Similar Questions

• Vista can only boot mode safe after updating Panda Internet Security installed on the system

  Original title: VISTA can only successfully starts in Mode safe. When you try the System Restore restarts in Normal Mode and restore failed "Volume Shadow Copy Service used by the system restore does not work"

  Problem started (I think) after that PANDA INTERNET SECURITY did a update and says a restart is required (29/09/2010). System could not restart normally. Started, but virtually nothing loaded and couldn't do anything.

  In Safe Mode, first mistake was a Protection Exception for TPSrv.exe (a PANDA executable)

  Tried to do a Safe Mode system restore to point before PANDA update (28/09/2010). System Restore starts safe mode and then restart in Normal Mode.  After about an hour comes up with error message "Volume Shadow Copy Service used by the system restore does not work. (0 x 81000202) event log.

  I also tried sfc.exe but found no compromise windows

  Hello

  Follow the steps mentioned below.

   

  Method 1:

  Check if the Volume Shadow Copy service is started. Follow the steps mentioned below.

  a. click the Start button and in the search box, type in: Services.

  b. press "Enter" to open the Services window.

  c. find related services that are listed above and check the status (on the road) and the Startup Type (automatic).

  d. double-click the service to change the status of started and set the startup type to automatic.

  Try to do a system restore and check.

  Method 2:

  Since you are able to boot into safe mode, I suggest you perform a clean boot and disable all non-Microsoft applications, then boot normally and control.

  To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to start the computer in normal startup.

  Method 3:

  If you think it's a Panda Security software that causes this problem then, I suggest to uninstall Panda security of the system and check if you're able to boot normally.

  http://www.pandasecurity.com/homeusers/support/card?ID=23010&IdIdioma=2

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• HP envy 14-2090eo: Norton Internet Security causing BSOD

  Hi HP experts...

  The first time a bought a laptop, I have Norton Internet Security installed my antivirus preferred, but on this laptop, I have experienced the BSOD, when opening the software Norton Internet Security to access the user interface, and this problem has existed since the Internet Explorer 10 and 11 happened, so im still only able to have installed the version of Internet Explorer 9 to avoid the BSOD´s. I used the Norton Internet Security 2004 and only known problems on this laptop, I also have many cell members and friends families, where I also installed this antivirus on and also a couple of them are HP products, but they do not know these problems? Can anyone tell me if there is a way to work around this problem, so I can install the latest Internet Explorer, I guess there are a lot of security better connected for new versions of Solution Explorer, so may not be the safest way to have IE installed 9... I guess it must be a problem of Hp with this specific model.

  Hope to hear from you soon - best regards Hpenvy1

  IMHO, uninstall Norton using the Norton removal tool can perform the required updates.  Then run Norton Power Eraser. It would in my opinion to use a different anti-virus.  A lot can be installed to a "30 day trial" until you find one that you like.  If you are resolved to Norton, give them a chance to fix or to visit their forums.  If it's a widespread problem, others will have similar problems.

• Norton Internet Security 2010 automatically close Windows Defender? __

  My set up:

  Windows Vista 32 bit Home Premium, Vista SP2

  HP Desktop

  Modem DSL Connection

  Norton Internet Security 2010

  I just installed Norton Internet Security 2010. I get a pop up notice of Windows indicating that Windows Defender is disabled. When I had Norton Antivirus/spyware 2008 (that I used until the installation of Norton Internet Security 2010) Windows defender was on, but not in real time.  Then, when I'd go to

  The Task Manager > click on the Services tab > click on the Services button in the lower right

  This will display a list of Services. I scroll down and find the Windows Defender Service

  It shows NOT on and manual start

  Before the instalation of Norton Internet Security 2010, it has shown as Started and startup type automatic

  Is this the right setting with Norton Internet Security installed? I do not use Windows Defender, but I read that the Windows Defender Service is responsible for other things in addition to anti-spyware scanning.

  So should I change the startup type?

  and start the service?

  Or, as I said if I don't use it. leave it alone?

  Q. "Norton Internet Security 2010 automatically closes Windows Defender?"

  A. Yes.  It uses its own antispyware software.  Having two different types will result in conflicts and compatibility issues.

