept their loan on a CD.

  I also upgraded the version of the ACPI BIOS to the latest available 3.80.

  I insert the first CD of Vista professional and do a boot. (I also have a n upgrade Vista Business CD but I want to do a clean install).
  I go past the first steps and choose Install.
  I am faced with an error message "no disk has been found. "Click on load a driver to provide a device for installing mass storage.

  Looks like Vista is not able to see the IDE drive to the edge and it's a driver problem.

  I touched the "Rescan" button available on the windows installation and another message appears: "no device drivers were found. Make sure that the installation media contains the correct driver, and then click OK. »

  Currently loaded on the XP: currently loaded poster IDE ATA/ATAPI controllers like Device Manager: "Intel (R) 82801 G (ICH7 Family) Ultra ATA Storage Controllers and primary IDE channel."

  Hard drives shown are: Toshiba RAID SCSI Disk Device LD0

  Pls tell, what new drivers since available downloads of drivers Vista for my model 400 ML PPM40E, should I choose here for my Vista installation recognizes the disk available?

  Hello

  It is very easy to solve this problem.
  If you would look on the page of the European driver Toshiba (Portege M400 section), then you will notice that a RAID driver is available for this model of laptop.

  Impossible to install Vista because it cannot find the HARD drive due to lack of RAID driver!

  You must install the RAID driver first and then you can proceed with the installation of Vista.
  As far as I know the Vista installation accepting the USB flash key you can use this key to include the RAID driver.

  Hope I could give some useful advice.

  Cheers mate

• Satellite S70 - A - 11: PSKNEE - error event ID 11 Atapi

  Hello

  I am constantly Atapi error (11 EvenID).
  I use Windows 7 and the S70 - A Satellite - 11 H PSKNEE-06P02TEN.

  Yesterday, I specifically re-installed windows to see if the problem is resolved, it has happened. I ran the Toolbox of the Intel SSD full of that diagnosis, she returned without a single error.

  And I made sure that I have the latest drivers, I've updated the bios, I did almost everything imaginable, but this error always keeps popping up and from time to time PC freezes, mouse movements, but nothing else answer then it thaws and new mistakes keep coming. Check the log of the events below.

  Very useful if you could help.

  Thank you in advance.

  Hello

  The Atapi (11 EvenID) error due to hardware problem.
  This problem may be caused by the controller or device that is connected to the controller.

  > I ran toolbox SSD Intel full of that diagnosis, she returned without a single error.
  You upgrade this laptop with an SSD?
  Have you noticed the problem using the previous HARD disk?

  Probably this SSD drive is causing this problem.
  I recommend you to check if the same error message using the original HARD disk.

  By the way: you can try to update the driver for the IDE ATA/ATAPI Controller
  In Device Manager, expand IDE ATA/ATAPI controllers.
  Right click on the controller and select Update driver software.
  Then restart laptop and check if this solves the problem.

• Satellite Pro M10: Cannot install SD-C2612 - device IDE hdc unknown

  Hello.

  My CD/DVD-Rom device (toshiba SD-C2612) stopped working - it was still registered as a player, but would not read disks - so I got a replacement and not at all settled.

  I also noticed that in device - under IDE ATA/ATAPI controllers Manager - there is an "unknown device" which is called "hdc" (hard disk controller?) who doesn't have a driver installed and can not find new drivers when I update. I disabled the device and who have stopped the old cd/dvd rom recognized and when I reboot it reinstalls the hdc, but it's still the record as an unknown device.

  Any ideas?

  Thanks in advance

  Hello

  It seems that you have purchased an internal drive is not compatible.
  It should know that the drive as master/slave or c - salt settings are fix and it of not possible to change it as on external drives by switching the jumper.

  That is why it s always a good idea to ask the laptop manufacture support for a good disks before you buy a.
  I found in my user manual for the list of compatible drives for my laptop. Maybe it s the same list in you user manual.
  There you should find the readers supported.

• HP G50-109NR: IDE to AHCI Controller

  Hello

  I just replaced the WD 120 GB with a SSD Samsung 850 EVO ATA hard drive for my laptop G50-109NR. Is there a way to change the IDE ATA/ATAPI controllers?

  Thank you

  Sammy

  Sammy20 wrote:
  

  Hello

  I just replaced the WD 120 GB with a SSD Samsung 850 EVO ATA hard drive for my laptop G50-109NR. Is there a way to change the IDE ATA/ATAPI controllers?

  Thank you

  Sammy

  The parameter if you have this option from the IDE to the setting of DCIS is inside the BIOS Setup. If you do not have the option in the BIOS of the drive then you have only IDE setting.

• How to re install the IDE controllers?

  I actually when I put any CD or DVD on my laptop it will slow down just at the moment when I opened my computer to check if its connected or not, and at least his deon can't connect, or my windows can read and when startup too because when the DVD inside the laptop its is not starting , but when I take wide windows suddenly start normally, I looked for a solution and I found this one on curtis:

  Open the Manager of device on your PC.
  
  Uninstall your two located under IDE controllers IDE channels.
  
  Reboot, let windows re install the IDE controllers and all should be good.

  And everyone was saying of his work, but I don't know how to do!
  
  Help, please!
  
  "" I need the DVD to repair my windows 7, bad ".
  
  .. .and at least it is not connected!
  
  

  Hello Mazinho.  I understand that you're curious how uninstall/reinstall your IDE controllers.
  
  I assume you are using Windows 8 based on your screenshot.  The steps should be similar for other versions of Windows as well.  Try the following.

  1. Using views of the subway or Office Windows + X key combination.  This opens the context menu.
  2. Select Device Manager.
  3. Expand the section of "controllers IDE ATA/ATAPI.
  4. Right click on "IDE controller' listed here and select"Uninstall ".  If you are prompted only remove the driver.
  5. Reboot the laptop.
  6. Loading Windows must be reinstalled the software for the device.

  If you have additional questions, do not hesitate to ask.  I wish you a great afternoon!