No local/internet access

I have a NX700 with a built-in wireless function. When I go through the Setup program tries to connect to the internet, he noted only that the wireless connection was working, and internet access and local access failed. Also, if I try to use a wired connection - it's the same thing: it acknowledges the wired connection, but the local access and access to the internet that these two don't. It is not my router because other devices work. I spent 90 minutes on the phone with care, and they think that I must return to my tv.

I adjusted the security settings on the router, and it does not help. If anyone has suggestions on what to do, it would be greatly appreciated, because the back tv will be a chore.

Thank you!

I have the KDL40 - NX711 Wifi Tv and I have experienced the same problem when I changed my router. I am owner of a Netgear WNDR3700 and I had to exchange it because it was defective. The new router is exactly the same, and the TV can detect the SSID broadcast. When I entered my passode, TV would set up and come back with the message that Internet OK, has no Local access and Internet failed. It took several calls to Sony (who have no idea), Netgear and Comcast to realize that nobody could help. Eventually, I realized that I had to do a manual install and provide my TV with the primary IP address, subnet, default gateway and DNS address. I did not allow the proxy server at all. I was able to get this information through the control panel under Windows Vista. Click Network and sharing icon, under the wired home network click State view. Click the property box in the local area network box. The IP initially did not work, because it was already used by other wireless devices in the House. For example, I used 192.168.1 and TV it back foot. I logged on Netgear to see what devices were in use on which IP address, and I changed the last digit to a 192.168.8 (8), which was open. I hope this helps.

Tags: Sony TV

Similar Questions

  • found wireless local access device has no fa internet access

    Hello friends please help I have Sony model led tv KDL-32EX520 wifi ready I have brought a UWA BR100 for WIFI, IT DETECTS my wifi but it says:

    found wireless device
    local access failed
    Internet access failed

    Pls help me pls!

    Thank you for your post and welcome to the forums.

    Please click on the link and follow the troubleshooting steps:

  • How to block internet access to users on the local computer. The machine is sub domain control.

    How to block internet access to users on the local computer and the machine is in sub domain control.


    Thanks for posting your query in Microsoft Community.

    Your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

    Please post your question in the TechNet Forums.

  • T510 - wireless question - connects to the local network but no Internet access

    Hi all

    I have a laptop Lenovo T510 with Windows 7.

    Network adapter: Intel Centrino Advanced - N 6200 AGN with the version of the driver

    I am facing problem seroius in wireless connection at home, I am able to connect wireless instead of office and friends.

    Wireless Networks are detected and I can connect to WiFi by the way of the key. And the status is indicated and is connected but no internet access.

    Please help me to get this resolved.

    Thank you

    Pavan K

    Thank you all for your support and your help... its working fine after re-starting the router

  • no internet access at el capitan

    Mac Pro with El Capitan. No Internet access with any browser, but I can access the Internet using the recovery system (this is what I now use to access the site of discussion). Already verify permissions and fix them with disk utility. Other Mac connected to the same router (Apple) can access the Internet without problem.

    It seems I have to re - install El Capitan. Fix?

    How you access the Internet? Wired or wireless? Do you have a good IP address? (Note that the one that starts with 169.254 is NOT good.) What about the access with something else outside of a browser, such as the Mail app? Other devices on your local network can access the Internet?

    Good luck.

  • Extend my extreme network with another extreme - waiting for internet access

    Hello - I have a new generation Airport Extreme (let's call it Extreme1) connected to a Comcast modem and it works very well. The extreme will be the router that the modem has no router function. I'm trying to expand my network to another room with another extreme (let's call it Extreme2). I have a connection cable between two rooms. Extreme1 has an ethernet cable from one of its LAN ports connected on port WAN Extreme2. When I try to create a new network with Extreme2 (in aid of the same name, passwords, etc.) it does not work. He was suspended at the end when he is looking for a connection ("Waiting for internet access")-I did the following things based on what I read here:

    1. Changed IPv6 link local parameters
    2. Tried the whole upward on my Macbook and tried on my iphone
    3. The Wan first and then tried to change the configuration after you done for Extreme2 by creating a network
    4. Tried to create a network with Extreme2 connected directly to the modem
    5. Extreme2 factory reset after every attepmt

    And nothing works. Kicker is, I also have a reasonably new airport express and the same thing happens to her as well.

