No Internet after Windows Update
After a recent Windows Update, probably a week ago, I can no longer access the internet on my desktop HP with Windows 7 Home
Two other laptops are running on the same switch and get online fine isn't the source.
Ideas.
Thank you
Alhonse
See: http://windows.microsoft.com/en-us/windows7/Open-networking-troubleshooters
Open network TaurArian [MVP] 2005-2011 troubleshooting services. The information has been provided * being * with no guarantee or warranty.
Tags: Windows
Similar Questions
-
Cannot connect to internet after Windows Update
I was not able to connect to the internet after windows updates 7 of 14 October 2010, unless I have to restore the system to October 13.
Hi jlm00926,
· Update that you installed before the problem?
· Are you able to connect to the internet properly now?
You can set up your computer in a clean boot state. Subsequently, download & install the update manually from the Microsoft Download Center.
http://www.Microsoft.com/downloads/en/default.aspx
Clean boot will start Windows 7 by using a minimal set of drivers and startup programs and helps eliminate software conflicts.
The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135
Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7: http://support.microsoft.com/kb/929135
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
No Internet after windows updated August 18.
No Internet after windows updated on August 18, to return from vacation.
System Restore to 8 August which worked yesterday and restored internet, but when you sign in today update windows automatically installed and once again no internet no access. Computer won't let me restore of the system now well I tried different dates - said the system restore could not replace the file (c: Windows) with the original copy of the restore point - an unspecified error has occurred in 0x80071a90. Still no internet access. Any ideas please?
The KB2705219 update could be the cause and uninstall that solved the problem for some users.
But...
In another thread [my computer today installed windows 7 updates, but my internet has been lost.] But the network is visible. [what caused this?] a user has identified this notice - McAfee
While it remains the case that uninstall Win7 KB2705219 solved the problem for at least two users update, you might want to consider the McAfee fix, as appropriate. At least two users also reported having removed then reinstalled McAfee and their systems were back up & working properly afterwards.
I have McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee without following their abduction - Reinstall procedure would have upgraded my PC at risk by not updated. Actually, I removed and then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries]. My home network has survived without any new replacement set - firewall Windows just took the right settings without any complaint.
I had to run the MCPRT deletion a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat
-
Cannot connect to internet after Windows updates
When I double click on broadband connection, it won't open after installing windows update
* original title - whenever I have install windows update install but after pc restart I cannot connect to internet__b'coz when I double band click on the connection, it will not open__due for this I have to restore all the updates__please help *.
Hello
1. what operating system do you use?
2 you get an error message while trying to access the internet?
3 what updates did you install?
1. you try to install an update in both clean start state (restart the computer after installing each update) and check the update is causing this issue and send the same return.
Put your boot system helps determine if third-party applications or startup items are causing the problem.
Try the steps instep 1 in the article to put your computer in clean boot mode.
http://support.Microsoft.com/kb/929135For Windows XP:http://support.microsoft.com/kb/310353
Note: To restore your computer to a Normal startup mode, follow these steps:
a. click on start in the box start the search.
b. type msconfig and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.
c. under the general tab, click Normal Startup - load all device drivers and services and then click OK.
d. When you are prompted, click on restart.
Install Windows updates in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates2 please check the items below to solve the problems of internet connectivity.
Why can't I connect to the Internet?
Using the troubleshooter from network in Windows 7
Use Network Troubleshooter event logs to solve network problemsIn Windows network connection issues
Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Lose the ability to access Internet after Windows updates published in the last 24 hours
I lose the internet connection if I install the Windows updates published in the last 24 hours. I have had access to the internet after restoring to a restore point. I was able to recreate this problem be reinstall them again.
Update the example is KB2121546
Manually install a - alone.Reset.Still have Internet?Manually install the next one, one.Reset.Still have Internet?Repeat this until you lose Internet or have installed all updates - what comes first. If you lose Internet - uninstall that one and install all others (using the same one at a time - at the most method you will have 8-9 for this cycle) then come here and let everyone know what update was kill your Internet connection.Why? An update of the example is of no help. There are 9 updates you could possibly have * if * you were aware through yesterday. Knowing the SPECIFIC update that is causing your problem would be better for you and those who help you.
--
Martin Stanley
MS - MVP
--
How to ask Questions the Smart way
http://www.CatB.org/~ESR/FAQs/smart-questions.html -
Just got a new laptop last week... The internet worked right out of the box... Now last night I let windows do a big update, and now my internet does not work... It says something about "connects to the DNS servers.
