No lights when the LAN cable is connected by Satellite A30-141

I'm trying to connect my satellite A30 141 to a router using an rj45 plug. When I connect to the ethernet port, nothing happens. no lights on my laptop. someone at - it how to deal with this issue. I can reset the port of a Charter service engineers.

any help would be much appreciated

Hello

I put t know which lamps do you mean because I don t find any LAN LEDs on this laptop. In case you I would recommend checking the status of LAN card in Device Manager. Check if this card has been properly recognized and if there is no yellow exclamation point.

In addition, I put t know what you expect. If you connect the LAN cable to the laptop from the LAN icon in the taskbar should usually shows the connected state of LAN cable (NO red x). If you do not see this icon please activate this option in the properties of LAN.

Tags: Toshiba

Similar Questions

  • Of crashes/blue Equium A60 laptop screen when the LAN cable is in?

    Hi all
    I have a laptop Toshiba Equium A60 which now extends for less than a year.
    I am running WinXp Sp2

    Yesterday, my laptop started to plant flashing a blue screen (not the time to see what he says that the computer reboots too quickly).

    I found that only apparently failed when the network cable is connected for example if I start the laptop, it will be put in service as usual, but when it starts to communicate with the network/router (I see glancing at blue screens in the lower Task Bar to the right), it crashes. I tried another port on the router but no luck.

    Is my network card: Realtek RTL8139/810 x Family Fast Ethernet NIC

    It works well in Safe mode and doesn't crash.

    I updated the driver but and it's always the same.

    I then decided to restore my laptop to factory/day via the Toshiba Recovery DVD.

    When it worked fine all day restored (had internet access via the network) until I clicked on: set up a home network or small business in the control panel. He crashed again in the same way. Now it will crash repeatedly like above.

    This could be a problem with my cable?
    Help, please... Any ideas?

    Thank you for the charges,
    Shay

    Hello

    If the network connection works fine, it is not necessary to set it up again. I guess there are conflicts and the unit freezes. In my opinion there is no problem with the hardware or with your cable with the network settings.

  • Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.

    Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.   I need the laptop screen too.  It started just after years of correct use.

    Original title: VGA:

    In Panel > all items in the control panel > display > screen resolution you should be able to see the two devices / displays and be able to set options...

    http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  • The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

    The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

    Original title: clear the display

    Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

    Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

    You can now close the Power Options pane when you return.

  • Compaq 6910p - wireless adapter turns off when the ethernet cable is connected

    Hi all

    Then, when I plug in an ethernet cable (connected to a router), my wireless adapter turns off.

    He immediately turns on when I unplug the ethernet cable.

    It isn't really a problem, either connection will provide my needs of networking, but it's just weird and I don't like it.

    Using Win7 Ultimate 64 bit.

    advice would be appreciated.

    Hello:

    This is the default setting to save the battery.

    If you always want the wireless on, go into BIOS > Menu of device Configuration and activation to deactivate WLAN-LAN.

  • Satellite C660 - 115 WLan connection only works when the power cable is connected

    Hello

    A few weeks ago, I bought a Satellite C660-115. I want to surf the internet anywhere in my house without any son/cables.
    On the first day, I had this problem: when I disconnect _power_ cable, the wireless connection will stop working.

    The Web page on my screen will always be there, but a new page loading is a problem.
    It is sometimes useful to recharge (by pressing F5), - sometimes not. It is always useful to "ip address of repair", but not for long.

    The only solution is to atach regardless of how much power the battery has still the power cord.
    When I do, it is no problem whith the connection at all.
    I went back to the store where I bought it, they related to their own wireless network and they have had the same problem after a few minutes. In the shop too attach the power cable solved the problem.

    So the problem must be in my lap top, not in my network (modem or almost).

    Doesn't this all seem familiar, and if so, how can I solve this?

    I hope that my English is understandable, I live in Holland.
    Thanks in advance!

    Here is the solution:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59177

    Change options for saving for the Wlan in Windows 7 power management

  • HP ATI Radeon HD 7450: Video card puts all monitors to sleep when the HDMI cable is connected

    I'm having a problem with a brand HP ATI Radeon HD 7450 part number 672459-001. When I plug a cable HDMI card put the monitor in standby. And when I unplug cable HDMI, the screen stays off until I restart the computer. The HDMI cable needs to be connected to anything in this case. It makes me batty to be honest

    Jim Hutto
    I do not work for HP.
    I am a computer technician and a passion for computing with more than 32 years of computer repair and networking experience

    Never mind, figured it out. It is the HDMI2av converter. The converter might work power HDMI port or a separate power connection. The card is not enough voltage to run it. Then when I plugged it without external power supply it would draw so much tension that he caused the GPU to lock up.

