No its speaker and headphone

Similar Questions

• Headphones not detected, but playing the speaker and headphones.

  I have a hp laptop Pavilion g6-2231tx with windows 8. My speaker works fine, but every time I plug in my headset it detects not she but the audio comes from speaker and headphone.

  I have already uninstall the driver and re-installed but it does not work for me.

  I'd appreciate really any notice about it.

  I have to return my laptop to hp (still under warranty). HP said is it a hardware problem and replace equipment.

  It's corrected now.

• Sound is comin from the speaker and headphones at the same time. How to solve this problem?

  Hello! I installed win7 professional and upgrade to ultimate and when I play a music or vdo sound is coming from the speaker and the headphones. I have a 3ghertz Pentium 4 with 1 GB of ram, and it runs the 32-bit version. And also the headphone option is not present in the peripheral reading option.
  Can any1 please please help me?

  We consider that your machine uses Realtek HD audio-
  (Older versions of Realtek HD audio drivers may have a slightly different form, but the)
  basics should be the same).

  There are two ways to set up the helmet when it is plugged into the façade decision-making;
  (1) in Realtek Manager of her go to Advanced Settings feature in the upper right of the window.
  Check the circle next to cut... plugged back.
  When this fact was you must also click on the yellow folder icon below the
  Device settings advanced and check 'Disable protection of jack façade' is clear.
  -Of the drawbacks of this method are that you do not get an option of separate settings for headphones.
  then they use the same environment as your speakers and EQUALIZER settings, but you can use both the
  speakers and the headphones if you wish.
  -Note that with this option, the helmet does not show in Sound Manager window.

  (2) advanced settings in the sound Manager go to Realtek device.
  The check box next to do advance... at the same time.
  This will disable the speakers when headphone is plugged in the socket of the façade,
  and return to the speakers when headphones are disconnected.
  Also check one or more of the boxes below, according to your need.

  -With this setting, there is an option for headphones in the two Windows Sound manager
  and Realtek HD Audio Manager.
  -With this setting, it does not matter which option to use in yellow folder as the setting icon
  is ' either / or '. You cannot run at the same time the speakers and headphones.

  -Note that with games the headset must be connected prior to spear the game, or
  the default set to the speakers.

• speaker and headphone switch problem

  Hi all.

  I have an annoying problem with my alienware m17x r3. I bought it used, and after a few days, I recognized this problem. When I put my helmet system taking's not getting sound from the speakers built into the helmet. to make this change, I have to open its blasterrecon3di and pass the sound origin of the speakers to the headphone manually. and it's so boring to do. in fact do not make this change when I remove my helmet I have no sounds because the speakers are like diseabled. is this normal? What can I do?

  I solved the problem unistalling the software and after re-booting the base of the control panel Device Manager driver control.

• HP EliteBook 850 G3: No audio for no built in speaker and headphone with jack after driver and windows update

  Hello

  I just made some updates driver and windows (windows birthday) and after installation I have not any sound with the built-in spaker or with my headphones plugged with one taken more. But with a usb headset it works!

  When I go to the window of Windows playback devices there is no device present.

  I already update the Audio drivers and reboot to run the tool in solving audio problems in Windows, but nothing new, it does not.

  Gauthier

  Hi Gunthar,

  Give the driver following a shot

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

  This driver solved the same problem we had with our Elitebook 840 G3

• Sound comes through the speaker and headphones at the same time

  Why is the sound that passes through the speakers and the headphones simutaneouly?

  Hi MariaDuncan

   

  Are the headphones connected correctly?

  I suggest you refer to the link below and use the provided troubleshooting utility. Check if it lists and solves the problems-

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  I hope this helps.

• How to enable multiple audio output on Windows 7? Speaker and headphones play audio different...

  How to enable multiple audio output on Windows 7?  In Vista and XP it did automatically... I'm running Media center and Media player at the same time.  And plugged in a USB headset.  Media Player will automatically play through the headset and Media Center will go to the speakers.

  Why this feature is LEFT?

  Hi jibberz

  Welcome to the Microsoft Answers Forum!

  Unfortunately, several audio output is not a supported feature in Windows 7.  You may, however, check with the manufacturer of material for possible programs for that purpose.

  To work around the problem, try the steps listed in the link below and check: http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/b1d1acac-1f21-4d23-8d68-98964d67c2c7

  For any comments, you can see the link: https://connect.microsoft.com/

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I make the portable speaker and headphones works at the same time?

  my sound card is a device high definition audio

  Hi Bernard,.

  It is not possible to use two devices at the same time in Windows 7.  You can have only one default device at a time.

