no internet until I disable and then enable network connection

Similar Questions

• I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success.

  I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success. Help, please!

  There are two different versions of Flash. ActiveX for IE version and the version of the Plugin for other browsers. Have you installed the correct version? This forum software is not thing that Flash is installed for Firefox or the Plugin is disabled.

  1. download the file of configuration Flash from here:
  
  Adobe Flash - Plugin version.
  
  Save it to your desktop.

  2. close Firefox using file > exit
  
  Then check the Task Manager > processes tab to make sure that firefox.exe is closed.
  
  {XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}

  3. then run the Flash configuration from your desktop file.

  4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/

  • On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).

  See this:
  
  http://vistasupport.MVPs.org/run_as_administrator.htm

• internal card reader must be disabled and then enabled in before Device Manager it will not work properly.

  Whenever I start my computer, my internal card reader must be disabled and then enabled in before Device Manager it will not work properly. I put an SD card in there and auto does not work. I check my computer and it shows that it is there, but when I double click on it to open it I get a message saying: Please insert the SD card. When I go to Device Manager and disable and enable fine orks. I tried different cards, but it makes no difference.
  I installed a different card reader, but another did the same thing. This leads me to think it's a matter of Windows.
  I tried to do a repair install, but it ends and said that the upgrade has failed?
  Anyone have any ideas on how to solve this problem.

  I am running Windows 7 Pro 64-bit. It is a Renesas controller and I use the 2.1.28.0 with firmware driver 4015.

  I'm not sure but I may have found the problem. I see where a guy here was having a similar problem and it was caused by Acronis. I recently installed Acronis 2012. I have been lucky to uninstall, but I will update this post when I do.  He was also running windows 7-64 bit on a motherboard ASUS!

  Acronis was the problem.  I uninstalled Acronis and now my card reader works as it should.  Strange!

• How can I get Snipping tools im using Vista and this control panel and then enable or disable the thing pc isn't here. Help?

  How can I get Snipping tools im using Vista and this control panel and then enable or disable the thing pc isn't here. Help?

  Hello

  You don't say which edition of Vista you are using.

  Vista Home Basic Edition does not have the "snipping tool".

  If you have a different edition of Vista, read the information on how to find it:

  http://www.PCWorld.com/article/137099/activate_vistas_snipping_tool.html

  If you have one version of Vista, other than the Home Basic edition, you already have the Snipping Tool screenshot utility: click on Start, all programs, accessories, Snipping Tool. If you do not see here, it cannot be activated. Go to the Control Panel and open programs and features (you may need to click programs first). In the left pane, click Windows turn features on or off. If necessary, click continue when you are prompted by user account control. Scroll down the list of features, check the box next to Tablet PC optional components, and click OK. Marketing of these features gives you not only the Snipping Tool, but also input panel Tablet PC, Windows Journal and other features related to the stylus.

  "Install or activate the cutting tool in Windows Vista"

  http://www.mydigitallife.info/install-or-enable-Snipping-Tool-in-Windows-Vista/

  See you soon.

• Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

  Hello

  I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  For reference:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Note: The notes section through the link above.

• Disable and re-enable Acrobat 7

  I need to disable and re-enable Acrobat 7. The server line seems to be is no longer available and phone activation also is no longer available. Activation via Adobe/go/activation does not support Acrobat 7 and just takes me around in circles.

  My question is how disable/enable Acrobat 7

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

• Update error, bridge U44M1P36 another instance of Setup is running.  Wait until he finished, and then try again.

  I tried, in vain, four times, to constantly update bridge and it brings up the error U441P36, another instance of Setup is running.  Wait until he finished, and then try again.  Thanks for your suggestions for resolution.

  I shut down the computer, and Windows 10 had an update.  I waited for the update of Windows 10 load and then turned the computer back on.  I opened creative cloud and bridge update was available again.  This time the update ran properly, bringing customary dialog regarding making changes to the computer.  The update then installed correctly.  Problem solved.  I still have no idea what the underlying problem has been...

• I bought a trial 30 Adobe BC and then enabled so I could have the product.  An email is sent with the serial number.  Problem is that I don't have the previous version and computer scientist was here, where he suggested I ask fo

  I bought a trial 30 Adobe BC and then enabled so I could have the product.  An email is sent with the serial number.  Problem is that I don't have the previous version and computer scientist was here, where he suggested I ask you to please provide me with the version complete.

  Did you buy the full version or an upgrade?

• Disable and re-enable PE8

  How to disable and re-enable 8 PE? I have a new hard drive and we just copied the old top. Now, I get the message that I have exhausted the number of times I can install PE.

  You must contact Adobe Support by chat or phone when you have the serial number and activation problems.  They should be able to take care of the disabled.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

• ASUS X202E Win8, disable and then re-enable the Qualcomm Atheros AR3012 for back to work. very frustrating

  I recently purchased an ASUS X202E with Win8.  My BT works sporadically with my Notebook Mouse 5000 MS.  At startup, the BT works but if I close the lid or if it passes in mode 'sleep', my mouse does not work.  I have to go into the Device Manager, disable then re-enable the Qualcomm Atheros AR3012 in order to return to work, I tried to reinstall the drivers and other solutions that nothing works. very frustrating

  Hi chris,

  I suggest you follow the methods below and check if the problem persists.

  Method 1: Run the hardware troubleshooter and check.

  Follow the steps to run the Troubleshooter:

  (a) press the Windows key + W.

