No Internet connected work, Ethernet

The first images have been does not not on some sites like Reddit, all the thumbnails would not charge but if I clicked on the link that would load the images. He then became sites as gfycat.com does not load. I was on looking at NewEgg.com mobile and then suddenly not loading some images and Web sites looked like their broken down versions in HTML. Now, I'm no internet at all.

Says Ethernet is connected in Network preferences and I have an IP address, but all Web sites just say 'Page load error' now. I went to the Apple Store and bought the USB converter cable to Ethernet that was also acknowledged and said "USB ETHERNET: connected" but still nothing. I have disabled Little Snitch and have no other known running firewall.

I'm running an old Pro Mac, OSX 10.7.5 2006 model.

Sidenote: 4 GB of my 8 gb of RAM just died as well. The jury now has a red light on the subject.

Thank you!

Other devices to connect to the internet via Ethernet?

What IP is assigned to the Mac? Yo can post since it is an internal and not unique address.

Have you put off, then back on your router and the modem?

Have you tried another cable?

Have you tried reseating the memory sticks? However, usually this is only temporary since the stick in the 2006-2008 Mac Pro tend to fail over time

Tags: Mac

Similar Questions

  • Internet connection works, but Firefox doesn't load pages

    Internet connection works on Win7 Office (updates Windows, Google Earth works etc.) but Firefox & IE does not load web pages.
    Computer laptop (Vista) that uses the same router works Firefox fine.

    Performed various AV like Malwarebytes etc. software with no problems found.
    Re-install win 7
    Tried these solutions
    https://www.YouTube.com/watch?v=JK7oYj2YPNQ
    http://en.kioskea.NET/forum/affich-19117-Internet-connected-but-can-t-browse
    and other similar.
    Send from your cell phone like PC WIn7 does not allow me to connect and use the troubleshooting software

    Thanks for the reply, but I found the solution.
    Many answers forum suggest to change the network settings, but that does not work either.
    The combination which solves the problem was to run "SuperAntiSpyware" who found a virus that Norton has not blocked. AND to uninstall and reinstall my copy of Norton 360.

  • Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

    Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

    Hey, if the problem has finally been fixed! I thought you would like to know the solution.

    Select Preferences - network - system - advanced - DNS network - click + symbol - Type 8.8.8.8 - Ok - apply.

    That's all. Works perfectly now. Very much appreciate your help, thank you.

  • no internet connection using ethernet, wireless works

    Inspiron 9300, windows xp my wireless connection works fine, but when I disable and enable my internet connection ethernet does not work.  I give and get little or no connectivity message.  When I try to repair the connection, says cannot repair IP.  So that if I manually set the IP address, my status will connects, but under packages he received a number of climbing, but a 0 under.  Another computer connected via ethernet on this modem works fine.

    I restarted the modem, checked all connections, has a restored system twice on different dates when it was working fine.  Somewhere, I'm missing the correct setting.  What other information can I give?


  • Speed of Internet connection works very slowly (21 Kps) on Qosmio F20

    My Internet connection speed (dial-up) on Qosmio F20 working very slowly (21 Kps)
    When I try to any other computer (desktop or lap top) it works correctly and speed comes up to 25 Kps

    Please, could you help me what I have to do.
    Thank you

    Have you tried to connect and to prove your speed more than once? I mean we´re to talk about 4 difference Kbps (!) on a dial-up connection! So I suggest you to watch and prove your speed again and again, because there may be various reasons that a dial-up connection can be slow.

    Please keep me informed of your progress.

    Welcome them

  • My internet connection works fine and I can access all the links except facebook. Why is this happening?

    Everything works ok in my internet connection.  But I can't connect to facebook.

    You will find support for your problems of connection in the appropriate forum of networking: http://answers.microsoft.com/en-us/windows/forum/networking

    You will find support for Internet Explorer in this forum: http://answers.microsoft.com/en-us/ie

  • 64-bit Internet connections work, 32-bit Internet connections do not work.

    The system configuration:

    • Windows 7 Home Premium 64-bit
    • HP Pavilion P6310f
    • AMD Athlon 2 x 4 630 image processor
    • 6 GB DDR3 RAM
    • nVidia graphic Chipset

    Symptoms:

    • all 32-bit internet programs do not detect an internet connection and cannot connect to the internet.
    • Internet Explorer (32-bit) displays instantly "Cannot Display the Webpage", there is no apparent delay or the connection attempt.