• Satellite C660D-1GD: no Red Cross and its speaker

  Just turned on my laptop, Satellite C660D - 1GD and my sound does not work.

  There is a red x on the speaker and the diagnosis did not help at all.
  Tried a system restore, nothing - no change at all. Tried to go through the system drivers and there is no driver for the sound: o. OK, came on this site, downloaded the correct driver installed and restarted and nothing again: s.

  Update the BIOS and then in and checked the BIOS and even checked for its simple to have just lost time. Any help would be great.

  Thanks in advance.

  _Firstly: _
  Have you checked whether mute isn't activated?

  Press FN + ESC to turn on or off the mute

  _Secondly: _
  Go to control panel of-> sound-> the Read tab

  Check if the devices on the reading tab are enabled and defined as default device
  In addition, right click to make sure the options are marked as; view hidden devices, see the disabled devices

  _Thirdly: _
  The sound card is Realtek.
  So you can download the Realtek HD audio driver from the Realtek driver page
  Before installing the new driver, uninstall the driver Realtek installed from Control Panel-> programs & features

• USB recording speaker both micro and headphones headset

  Windows 7 Pro 64-bit, SP1

  Adobe CC 2015

  Motherboard: ASUS Maximus VII formula

  I have a Logitech USB headset. I make voip calls and must record the conversations.

  It doesn't seem to be a sound driver that allows the microphone and headphones to send two signals to the input record.

  It will only record my voice and not the other person.

  Is there a way to do this?

  Thanks in advance.

  Audition records only what it is to be delivered by your computer - it is not taking part in the delivery of the signal which is determined by your audio system and pilots.  Different have different capabilities for what he can send to the recording software.  I was looking on the audio control panel, Windows or any special panel for the Logitech headphones and see if there is no option that you can play with the option - I can't be more specific without the hardware and drivers that you even.

  I have to do just occasionally, a similar record in my case via Skype.  If you use also Skype, I can recommend Free Skype Recorder of recorder Record with iFree Skype Recorder - your FREE Skype software call Skype calls it works fine for me and gives me going and audio mic in separate, channels which can then be opened in Audition for editing.   If you use other VOIP services, it's probably worth looking for a similar application for these programs.

• Satellite C850D-107 - Sound speakers and headphones

  Hi all.

  I recently bought a Satellite C850D-107.

  My question has probably been asked several times already, but when I put my headphones in the headphone I still get sound on the main speakers not great when you do not want to broadcast the sound everyone is close, but when I hit upgrade Mute speakers get off but I can still hear me through my headphones.

  Why is this?

  (it is not a problem, it's just a weird thing)

  Thank you

  Hello

  If this thread may be useful for you?
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=256895

  Go to the dashboard-> Realtek HD audio manager
  In the upper right corner, there is a small yellow folder called "connector settings.
  Here, you can re-enable the setting "enable popup dialog box, when the unit is plugged.

  So now, when you plug an external speaker or headphones, it appears and you can select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.

• How to use all the internal speakers and headphones?

  Hello, I am using the internal speaker and the headphones together...
  I have a HP Pavilion dv9695el laptop running windows vista ultimate 64 bit and my sound card is a Realtek ALC268 (I have updated drivers). Card his has three exits: 3, 5 mm jacks on the front panel internal and two speakers (maybe a fourth to QuickDock?).
  If I connect the headphones, internal speakers automatically turn off. I want to use them together and I don't know how to do this.
  Also from "control panel"-> "audio options", it is impossible to pass because there is only a generic element "speakers", so I'm not able to use third-party programs such as "Vista Audio Changer" or nobodies.

  I asked some forums and people told me that it is a hardware limitation... I'm pretty sure this isn't because I also installed Linux Ubuntu (@64 bit) and use it, it is possible to bring together audio of the two devices.

  Please help me, I'm puzzled :(

  Microsoft Windows allows only one audio output at the same time. Therefore, choose internal speakers or external output. I have the same situation with my HP dv7 laptop. With the help of Ubuntu (unix), I am able to drive together the two audio outputs.

• Try to use the speakers and headphones

  • I have a Durabrand 5.1 speaker system and normal headphones with microphone included. The speakers plug in a headphone and headset (of course). I'm trying to figure out how make my computer recognize them both at the same time. Until my recent updates I could disable my speaker and sound was still coming through the headset but either headphones now have no audio or the speakers do not have. Realtek Hd Manager doesn't seem to like them both at the same time. At the same time I didn't need the microphone turned on the headset due to having a Logitech cam with a. Any help would be appreciated.

