No installation of Magic Mouse 2 shows no green light when it is plugged

Similar Questions

• Magic Mouse 2: open hole, no light

  I just bought a Magic Mouse 2.  Right next to the power switch on the bottom, there is an opening. I guess it's the sensor. On my mouse, it is not lit, and there is no cover, just a hole opened.  Is it the way it is supposed to be?  Without light and without coverage?

  Yes, it's as expected.

• How to solve my Time Capsule that does not show a green light?

  Installed my Time Capsule in a new home. My service is xfinity that has WiFi built into the modem. Time Capsule also has active WiFi. The two WiFi options work perfectly. However, my Time Capsule shows a light yellow rather than green light, so I know that something is wrong with the system. I disconnected Time Capsule and restarted - does not solve the problem. What is the Protocol for troubleshooting to solve the problem?

  You have to open the summary in airport utility page... It is enough to click the icon of the TC and read the problem in the list.

  for example

  

  Tell us what each question is and we can help you to solve this... but if you click on each of them will be offered a cure... or you can ignore the error.

• Devices drivers not showing no not after its installation. How can I show different pilot locations when looking at a workstation?

  I installed a hard drive of 250 GB and once he showed me that it is installed and that the device is administrable via Control Panel, it cannot be opened or read when you browse the file directory. How he finds out, open it and browse to the location of the devce driver if she does not?

  Hi Anderson5903,

  1. What is the brand and model of the hard drive?
  2. How is the 250 GB drive connected, it's via the USB port or internal drive?
  3. it worked on other computers?
        
  See the links below for help on Device Manager.
          
  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager
             
  What is Device Manager?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-Device-Manager 
                
  I also suggest you to check in the disk management for the hard drive and also check if it has a drive letter assigned, if the drive letter is not assigned, then you can assign a drive letter and check the issue.
            
  To change drive letter assignments in Windows 7, follow these steps:
                
  a. log in the computer as an administrator.
  b. Insert a disk in the removable drive.
  c. Click Start, right-click computer and then click on manage.
  d. click on disk management.
  e. right-click the partition, logical drive or volume that you want to change and then click on change drive letter and paths.
  f. click on the removable drive, click it, click on change, click the drive letter that you want to use, and then click OK.
          
  For more information, visit this link below:
            
  Change, add, or remove a drive letter
  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• No green light magic mouse 2

  Computer does not respond to the mouse.

  No green light when I turn on the mouse.

  Mm2 has no green light on this subject. Check if it's loaded. Use a USB mouse you can configure the MM2 to pair up with your computer using BlueTooth preferences. Be sure to slide the power switch on the market - you should see green on the slide.

  The keyboard has a very small and hard to spot, On / Off switch on the rear of the keyboard. Don't forget it's on.

• Magic Mouse 2 is not scrolling

  I just bought a Magic Mouse 2, and when I drag my fingers on it as indicated to scroll, it does not scroll vertically or horizontally. I read the instructions, watched videos... nothing. Check the settings and everything. Please help me fix it!

  Hi there sepowers51409,

  Looks like your Magic Mouse 2 is not all scrolling when you drag a single finger upwards or downwards at the top of the mouse. First, I would check to see if, perhaps, the scrolling speed is set at a minimum, which could make it appear as if the scrolling does not work.

  Change the way your mouse works

  You have another computer to test with to help us to isolate and fix the problem? Don't forget to UN-pair he from the current computer if you do, so that it didn't is no complications when you test.

  If you want to remove (désapparier) a device from the list of devices on your Mac, follow these steps:

  1. Choose the Apple menu > System Preferences, and then click Bluetooth.
  2. Place the pointer on the device you want to remove, and then click the button which appears next to the device name.

  From: using a Bluetooth mouse, keyboard or trackpad with your Mac

  If you do not have another Mac to test this then I would be:

  1 UN-pair the mouse with the above steps

  2 remove the batteries

  3 reset the PRAM on your computer

  4. replace the batteries in the mouse

  5 pairing and testing new scrolling.