So I did a system restore to an earlier time, and the internet works fine...
which ____ should I do?
Hi 31aboy,
Welcome to the Microsoft Answers community.
Try to install the update to windows in clean boot mode.To enter the mode of clean boot on your computer, follow these steps.
1. click on start, type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. now run windows update.http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.
If you are facing the same problem even after installing the update in clean boot mode, then check the update in windows update history and send me the update name.
Steps to view the windows update history:
1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
2. in the left pane, click view update history.
Hope this information is useful.
Let me know if it worked.
Thank you, and in what concerns:
Umesh P - Microsoft Support
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think. -
Pavilion hp15e049ca: no internet after windows update 10-Ralink RT3290wi - fi adapter
I have a Ralink RT3290wi wireless adapter. There is no internet after upgrade windows 10. What I need to do or is there a driver for this card for windows 10.
Please suggest
Thank you
Samrat
There are several posts about it on microsoft on any internet forums after the upgrade. in here is a that help migt
Here is an another http://answers.microsoft.com/en-us/windows/forum/windows_10-networking/windows-10-network-adapter-problems/3e11b955-1e5f-43e0-8891-7fef24e693dd
-
Vista Home Premium no Internet after Windows updates don't Help please!
Have you tried the following?
Windows Vista
To start the Wireless Auto Configuration in Windows Vista, you must log on as an administrator.
- Click Start and Control Panel
- Select Administrative Tools , then Services
- In the Services box scroll down the list of Services (Local) until you find one marked Wired AutoConfig and double click it.
- In the Wired AutoConfig properties (Local computer) box, change the Startup type to Automatic
- Click Start and once the service has started, click OK
- Now find the marked service WLAN AutoConfig and double click it.
- In the service of autoconfiguration WLAN (Local computer) properties box, change the Startup type to Automatic
- Click Start and once the service has started, click OK
- Navigate to the file and Exit to close the Services window
-
Unable to start - blue screen after Windows update
original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista
Can not even go in safe mode
Hello
try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
If you can make the above change how you receive updates to find the update problem
When right-clicking on it UAC prompt you hide it
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Choose one of these settings:
Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
-
* Original title: System Restore
Windows 7 Home Premium
Dell XPS L502X
Intel Core i7-2670QM CPU @ 2.20 GHz
8 GB RAM
After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance. The video freezes for a split second. I tried system restore several times, but my computer could not be restored to several dates I've tried. If I do not solve the problem today, tomorrow morning I'll try an advanced recovery method. I have a Windows 7-64 bits of the operating system at the same time, graphics cards Intel and Nividea. I had this same problem several times since I got the computer (Dell). Dell has replaced some hardware. Previously, he was my Western Digital external hard drive software that caused the problem. After that I deleted the software from the computer, the problem has been resolved.
Does anyone have any ideas on how I could get the system restore to work? Or another suggestion that might help solve the problem?
Thank you
Joe
Hello
This can help you:
1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.
http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
AVG will cause problems with SR too.
«Temporarily disable AVG»
http://www.Avg.com/ww-en/FAQ.Num-3857
2. try to use Safe Mode system restore.
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
"Start your computer in safe mode.
3 Malware will stop at the system restore.
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
____________________________________________
And some information for you about Windows updates:
Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.
You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.
But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.
You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:
'Remove an update - Windows 7'
http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7
When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again
"How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"
http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html
_____________________________________________
Here's how to chanage update settings, if you think it is necessary to:
"Understanding Windows Update and Extras in Windows Vista and Windows 7.
http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/
Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;
Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system
See you soon.
-
Good question after Windows update on Satellite P100 PSPA3E
I encountered a problem with my sound card after a Windows Update. It became an old analog tuner with problems of dust on his volume knob. (this is a reference "sounds like" for those old enough to remember) I updated the driver to the most recent DriverGuide.com, no joy.
I even did a complete system restore "with the"product restore disk."" Which fixed the problem until Windows updated the right files for trash again. I don't know what files do the dirty on my card since most of the windows system updates are performed while I "continue to work! Anyone with ideas?
Thank you
JD
Hello
What operating system do you use? XP or Vista?
Satellite P100 PSPA3E must use a sound chip Intel high definition audio Conexant CX20551-22.
I recommend to remove the sound card in Device Manager after installing Windows updates.
