no internet on-site, but when not connected to AD it will be granted to the internet. Help, please!

Similar Questions

• I deleted the majority of my photos from my phone but when I connect it to iTunes it always shows in the bar memory

  I deleted the majority of my photos from my phone, but when I connect it to iTunes it always shows in the bar of memory and it shows that I have no memory left

  You've synced the iPhone yet? It refreshes the data in iTunes.

  Furthermore, if you have configured to load music you deleted or the same photos of iTunes, iTunes will put this information on the iPhone when you synchronize.

  Try pressing sync and see if it changes at all.

• I tried to download paltalk but I tried so many times but could not get that I've been with them for 12 years help please ty

  I've been with paltalk.com 12 years earlier I had to refromat but I can't download paltalk he tells me there is a fault whaen I click run so he can download another box is to say send the whebn of problems, you click on a blue line, it is supposed to go to microsoft I think they deal with it, but I got no joy in 4 days grrrrrrr I disable my anti virus to see if there is a conflict that is killing it but not help there hope someone can put me right thanks bob Sanders

  Hello

  Did you try to download and save to your desktop, instead of running it > then install from your desktop?

  And Paltalk has a Section of their Web site support:

  http://www.Paltalk.com/support/

  See you soon.

• my wireless internet is extremely slow, (about 1-6 KB/s) but when I connect a network cable, it's normal speed.

  A few days ago, I had to do a system restore due to a corrupted program. Once I did the system restore wifi seems to not work at all. The download speed is not faster than a few kb/s but when I connect the laptop to a cable network, internet speed was normal. The wifi on my phone works fine and so did my other laptops.

  1. what operating system is installed on your computer?

  2. What is the name of the template and your mobile phone number?

  I suggest you follow these methods and check.

  Follow these methods and check.

  Method 1: Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:  The wireless card could be the cause of this problem on your computer. I suggest you to update the wireless card and check if that helps.

  a. click the Start button and type Device Manager in the search field.

  b. Select the Device Manager and press ENTER.

  c. in the list of devices, select the network card and your wireless card.

  d. right-click on the wireless card and choose Update.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Check out these articles: 10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-is-my-Internet-connection-so-slow
   
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
   
   
   
   
   

• When I get e-mail with a site said to go to, when I click on the site it does not connect? Is there some kind of filter that prevents connection Web sites? Thanks, Jo

  When I receive an email with a Web site pointed out, even if I click on the site, I can not connect on the site.  Y at - it sort of a filter that prevents me to access the site and how can I fix this problem.  Thanks, Jo

  If you are using Outlook Express:

  Hyperlinks do not work in Outlook Express or in Word (revised 29-Apr-09)
  http://support.Microsoft.com/kb/823301

  Hyperlinks do not work in Outlook Express after you put upgraded to IE7 [or IE8] (revised 29-Apr-09)
  http://support.Microsoft.com/kb/929867

  If still no joy:

  With the permission of MVP Frank Saunders. [RIP]

  If nothing happens when you click on a link:
  Open Windows Explorer or on the control panel.
  Go to tools | Folder options | Types of files.
  Scroll to [NONE] URL: HyperText Transfer Protocol (NOT the shortcut URL: Internet) and select it.
  Click Edit or advanced, depending on your version of Windows.
  Choose 'open '.
  Click on change.

  "Application used to perform action" should read:

  "C:\PROGRAM may EXPLORER\iexplore.exe" - nohome (check the path to)
  Iexplore.exe to ensure that it is correct and use the double quotes).

  DDE should be checked and in the boxes below, you should have:

  #1:
  « %1 »,,-1,0,,,
  #2
  IExplore
  #3 (white)

  #4
  WWW_OpenURL

  Protocol URL: HyperText Transfer with Privacy should be the same.

  If the foregoing is correct, uncheck the box: use DDE.
  

• A click on the shortcut to Chrome, was directed to a different Web site. Went to the McCaffee help, now headed to Google, but could not connect.

  A click on the shortcut to Chrome, was directed to a different Web site.  Went to the McCaffee help, now headed to Google, but could not connect. Not a techie, advice? On a laptop with a Router 2 son. Thank you

  original title: unable to connect to Google Chrome

  Hello

  
  What operating system is installed on the computer?
  
  You can contact the support of Google Chrome for better assistance.
  http://support.Google.com/chrome/?hl=en
  
  Hope this information helps.