  Carey Frisch

• Trend Micro Internet Security will not uninstall

  I have a new Windows 7 Professional 32 - bit Latitude E6500 that drives me crazy. It came with a trial version of Trend Micro Internet Security installed and it's not far, at least not with elegance. Here's what I've tried so far:

  1. Uninstall via programs and features - she would get about 2/3 of the way through and hang for hours until what force you a restart. Didn't matter if I stopped first of services.
  2. Remove the menu start - Trend Micro - uninstall Trend Micro... This would launch the installer even with the same result.
  3. Try Windows Install Cleanup Utility - it would flash some info too fast to read on-screen. In the long run Trend Micro services remained.
  4. Using TISTOOL. EXE of Trend Micro, 'Trend Micro Diagnostic Tool'. This seems to actually get rid of the application well enough. Unfortunately, it kills my network interfaces (Ethernet and wireless) as I have never seen before. I was able to restore the functionality of ethernet by removing the ethernet card in the Device Manager and allow it to be re-installed. But it did not work for the wireless. The wireless adapter is listed in the device and under network connections Manager (and activated). But he is no longer an option to detect wireless networks. I can only solve the problem by performing a restore of the system to an earlier time. This of course brings Trend Micro from the grave too.

  The thought of formatting the hard drive and starting over because of this bundled crapware is really unpleasant. I read the other messages on the Internet with exactly the same issue, but none have provided a solution. I was unable to find manual instructions to uninstall. If anyone has any suggestions I'd love to hear them.

  Hello. I encountered a similar problem on a Latitude E5420 client.

  When I ran the 'change' option (there is no 'uninstall' option) applet programs & features in the Panel, she gave me an error 1719 and mentioned that the installation service could not be accessed.

  I was able to uninstall it like this:

  Navigate to c:\program files (x 86) \trend micro\client server security agent

  Search for the file named ntrmv.exe (I'm not sure it was .exe because extensions were not visible).

  Right click on ntrmv and click on "Run as Administrator".

  This produces the uninstall program and successfully completed.

• How remove "preinstalled" McAfee Internet Security of Satellite U400

  Hi guys

  I just reinstalled Windows XP using the recovery disk if the computer is now as it was when it came from the factory.

  My Satellite U400 native with a free subscription to McAfee Internet Security 30-day. Now that I have reinstalled Windows XP the * McAfee Internet Security Configuration * + icon + has reappeared on my desk.

  My question: * is McAfee Internet Security installed in my notebook? *

  I still have a brochure of McAfee initially provided with the computer that says + Internet Security Suite preinstalled on your Toshiba +. What does that mean? For me + preinstalled means + we + installed by Toshiba before reaching the consumer. However, if McAfee have in fact installed on my laptop, it displays in the list of programs installed under "Add/Remove Programs" in the control panel? I checked that list but McAfee is not there. Is not under 'Programs' in the menu 'start '. So, is it actually on my laptop? Or anything else I have McAfee is little set up the icon on the desktop?

  I need to know if McAfee is actually installed on my laptop (and if it is, how to get rid of her) because the other software I use is not compatible with McAfee - I tried to use both at the same time in the past, but neither worked well.

  Sorry guys, but as you may have noticed, I am not a computer person, so would really appreciate your help.

  Thank you

  Hello

  I guess this will be installed automatically by Microsoft.
  It s called McAfee Security Scan Plus.
  I updated the OS to the window, and this appeared on my laptop as well.
  You can uninstall it if you want, but I wouldn't recommend it because it was such good protection to new malware and spy from the internet.

  But if you want to remove it, then you can find the uninstall exe in all programs-> McAfee Security Scan Plus-> uninstall

• It takes to run Windows Defender if I have Norton Internet Security?

  If I have Norton Internet Security installed. Should I have Windows Defender running?

  Original title: what security is ok

  Hi paowie,

  Absolutely not.  See http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/norton-internet-security-and-windows-defender/761d5aff-382e-46d9-b9f5-f65178b83d91.

  Please disable Windows Defender in Control Panel / Administrative Tools / Services.  Double-click Windows Defender and stop it if it is started.  Then in the drop-down menu, make sure to put it off.  Click OK to save the changes.

  Good luck!

• Why do I get a message saying that I am not connected to the Internet when you try to install IOS 9.3?

  WWhy I get a message saying that I am not connected to the Internet when you try to install IOS 9.3?

  It is a known issue and Apple is working on a fix for 9.3. This article summarizes some of the problems with the current version.

  http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• Re: Uninstalled Norton Internet Security - no Internet connection

  I have laptop Satellite A210 - 11 p.

  Recently, I uninstalled Norton Internet Security, after the subscription has expired and since then, my laptop does not connect to internet.
  The internet itself works very well. I would appreciate your help and advice.

  Kris

  Hello

  Download this software and install it. Run it to clean your registry:

  http://www.WorldStart.com/Weekly-Download/Programs/regcleaner.exe

  Also, check the firewall settings, or disable it to see if you have access to the Internet.

  Welcome them

• Unable to connect to the internet to install sp1 and sp2

  original title: impossible to install the sp1 and sp2, saying: I need internet

  Service Packs and internet

  Since doing a full restore on my computer xp laptop, I can't get on internet.  As I try to connect, a message appears telling me to download the Service Pack 1 and 2.  I copied these on a disk and tried to install it on XP but could not because I need internet to complete the task.  Can anyone help?