  • Satellite X 200 SLI falls down when the HDMI cable is connected

    Hello world

    I'm very sad about this. You just bought a new brand Toshiba x 200 SLI and I get a crash (blue screen on Vista) when I plug the HDMI on my Philips Full HD TV.

    I did not almost any update, but still, this shouldn't happen on arrival!
    Clues?

    Many thanks for any help on this!

    Hmmm this error is known to me, but unfortunately it is not easy to tell what's exactly wrong or what causes this problem.

    Sometimes this BSOD could be linked to the issue of driver/software, but the last time I received this message on my 5 year old laptop and finally I discovered that one of my modules of memory was defective!

    However, this laptop was equipped with two GPU chips then perhaps there could be something wrong who knows?  :|

    But it s very strange that in this case using the HDMI port to my knowledge only this satellite X 200 series are supported by a standard HDMI V1.2 (up to 1080i).
    Did you use the right cable?

    As you can see an investigation is necessary to locate the cause of the error.

    If there is something wrong with the hardware I would recommend contacting the ASP in your country in order to clarify this strange issue.

    Good luck

  • Computer laptop screen goes black when the HDMI cable is connected

    Help me please

    A few days before, after upgrading to windows 7 from Vista.  I got my laptop connected to my 47 inch Phillips with HDMI and was doing great.  The next day there was significant (about 40 of them, hardly some I'm sure) updates of microsoft; my laptop kept reset rear to decrease the resolution after the system has rebooted, instead of the 1920 x 1200 I usually.

    Anyway, at this point on whenever I plug the HDMI Cable my computer screen making mobile curtains blackout and nothing he will answer to display anything...  I had to unplug the cable and reset it réinitialisez_(: (afin d'obtenir l'écran d' ordinateur portablepour)  If I let the plugins of HDMI cable, it will be blackout after it surging, the ms logo.

    Please help me.  Below you will find all the info about my M17x so-called:(honnêtement, n'achetez pas d'ordinateur portable Alienware.)  This thing cost me 5 k and there was nothing else to headaches.  He is a year old and I have no warranty left, so I must rely on the computer guru like you to help me.  Thanks again for the help.

    II. Configuration


    Processor (s)

    • Processor - 1

      • CPU_Name-Intel (r) Core (TM) 2 Extreme CPU Q9300 @ 2.53 GHz
      • CPU_Manufacturer-GenuineIntel
      • CPU_Caption-Intel64 family 6 model 23 Stepping 10
      • CPU_Version-model 7, walk 10
      • CPU_ProcessorId-BFEBFBFF0001067A
      • CPU_CurrentClockSpeed - 2534 MHz
      • CPU_AddressWidth-64 bit
      • CPU_DataWidth-64 bit
      • CPU_SocketDesignation-Socket 479


    Case color - black


    System memory

    • Memory-1 module

      • Mem_Capacity - 4096MB
      • Mem_BankLabel-DIMM #1
      • Mem_Type-DDR3
      • Mem_Frequency-MHz
    • Memory Module-2
      • Mem_Capacity - 4096MB
      • Mem_BankLabel-DIMM #2
      • Mem_Type-DDR3
      • Mem_Frequency-MHz


    BIOS information

    • BIOS_Manufacturer-Alienware
    • BIOS_Name - worm 1.00PARTTBL A01
    • BIOS_Version1-A01
    • BIOS_Version2-ALWARE - 6040000


    Information of the motherboard

    • MB_Manufacturer-Alienware
    • MB_Product
    • MB_SerialNumber-.4Q9V4K1. .
    • MB_Version-A01


    Video adapter

    • Video_Caption-NVIDIA GeForce GTX 280M
    • Video_AdapterRAM - 1024Mo
    • Video_DriverVersion - 7.15.11.7985


    Hard drives

    • SSD SAMSUNG PM800 Se SCSI Disk Device

      • Disk_Model - SSD SAMSUNG PM800 Se SCSI Disk Device
      • Disk_Size - 256GB
      • Disk_TotalHeads - 255
      • Disk_TotalCylinders - 31132
      • Disk_TotalTracks - 7938660
      • Disk_TracksPerCylinder - 255


