'No Internet access' after reboot, but OK after cold start.
My system has been restarted after a recent update of Windows, and although the Internet connection worked the status icon in the system tray showed the yellow triangle and "No Internet access." The State of the network has been "Identification." (This is a wired connection). When I tried to restart, shutdown took a lot of time and the system blue screened.
When I started the system again, it worked OK. However, at each reboot later, I have the same problem and after each cold start, it's OK. On subsequent reboots, I notice that the Internet connection ends, and then returns to identify, even if the connection actually works.
What is a next step of troubleshooting?
Hello kwdavids,
Tags: Windows
Similar Questions
-
No Internet access after restart on Windows 7
Hey,.
I have a HP Pavilion Dv6 with an Atheros AR9285 wifi adapter and it originally had windows vista installed. I just upgraded to windows 7 is a complete and the first format was fine, I could connect to the internet. After restarting my computer, I started to have problems of WiFi, it says I am connected to my router, but the network is unknown and there is no internet access. I am able to connect to the internet on the same router using my phone, my samsung laptop and none of my roommates have had this problem.
After much research on google and search through discussions, I found that a lot of people have had this problem, but none of their solution worked for me.
That's what I tried:
- I have uninstalled and reinstalled my network card
- I've disabled Hello, then went as far as uninstalling itunes
- I have reset the TCP/IP stack
- I do not have Metacaff
- I don't have the service # Id_string (bunch of numbers)
- I put my default gateway at the same address as my samsung that connects to the internet
- I put my IP as shown in the following solution addresses
IP address of 192.168.1.65 (does not etre.65)
Subnet mask: 255.255.255.0
Default gateway: listed on the bottom of your router's default IP address (for me: 192.168.1.254)
-Click OK
I does not require a reboot, you may need to.
Nothing seems to work, so any ideas would be much appreciated!
Original title: unidentified network / no Internet access after don't Reboot under Windows 7
Hello
1 did you do changes on the computer before the show?
I suggest that you try the procedure described in the article below.
Method 1:
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7Method 2:
Wireless and wired network problems
http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1I hope this helps to solve the problem. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.
-
I recently bought a thread to get a wireless connection after you plug the usb driver proceeded to create a connectin wireless, then asked to type in the security encrypted code that did got a connection but said auto and not Internet, but bars are high and shows a connection, I hope that I have been specific with the problem iam having.another thing on my laptop I have access to the internet and typed in the security key on the back of my modem... Tenda is the name of the usb driver.
original title: no internet accessHello
Are you binder to share internet from your laptop or your internet provider cable is connected to this wireless USB dongle / device?
If you share internet by connecting this USB to a computer, you will need to share internet on this computer.
You must enable "Internet connection sharing", click on Start menu-> network connections-> right click on the connection to the LAN-> select properties-> click on the tab 'Advanced'-> Tickmark 'allow other users to connect through this connection to computers.
I hope this helps.
-
No Internet access after the connection of the cisco vpn client
Hi Experts,
Please check below config.the problem is vpn is connected but no internet access
on the computer after the vpn connection
ASA Version 8.0 (2)
!
ciscoasa hostname
activate 8Ry2YjIyt7RRXU24 encrypted password
names of
!
interface Ethernet0/0
nameif outside
security-level 0
IP 192.168.10.10 255.255.255.0
!
interface Ethernet0/1
nameif inside
security-level 100
IP 192.168.14.12 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
!