• Windows 7 and bios sees not the hard drive, but when I connect the hard drive to the USB with an adapter, I see directories and files

  Please, I need pc

  Original title: windows 7 and bios does not see the hard drive. but when I connect the hard drive to the USB with an adapter, I see directories and files... Ive a hp Pavilion, what to do?

  Check the BIOS for hard drive setting.

  Make sure that you do not connect the drive to a SATA/RAID port.

  Old IDE drives - check the jumper on the drive (use "Cable Select" as a starting point), the BIOS must also be set in legacy/compatibility/IDE mode. Note: If you currently use the AHCI mode, then switch to IDE mode may cause Windows to boot.

  J W Stuart: http://www.pagestart.com

• Hello! I'm having a problem to open a session on creative cloud. I can log on to the page on the site, but when I try to download a product, the e-mail message that is broadcast, it is an email from my ex-boyfriend, and I just can't change it! So I'm not

  Hello! I'm having a problem to open a session on creative cloud. I can log on to the page on the site, but when I try to download a product, the e-mail message that is broadcast, it is an email from my ex-boyfriend, and I just can't change it! I'm not able to buy a product! Could you help me, please?

  Quit Adobe Creative Cloud app.

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '. (" Do not miss ~ symbol" "')

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe > OOBE. Open the OOBE folder and Opm.db bin file.

  Once you had trashed Opm.db file, restart the Adobe Creative Cloud app and check.

• I have created my version of Office Web site, but when I try to transfer them to the phone or Tablet setting it does not merge the info previously created on the desktop

  I have created my version of Office Web site, but when I try to transfer them to the phone or Tablet setting it does not merge the info previously created on the desktop

  Hello

  When you try to create a layout of desktop-based Tablet or phone you can get 3 options open to copy the layout of office. This do not understand the content placed in the pages.

  

  However, you can view each page individually and can copy the contact that you want to move the tablet or phone. then open the same presentation page of the Tablet/phone and use Edit > paste in Place then move and resize the elements according to the size of the layout.

  You can also take a look at the link below to better understand the available phone/tablet.

  Jam Muse: Designing for mobile devices in Muse - YouTube

  Please let me know if you need help for the same.

  Concerning

  Vivek

• Devices bluetooth audio seen paired, but does not connect unless that selected

  iPhone running 9.3.3

  Question is that devices audio bluetooth paired when turned on bluetooth settings will appear on the page, but they do not send audio to them automatically. They are listed under "My devices" but show "not connected". I can select the device in the menu settings and plays sounds as soon as I touch the name of the speaker, but not until I do. Same problem in the car too. Appears on the right, but shows not connected until I have the touch.

  I didn't open the bluetooth settings to on any prior iPhone iOS just selected a camera already attached before. I deleted and repaired, switched bluetooth, reboot the phone, soft reset the phone and even a network reset.

  Thank you.

  Try control centre. Swipe up from the Home button

  

  This screenshot of my iPad, it's the same on iPhone

• I haven't used itunes for some time and now have a new PC.  I've updated my account (change password) but when I connect to my music went?

  I haven't used itunes for some time and now have a new PC.  I've updated my account (change password) but when I connect to my music went?  I am working on Win 8 and still have part of my collection on an ipod.

  Unless you subscribe to iTunes game (which is not a complete solution anyway) your iTunes Library is on your previous PC - solution the easiest is to copy from here or from a backup.  For more information, see How to move your iTunes library to a new computer - Apple Support .  Previous purchases from the iTunes Store may be available for re - download - see download your past - purchases of Apple Support.

  If none of these approaches allows to recover the contents of your library, see user turingtest2 on recover your iTunes from your iPod or an iOS device library for a list of tools and methods that can be used to copy the media etc from iPod to iTunes.

• Headset Bluetooth paired, but does not connect.

  I recently bought a pair of headphones Bluetooth (BT) to replace the ones I currently have. In any case, I have them connected to my phone, but now I want to use it on my laptop. It does not connect to it. He was just trying to connect to my phone. I even turned off bt on my phone, but the headphones does not connect to my laptop. I tried to go to the playback etc... devices and clicking on the 'connect' option, but it does nothing. Everything seems to work fine, except that! Help, please.

  Hi Tom,

  Please contact Microsoft Community. I understand that you have a problem with the Bluetooth Headset connection. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  To better understand the issue, let me know if you face any problem when connecting the Bluetooth headphones on another computer in Windows 7?