    Do I need to adjust some parameters of network that I'm not aware of? Is it possible that my LAN ports are disabled on Extreme2? It is brand new.

    Thanks for any help.

    Have you used the Apple Setup Assistant?  If you did, it had notified you that the extreme second was being configured "add using Ethernet. The wizard will automatically configure the second airport with the appropriate settings for you.  All you have to do is enter a name of device for the second AirPort Extreme.

    Here I'm assuming that you reset the second extreme to parameters by default until you set it up again and that your second Extreme is the current version of the "tower" or that of previous versions "flat or square.

    The example below shows an AirPort Express as the device which is the extension of the network, but you will see the name of your network and AirPort Extreme on your configuration screen.

    Post back if you need some tips on using the "Wizard" for your configuration.

  • Equium P200 status 'connected' but not internet access.

    I have an Equium P200 and finds it difficult to connect to a wireless network.

    I have the wireless key and all the information is correct.
    Status is connected to the network, but I have no internet access and the message is: connection to the local network only.
    I live with two other people who have access, but I can't access the internet.

    How can I change this?
    Thank you.


    Please check in the WLan settings if the TCP/IP protocol settings are set to automatic.

    Usually, the WLan router supports a range of IP addresses and assigns an IP address to the laptop of the range of IP addresses.

    You can find this setting here:
    ->-Connection network WLan-> properties > network connections (TCP/IP) Internet Protocol-> properties

    Also, check if your WLan encryption settings are right!

  • How to give a limitation of internet access to users via gpedit.msc?

    How to give a limitation of internet access to users via gpedit.msc


    Follow the below mentioned article:

    How to use the Group Policy Editor to manage the Local computer policy in Windows XP:

  • block internet access to members who

    The scenario is

    Server 2008 R2 edition OS.
    Roll of server's DNS, AD, and DC with NAT distributed to the local network configured for internet access.
    A DHCP server or a proxy server so itself is a default gateway and DNS for LAN users.  Very small local area network and all machines have IP, default gateway, and DNS configured manually.
    Advantage is the server machine can access the internet.
    AD users can access the internet.
    Downside is computer user who connects to a local computer, the credentials of the local user, also has internet access.
    Need solution for this query not implemented DHCP or a proxy server adding extra costs for the company.


    I suggest you according to the question in this forum and check if that helps:

    It will be useful.

  • Windows Vista Home Basic 'local only' access via ADSL router, broudband


    I've set up a new router broadband wireless ADSL to connect to my broadband existing Standard.

    The router is a Belkin F7D1401uk Surf N150 model.

    It is facing up and running and I can use other machines to connect to the internet through it. A netbook running Windos XP SP3 and a mobile phone (Nokia X 6), but my laptop main running Windows Viast Home Basic SP2 (32 bit) do not have wireless internet access.

    It is a Fujitsu Siemens Amilo Li 2727 laptop. If I connect to the new Belkin router using an ethernet cable, I can connect to the internet. But when I unplug the ethernet cable and turn on the WiFi I see a connection to the modem Belkin Wireless, but on an 'unidentified network' and with 'local access' only.

    Here is a copy of what I get when I run "ipconfig/all" at the command prompt:

    Windows IP configuration

    Name of the host...: Clare-PC
    Primary Dns suffix...:
    Node... type: hybrid
    Active... IP routing: No.
    Active... proxy WINS: No.
    ... DNS suffix search list: Belkin

    Wireless network connection Wireless LAN adapter:

    The connection-specific DNS suffix. : Belkin
    ... Description: Atheros AR5007EG Wireless Network adapt
    Physical address.... : 00-16-44-E8-64-2C
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::4d89:e63c:ba6c:1c4d % 11 (Preferred)
    IPv4 address: (Preferred)
    ... Subnet mask:
    Lease obtained...: April 3, 2011 15:59:55
    End of the lease...: May 11, 2147 00:41:44
    ... Default gateway. :
    DHCP server...:
    DHCPv6 IOOKING...: 268441156
    DHCPv6 DUID customer...: 00-01-00-01-13-A7-2B-7F-00-1F-16-00-9E-C4
    DNS servers...:
    NetBIOS over TCP/IP...: enabled