2KFQnbNIdI.2KYOU encrypted passwd
passive FTP mode
standard access list dubai_splitTunnelAcl allow 192.168.14.0 255.255.255.0
INSIDE_nat0_outbound list of allowed ip extended access all 192.168.14.240 255.255.2
55.240
pager lines 24
Within 1500 MTU
Outside 1500 MTU
IP local pool testpool 192.168.14.240 - 192.168.14.250
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access INSIDE_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 192.168.10.12 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.14.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac setFirstSet
Crypto-map dynamic dyn1 1 set transform-set setFirstSet
Crypto-map dynamic dyn1 1jeu reverse-road
dynamic mymap 1 dyn1 ipsec-isakmp crypto map
mymap outside crypto map interface
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 43200
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
password encrypted user testuser IqY6lTColo8VIF24 name
username password khans X5bLOVudYKsK1JS / encrypted privilege 15
tunnel-group mphone type remote access
tunnel-group mphone General attributes
address testpool pool
tunnel-group ipsec-attributes mphone
pre-shared-key *.
context of prompt hostname
Cryptochecksum:059363cdf78583da4e3324e8dfcefbf0
: end
ciscoasa #.Hello
Large. Try adding the below to make it work
vpn-sheep access list extended permits all ip 192.168.15.0 255.255.255.0
NAT (inside) 0-list of access vpn-sheep
Harish
-
Disabled Internet access after you apply the updates of Windows
After you have installed the latest Windows updates, I lose all connection to the Internet. I can still see my network, but not do anything on the internet.
I spent an hour yesterday on the phone with my ISP check it was their system, not a hardware problem with my modem or router. I spend another 1/2 hour on the phone with Dell technical support.
It turns out the issue was my DNS has been altered, and the only way to recover was to perform a restore of the system for 8/16. Everything was going well after that... until Windows Update automatically ran last night, install the last two so-called critical updates. I don't know what is causing the problem, but my DNS was wiped out again, and I had again back 8/16 recovery point.
I disabled Windows Update for the moment because I don't know how else to solve the problem; in the absence of any change to my system, I suspect it's updates are something to my DNS. Does anyone else have this problem? Is there a better solution or another way to solve the issue that doesn't require me avoid all Windows updates in the foreseeable future? Is there a way to know if/when a later critical update solves the problem created by these?
The cause has now been identified as McAfee updates and no Windows updates - they were both released at the same time. If one of your PCs have McAfee so that they might be confusing your test results.
See the communication from this "criticism" - McAfee
You should make the fix McAfee, if necessary. The McAfee link applies to consumer products but there are corresponding communications for businesses - see, for example,.
Corporate KnowledgeBase - DAT-6807/6808 causing problems with VSE 8.8.x
I have McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, as ads from McAfee have said since then, the application did not refer to his database of threats correctly [so, eventually, the variation in the degree of severity in the user experience]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].
I had to run the McAfee Development removal a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat
- - - - - - - - - - - - -
If you do not have McAfee then Windows update that kb2705219 could be another cause that uninstalling that appeared to solve the problem for some users. But, personally, I think they could only reached a temporary fix [I thought my PC was OK at the time, but it turns out does not do the trick, as explained above] to uninstall an update - panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.
-
No Internet access in guest, but don't have LAN access
VMware virtual server 2 =
Host = Windows 7
Comments = Windows Vista
Virtual network = bridge
Can access LAN.
Can even ping Google.com and cmd nslookup google.com
But... IE browser gets no Internet access.
Any ideas?
Thank you!
Welcome to the community,
This looks like a firewall or a problem AV. try to temporarily disable any AV and firewall on the Windows 7 host.
André
-
VPN connected to Pix but no Internet access after login
Hello
We just changed on our firewall in a Pix 515. The VPN Client (4.6) was set up and remote users can connect ok, and authenticate with IAS in Windows. However, once that they connect to the VPN they can't surf the internet. Our support company say that this is impossible because it can cause the usurpation. Is - this really impossible on the Pix? Is it possible that the remote user can surf the internet through their local connection when it is connected to the VPN?
Thank you very much for looking.
PJ.
Hello
It is possible to connect via the client VPN Cisco to keep internet usage. You must use what is called the split tunneling. Below you will find a link how to set up the split tunneling:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080702999.shtml
Hope this helps,
Enjoy your hand,
Kind regards
-
Vista wireless loses Internet access after the mode "Eve".