    Optical drives / other storage

    • TSSTcorp DVD +-RW TS-T633A SCSI CdRom Device


    OS - MS Vista Home Premium 64


    Version of DirectX-10


    Assembler initials-RR


    Initial Tester - HAVE


    Test Date-09/07/2009 03-23 h


    Burn-In/benchmarks

    • 3DMark Vantage 1.01

      • AWMarks AWMark Score - 10659
      • Graphics Score - 10850 Points
      • CPU Score - 10125 Points
      • Figure 1 - Jane Nash - 31 FPS test
      • Test chart 2 - new FPS from Calico-32
      • Test CPU 1 - Test of the Plans/S I-1364
      • CPU Test 2 - Physics-14 steps/S
      • Test 1 - Texture Fill - 1034 FPS featured
      • Test 2 - Color Fill - 5 FPS featured
      • Test 3 - POM-26 FPS featured
      • Function Test 4 - GPU Cloth-18 FPS
      • Function Test 5 - GPU particle-24 FPS
      • Function Test 6 - noise Perlin - 44 FPS


    The IRQ configuration

    • 0 - available-
    • 1 PS/2 standard keyboard
    • 2 - available-
    • 3 - available-
    • 4 - available-
    • 5 Ricoh Memory Stick Controller
    • 5 Ricoh SD/MMC Host Controller
    • 5 Ricoh xD-Picture Card Controller
    • 5 SDA Standard compatible SD Host Controller
    • 6 - available-
    • 7 - available-
    • 8 high precision event timer
    • 9 - available-
    • Infrared receiver ITECIR 10 (CBS)
    • 11 - available:
    • 12 Synaptics PS/2 Port TouchPad
    • Digital data processor 13
    • 14 RICOH OHCI Compliant IEEE 1394 Host Controller
    • 15 - available-
    • 16 NVIDIA nForce Serial ATA Controller
    • Standard enhanced PCI to USB Host Controller 16
    • 17 high Definition Audio Controller
    • 18 PCI standard PCI to PCI bridge
    • 18 standard enhanced PCI to USB Host Controller
    • NVIDIA GeForce GTX 280M 19
    • OpenHCD USB host controller standard 19
    • NVIDIA GeForce GTX 280M 20
    • 22 NVIDIA GeForce 9400M G
    • 23 Broadcom 802.11n network adapter
    • 23 NVIDIA nForce 10/100/1000 Mbps Ethernet
    • OpenHCD USB host controller standard 23
    • System compatible ACPI Microsoft 190