    Counter-arguments to skeptics

    • Computer starts completely, no error message.
    • Network and sharing Center shows "Access Type: Internet", detects no problem.
    • Windows updates work
    • Internet Explore 64-bit works

    I work for a local computer repair business, and I've seen this problem now on at least 3 machines.  I've almost exhausted all means to try to solve these problems, ranging from to restore the system registry changes.  Nothing seems to have helped.  Here's what I did on this specific problem:

    • Reset Internet Explorer settings
    • Reset the Internet Explorer advanced settings
    • netsh winsock reset

    Until you try and suggest that it is an internet explore addon, I said all THE 32-bit programs, so that some programs use the Internet Explorer settings for the communication of the internet (for example, proxies) they are not affected by the integrated addons.

    I thought I could keep from doing another massive troubleshooting on this one and see if anyone else has a better answer for me.  So far I've never seen someone say they got this fixed solution without saying 'I reformatted my computer and it's corrected now.  This isn't a good solution for a problem caused by potentially a single file.

    So, anyone have any ideas?

    Hello

    ·         What is the security software installed on your computer?

    ·         What were the changes made to the computer before the problem occurred?

    Method 1:

    You can check on what is happening in SafeMode with network option. Follow the link to start the desktop in SafeMode with network.

    http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

    Method 2:

    Also uninstall the security software temporarily and check if it makes a difference in the way applications respond.

    Once you have done to resolve the problem, reinstall the software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I am getting error ' are'nt you connected to the internet "even though my internet connection works fine

    Original title: I was a console game, but now I have decided to intervene to PC games, for this, I downloaded DirectX End-time Web Installer with .NET Framework 3.5 SP1 (FULL VERSION)...

    Why it shows an internet connection every time?, I mean my internet works perfectly, but each time it displays "you are'nt connected to the internet?

    Hello

    Thanks for the reply with more information.

    A large number of variables are involved when you connect to a network: cables, drivers, network adapters and routers. Some common problems are:

    • A switch to wireless network adapter is disabled

    • Airplane mode is on

    • Poorly connected or disconnected cables

    • Wireless standards do not match

    • Missing updates

    • Incorrect network connection settings

    • Damaged or incompatible drivers

    • Hardware or software problems

    Perform the steps from the link below and see if the error Stops appearing.

    http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-a-network

    Hope this information helps. Response with status.

  • My Wired internet connection works on a computer, but not the other.

    I have a rope Ethernet connecting my cable modem to my laptop. When I plugged it in, it immediately connected my laptop to the internet. I took this same chord and plugged into my office. It connects, but I get a 'local only' connection and cannot access the internet. I tried all suggestions from windows to solve the problem. I reinstalled my network card. I played with all the internet options in Control Panel. How to make this work? It is clearly not the modem or the cable because it works on my laptop.

    I am running vista on my desktop.

    Hello

    Is that your desktop is configured to obtain an IP address from the DHCP server? Open the local area connection properties in your office and check the properties of the Protocol ' TCp/Ipv4. Be sure that this radio button for "obtain an IP address automatically" is selected.

    Thank you

    Girish

  • Updated programs (e.g., Skype, MSN Messenger) indicate "no internet connection" internet connection works

    I had problems with Vista, firstly with respect to some automatic updates is blocking internet access (still pending) and now some improved programs, such as Skype, MSN Messenger, TomTom, etc.) do essentially the same thing: I upgraqded Skype, which worked perfectly before the upgrade and nowwhen I try to connect, it says no I am not connected to the intrnet, when I'm clearly.  I have disabled the Windows Firewall, added programs such as exceptiosn in the firewall and still no good.  This seems to be the case with more and more programs and it's very frustrating.  Help, please.

    Thank you.  As an alternative, I would consider going back to XP, if you can tell me how - I want just all work...

    Hi Mark,
    Yes, I think it turned your restore points.
    Just to make sure you can back up 'now', can you do a full backup of the system to an external source or another partition?