  Hi Xerosk,

  First try to run the Audio troubleshooter built into Windows 7 and check if it can find any question and fix. Access the link below and follow the steps to run the Audio troubleshooter in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Also, make sure that the default sound device is set correctly for the audio device you are using. To set the default device, follow these steps:

  a. click on, and then type Sound in the box to start the search.

  b. click sound in the search at the top of the beginning menu.c results. Click the reading notice the check mark next to the default device. For most users, the default device is speakers. Make sure that the audio settings are configured as expected.

  Follow these steps:

  d. on the Read tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.

  e. on the Read tab, select the playback device, click on configure and make sure that the configurations are set correctly.

  f.Select the audio device you want as the default audio device and then click on set as default.

  g. click OK to save your settings and close the sound dialog box.

  Determine if you can now hear. If you can hear the noise, the problem is resolved.

  Also try to update the audio drivers supplied by Device Manager and check if it helps. You can access the link below and follow the steps to update the drivers on your computer.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also contact relatek and check if you need to make changes in the settings in Realtek HD manager for the device to work.

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sound does not automatically pass between speakes and helmet.

  Separated from this thread.

  Hello

  Thanks for the reply.

  Please provide the following information.

  (1) what is the brand and model of your computer?

  (2) what you earn when you say "Connect the 3.5 mm plug to the mobo"?

  (3) have tried to turn the headset as default device to check the question?

  I suggest you to follow the steps below and check if it helps.

  (a) right click on the volume icon.

  (b) click on the peripheralof the reading .

  (c) right click on the device that has been set as default and click Properties.

  (d) click the last tab Advanced Options.

  (e) under the Exclusive mode you will see two boxes to check, uncheck the two of them.

  Check if it helps, if you still face the problem, follow the steps one), b), c), d) and click on the restore defaultoption.

  It will be useful.

  Hello Dominique and everyone!

  I have exactly the same problem as the creator of this thread: audio only plays the default device and my system does not switch whenever I say - / my headset.

  I had this problem before, but fixed it somehow. He appeared once again, recently, I think that after installing the latest nVidia drivers, where I forgot to uncheck installing the audio drivers.

  (Steps of Pranav one) through e) unfortunately did not turn.

  Here's a description of my system:

  • I use the Realtek card my motherboard ASRock Z87 Extreme4 Board
  • I use the speakers built-in monitor, connected on the rear plug of the PC with a 3.5 mm jack plug
  • The monitor is connected via Displayport
  • I connect my helmet on the front panel, also with a 3.5 mm jack plug

  Realtek HD Audio Manager detects connections:

  

  Currently, the headphones play audio, since they are selected as audio device by default:

  

  Now, when I disconnect the headset, I want my monitor to continue playback automatically.

  And when I plug the headphones in, I want to play again. I know that it is possible to configure the system like that, since I already had on before. I don't know how to go back again!

  Can someone help me with this? Would be really great, because I'm crazy about this since I'm regularly pass the monitor with headphones. :)

  Here are some more screenshots to illustrate:

  Properties of the device "speakers:

  

  Here the tab advanced discussed:

  

  Completion, the recording devices, since some other forums suggest to change the settings, but nothing helped for me:

  

  And, as an option in the Realtek HD Audio Manager software. Unfortunately, this change also did not help, I think:

  

  Oh, and I just noticed that the display device is actually connected via"digital HDMI" via the Displayport cable, I guess that:

  

  Really don't know what to do with all this... Help, please! :)

  Any help is greatly appreciated and even if you do not answer, thank you for your interest!

  Best regards

  arbine

  Hello

  Please write to us about Microsoft Community Forums.

  Have you tried to uninstall completely the Audio device drivers and then reinstall them using?

  This problem can occur if the drivers already installed for the device are corrupt. To resolve this problem, you will need to completely uninstall the driver/device and then reinstall it.

  Please, try the steps to uninstall the device Audio Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand the section of its adapter .
  • Find the Card Driver.
  • Right-click to map its Driver and choose Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the Card Driver.
  • Right-click to map its Driver and select Uninstall.
  • Restart the computer after the uninstall is complete.

  Step 3:

  Download and install the latest drivers for the sound card on the manufacturer's Web site

  Here is the link to download the latest drivers.

  http://www.Realtek.com.tw/downloads/

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Why has my watch has lost its color and is visible only in the gray tone?

  Why has my iwarch loses its color and is only gray showing tone?

  Hello

  On your iPhone, in the application of the watch, go to: Watch My > general > accessibility > under the title of 'Vision', uncheck / disable the grayscale option.