    Various


    Final control


    Installed device drivers

    • Microsoft adapter, 21/06/2006, 6.0.6001.18000
    • Intel (r) Core (TM) 2 Extreme CPU Q9300 @ 2.53 GHz, 21/06/2006, 6.0.6001.18000
    • Infrared receiver ITECIR (EC), 18/12/2007, 5.0.4.6
    • Standard keyboard PS/2, 21/06/2006, 6.0.6001.18000
    • Method of battery on the control compatible ACPI Microsoft, 21/06/2006, 6.0.6001.18000
    • Synaptics PS/2 Port TouchPad, 14/05/2009, 13.0.6.0
    • Enumerator Microsoft Bluetooth, 21/06/2006, 6.0.6001.18064
    • Bluetooth hands-free Audio, 28/01/2008, 6.1.0.4000
    • Bluetooth hands-free Audio., 01/28/2008, 6.1.0.4000
    • Bluetooth L2CAP interface, 23/01/2008, 6.2.0.1200
    • Bluetooth Remote Control, 28/01/2008, 6.1.0.4000
    • Audio stereo Bluetooth, 28/01/2008, 6.1.0.4000
    • Microsoft eHome Infrared Transceiver, 21/06/2006, 6.0.6001.18000
    • IDT High Definition Audio CODEC, 19/03/2009, 6.10.0.6162
    • Compatible device HID, 21/06/2006, 6.0.6001.18000
    • Device of consumer control in line with the HID, 21/06/2006, 6.0.6000.16386
    • Compatible device HID, 21/06/2006, 6.0.6001.18000
    • Keyboard Microsoft eHome, 21/06/2006, 6.0.6001.18000 remote control
    • Microsoft eHome MCIR keyboard, 21/06/2006, 6.0.6001.18000
    • MCIR 109 keyboard, 21/06/2006, 6.0.6001.18000 Microsoft eHome
    • Mouse compatible HID, 21/06/2006, 6.0.6001.18000
    • Compatible device HID, 21/06/2006, 6.0.6001.18000
    • Device keyboard HID, 21/06/2006, 6.0.6001.18000
    • Mouse compatible HID, 21/06/2006, 6.0.6001.18000
    • Device of consumer control in line with the HID, 21/06/2006, 6.0.6000.16386
    • NVIDIA GeForce GTX 280M, 23/04/2009, 7.15.11.7985
    • NVIDIA GeForce 9400M G, 23/04/2009, 7.15.11.7985
    • NVIDIA nForce 10/100/1000 Mbps Ethernet, 29/08/2008, 67.8.6.2
    • NVIDIA nForce Serial ATA Controller, 18/08/2008, 10.3.0.42
    • Ricoh Memory Stick Controller, 19/06/2008, 6.0.1.13
    • Host to the Standard SD compatible SDA, 21/06/2006, 6.0.6001.18000 controller
    • RICOH OHCI Compliant IEEE 1394 Host Controller, 21/06/2006, 6.0.6001.18000
    • Ricoh SD/MMC Host Controller, 09/09/2008, 6.0.3.19
    • Ricoh xD-Picture, 16/06/2008, 6.0.1.13 card controller
    • Broadcom 802.11n network adapter, 28/01/2009, 5.10.79.7
    • facap, FastAccess Video Capture, 24/09/2008, 8.7.1.0
    • Microsoft iSCSI Initiator, 21/06/2006, 6.0.6001.18000
    • TSSTcorp DVD +-RW TS-T633A SCSI CdRom Device, 21/06/2006, 6.0.6001.18000
    • SSD SAMSUNG PM800 Se SCSI Disk Device, 21/06/2006, 6.0.6001.18000
    • Shadow-generic volume, 21/06/2006, 6.0.6000.16386
    • Webcam integrated, 27/12/2008, 1.1.1.1227
    • USB Human Interface device, 21/06/2006, 6.0.6001.18000
    • Generic Bluetooth adapter, 21/06/2006, 6.0.6001.18064
    • USB Human Interface device, 21/06/2006, 6.0.6001.18000

    Do not forget that this upgrade to Windows 7 now.  Thank you

    My best guess, not knowing what updates you have loaded, would be that you got a video update from Microsoft that may not be 100% compatible with your laptop.  I would go to the manufacturer website and download the latest video drivers for your laptop and install them according to the manufacturer's suggestions.

    "Vukne" wrote in the new message: * e-mail address is removed from the privacy... *

    Help me please

    A few days before, after upgrading to windows 7 from Vista.  I got my laptop connected to my 47 inch Phillips with HDMI and was doing great.  The next day there was significant (about 40 of them, hardly some I'm sure) updates of microsoft; my laptop kept reset rear to decrease the resolution after the system has rebooted, instead of the 1920 x 1200 I usually.

    Anyway, at this point on whenever I plug the HDMI Cable my computer screen making mobile curtains blackout and nothing he will answer to display anything...  I had to unplug the cable and reset it réinitialisez_(: (afin d'obtenir l'écran d' ordinateur portablepour)  If I let the plugins of HDMI cable, it will be blackout after it surging, the ms logo.

    Please help me.  Below you will find all the info about my M17x so-called:(honnêtement, n'achetez pas d'ordinateur portable Alienware.)  This thing cost me 5 k and there was nothing else to headaches.  He is a year old and I have no warranty left, so I must rely on the computer guru like you to help me.  Thanks again for the help.

    / II. Configuration

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    /Processor (s)

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    * Processor - 1
    * CPU_Name-Intel (r) Core (TM) 2 Extreme CPU Q9300 @ 2.53 GHz
    * CPU_Manufacturer-GenuineIntel
    * CPU_Caption-Intel64 family 6 model 23 Stepping 10
    * CPU_Version-model 7, walk 10
    * CPU_ProcessorId-BFEBFBFF0001067A
    * CPU_CurrentClockSpeed - 2534 MHz
    * CPU_AddressWidth-64 bit
    * CPU_DataWidth-64 bit
    * CPU_SocketDesignation-Socket 479

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    Case color - black
    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    System memory
    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    * Memory Module-1
    * Mem_Capacity - 4096MB
    * Mem_BankLabel-DIMM #1
    * Mem_Type-DDR3
    * Mem_Frequency-MHz
    * Memory Module-2
    * Mem_Capacity - 4096MB
    * Mem_BankLabel-DIMM #2
    * Mem_Type-DDR3
    * Mem_Frequency-MHz

