No link between IOM port 2/2/3 and fabric B interconnection

Hello

I am removing an uplink of the IOM to the fabric of interconnection in accordance with its not.  I tried to reset the module e/s and re - emphasize the chassis with no luck, it is still displayed in the GUI with the error message as in the subject.  We are running 2.0(1s).  The kit is not yet in production.

Thanks for any help

Hi barry,.

The only way for you to clean up which will be de-Commission of the chassis in question and add it back again.

Thank you!

. / Afonso

Tags: Cisco DataCenter

Similar Questions

  • The easiest way to support the call between the ports of SPA-8000 and 2 GWs?

    My group of Silicon Labs is interested by using several SPA-8000 s to configure the VoIP impairment test systems for use with our data and fax modems.  (Coincidentally, ports FXS SPA-8000 use our devices Si3215 SLIC).  The SPA-8000 s will not interface with an ITSP or PSTN, but we do not have a deficiency of external network device (Shunra VE unit), we will use to undermine statistically VoIP packets.

    I saw the note of analog, IP/PBX solution phone app, but I like to keep installation as simple as possible (i.e. use only 8000 s-SPA without a SPA-9000).  It is possible to make calls to port - au port uses only the SPA-8000 and an external router (i.e. without an ITSP or SIP server)?  The SPA Administration Guide - 8000 stipulates that FXS-to-FXS connectivity is possible using an IP router controlling crossed, but provides no specific information. Can you recommend a Cisco/Linksys router that allows this?

    Thank you

    Bob Giaraffa

    Dear Sir;

    This is possible. All you have to do is connect the two SPA8000 to a router that provides IP addresses. Easier configuration, each SPA8000 WAN IP address to static.

    On each device, all you have to do is:

    -[Line x] appeal without reg Yes

    -[Line x] years call without reg toYES

    -Define a (digital) user id - this is what the other pty faces

    -On the defined proxy ip_address:port the FXS port to the other device that you want to set the line (it's one by one). First port is 5060, 5061 second and so forth...

    Submit the changes

    concerning
    Alberto

  • Link between AP invoice lines report iExpense and Distributions

    Hello

    Is there a direct way to query cost report line info distributions AP invoice information? I'm looking for it, but no direct link not found. EBS 11 5 10 2 version.

    Thanks in advance.

    .. AG

    Hello

    Sorry about that. The ap_expense_report_headers_all.vouchno field is populated with the finished ap_invoices_all invoice_id export to the AP.

    Please note that if the vouchno = 0, then the header of the expense report has not yet been imported.

    Cheryl

  • No link between the IOM, 1/1/3 and has 1/3 FI

    Hello

    When we first set up our UCS we connected all four of the IOM fabric interconnect Ports but now we wanted to remove both of them in order to save some ports on the FI. We configured the ports of #3 and #4 on the two FIs server and subsequently removed the cables.

    However, now that we receive the F0367 error message "no connection between IOM port 1/2/3 and fabric interconnect B:1 / 3" for all fabric ports where we have removed the cables.

    Same definition of chassis discovery 2 links and re-recognition strategy has not solved the errors.

    Does anyone knows how to fix this?

    Concerning

    Hello Lorenz,

    Are what version of the UCS you currently?

    Also see loss of traffic on the blades for which these flaws are high?

    I guess you hit the following bug: CSCtg74026 (compensation of IOM defects: not after change of political discovery chassis)

    This has been fixed in the current relase of 1.4. However, the solution is to make a chassis of comission and the re-discovery.

    I hope this helps!

    . / Afonso

  • Aggregation of links between poerconnect 5324 and poweredge with broadcom adapter

    I am looking for information on how to build an aggregation of links between my powerconnect and three cards broadcom on my server. I want to create a bandwidth of 3 GB.

    I created a team with suite ABEC 3.

    My network have 2 VLANS.

    At this stage, I could ping my server network, and I can ping the server in my network.

    When I defined the three ports of the switch (where three cards are connect) as LASG and I defined in belonging to a VLAN these three ports whose status is F, I ping the server from the network, but I can't ping the server network.

    Could someone tell me how I could build this bandwidth betwween my powerconnect, and poweredge?