  This problem might have occurred because of these reasons:
  1. wrong settings.
  2 damaged material.

  Try the steps listed here and see if it helps:

  Method 1:
  I suggest you to run the corner hardware store to ensure that basic material settings are set correctly.

  Open the hardware and devices Troubleshooter http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I suggest to return the item and make sure that the Bluetooth settings are set correctly.

  Add a Bluetooth device to your compatible computer device http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  See these articles for more information:

  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows/change-Bluetooth-device-settings#1TC=Windows-7

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• tnsping kcp5 is ok, but does not connect using netservicename

  Dear Sir.

  We tried the trial version 10.0.5

  On the computer of Client 32 bit (XP and Windows 7) this PL Sql Developer works very well if we connect to 32-bit Oracle or Oracle Server 64 - Bit Server.

  We tried this on Windows Server 2008 64-bit (Machine formatted fees)-> installed Oracle 11 g 64-bit Standard Edition Version-> it works very well for the database on the server, as well as through client machine using netservice.

  Now, we have installed PL SQL worm 10 on Server 2008 (64-bit)-> customer request 32-bit install-> we installed 32 bit Oracle 11 g-> (full) Client created by using the new net service 32 Bit Client-> Net (kcp5) configuration utility-> we are able to

  tnsping kcp5 to the server physically level but also at the level of the customer in the machine.

  But when we connect with system/manager@kcp5-> it does not work at the level of the client as well the machine Server

  This installation of oracle 11g 32 Bit 64 Bit 2008 Server client has created this problem which worked very well.

  We have no "need to install 32-bit Oracle client 11g Oracle in Windows 2008 (64-bit server), but since it was held by Pl SQL Developer-> this, installed us.

  Please advise as what to do now.

  Kindly find attached three jpg files as below: -.

  (a) Test_Server_Services.jpg-> various Services running at the level of the Windows Server 2008 (64-bit)

  (b) kcp5 tnsping Test_Client1.jpg (netservice Testing which is OK at the level of the server, as well as at the customer level)

  (c) Test_client2.jpg connection system/manager@kcp5 that gives

  The error ORA - 12514 TNS Listener does not currently of service requested in connect descriptor

  Concerning

  Suresh BB

  ORA-12514 ALWAYS only occurs due to a problem on the Server DB system.

  One of the causes of this problem are when the Oracle database is broken & needs to be started.

  A remote client send a request to the listener by asking to be connected to a specific service.

  If/when the listener knows nothing about this service, the receiver responds with ORA-12514

  view the results from the OS controls following two:

  lsnrctl status

  lsnrctl service

  Because each request to connect to the listener gets connected, listener.log file will contain a line with 12514 as status code.

  * This line contains valuable debugging information. So after this line & surrounding lines.*

  for additional debugging suggestions read the URL below:

  http://edstevensdba.WordPress.com/2011/03/19/ora-12514/

• Paid and have been charged to Echosign, but when I connect it says "the trial has expirΘ.

  I only paid AUD $120 for the subscription to THE annual Echosign. But when I connect to my account Echosign it says trial has expired. Has this happenned to anyone else? Any ideas how to fix?

  I tried calling support, but they are really really bad. Talked to 3 different people, which me transferred to 3 other people who finally told me that I need a subscription to creative cloud to use Echosign. Another told me that I need to buy Adobe Acrobat. Laughing out loud

  Thank you for wasting an hour of my time - completely useless.

  I've used Echosign previously before Adobe purchased and the customer support and the service was amazing, I never had billing issues.

  Now it feels like nobody knows anything yet on this product they have acquired and can even help me to buy/use the product.

  Hi kristinet58160657,

  It seems that the commissioning it not yet completed, please send us your question by e-mail to [email protected] for repair.

  Kind regards
  Nicos

• Unable to connect mifi 4510 hotspot for PC. Wireless see peripheral but does not connect... is to expire.

  mifi4510L

  Unable to connect mifi 4510 hotspot for PC. Meet operational requirements throughout the system. Using XP SP3. Wireless see peripheral but does not connect... is to expire. No msg error in Event Viewer.

  THX

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Try also to update the latest drivers for your device wireless using the link below.

  How to manage devices in Windows XP:

  http://support.Microsoft.com/kb/283658

  Hope this information is useful.