No internet access when you're connected to my wireless router

I have a laptop Compaq Presario CQ62

OS: Windows 7 64-bit,

Processor: AMD V120 processor 2.20 GHz

Network adapter: Broadcom 4313 802.11b/g/n and Microsoft Virtual WiFi Miniport

A month ago, I was using internet and then it suddenly stopped working. I am connected to the wireless connection, but there is no Internet access. I tried to leave the network and joining, turn off the router for 5 minutes, but nothing seems to work. What can I do?

Keiron Wilce

Thanks for all the help guys, but it seems that my anti-virus just need to update that was made by another computer and do pass through a pen-drive. Once again thank you for all the help.

Tags: Notebooks

Similar Questions

  • No internet access when it is connected to the modem

    HI I have an Ethernet cable modem BEFMCU10 model v3 connected to a Netgear n100 v2 wireless router. The modem works only when it is connected with the wireless router. When I try to connect Ethernet. Modem to PC, it does not connect, there is no internet access. My ISP is Comcast (Xfinity). It's really weird because how is it possible that theres internet via wireless, but when I connect my modem via Ethernet, I have no internet access

    I remember the first time I activated my modem there is xfinity software that did something to my modem but I don't think it has to do with anything he just install something in my laptop. I did a clean install of the software or anything has been removed.

    > Sometimes I download things and I prefer to use the physical connection because its faster.

    You will get the same benefits and an easier time using a wired connection to your router, rather than the modem.

    > My prolem is resolved, I followed your instructions, thank you

    You are welcome. Please mark as replied to close the issue.

    > is - this quite useful to purchase a Docsis 3.0 modem

    You can check this with your cable provider, but probably not.  Unless you have a very high speed (usually of company type) cable plan there would be no advantage.   You also must be sure that any modem you purchase is compatible.

  • Internet goes when you are connected to wifi

    Bought an iMac on eBay this week, works fine apart from a problem I encounter with internet stall, which really starts to get boring!

    It's an iMac, mid-2011, with OS X el Capitan 10.11.3 installed and put to update to the most recent update.

    The question...

    When you are connected to our home network (Sky Broadband) I get internet access for 5 minutes for an hour then stop him internet but the wifi is connected. At this point if I check all other computers/phones/tablets on the network that they are all still connected to the internet with absolutely no problem.

    The temporary solution...

    If I disable the wifi on my iMac and then back on again once it reconnects immediately and internet works fine still a time - until it stops!

    What I tried...

    Restart the mac repeatedly

    Restarted the router again

    In network settings, advanced on the mac, I renewed the DHCP lease (loads of times - note it always seems to come back with exactly the same ip address - I guess it's good?), updated the DNS (last post I read said to use 2.4.4.2 so am currently on that), tried to manually set the MTU to 1453, I deleted all the other networks stored outside my home network Too much.

    Does anyone have any suggestions please for all messages that have worked for them, or things that I could try?

    Thanks a lot for your help

    Joe

    Did you erase the internal drive and install OS X yourself? Did you run the hardware test? If this isn't the case, please do both.

  • Office Pavilion Elite e9220y: name of the Internet access when you hover over said tskbr network 5. is that HP name or co cable. ?

    Hello

    I have a desktop Pavilion Elite e9220y Home Premium; Win 7; 64-bit computer.

    I'm wired; but have wireless for other things (Kindle, etc..)

    When I open internet access in the bar of tasks and under the "wireless network connection", I see MY connection (and the name I gave my connection) and 5 solid green bars (no problem).

    Above this section, there is an article with a picture of a House (provided by HP, I'm sure), and he says:

    ' Currently logged on:

    and just below it says: (to the right of the photo of the House) network 5

    and just below it says: internet access

    That's all it lists the wireless network connection with my name and the names of other connections in the district.

    My question:

    the name "network 5"?

    HP says it is my cable provider; my cable provider says it's at HP.

    This can be changed?

    Thank you!

    Hello Denise,.

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I understand that you have a problem with wireless networks.

    Windows will think it's in a new network whenever it detects a new router. If you have changed your router or the router configuration. Windows creates a new network. But do not worry.