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    BIOS information
    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    * BIOS_Manufacturer-Alienware
    * BIOS_Name-worm 1.00PARTTBL A01
    * BIOS_Version1-A01
    * BIOS_Version2-ALWARE - 6040000

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    Information of the motherboard
    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    * MB_Manufacturer-Alienware
    * MB_Product
    * MB_SerialNumber-.4Q9V4K1. .
    * MB_Version-A01

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    Video adapter
    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    * Video_Caption-NVIDIA GeForce GTX 280M
    * Video_AdapterRAM - 1024Mo
    * Video_DriverVersion - 7.15.11.7985

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    Hard drives
    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    * SAMSUNG SSD PM800 Se SCSI Disk Device
    * Disk_Model-SAMSUNG SSD PM800 Se SCSI Disk Device
    * Disk_Size - 256GB
    * Disk_TotalHeads-255
    * Disk_TotalCylinders-31132
    * Disk_TotalTracks-7938660
    * Disk_TracksPerCylinder-255

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    Optical drives / other storage
    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    * TSSTcorp DVD +-RW TS-T633A SCSI CdRom Device

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    OS - MS Vista Home Premium 64
    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    Version of DirectX-10
    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    Assembler initials-RR
    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    Initial Tester - HAVE
    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    Test Date-09/07/2009 03-23 h
    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    Burn-In/benchmarks
    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    * 3DMark Vantage 1.01
    * AWMarks AWMark Score - 10659
    * Graphics Score - 10850 Points
    * CPU Score - 10125 Points
    * Test 1 - Jane Nash-31 FPS chart
    * Test 2 - new Calico-32 FPS chart
    * CPU Test 1 - Test of the Plans/S I-1364
    * CPU Test 2 - Physics-14 steps/S
    Have test 1 - Texture Fill-1034 FPS
    Have test 2 - Color Fill-5 FPS
    Have test 3 - POM-26 FPS
    Have test 4 - GPU Cloth-18 FPS
    Have 5 test - GPU particles-24 FPS
    Have test 6 - noise of Perlin - 44 FPS

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    The IRQ configuration
    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    * 0 - available-
    * 1 PS/2 standard keyboard
    * 2 - available-
    * 3 - available-
    * 4 - available-
    * 5 Ricoh Memory Stick Controller
    * 5 Ricoh SD/MMC Host Controller
    * 5 Ricoh xD-Picture Card Controller
    * 5 SDA Standard compatible SD Host Controller
    * 6 - available-
    * 7 - available-
    * 8 high precision event timer
    * 9 - available-
    * Infrared receiver ITECIR 10 (CBS)
    * 11 - available:
    * 12 Synaptics PS/2 Port TouchPad
    * Digital data processor 13
    * 14 RICOH OHCI Compliant IEEE 1394 Host Controller
    * 15 - available-
    * 16 NVIDIA nForce Serial ATA Controller
    * 16 standard enhanced PCI to USB Host Controller
    * 17 high Definition Audio Controller
    * 18 PCI standard PCI to PCI bridge
    * 18 standard enhanced PCI to USB Host Controller
    * NVIDIA GeForce GTX 280M 19
    * OpenHCD USB host controller standard 19
    * NVIDIA GeForce GTX 280M 20
    * 22 NVIDIA GeForce 9400M G
    * 23 Broadcom 802.11n network adapter
    * 23 NVIDIA nForce 10/100/1000 Mbps Ethernet
    * OpenHCD USB host controller standard 23
    * System compatible ACPI Microsoft 190

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    Various
    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    Final control
    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    http://social.answers.Microsoft.com/forums/en-us/HR.gif>
    Installed device drivers
    http://social.answers.Microsoft.com/forums/en-us/HR.gif>