    This is my opinion and I think we get very close to the point of no longer options. :-(

    Let us know what you do and how it goes!
    Matt Hudson
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • = work wireless Internet, internet connection work is not cable

    I have a dell xps15z.

    in Device Manager, the ethernet controller is listed as does not like is it isn´t a driver installed (in other devices, with a yellow warning, nothing in the properties).

    I ve installed the driver (R296457.exe) atheros ar8152 and restarted my computer several times. I still can´t make it work...

    I Don t really know what else to do now, help?

    Hi dimikiller,

    That's what I mentioned in my last answer. You have just unpacked the files, but the drivers are not installed. Please, note the predefined path and once the files are decompressed navigate to this folder and then run the installer from there. Here are the steps:

    • Click on my computer.
    • Double-click the C drive for access.
    • Double-click the Dell folder to access.
    • Double-click the drivers folder to access.
    • You will see a folder for the Sub name R296450.
    • Double-click it to access and run the Setup file from there.
    • Follow similar steps for the other set of drivers.

    I hope this helps. Please share the results.

  • Hello, my internet connection works like.

    My wireless disconnects all the time and brand "limited connections.

    I had this problem it 2 weeks ago and couldn't of all access the internet with my computer.
    Internet is reviewed all alone, but I found the same problems today but with break connection intermittent but that me prevents the stay more than 10 minutes online...
    Thanks in advance for your help

    Ask your question here: -.

    http://answers.Microsoft.com/fr-FR/Windows/Forum/Windows_7-Networking?tab=unanswered

  • No internet connection using ethernet. Help, please!

    My computer is a DIMENSION XPS GEN 5. I have format my hard drive and reinstall OS (XP Home Edition) I got the DSL service with comcast, but the technician tell me that ethernet controller must be instaled. I have download some controller ethernet on our page of dell, but always without conection because I don't know what to do now. When I try to activate the conection area icon, a message appears telling me that there is no conectivity, so I try to repair conection but show a new message... "window cannot renew my IP address.

    Can you help me?


  • Can I connect an Ethernet cable from my MacBook to a PC to give it an Internet connection?

    So I had an office with no Wi - Fi. Can I connect my MacBook 2010 to it with a cable ethernet and who give the computer, an internet connection?

    You should be able to share an internet connection via Ethernet. See if there is

    items applicable to support when you search help in the OS X menu.

    Some control parameters must be enabled; some by default are not ready.

    And for the connection remains active, the host cannot go to sleep or be cut off.

    Your Internet ISP provides a modem that has an additional Ethernet port? If it is

    of the correct type, it can be a direct way to set up a second computer by cable.

    Good luck!

  • Access to Internet only works if the 3G network is connected?

    When I have the 3 G and WIFI are on, my internet connection works fine. My WIFI signal strength is good and connected. However, if I turn off the 3G (disable 3G) and my WIFI is still and have a good signal strength accoding to the XOOM, I don't have the internect connection.

    Can someone help me on this? Internet connection of XOOM should work on the Wi - FI mode.

    Thank you.

    makes me think that you have not actually found a wifi connection at all. are you sure that your connected to your wifi network and pulling an IP address?

Maybe you are looking for

  • iPhone 6 email stuck in Outbox

    I tried to send a file that is too large, so he is stuck in my Outbox.

  • all THE applications installed should appear in the settings?

    I always assumed all installed applications will appear in the settings screen, but I recently found a few apps that is not included. Is this correct? For example, if I wanted to disable cellular data for an application, I guess the option would be f

  • iMovie uses too much memory

    Hello! We have deleted projects and clips in iMovie so only 30 seconds rest. Even iMovie use 4.9 GB iPad-memory documents and data. Please we advice how to free this memory. iPad Mini, 16 Gb, IOS 9.2.1 iMovie 2.2.1 Best regards!

  • Analyze the text and identify which columns contain unpaired data

    Hello world I want to write an elegant solution in LabWindows-CVI to accomplish the same thing as what I implemented in LabVIEW. The client does not use or do not own LabVIEW.  I have to code the solution in the CVI. Order to simpify the explanation

  • Reading of fluctuation thermocouple k type

    I'm new to Labview please anyone can help would be appreciated. I'm trying to read the temperature using thermocouple type K with a NI 9213 module in Labview. I used two individual channels.  One is the ambient air temperature. The second is one is i