  If the problem persists can create a new admin user or test this point to another user, you may have on the computer?

  OS X El Capitan: set up users on your Mac.

  Thank you for using communities of Apple Support, let us know how it goes!

• Magic mouse 2 not showing all preferences.

  Hello people, I had my magic mouse 2 now for about 2 months, but have always failed to scroll right I don't see not all preferences. I only get the option of tracking speed and double-click speed.

  I have the latest version of the software updated on my mac, etc.

  See I don't get the options for 'Scroll and zoom' etc.

  Please help me and thank you in advance.

  Can you re - check the version number of your OS.   With the magic mouse 2 you must have the El Capitan 10.11.5.   I use this but my magic mouse in system preferences is different, as you can see.

• Magic Mouse connected but no display on screen pointer

  Just pass on my iMac and Magic Mouse and not even connected. Mouse as connected but shows there is no pointer arrow on the screen. Please notify. If the mouse is broken how can I shut down the computer?

  What happens when you connect a USB mouse, if you don't please borrow or buy one, they are very cheap.

  Also, did you follow the troubleshooting steps in https://support.apple.com/en-us/HT204621

• Magic Mouse 2 connect only with basic functions

  I bought a new mouse Magic 2 within 5 years, one packed and thought the option cooldown better to replace the batteries. He connects to his macbook with bluetooth fine but only has the basic movement and click functions, properties of the mouse only shows base none of the magic mouse functions. I connect to my macbook, and all right, slide, tap twice etc. Question is how to operate on the other macbook when its old mouse was working well until he fell.

  The other Macbook on El Capitan, the Magic Mouse 2 is compatible with El Capitan and beyond.

• Magic Mouse Gestures of 2 does not

  Just bought a new Magic Mouse 2 and I can not get the options of "gestures more" appears for the new MM2 or "Point and click on.  As a result, cannot scroll or switch between applications.  Make a right click seems to work on its own, however.

  As soon as I reconnect my old magic mouse, everything to return to the menu options.

  I tried almost all the options to remove my old mouse completely and by adding a new to see if there was a conflict between the two.  However, the old mouse shows all options, but does not.

  Here are the only options I have for the new Magic Mouse:
  

  Help!

  Hi chmilestogo,

  Thank you for using communities Support from Apple! I'm sorry to hear you're having these problems with your Magic Mouse 2 and your iMac. If you experience unexpected mouse behavior (in this case, do not show the preference options), you can find information and troubleshooting described in the following articles useful:

  Configure your Apple - Apple Support wireless devices

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected - Apple Support

  Also, I'm not clear if the config at the bottom of your post info is up-to-date, but you can make sure that you are not yet under rated beta of El Cap:

  Beta Apple software program

  Concerning

• my magic mouse suddenly stopped scrolling in pages

  While editing a long document into pages my magic mouse suddenly stopped scrolling.

  I have looked on various online forums and found no solution.

  I checked my setting and preferences, but found nothing changed.

  It scrolls up and down allows very well on the Internet pages and in number and even get out of my folder in the Finder.

  I tried other folders and documents in Pages and the mouse does not scroll.

  It shows that 35% battery life and I think, if she was too weak, do not work on anything.

  I did something wrong?

  I'm fairly new to Mac and perhaps I accidentally pressed a combination of keys for my editing.

  I hope someone out there can tell me how to solve this problem.

  I had to resort to using the arrows up and down!

  And my mouse scrolls quite happy in this question paper.

  Well, I'll answer myself that I see no way to change the message.

  I checked again on the Internet and came up with a site that said I had to change things for my mouse or trackpad (don't have to make one of these!) accessibility. I wasn't click the scrolling speed and the arrow to 'faster' (he was placed in the middle of the speed bar).

  I then chose one of my documents Pages, and to my amazement, found that I could scroll through once again with the mouse!