    Thanks a lot for your help.


  • Best link between SG500-52?

    Hello

    What is the best (fastest) way to interconnect two SG500-52?

    I'm on a budget of 2.5 k 30 ports floor 1 & 2, 30 floor gigabit. The bandwidth on the network is not very high, but the link between the two switches would be the neck of the bottle I think. What can I do to optimize the flow on this link? I can pull the fiber or several cat 6 cables, but I can't use the coaxial cable of 5 metres 5G (there is no other option to use this port as 5G?) because of the physical distance between the switches.

    I would be able to create an OFFSET on both switches Say 5-10 (normally access ports, not the uplink (sfp) ones) ports?

    Or for the budget, any configuration with 2960's would fit (better)?

    Sg500 use the 5 gig links or if youre on budget, 8-port aggregation of links. SG500X would be the 10 gig links

    -Tom
    Please mark replied messages useful

  • database link between databases with the same name

    Hello
    I need a link to db between two databases are named the same way on two different servers.
    1 has a dev1 and Server2 database server has a database of dev1. The tnsnames on server2:
    DEV1 =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = server2) (PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = DEV1)
    )
    )

    DEV1_server1 =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = server1) (PORT = 1521))
    )
    (CONNECT_DATA =
    (SERVICE_NAME = dev1)
    )
    )

    Can someone let me know a way to create a data link between the previous two?
    Thank you.

    This should work:

    create the '' link of the public database
    to connect to
    identified by ''.
    using '(DESCRIPTION =)
    (ADDRESS_LIST =
    (ADDRESS =
    (COMMUNITY = tcp.world)
    (PROTOCOL = TCP)
    (Host = )
    (Port = 1521)
    )
    )
    (CONNECT_DATA = (SID = )
    )
    )';

  • Link between my windows live account and my sons Xbox account.

    My windows live account and password is good, but my son uses Xbox live.  I have the preferences set for my son on our PC using my account families.  When my son is in his Xbox live account it asks for my sign in but does not accept my password.  I do not understand the link between my email account and family Xbox preferences.  Can help you.

    Hello and welcome to help of Microsoft answers forums dealing with mainly Microsoft Windows or Windows applications installed on the local computer. You will be able to get a faster and better informed answer to your question by posting in the foums dedicated below. Note that, despite the similarity of names Windows Live and XBox Live are two very different things.

  • How can I fix the link between adobe and windows if I see .pdf not win32 application

    How can I fix the link between adobe and windows if I see .pdf not win32 application, without the disc?

    "Adobe" is the name of the company that provides a great many different applications.

    Adobe Reader is free and allows you to view pdf files.

    Adobe Acrobat is expensive and allows you to create, edit and view pdf files.

    Assuming that you are referring to the reader, uninstall all the versions of it using the control panel > add or remove programs.  Then either

    1. go to http://get.adobe.com/reader/?promoid=BUIGO and download the current version (remember to uncheck the box to install McAfee Security Scan Plus.

    or

    2. go to http://www.foxitsoftware.com/Secure_PDF_Reader/ and download Foxit Reader, a small pdf reader and many more.

    Then, install the reader that you have downloaded.

  • Link between ITC and CallManager Server

    Hi list;

    The link between the CallManager and the CTI server is done via JTAPI or one Trunk IP (as gatekeeeper of access using H.323 or SIP controller and so on)?

    Concerning

    Bilal

    Bilal,.

    If you plan to deploy the IPCC with Avaya or Nortel, he has no problem using CT Connect as a CTI server. In this case you don? business ICT or CTIOS need t. I have a deployment with ten Avaya Definity and ICM is used for intelligent routing between the ten Avayas and Envox CT Connect is the CTI server for the agents.

    You can not use CT Connect with the IPCC and CallManager, for later call center, because CT Connect do? do not provide Contact Center functions: login, logout, ready, etc. With the IPCC and CallManager, you can use CTIOS.

    For Avaya, Nortel and other OBXs, Envox CT COnnect provides functionality to connect, disconnect and change the status of the agent. For CallManager only provides functions of phone or the duties of the agent.