    If you don't want the name of the connection to be listed under active connection, follow the steps.

    (1) open the "Control Panel".

    (2) select and open "network and sharing Center."

    (3) click on the ' icon "(une icône de la maison pour moi) less 'show your active networks'.". " This will open the dialogue "set network properties." Here, you can rename a network connection or a change as the network connection icon.

    4) click on "Merge or delete network locations" to view the list of network connections that are stored. You can merge or remove connections

    Let me know if it helps.

    Have a great day!

  • How to grant local LAN access when you are connected via a central-site

    I know how to activate the local LAN access in the properties for the client connection, but I don't know how to allow access to the central site

    Central site is a CISCO 1721 with module as well as IOS IPSEC VPN

    tanks for any help

    Hello

    This feature is only supported when you connect to a VPN3K box, its not available for PIX/IOS as a vpn server, allowing it on the client-side custom has no effect when you connect to a server of PIX/IOS.

    THX

    AFAQ

  • my computer dell laptop was connected to my wireless router, and now the connection is broken ittslef

    I have 2 computers connected to my router wireless #1 is a new satellite Toshiba 2010 and has no problem connecting...

    #2 is a an old dell Latittude D 520...

    It was working fine and connection with a problem and now does not connect to the network...

    I tried the WiFi wireless lan utility Dell and MS WZC... without success...

    The network is no more be authenticated...

    And it does not acquire the network address...

    When I select the icon for network address, which was there before. is now defunct.

    My icon Dell said acquiring and my router icon indicates authentication...

    Then, login unavailable...

    Hello

    ·         You receive an error message or error code?

    ·         What service pack is installed on your computer?

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: I suggest you read the article knowledge base Microsoft and check below.

    How to troubleshoot wireless network connections in Windows XP Service Pack 2

    http://support.Microsoft.com/kb/870702

     

    Method 2: You can also read the article and check if you can connect to the wireless router.

     

    You cannot connect to a wireless network access point that uses authentication shared from a Windows XP-based computer or a Tablet PC Windows XP Tablet PC 2005 Edition

    http://support.Microsoft.com/kb/884787

    Let us know if that helps.

  • the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I am disconnected and then reconnected___

    the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I disconnected and then reconnected.

    I just ran windows update on a large number of files all successful before this happened, it happens when I am connected to the internet, I use dial-up access

    added on 25/11/09 still have the problem mentioned above, even explore two windows are runnibg on the system, or two IE browsers running?

    Added 27/11/09 I ave followed all instructions up to and including thefix tool kb/93623, stiil I have this report of windows Defender quickly appearing twice in a row, then I'm disconnected from the internet. any more ideas thanks sam

    Visit this link:
    http://support.Microsoft.com/kb/936213

  • Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes February 29, 2016

    Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

    While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.  During the process I started to have some warning of our AT & T account that I approach the limit of our data plan, then in quick succession, only warnings, said I've reached the limit and then passed in the data, limit charges.  At the time it was done, I had accumulated more than 2 gigabytes of additional data charges.

    Until that point, I was very pleased with the device and confident in the ability to use Wifi and data.  Due to this incident, I became very suspicious of the camera and the huge potential for data overcharges. It is extremely disconcerting as it happened while it is directly connected to the internet using my computer at home.

    Please note that, in the episode my ISP and the computer is remained connected to the WEB with no sign of connectivity issues.

    Someone at - he had a similar experience and understand what went wrong?

    Thanks for your support,

    Jerry

    JerrolK wrote:

    Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

    While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.

    You have chosen the option of direct download, you have received a message of warning from AT & T about it yet.

    He did what you asked it to do.

  • I recently purchaced a Netgear wireless router. I can't get any Internet access every time I connect to the internet.

    I recently purchaced a Netgear wireless router, I can't get any Internet access every time I connect to internet

    Hello

    Your computer connects to other networks wireless?

    Check with the Netgear support, their online documentation, firmware and ask for their
    Communities and Forums.