    * Microsoft adapter, 21/06/2006, 6.0.6001.18000
    * Intel (r) Core (TM) 2 Extreme CPU Q9300 @ 2.53 GHz, 21/06/2006, 6.0.6001.18000
    * ITECIR Infrared Receiver (EC), 18/12/2007, 5.0.4.6
    * Standard PS/2 keyboard, 21/06/2006, 6.0.6001.18000
    * Method of battery on the control compatible ACPI Microsoft, 21/06/2006, 6.0.6001.18000
    * Synaptics PS/2 Port TouchPad, 14/05/2009, 13.0.6.0
    * Microsoft Bluetooth enumerator 21/06/2006, 6.0.6001.18064
    * Bluetooth hands-free Audio, 28/01/2008, 6.1.0.4000
    * Bluetooth hands-free Audio., 01/28/2008, 6.1.0.4000
    * Bluetooth L2CAP Interface, 23/01/2008, 6.2.0.1200
    * Bluetooth Remote Control, 28/01/2008, 6.1.0.4000
    * Bluetooth stereo Audio, 01/28/2008, 6.1.0.4000
    * Microsoft eHome Infrared Transceiver, 21/06/2006, 6.0.6001.18000
    * IDT High Definition Audio CODEC, 19/03/2009, 6.10.0.6162
    * HID-compliant device, 21/06/2006, 6.0.6001.18000
    * Device control HID-compliant consumer, 21/06/2006, 6.0.6000.16386
    * HID-compliant device, 21/06/2006, 6.0.6001.18000
    * Microsoft eHome Remote control keyboard keys, 21/06/2006, 6.0.6001.18000
    * Microsoft eHome MCIR keyboard, 21/06/2006, 6.0.6001.18000
    * Microsoft eHome MCIR 109 keyboard, 21/06/2006, 6.0.6001.18000
    * Mouse compatible HID, 21/06/2006, 6.0.6001.18000
    * HID-compliant device, 21/06/2006, 6.0.6001.18000
    * HID Keyboard Device, 21/06/2006, 6.0.6001.18000
    * Mouse compatible HID, 21/06/2006, 6.0.6001.18000
    * Device control HID-compliant consumer, 21/06/2006, 6.0.6000.16386
    * NVIDIA GeForce GTX 280M, 23/04/2009, 7.15.11.7985
    * NVIDIA GeForce 9400M G, 23/04/2009, 7.15.11.7985
    * NVIDIA nForce 10/100/1000 Mbps Ethernet, 29/08/2008, 67.8.6.2
    * NVIDIA nForce Serial ATA Controller, 18/08/2008, 10.3.0.42
    * Ricoh Memory Stick Controller, 19/06/2008, 6.0.1.13
    * Host to the Standard SD compatible SDA, 21/06/2006, 6.0.6001.18000 controller
    * RICOH OHCI Compliant IEEE 1394 Host Controller, 21/06/2006, 6.0.6001.18000
    * Ricoh SD/MMC Host Controller, 09/09/2008, 6.0.3.19
    * Ricoh xD-Picture Card Controller, 16/06/2008, 6.0.1.13
    * Broadcom 802.11n, network card, 28/01/2009, 5.10.79.7
    * facap, FastAccess Video Capture, 24/09/2008, 8.7.1.0
    * Microsoft iSCSI Initiator, 21/06/2006, 6.0.6001.18000
    * TSSTcorp DVD +-RW TS-T633A SCSI CdRom Device, 21/06/2006, 6.0.6001.18000
    * SAMSUNG SSD PM800 Se SCSI Disk Device, 21/06/2006, 6.0.6001.18000
    * Snapshot of generic volume, 21/06/2006, 6.0.6000.16386
    * Integrated Webcam, 27/12/2008, 1.1.1.1227
    * USB Human Interface Device, 21/06/2006, 6.0.6001.18000
    * Generic Bluetooth adapter, 21/06/2006, 6.0.6001.18064
    * USB Human Interface Device, 21/06/2006, 6.0.6001.18000

    Do not forget that this upgrade to Windows 7 now.  Thank you

  • laptop loses picture when the hdmi cables are connected

    laptop loses picture when I connect the laptop HDMI cable to HD TV

    Help, please.

    Thank you.

    Try pressing your "fn + f5" together until both monitors are on. The combination of keys is to pass between the monitors. In your case, the first time, it should turn on the laptop screen and turns off the second monitor, the second must turn them both on. On some computers, it's the f4 key and on dell is the f8 key, the key is usually the image from one monitor to this topic.

  • The blue windows screen Driver_irql_not_less_or_equal 7 when connecting the LAN cable?

    Hi all,
    I just want to ask how to solve Driver_irql_not_less_or_equal windows 7 blue screen when connecting the LAN cable?
    pls help me...
    Thanks in advance...