    Ethernet connection to the Local network card:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. : Belkin
    Description...: Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.0)
    Physical address.... : 00-1F-16-00-9E-C4
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 7:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Teredo Tunneling Pseudo-Interface
    Physical address.... : 02-00-54-55-4E-01
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 12:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. : Belkin
    ... Description: isatap. Belkin
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    So, it looks to me that use wireless I have an IP address and the default gateway and DNS servers are correct.
    But I do not understand why I "local access" only.

    Can anyone suggest what I can do to get my laptop connected wireless to the internet please?

    Kind regards

    Hello Ttard,

    Thanks for your post.  One of the solutions, I saw about this problem is to go to your system manufacturer's Web site and download / install the latest driver for your computer wireless.

    This thread is very long, but has some great troubleshooting in steps.

    Please let us know if this information helps with your problem.

    See you soon

  • Whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server.

    problem with connecting to the internet

    whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server, I looked for a solution for centuries now, and no one can seem to help me! Please someone help me?


    First off I'm going to assume that when you say "local internet only", you really mean "local only". Also, I'll assume you are using a router for internet connection broadband. If I am wrong, then you will have to describe the answer how you try to connect to the internet more in detail.

    First of all, your router. The indicators show that there is an internet connection? Consult the manual, which probably came on a CD with the router. Internet connection led can resemble a planet with rings or a circle with a lower-case i in the middle of it, or some other symbol. It can also have a caption saying 'internet' or 'connected '. If the router is not connected while your PC will not have access to the internet.

    Click the Start button and type "cmd" then press ENTER. In the window type (mainly black) which results in ipconfig and press to enter. Transcribe the results of the command ipconfig for a response.

    Your (wired or wireless) network card is set to automatically get an ip address? Otherwise, set it to do that and also to get information from DNS server automatically...

    • Right-click on the icon network at the bottom right of your screen, and then click Network and sharing Center
    • In network and sharing Center, click on manage the network connections (on the left)
    • Right click on 'Connect to the Local network' or 'Wireless Network Connection' depending on how you connect to the router
    • Click on select Internet Protocol Version 4 (TCP/IPv4), and then click the properties button
    • If things are not set to 'automatic', please note all numbers so that you can restore the settings if necessary
    • Make sure that "Obtain an IP address automatically" and 'DNS server automatically get an address' is selected, then click OK
    • Click on close

    If you are using a wireless connection, what happens if you try to connect to your router with an Ethernet cable?

    Please post back with your comments to the above and give more details about your configuration, i.e. router brand and model (or another material of Internet), if you connect wireless or with an Ethernet cable, etc. etc.


  • IPv4 and IPv6 connectivity says no Internet access

    My computer says that it has access to the internet but when I use a browser it does not work. Also Ipv4 and Ipv6 connectivity says no internet access, and at the launch of the troubleshooting, it indicates that the DNS server is not responding. So there are a lot of problems.


    Internet works with IPv4.

    I can't give a targeted response as you have not provided technical information on how you connect to the Internet and devices that are involveved.

    In general.

    Check the Device Manager for the entry of valid card of the wire.


    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.


    Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

    Turn off the computer and the router, reset the router and the computer.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    It still does not work, try this too.

    Firewall software.

    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall Windows Firewall should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example,
    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly, or uninstall it completely allowing the clean flow of traffic on the local network. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    Reset the network stacks .

    Type Cmd in the search text box.

    Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

    Type netsh winsock reset at the command prompt and press the Enter key.

    Do the same process to refresh the TCP/IP, just replace the command typed with.

    netsh int ip reset

    Restart the computer.