Environment:
HP Pavilion dv2610ca notebook PC, broadcom 802. 11 b / g adapter, Vista Home Premium 32 bit SP2, Siemens Gigaset SE567 router/modem.Problem:
I can usually connect wirelessly to my home network and to the Internet whenever I start my computer. However, I have close the lid and leave it in standby mode, I can't access Internet after I opened the lid and the system wakes up. The system connects to my home network but cannot access the Internet. It shows a Local access only.Diagnosis and repair fails generally, telling me that I have a problem with my router. Disconnect, then reconnect usually works. My router power market also works.
I saw lots and lots of issues with Vista wireless networks and I followed several of the recommended actions:
-updated the driver broadcom
-reset the IP stack by using the tool "Fixit" of Microsoft
-disabled the use of IPv6 in two by disabling the check marks in the related devices and changing the registry TCPIP6 parameters
-modified the registry to activate/disable the DHCP broadcast flag in the TCPIP Interfaces
-J' tell the system not to disable the card Broadcom, but the "Power management" tab mentioned in some articles does not appear in its properties. The only reference to power is "Minimum energy" under the "Advanced" tab, then I disabled who.Nothing has solved the problem.
Has anyone else had this problem and fixed it?
I'm not a technical Wizard, so please provide instructions for any action that you suggest.
Thank you.
I replaced the Siemens router/modem provided by my ISP (Telus) with an old D-Link router and separate modem 3Comm I had been using a couple of years and the problem seems to have disappeared.
I'll close this thread on the assumption that the problem will not rear its ugly head again.
-
No Internet access after the update from Windows 7
Since the update of Windows 7 (from my list of update I can not single out one specific) sent 15 Dec - my computer will access my internet connection - the only way that I can access is to do a system restore to a point to Dec. 14 or before - I have a new computer - and no new programs have been added to the system during this time - it becomes troublesom because I have to constantly to do system restore to get online
I called Support Center, Monday - and after having him work for almost 2 hours, we decided that the KB2467659 update is the culprit and we have disabled this update to be installed - HOWEVER the windows update program was H - LL BENT on installing this update - the technician called me back 2 days later Wednesday--and we did other things magic to ensure that this implementation to day has NOT been installed again - so far (knock wood) No recurrences of the problems
-
lost internet access after the connection to the server
Have had this problem in the past and in the hope that a workaround is available.
MAC OS X El Capitan worm 10.11.2 runs and loses the Internet when connected to a server/sharedrive(on Microsoft Windows environment).
You asked the same thing, or a similar, issue in October 2014. What happened after that?
-
Satellite L300 (PSLB9A) - no internet access after installing the Vista SP2
Just upgraded my Vista with Service Pack 2 and found that I can not connect to internet sites, have proved SP2 by rstoring to before SP2 and everything is OK, also reloaded the OS with my recovery disks and everything works OK... to - what I load SP2 then when I try to access the internet, I can't , get "IE cannot display the webpage".
Diagnosis don't report any problems found. This happens with IE7 or IE8, the firewall is off and I can reach any network device, including my server but I am unable to load the web server page, same problem...
Any help would be appreciated.
Pete
Hello
I googled a bit and found a lot of people who reported on the same issue.
It s certainly related to Vista SP2.
You said you used Internet Explorer, I think you should test this also using other browsers like Firefox, Opera, etc. -
No Internet access after you have copied the user files on.
I created a new user account and copied all the files including documents and settings from an old user account. Before I did I unhid all hidden files and system files. What I was expecting, it was the new user account should behave exactly like the old user account without problem outside the difference between user account names.
However, after doing this I couldn't Internet new user even account I could ping all web Internet sites I've tried. Finally, I have to create another user account and copy only the document and manually I have to redo all the personal settings.
If the problems were gone. However, I would like to know if it is a problem to copy personal settings. What is the most efficient and effective way to transfer the account from one to the other?
Hello
Did you remove the following files on the new account?