    Juan Luis

  • Maintaining links between PDFs converted from source (Word) files

    Hello

    If I have two Word files and manage the links between them (hyperlink on one specific bookmark on the other), is there a way to easily remember (or reproduce) these links on PDF files converted from Word files?

    Here's what I've tested so far.

    -On the source file, the format of the hyperlink is "{filename} .docx #{bookmarkname}. I changed the extension of docx to pdf.

    -Source/target to convert Word files to PDF format.

    -The hyperlink on the converted source PDF is in the format "file:///{targetpath}/{targetfile}%23{bookmarkname"}

    -When I click on the hyperlink on the converted source PDF, security warning pops up with "this document tries to connect to...". »

    -If I click on 'Allow' on the pop-up, the web browser opens with "cannot display this page" error. "


    I guess that by using the hyperlink is not a viable solution. If the links do not work, do the following manually?


    - source file Word, remove all hypertext links (because they do not work on PDF even when)

    -convert files to PDF format

    -on target of PDF, the value named destinations on the points corresponding to Favorites

    -on the source PDF, find points corresponding to hyperlinks and define the links to destinations named on target PDF.


    (Actually the situation is more complicated because files are shared at the chapter level and they should be merged for each new version.)


    If there is a simpler method to achieve this, I would appreciate your help.











    That's why your problems... You use the PDFMaker plugin, IE the Acrobat Ribbon.

  • Using the link between PDFs on a local PC (not on the web)

    Hello

    I am creating a PDF with links to specific locations on external PDF.

    Web search shows that we can do this by adding pages or named destination for the link.

    My question is made of "binding" between documents on PC work local open in Acrobat (Reader) recovered himself, instead of the documents on the web and the web browser via the plug-in?

    One related answer on thread on another forum (creation of a link to a pdf to mark an another pdf - Adobe Acrobat Windows) indicates that this feature works only when the PDF file is retrieved from a web server.

    If this does not work, could someone explain the technical background?

    My client wants to use the link between the files on the PC, so I need to make my client to know why it won't work.

    Thank you.

    I think that the page you found makes it more complicated, not less. In my view, in part because there are several different problems mixed with each other.

    The easiest way to post a link to a page in another PDF file is EXACTLY the same as link to a page in the same PDF: just create a link to GO to the VIEW. It's obvious only when we know, so people often end up with alternatives that are unnecessarily complicated.

    Named destinations are complicated, but they are good if you may need to change the target file and the file source link in the right place, even if it's another page. They need careful planning and a systematic approach.

  • Obtaining huge Ariane in Dashboard using links between action pages

    Hello

    My question is simple: I have a dashboard with 3 pages. I created links between these three action pages. The user can then navigate between the pages by clicking the columns with the action links in the analysis.

    The problem is that the user can also navigate between the 3 pages by using the tabs in the dashboard. This creates a huge fool of Ariane!

    Action is to have a link between the pages of dashboard is recommended? I feel that I am doing this wrong.

    Thank you for your help,

    João

    You can hide these pages of dashboard.

    Thank you

    http:/cool-bi.com

  • I got a prob while creating a link/link between two tables in a jdeveloper11g

    Hi guys...

    I got a prob while creating a link/link between two tables in a jdeveloper11g, help me.

    I use two table employee, Department.

    Unfortunately there is no primary key and foreign key in these tables.now i updated on those of table structure.

    I want to create a form like it should be a link between the Department data, i.e. data and employee while the Department is changed then only present corresponding employees in this block...

    Table structure as follows

    Employee:

    -------------------

    employe_id,

    name,

    Department,

    GR,

    Date of birth

    Department of justice

    Department:

    --------------------

    department_id,

    department_name;

    Note: in the employee department table is the same as in the department table department_id...

    So, you want to build master / detail between Department & sub_departments?

    In the same way, create a new, yet another link between departments & sub_departments, so that the connection is:

    Department.Department_Id = sub_departments.department_id

  • Link between Outlook and Adobe

    I think that the link between Outlook and Adobe Standard XI is broken. What should I do

    NICOS,

    Thank you for your offer to help but I managed to solve the problem, I reinstalled using Deil digital delivery.

    Thanks again

    Barrie

Maybe you are looking for