  Evergreen

  Please provide the full text of the message, without paraphrasing.

  Start > run > winver > OK

  Compared to what is displayed for your version of Windows.

  How you get Service Pack 1 and 2 files that you copied to the drive?

  You must install Service Pack 3, not Service Pack 2.  If your current installation (after recovery) is the original Windows XP, you must install Service Pack 1 before you install Service Pack 3.

  You can get the necessary files here: http://support.microsoft.com/kb/322389 to this document, download sp1a on the link that says click here to download Windows XP Service Pack 1a (SP1a).

  SP3 withdraws the section down under the heading "Download the latest Windows XP service pack from the Microsoft Download Center" - download the Windows XP Service Pack 3 package now

  You don't need to be connected to Internet to install service packs.  In fact, you'd be better to disconnect your computer from the Internet and completely disable your antivirus application before installing service packs.

  These, see also:
  Prerequisites for a successful installation: http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/windows-xp-sp3-read-all-prerequisites-for-a-successful-installation.aspx

  Steps to take before you install WinXP SP3: http://support.microsoft.com/kb/950717

• My Windows 7 Pro system has some serious hardware, internet connection and security issues. The system image and restore the system in case of failure.

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is whether a professional Ultimate upgrade will or will not fix these bugs.  In addition, what is the cause of restoring the system to fail?  I never turned off or cannot create regular restore points.

  Original title: upgrade a "Fix" for existing system problems?

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is if an upgrade to Professional Ultimate will be or not correct not these bugs.  Also, what is the cause System Restore to fail?  I never turned off or cannot create regular restore points.

  Hello

  1 re-installing/repairing software will not fix hardware issues.

  2. the operating system upgrade is not the way to solve computer problems that can be carried forward.

  3 1. If you use Norton, you should disable Norton inviolable Protection before using System Restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  We really need for more details:

  "My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  See you soon.

• should I connect to internet to install after you have entered the serial number

  should I connect to internet to install after you have entered the serial number

  Serial number for which program?

  You need an internet connection as well as your serial number will register and activate your program

• XP internet security 2011 will not connect to the internet with the help of bs fake malware?

  It seems that this Web site is the only one that I can access.  Internet security XP 2011 don't let me around.  It seems that it will create fake malware programs just for me to buy, but I won't, I want to just surf the net and make the things I need to do. Please God, help me.  8133685546. I can't check email and hope ill be able to check it again, but there's my number in case I can't.  I tried to get the program to remove, but can't seem to locate it.  Don't know what else to do. I tried to scan for malicious programs, but nothing is ever found in your research, they are fake.

  Hello

  you are infected with malware

  Read this information

  Vista anti-virus 2011, Vista Total Security 2011, Win 7 Home Security and include some of the names by a rogue new name change randomly to settle on the victim's computer.  When this particular rogue is installed, it will install as a variety of names in different programs, with each having their own graphical user interface according to the version of Windows running on the computer. Whatever the name, however, they are all the same exact program with just a different name and skin on this subject. This rogue goes by many names in different programs, of which I have listed below depending on the version of Windows that is installed on:

  Windows XP rogue names	Names of Windows Vista Rogue	Windows 7 fake names
  XP Antivirus	Vista anti-virus	Win 7 antivirus
  XP Antivirus 2011	Vista anti-virus 2011	Win 7 anti-virus 2011
  XP Anti-Spyware	Vista Anti-Spyware	Win 7 AntiSpyware
  XP Antispyware 2011	Vista Antispyware 2011	Win 7 antispyware 2011
  XP Home Security	Vista Home Security	Win 7 Home Security
  XP Security 2011 Home	Vista Security 2011 Home	Win 7 Security 2011 Home
  XP Total Security	Vista Total Security	Win 7 Security Total
  XP Security 2011 Total	Vista Total Security 2011	Win 7 Security 2011 Total
  XP security	Vista security	Win 7 Security
  XP security 2011	Vista Security 2011	Win 7 Security 2011
  XP Internet Security	Vista Internet Security	Win 7 Internet Security
  XP Internet Security 2011	Vista Internet Security 2011	Win 7 Internet Security 2011

  Follow the EXACT below removal instructions

  http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011

• Windows Defender and Norton Internet Security? What are the differences, and that I would be better off with NIS.___NIS it has automatic connections which is great.___Thank you. Dennis__

  None

  Windows Defender is an antispyware software.  In itself, it does not all the protection your computer needs.

  Norton Internet Security is a suite of programs, including antivirus, antispyware, firewall, antispam and others.

  Windows 7 consumer security software providers shows those and other opportunities.

  I'm not a fan of security suites.  On my computer, I use the free program of Microsoft Security Essentials antivirus and antispyware protection integrated in Windows 7 is Windows Firewall .