- Ntuser.dat
- Ntuser.dat.log
- Ntuser.ini
http://support.Microsoft.com/kb/811151/en-GB
The link above shows how to copy a profile, however as far as the most effective way of copying, it depends on what you want, that is to say some parameters can be set for all users of the computer local strategies etc. If you want documents available to all users, use an all the "users share" with the permissions to prevent some accounts, editing files. This may or may not be what you want to achieve.
Please confirm what data/files/personal etc settings you want to duplicate to the new user accounts, and state what - this time when creating or on an ongoing basis.
Finally you use XP Home or Professional?
-
No Internet access after making back 10 of Windows to Windows 7
I switched to Windows 7, I hated Windows 10 for several reasons, now I can't access the internet, even though it says I am connected... I just had to spend a lot of money a few months since my computer crashed, and I can't afford to pay all over again. Don't know what Windows deleted 10 back to Windows 7, but I'm only borrow this computer to try to understand what I have to do. Microsoft does not seem to have phone numbers that I can find to call. Any help would be greatly appreciated.
[Original title: back to Windows 7 from Windows 10]
Thank you Don! I don't know what stage it was, but I answer from my office! Thank you very much for your help.
Glad that one of the procedures has solved the problem. Thanks for the comments.
Don
-
Satellite A100-386: no internet access after the new XP installation
Hi everyvody!
I can do it myself, so I ask for your help!
I have a Toshiba Satellite A100-386 with windows XP MCE.
I recently had a virus, so I formatted my drive. I don't have the installation CD with me, so I install XP.
I have two disc on my computer with the system and the other with the documents.
Then I install ALL the drivers I could find on the Toshiba site for my computer.
This means that the PSAA9E. The problem is that I have no internet! I don't understand why.When I look in computer management, I have no ethernet, controller mass storage controller and network controller.
I have zone alarm as a firewall and an antivirus avast!I disabled avast to be sure that he's not in it but no result...
In Thoshiba drivers there is also something to update the BIOS.
I did it but I didn't change. I hope the problem here not there...It will be really nice to help me ^^
Hello
I think that you just have not installed the right driver LAN and WLan driver
As much as I know this laptop supports Intel Pro 100 Lan and WiFi Intel 3945ABG card card
Please visit the European driver Toshiba page again and download the compatible network driver and the driver WLan.
Unpack the packages, then install it.Finally check again if the LAN and WLan cards were recognized in the Device Manager in network adapters.
Good bye
-
loss of internet access after you download updates from microsoft
Last night, I got 21 microsoft updates and have been installed just before turning off my computer. This morning, I had no access to the internet and I had to restore the computer to the past with the help of the assistance service. Tonight as I was closing, I received the same 21 updates and I'm having the same problem. What can be done to prevent this
Try to avoid the installation of the hardware updates next time.
Hide the Windows 7 updates that you don ' t Want never to install
Maybe you are looking for
-
I don't really know why, but my mac mail tells me that I have not read-1 messages, using a badge on the dock. This happens quite often if I restart mail - to solve another problem, my sidebar showing a message unread, when I have no unread messages.
-
Contact ID is working but saying it's the wrong finger
Hello! I need your help because I was in a meeting and I turned the my iPhone 6 s broad so that you have to press the Tower of button for a long time to restart. Thus ended the meeting and I went home, but I forgot my phone it was quite late so I wan
-
Mobile Garage to the trash band
If I move the Garage Band to the trash to uninstall will win the most space on my hard drive? I don't want to trash something that the MacBook needs to work properly.
-
How do some Ubuntu Firefox visual components resemble Windows Firefox components.
I would like to know how to make some of the components visuals (such as buttons for groups of tabs, flow, etc.) in Ubuntu Firefox look like the equivelants of Windows.Certainly, I could live with the look of Ubuntu, but I prefer the look of Windows.
-
I noticed recently that my Time Capsule, Apple stopped Airport, my backup files. I tried to connect again using time machine with no luck. In addition, cannot access the additional drive connected to my time capsule. In addition, my air-printing c