Then restart the computer and install the latest audio drivers available that support the sound chip HD Conexant CX20551-22.First of all, you should try to use the driver for the Toshiba page. If this does not work, check the Intel page!
Please don t forget to restart the laptop after windows update finished.Best regrads
-
Satellite L500 - system hung on the splash screen after Windows update
Hello
I hope that someone can help you. My Satellite L500 is suspended on the blue startup screen after it restarted after a windows update, the mouse arrow moves and it seems to be a hard disk with a twinkle activity in the system lights. Except that nothing? Any ideas?
Thank you
DeniseHello
> hung on the blue startup screen after it has restarted after a windows update
This means that you get a blue screen after Windows update and more, you can start Windows t?You can start Windows in safe mode?
-
Laptop Presario CG56: CG56 crashed after Windows Update
After Windows update, set during the race, woke to find a "scree Orange" with the logo of Compaq. Press F11 to enter in recovery mode has organized the restoration of the system for each restore point. Finished with 0x8000ffff. A ran the recovery system completely at the end. Finished with the Orange screen. Minimized ran impage recovery all the way to the end. Repeat screen Orange.
I find that the BIOS is corrupted in Windows Update, somehow. I can get to the line of command in recovery mode, but I don't know what to do.
Help!
Me am HP Advanced System Diagnostics V3.0.3.0 by pressing f2 until the screen has finally come. Do you have the System Diagnostics.
Have you hard reboot by removing the battery, press the button for 15 seconds, extra power, hit start and the start up like a new PC was started and Windows.
-
"limited connectivity" on after windows update wireless router.
Original title: "limited connectivity" on after windows update wireless router. happens all the time after soundcards implemented to date. I then 'restore' on the eve of going online. Why?
I have... 'limited connectivity' icon wireless router in the toolbar after windows updates. happens all the time after windows updates. I then 'restore' on the eve of going online. Why?
HelloWhat operating system do you use?Method 1:Check the update has been installed and make a note of this update.To check, follow these steps:
a. Click Start, in the search box, type in update
b. click on windows Update
c. click view update historyNote: If this isn't a significant update, you can hide the update.
To hide an update, follow these steps:
a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
b. do one of the following:
o click the link that tells you important updates are available if you have some updates to hide.
o click the link that tells you optional updates are available if you have optional updates to hide.
c. Select hide any update you want to hide, right-click and then click on update. Do this for each update you want to hide.
d. click OK.
If it an important update then you can try the following method 2:
Method 2:Download the update of the article mentioned below (enter the number of the update in the search), put the computer to boot and then install the update and check if that helps:Download here: http://www.microsoft.com/download/en/default.aspxClean boot: here is the link:
http://support.Microsoft.com/kb/929135
Note: When you're done to diagnose, follow step 7 in the article to start on normal startup. -
Hello
After windows update:
my PC slowing significantly
Windows search sometimes opens spontaneously
pages (explorer) sometimes becomes white and the icons disappear and takes a long time to be closed
I have ms security essential and it is updated, so I do not think that my system is infected.
Thank you.See the following topics
http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us >
http://support.Microsoft.com/FixIt/ >
06/28 / 1106:37: 19 am
Maybe you are looking for
-
Satellite L300D - how to recover Vista without losing a data partition?
Satellite L300D - 22KCode: PSLC8E-05500CCEVista Windows (Home premium) HARD drive has two partitions (visible):-C: (Vista)-D: (data) After installing avast antivirus startup takes 20 minutes (corrupt file?, defective HARD drive?)Moved all my personal
-
The new capital el download stopped movies iTunes works?
Since the new update of El Capitan, my library of iTunes movies won't play. They all worked without any problems, but now he says that they play, but the picture is black and there is no audio data. I'm playing them through iTunes on my Macbook Air -
-
Problems with 'Runtime Error '.
The system is Windows XP Professional 64-bit After I enter the password and login to the system as an administrator. a small window opens, who says: ------------------------------- Microsoft Visual C++ Runtime Library Runtime error! Program: C:\Progr
-
Windows Update / Windows Install Error code 80070641 and 641
I use a Windows vista Home Premium SP2 OS and having this problem for a few months now... and the difficulty (which continues to work for me) came from Support by Email from Microsoft. I just had the problem (11 Windows updates wouldn't install) stil
-
Why don't recognize my rawfiles of Nikon D4 and Nikon 800 E bridge?
I have thougt that all cameras was readable in the new versions of CC!