    We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

    You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

    If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

    To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

    The procedure:

    * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
    * Zip up the copy.
    * Join ZIP archive to your message by using the button (attachments) "trombone".
    * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

    To ensure the minidumps are enabled:

    * Click Start, in the search box, type: sysdm.cpl, press ENTER.
    * On the Advanced tab, click Startup and recovery... Settings button.
    * Make sure that automatically restart is unchecked.
    * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
    * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.

    Please also run MSinfo32 and download the output as well.

    To run MSinfo32 please go to start > run > MSinfo32
    Go to 'file', 'save' and download the PDF is saved with the DMP
    (Instructions for XP, Vista, Win 7, Win 8)

  • HP laptop: unable to identify the lan cable connection

    Microsoft Windows [Version 6.3.9600]
    (c) Microsoft Corporation, 2013. All rights reserved.

    Rodriguez C:\Users\anshu > ipconfig/all

    Windows IP configuration

    Name of the host...: fadiga
    Primary Dns suffix...:
    Node... type: mixed
    Active... IP routing: No.
    Active... proxy WINS: No.
    ... DNS suffix search list: Working Group

    Ethernet connection to the Bluetooth 2 network card:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Device Bluetooth (personal area network)
    #2
    Physical address.... : B0-10-41-80-AF-1E
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    Local Area Connection wireless LAN adapter * 5:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft Hosted network virtual card
    Physical address.... : B0-10-41-80-AF-1E
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Local Area Connection wireless LAN adapter * 2:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft Wi - Fi Direct virtual card
    Physical address.... : B0-10-41-80-AF-1F
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    Wi - Fi wireless LAN adapter:

    The connection-specific DNS suffix. : Working Group
    ... Description: RT3290 Ralink 802.11bgn wireless adapter
    Physical address.... : B0-10-41-80-AF-1D
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::e809:c01a:618f:7b5a %4 (Preferred)
    IPv4 address...: 192.16.137.4 (Preferred)
    ... Subnet mask: 255.255.255.0.
    Lease obtained...: Saturday, June 11, 2016 08:56:13
    End of the lease...: Wednesday, June 15, 2016 12:56:15
    ... Default gateway. : 192.16.137.1.
    DHCP server...: 192.16.137.1.
    DHCPv6 IOOKING...: 78647361
    DHCPv6 DUID customer...: 00-01-00-01-1C-FA-E4-80-14-58-D0-C5-74-1D

    DNS servers...: 10.10.2.2.
    192.16.137.1
    NetBIOS over TCP/IP...: enabled

    Ethernet Ethernet adapter:

    The connection-specific DNS suffix. :
    Description...: Realtek PCIe FE Family Controller
    Physical address.... : 14-58-D0-C5-74-1D
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::3070:15bf:b1ee:daab %3 (Preferred)
    Autoconfiguration IPv4 address. . : 169.254.218.171 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    DHCPv6 IOOKING...: 51665104
    DHCPv6 DUID customer...: 00-01-00-01-1C-FA-E4-80-14-58-D0-C5-74-1D

    DNS servers: fec0:0:0:ffff:1 1%
    FEC0:0:0:FFFF:2 1%
    FEC0:0:0:FFFF:3 1%
    NetBIOS over TCP/IP...: enabled

    Card tunnel Teredo Tunneling Pseudo-Interface:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Teredo Tunneling Pseudo-Interface
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card adapt 6TO4 tunnel:

    The connection-specific DNS suffix. : Working Group
    ... Description: Microsoft 6to4 card
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes
    IPv6 address: 2002:c010:8904:c010:8904 (Preferred)
    ... Default gateway. :
    DHCPv6 IOOKING...: 704643072
    DHCPv6 DUID customer...: 00-01-00-01-1C-FA-E4-80-14-58-D0-C5-74-1D

    DNS servers...: 10.10.2.2.
    192.16.137.1
    NetBIOS over TCP/IP...: disabled

    Tunnel adapter ISATAP.workgroup:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. : Working Group
    ... Description: Adapter Microsoft ISATAP #5
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {74914F29-E819-4DEB-8CC2-D37CBFD70F3B}:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Adapter Microsoft ISATAP #6
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Rodriguez C:\Users\anshu >

    On the lan cable connection, it says as unidentified network.

    That's what I have to type the command ipconfig/all.  I tried to reinstall drivers recvoery as Manager, but no results. It worked without problem until now

    @anshu645

    Home networks typically use a form any of 192.168.x.x

    For example:

    192.168.1.14

    Found in your example:

    192.16. 137.1

    Also found:

    Autoconfiguration IPv4 address. . : 169.254.218.171

    +++++++++++++++++++++++++++++++++++++++++++++

    I suspect that the installer with your home network router is misconfigured and the network can't find a viable (useful) DNS address to use for the purpose of ISP Internet Service (ISP) connection.