    Jack, MVP-Networking. WWW.EZLAN.NET

  • No Internet access - network/router wireless connection problem

    I can't connect to the internet after installing Windows 7 64 bit. I can see the router wireless/network from my computer, but it has sometimes limited connectivity or it says connected but no internet access. I used Windows diagnostic tools to try to fix it but it does not work, and my router connects without a doubt to the internet such that I now use on a portable computer that is on the same network. I would like to know if anyone else has this problem and if they fixed. I tried to change the physical address of the connection to the local network, but it didn't work, I guess because I connect via radio and no cable, and I heard similar stories on other forums that this can be a problem more common I suspect. Thanks in advance for your answer, and all the details you need I'll try my best to provide.

    OK I finally got to work, all we needed was for me to download the latest drivers (Realtek 8185 wireless card) off-site and install in compatibility mode, and then he worked all of a sudden. I hope this will help someone suffering from a similar problem!

  • No internet access code error; 0x800B010E

    Original title: Background: high, sourceengine, path; C:\windows\diagnostics\system\networking.

    an error of resolution _name, path_ C:\windows\diagnostics\system\ network; Troubleshooting the error details; source; engine, frame, high code error; 0x800B010E. no internet access. in data network localizable \en-Us will is iterated .ends with reset.bat on desktop, aims to repair the localized string data. still have no internet access. the computer worked fine when stopped. Restart, and then enter the problems. need for resolution, after three months, running under Windows 7 64-bit on ABIT mb w\ K8 3000 + AMD processor


    We need more information on the issue, you do face, kindly, answer these questions:

    1. don't you get the error message when you try to run the Microsoft Fix it?

    2. What is the brand and model of the PC?

    3. are you using a cable or a wireless Internet connection?

    4. are you aware of any material changes or software on the PC before this problem?

    See the article and follow the troubleshooting.

    Wireless and wired network problems

    Let us know the result. If you have any other questions, we will be happy to help you.

  • LAN/Ethernet and wireless: can connect to networks, but shows "no Internet access.

    My workplace has cable/Ethernet and Wi - Fi.  I'm working on a laptop, plug it into a dock where my ethernet cable is connected.  Lately, I've been the startup object and the network will connect automatically (by default to connect to the local network, not for the wireless) but I get the point of the triangle/yellow exclamation on my network icon and displays "no Internet access.  Even if I get this warning message /, in fact, I can access the internet, but I can't access resources online through a program installed (such as, to access to the / insertion of a photo online by word or update a SharePoint Outlook calendar).

    In the past, I could connect wirelessly and work around this problem.  However, now my wireless connection does the same thing: it will connect, it displays the warning "no access Internet, I can access the internet, but not another program."

    I ran the resolution of problems and it does not identify the problem.  I've updated drivers, disconnected and reconnected networks - nothing seems to work.  Any ideas?

    Given that you encounter this work to your work network you really need to get your business COMPUTER Department to come and watch. As far as we know, there may be certain restrictions checked in your network permissions that must not checked. There is so much that can happen it is impossible to diagnose on an online forum.

Maybe you are looking for

  • Enter the current password for HP Compaq Mini CQ10

    Hi, can you please help me with the problem of "enter the current password? cnu00554x8

  • HP Deskjet F2410: The printer does not print

    I have a problem with my printer after reformatting my PC. Product name: HP Deskjet F2410 not Operating system: Microsoft Windows 7 (64-bit) Drivers and software are already installed. I have the new black and color ink cartridges When I send command

  • Equium A200 - won't read DVD / CD more

    Hello any help would be appreciated... I'm not very technical so please keep things simple! Laptop: Equium A200-1VOModel: PSAF5EOS: Windows Vista Home Edition 32-bit My laptop won't play is no longer DVD or CDWork ok bootable CD but when I insert any

  • Satellite L650-116 - strange associate of HDD and fan

    HelloPlease be patient, read my topic (I am Polish and I don't know very English).I bought my laptop (L650-116) in September last in Poland. I had no problems yet. This is my first.When I work on a computer (I'm a student) I can hear strange sounds f

  • Re-install the partially used HP ink cartridges in printer

    Ask a question that I can't find an answer.I removed all the ink cartridges 4 of our printer HP Officejet Pro 8500 wireless last month because we bought a new printer.  There is still a significant amount of ink remaining in three cartridges, but the