  While that's fine I can continue once editing, I would still know WHY it is suddenly stopped and WHY he started working so I changed the speed of scrolling.

  All responses are welcome.

  If I hit a key by chance combination that has stop working in the Pages, then I would like to know so that I don't make this mistake once again if in fact I did a mistake.

• Magic Mouse 2 * new * does not work

  New macbook and new magic mouse 2 but I can't connect via usb or bluetooth, I tried to restart the two and wait for it to load. literally, I don't know where to go from here. need help! Save me

  Note: Magic Mouse2 cannot be used when you are connected to his cable.

  • Setting up your Apple - Apple Support wireless devices

  Follow these steps to configure your Magic Mouse 2, Magic Keyboard or Magic Trackpad 2:

  1. Connect the lightning to the USB cable to the port of lightning on the device and
  2. the other end of the cable to your Mac.
  3. Make sure the switch is in position I. (Green will be visible).
  4. The device appears in the Bluetooth preferences and automatically pairs with your Mac.
  5. The Bluetooth Preferences window indicates the level of status and connection fees of
  6. your device. When the device is charged, unplug it for wireless use.

  There are several opinions and comments about magic Mouse2

  http://www.Apple.com/shop/reviews/MLA02LL/A/magic-mouse-2

  also you might feel free to contribute to them, but also to comment

  Apple feedback • comments support • return of products

  Among the comments, are issues of the user that may or may not help you

  make the best diagnosis of your installation + user experience problem.

  If your product (MM2) is the Thunderbolt port, as it should, it may

  not being able to associate as some suggest it can, through the use of the USB port. Since

  This is not a. The port of loading may or may not be useful to attach

  mouse to the computer during the initial installation; to see if it is recognized.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • IPod, Mac and iPad US technical support:
  • (800) APL - CARE (800-275-2273)

  You can find it does not help. Or can the gremlin inside the MM2

  self-pity and decide whether to allow a connection in any case. Say what? Please?

  If the mouse was purchased directly from Apple (official, store or online)

  You should have 14 days to return the product. An Apple Store

  Genius can be useful in practice to troubleshoot or to help set up a mouse.

  My mouse are USB & all fasteners; they can't run away + I of good spare parts.

  Sorry your mouse is pointing upwards. I give a talk, no uncertain words.

  Good luck in this case!

• Can not switch to OSX Recovery Mode: looking for the keyboard and magic mouse

  I'm trying to reset my end 2012 Mac Mini 2.3GHz/i7/16GB to factory settings to try to get the machine a new lease on life.

  However, when I try to enter in Recovery Mode (in now command ⌘ + R when the system starts up), the machine will stop to a screen showing the instructions to turn on a magical keyboard and Magic Mouse.

  I have a trendy apple (USB) keyboard and a USB mouse is connected.

  How can I activate these entries, or how can I pass this screen looking for a keyboard/Magic Magic Mouse?

  [I guess one option is to use a magic mouse or a magical keyboard - I have in my office - but it is not sensible that you need them to access recovery mode].

  Thank you

  Got my Magic Mouse of the office, got into recovery mode. Surprised, you need a Magic Mouse, and who does not have a USB mouse to the recovery mode!

• Magic mouse does not work

  I just bought a new magic mouse. I am connected and it works well. My only problem is that does not scroll. I went into System Preferences and there are no options for scrolling. I've updated my OS X El Caption about a month ago so everything is up-to-date. Any suggestions?

  Maybe scrolling is disabled in the accessibility settings somehow?

  System Preferences > accessibility > mouse and Trackpad > mouse Options

  Make sure "Scrolling" is checked.

  Set the double-click and scrolling speed of your mouse or trackpad - Apple Support

  In addition, when you open System Preferences > mouse, does show options for your Magic Mouse mouse, or should we say no device found?

• No magic mouse preference 2

  I have associated my magic mouse 2 successfully, but it appears like a mouse to single button with any of the preferences it should show.  What I've done wrong?

  You need El Capitan (OS X 10.11.3)