    NetGear
    http://www.NETGEAR.com/

    NetGear - Support & community
    http://support.NETGEAR.com/app/

    NetGear - Forums
    http://forum1.NETGEAR.com/

    -----------------------------------

    Have you checked the updates or re-installed the driver of your WiFi? Check with the manufacturer of the system (motherboard
    Manufacturer of custom systems) If an edge device and/or the manufacturer of the device.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available.

    The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?

    A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win

  • Copy-hard drive when you are connected to vCenter

    Y at - it a command to copy a virtual disk when you are connected to the server vCenter instead of being directly connected to each ESX Server?

    Thank you

    KeV

    You can use the cmdlet Copy-DatastoreItem but there are a few known issues with this cmdlet when the current generation.

    Or you can use the underlying CopyDatastoreFile_Task method.

    Note that you need to copy all the files (header & flat file) that make up a vDisk yourself!

    ____________

    Blog: LucD notes

    Twitter: lucd22

  • When you use private browsing, your web history is connected to your wireless router?

    I know that during private browsing, even if your browser does not save history, passwords, etc., that your browsing history may be followed by Web sites and your ISP. When in private browsing mode, your browsing history is getting connected to your wireless router?

    Yes, PB has no effect on the information stored in a journal of router.

  • I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

    Wireless router / Internet problems

    I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

    Hello

    Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
    Update your WiFi drivers on computers. How you are positioned in the router? Are there
    obstacles in the path?

    Actually try updating your driver and disabling the network logon.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
    updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
    lower left click on merge or delete network locations - REMOVE all instances of your network (and the
    others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

    -----------------------------------------------------

    Check this box:

    Strange problem with Internet under Vista
    http://www.catonett.com/blog/archives/194

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
    http://support.Microsoft.com/kb/928233/en-us

    ----------------------------------------------------

    And:

    Network connection problems
    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • local access only - cannot connect to my wireless router

    I can't get my laptop to connect to my wireless router, all I get is local access only, but my laptop with windows 7 connects very well.

    Hello

    Maybe this can help.

    Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

    When the work turns on the Wireless security.

    Note * people sometimes make mistakes in writing and retype the password for security.

    Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

    --------------------------------------------------

    I really checked and configured every thing and it doesn't work.

    Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
    some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .


    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • When you try to run Linksys Wireless Network Monitor error: cannot load ProcNICs.dll, Can t Load Res_dll

    Original title;

    Linksys wmp54g & windows vista

    When you try to run Linksys Wireless Network Monitor I get the following errors:

    Cannot load ProcNICs.dll

    Failed to load Res_dll

    Linksys wireless adapter is installed and running properly, but I can't use the application linksys to establish a new network connection.

    Any suggestions?

    Thank you.

    Hello

    I suggest you contact Linksys for assistance:

    http://home.Cisco.com/en-us/home

    Linksys Support link:

    http://homesupport.Cisco.com/en-us/support

    I hope that helps!

    If you need help on Windows, please keep us informed.

    We are here to help.

Maybe you are looking for

  • Satellite A500 - controls above the keyboard do not work

    I have a problem with the controls volume/dvd above the keyboard on my Satellite A500 - that they are turned on but when I touch them nothing happens. They worked when I got to the laptop, but I think that I might accidentally disabled can understand

  • The a6 - 5400 k in my hp p7 - 1436 max loads to 64 degrees celsius

    the A4-3420 in my p6 2316 s past 40 degrees Celsius maximum to the maximum load with the temperature of 46 degrees Fahrenheit air. My p7 - 1436 s is still under warranty, what do I do?

  • automate the creation of channel in max

    Hello all, I searched this topic in this forum and have not had a previous post. I was wondering if this is possible: I would write a VI to the Max and settup automatically tasks the virtual channels instead of manually configure these in MAX.  So th

  • high definition audio does not work - error code 10

    Current title: idt high definition autio does not work My idt high definition autio does not work it gives me a code 10 how to fix

  • Scale of BB! 0 app for Playbook

    Hi all, in excess of what can be described as sillyness, I created a game in webworks for my z10. I used fixed assets to the z10 resolution. now, I decided to port for playbook and obviously changing resolution is a bit problematic. is there a way I