  (b) type of Troubleshooting , and then click solving problems under settings.

  (c) now, type Hardware Troubleshooter in the option Search .

  (d) click on hardware store to run the troubleshooter.

  Method 2: See the link below and follow the instructions.

  A keyboard or a Bluetooth mouse fails to reconnect after being left idle

  http://support.Microsoft.com/kb/2758967

  See also the articles below.

  Troubleshooting: mouse 

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/mouse/wireless-Bluetooth 

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Hope the information helps, if you have any additional questions, feel free to post. We will be happy to help you.

• Windows 8 and 8.1 keep disable and re-enable the components themselves.

  I have two systems of windows 8. One is windows 8 and the other is windows 8.1. Both are in older computers that had nine drives installed and a new copy of windows installed on each. They have not been upgraded to windows 7, but they have windows 8 is installed directly on them.

  Both suffer from the same problem that Windows continually disables itself and then it will activate itself.

  Did have any registry editors on them. They are two computers in domain related to a 2008SBS with 20 other domain controller (all windows 7) which are all works well.

  They AVG edition company with nothing but the antivirus remotely connect the installed components (same thing with all other systems). Systems are behind a cisco firewall and the windows firewall. They are perfectly up-to-date.

  They were both installed using OEM licenses.

  None of them have ever android devices connected to them (I've seen similar posts on those causing problems). I ran sfc and dism on both. On one, he claims that he found nothing wrong, and on the other hand he find stuff wrong and said he fixed it, but both are always disable themselves.

  Please help me get this resolved!

  Hello Sklar,

  Thank you for your response.

  In general, the issues related to Windows on stand-alone computers or laptops with the basic queries on the Internet, no boot, installation and activation of the commercial versions and other simpler question is dealt with in this forum, so that issues related to servers, governed by group policy and other complex IT issues are for the most part responded in the TechNet forums.

  TechNet is watched by leading, Microsoft and other professionals in the world. You just need to re - ask this question in this forum. To make more global and help computing professionals, you should provide the exact error codes/messages (if any). In addition, give them the details of the configuration of your system and any significant changes you did before this problem.

  I hope that you will have the problem solved quickly.

  In addition to this, feel free to post on this forum for any of your problems with Windows on stand-alone systems in the future. We will be happy to help you.

• can't see the video on youtube (can hear the sound) unless I have disable and then re-enableplugin before each video. Any suggestions what the problem is.

  have updated firefox. have uninstalled and reinstalled Flash Player. Adobe websit confirms it. After that playback of video installation the first but the following videos will not be inless I deactivate the plugin and then turn it back on.

  Three updates this week, one with Flash that came out Tuesday or Wednesday and two of Firefox, such as the sea and Fri.

  Try to install the previous version of Flash - Shockwave Flash 10.2 r102.

• The request already expired window. How to disable and re-enable WebServices on officejet pro 8600

  I have an officejet pro 8600 and waited a few weeks before going to eprintcenter to add the code for the printer I got. Now he says he is no longer valid and I can't understand where to turn them off and reactivate the WebServices on this printer to get a new code. Help, please!

  Hello

  You must click on the application of web services on the printer.

  

  Go to settings > delete web services.

  After that, you can return to the same area and re enable it.

• I am tryint to connect my Kindle to my WiFi network. He said scanning and then failed to connect.

  I'm trying to connect my e-reader Kindel to my WiFi network.  It starts the scanning process and then says he's unable to connect.  What I am doing wrong?

  I just got the kindle and cannot connect to download books.

  Hello

  I suggest you follow the instructions from the link mentioned below to learn how to connect kindle to the wifi network:

  Set up your Wi - Fi network

  http://www.Amazon.com/GP/help/customer/display.html?nodeID=200505540

  You can also contact Amazon support for assistance:

  http://www.Amazon.com/GP/help/customer/display.html?nodeID=200127470

• My laptop Vista with Atheros AR5007 802. 11 b / g adapter does not connect to the internet using the local area or wireless network connections

  I just bought a new router d-link wireless n for my house.  Connect my Win 7 Desktop, laptop xp to Acer and multitude of other devices, but my laptop Vista with Atheros AR5007 adapter does not connect to internet.  I tried to disable IPv6, defining the name of the network, flushing dns cache, etc..  Nothing will work.  (It would not connect to an another 802.11n router in January either.)

  I get local only on both connections Wi-wired and wireless, no matter what I do.
  I'll send this to my office that I can not connect my laptop to the internet and he does not see the other machines on the network.
  Any suggestions from anyone?  I spent hours trying to solve the problems, now completely stumped.

  OK, here was my fix:

  I tried a lot of things, but they do not work.  I downloaded a 'new' driver of HP - it turns out it was the original with the problem.  I found another one that was about a more recent months, still does not work.  I finally managed to get the atheros.cz driver for my card files.  But they do not have an installation file.  I had to search for each old file in its directory, copy it to another place (to be sure, just in case) and then copy and replace the old file with the new file in the original folder.  Fortunately, there were only 6 files, but it took about an hour and a half.  This isn't a lot of time compared to the 18 or if I was just trying to figure out the problem.  Now, my laptop connects to the internet without problem.
  I had this problem with a router "n" beginning of the year in a hostel.  The guy in the Inn told me that he had seen before once.  It's obviously a common problem with these cards (as seen on the "solutions" online) and Vista.  I'm always hating on Vista after this problem.