    Please see the following:

    HP PC - troubleshooting wired home networks (Windows 8)

    HP PC - Troubleshooting wireless network and Internet (Windows 8)

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

  • Toshiba NB550-111 - no connection if the LAN cable is more than 2 metres

    Hello

    My newly purchased Toshiba NB550-111(Windows 7 Starter Service Pack 1) has problems with the LAN card.
    If the LAN cable is more than 2 meters, no relation to Allied Telesyn switch (no indicator led on the switch, 2 other desktop computers already connected). I tried not to connect in a different port (one used previously by one of desktop computers), no connection. I tried with 3 cables, still no results.

    Cables (cat5E, so important) have been tested OK before with a cable Tester, and I use both of them without any problem with another 2 desktop computers at home. I set another cable (5 m long, newly purchased) and tested for connectivity. It works very well with the other two offices, no results with the netbook. I tried with adapter it works, I disabled ' energy efficient ethernet "NIC, still no connection properties page. It only connects if the cable is less than 2 meters. I tried to connect the netbook directly to the DSL router, still no connection with a longer cable.

    The device is reported by windows as work very well, and the test Toshiba utility ends there is no problem. Windows I configured in the Control Panel, the Plan balanced for maximum performance in the power options, still no results.
    Any ideas, please?

    Now maybe stupid question but what is with WLAN? You don t want to use WLAN?

  • After I start my computer dell laptop I connect the LAN cable to run internet ON my laptop but it doesn't detect LAN cable

    Hello..

    After I start my computer dell laptop I connect the LAN cable to run internet on my laptop but it does not detect the LAN cable, using the ultimate32 bites. (But if I connect LAN canble then start computer it works fine)

    Hello

    1 windows operating system is installed on the computer?

    2. do you think that no matter what error message in Device Manager? If Yes, what is the full and exact error message?

    3. What is the number of brand and model of the computer?

    Method 1:

    If you are using Windows 7, I suggest to see the link and try to run the troubleshooter and check if it works.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    The link applies to the Windows Vista and Windows 7 operating system.

    Method 2:

    Check the link and try using the network troubleshooter to fix the problem.

    Using the troubleshooter from network in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    See also:

    Use Network Troubleshooter event logs to solve network problems

    http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

    Method 3:

    See the link and check if it helps.

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

    Let us know if it helps.

  • N300 not see the Lan cables

    Hello world!

    After the oath to a customer support agent, I decided to turn to the community that might better support than support Netgears AWEFUL!

    I tried a modem LAN cable connected to my PC, but nothing lights up on the modem telling me its plugged in, and nothing on the PC tells me that the LAN cable is pluged. I tried 2 different PC with 2 different LAN cables, both having same issue.

    Help, please!

    Kevin

    ZS - KEV

    Sorry I worded wrong, but in Network Center and sharing, then click on change adapter settings here you will see your connections and you can right click and allow it.

    DarrenM

Maybe you are looking for

  • My search bar is 'stuck' on yahoo and not leave without search engines. How can I fix it?

    When I hit the drop of the search bar and try and select another search engine, it does not work.I used to get a pop up asking if I wanted to use the other site, but who was also arrested. I just want to be able to switch between search engines

  • Cannot restart after a repair disk Warrior

    I have an iMac 27 "(2010, je pense) running 10.11.2 and a terabyte of hard drive, which is more than half full."  He has been doing progressively slower for some time, so I bought Disk Warrior to rebuild the directory and, hopefully, speed things up.

  • VN7 791G - does not start the Windows operating system

    So I got my Acer VN7 - 791 G for 5 months now and until last month, everything was going fine until suddenly, the system has become VERY slow (operating system and programs have been suspended) and the boot process has long redicilously. To exclude a

  • While a printer ink levels

    I have a HP Photosmart Plus B210. Is there a way to know what ink cartridge is low? I don't want to change all if one is necessary.

  • Transfer of visualizations for Windows Media Player 12

    I have two computers. My office is a Windows XP Home Edition and my laptop is a Windows 7 Professional edition. I was wondering if it is possible to somehow get the visualizations of my Windows XP Media Player 9 converted to work on my Windows 7 Medi