No matter what file/program I open and work will appear later in the trash & Windows create a lot of restore points.

Original title: Windows XP: recycle bin and estore points.

After the last formatting the computer and installation of Windows XP:
(1) any file/program I opened and work with / appears later in the trash even if I did not remove it. The file or the program remains in its original folder and nothing happens to her, I can work with him when I want.
(2) Windows creates so many "restore points" that once a month I have to delete "all except the last" in order to have my program anti-virus (PC-Tools) are working properly.  Is there a cure for this?
Thanks in advance,
Yael

You did the right thing by turning SR off on your external drive.  See http://bertk.mvps.org/html/tips.html#11

There is no need to have the system restore check a partition which contains only data files.  Http://bertk.mvps.org/html/description.html (this is emphasis added)

About the system restore

  • System Restore monitors changes to the system and saves the State of the system as a restore point. If a system problem occurs following a change of system, the user can return the system to a previous state by using a restore point data.
    Applications and the system can create restore points when changes made to the system occur. System Restore also creates checkpoints every 24 hours of absolute time. In addition, users can create manual restore at all time points.
  • System Restore does not restore user data or documents, so it will not cause users to lose their files, email, browsing history or Favorites. System Restore is also provided to users in safe mode, making it easier for them to reclaim their computers before that happens the problems. Note: a system of Safe Mode or restore the command prompt a cancellation restore point will NOT created!

The monitoring system

  • System Restore monitors and restores a set of file system and application, the States of these files before the change of the archiving system. System Restore also records a snapshot of the registry (Note: some current registry values will persist) and some dynamic system files. When the System Restore detects that the user is not actively using the computer, (idle time) he compresses the registry and copies of any file made.
  • System Restore requires a minimum of 200 MB of free disk space on the system drive during the installation. When the amount of falls of free space on the disc below 50 MB on ANY monitored drive, System Restore goes into sleep mode and continues to create restore points. All restore points are deleted at that time. System Restore reactivates and resumes create restore points from 200 MB of free disk space on the system drive.
  • Files that are monitored or excluded from the monitoring are specified in the file % windir%\system32\restore\Filelist.xml. For more information, see Monitoring of file Extensions.

Tags: Windows

Similar Questions

  • What do I need open and run a WIN RAR file sent to me?

    WIN RAR

    What do I need open and run a WIN RAR file sent to me?

    A third-party compression program that can decompress this file.  Windows does not have any integrated other than "ZIP" compression algorithm

    WinRAR is not a Microsoft application.  You are welcome to buy it and install it, of course.

    You may be able to use the free 7-Zip to decompress the compressed files, that you received.

  • My programs are opening and closing slowly

    Member of the expensive Microsoft Answers Community:

    My programs are opening and closing slowly from last night. Do you know why this could happen and if 'yes', what can I do to solve it?

    Deepa

    Hello

    Troubleshoot using these methods and you can try a system restore which I wouldn't do unless
    nothing else has helped.

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ==========================================
    ==========================================

    Only if necessary and then you run back through the above (including the drivers once again) anyway.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • ENcypted file does not open and the key file is lost.

    Hello

    Does not open my encrypted file and the key is lost.  I did it in windows 7 and my system crashed.  I then restoed operating system, then my encrypted file does not open and the key file is on the same partition and also, he was gone.  It of a personal record and is very important and punch.  I tried to take possession of the file and that did not work I was wondering if there is a tool or method which can decrypt the file.  I know that their around the key file, or if there is a way to get the certificate... Please help.  Thank you for your help and answers.

    If your certificate and key are lost or damaged and you do not have a backup, you will not be able to use the files that you have encrypted.

    http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-lose-your-file-encryption-key
    "What to do if you lose your file encryption key.

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-an-encrypted-file-if-I-am-denied-access
    "How to open an encrypted file if I am seen refuse access?"

    Cordially,

  • PDF files would simply open and disappeared

    Our internet provider is Bell and their security system is now with McAfee. This morning I received a message from McAfee that a new update Adobe Reader must be installed. I did, but now I couldn't read any PDF file. PDF files would simply open and disappeared. I tried different configurations, but still not able to open PDF files. Help, please.

    Three things to try...

    1. Using Windows Explorer navigate to C:\Program Files (x 86) \Adobe\Reader 11.0\Reader, and then double-click Eula.exe and accept the license agreement
    2. You can open Adobe Reader by itself?  If so, try to disable the Protected Mode [Edit |] Preferences | (Improved) security].
    3. It might even be a malware problem; See http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html
  • Downloads are not open and asking to go in the trash. This is the message I get "is damaged and cannot be opened. You must move it to the trash. "What's happening?

    Downloads are not open and asking to go in the trash. This is the message I get "is damaged and cannot be opened. You must move it to the trash. "What's happening?

    Please set change the Gatekeeper

    Allow the applications downloaded from: Mac App Store and identified developers

  • What startup programs are essential and which can be disabled?

    How can I find out what startup programs are essential and those to disable?

    By reviewing what startup programs are running, they are specific to your PC and what programs you have installed, there is no universal answer

  • What is the difference in verses apps for each of the programs to purchase and download it?  They are the same thing and they are simply called "apps"?  Are the applications of complete programs?

    What is the difference in verses apps for each of the programs to purchase and download it?  They are the same thing and they are simply called "apps"?  Are the applications of complete programs?

    Yes.

    Adobe uses confusion of terminology in their efforts to explain things.

    Cloud desktop applications are the same as the purchase of the software on disk in the days avant-nuage. for example, the Photoshop Cloud desktop application is the full version of Photoshop CC 2015.

  • If I put a restriction of password which only allow customers who purchase print it (no copy or modification of the document) have an impact on the quality of the file when people open and read the file on mobile devices like phones and tablets?

    If I put a restriction of password that only allow users who buy to print it (no copies or the modification of the document allowed)-it will have no effect on the quality of the file when people open and read the file on mobile devices like phones and tablets?

    Some mobile devices won't be able to open it at all, but if it is open, the quality is not affected.  Please note and understand the warning you get when you set security: indeed, it is largely ignored by many apps.

  • Steps: we received the file in PDF format and has been invited to modify the form.

    Steps: we received the file in PDF format and has been invited to modify the form.


    My colleague edited in Livecycle es4.


    When we sent the document to them, they asked to have the title marked as H1, as it is currently labeled as content.


    In live cycle, unknowledgable about how we change it.


    We then took the file is saved as a word document in their exported to PDF via adobe DC


    my changes and referred.


    Once they have received the file they are unable to put anything (all data in the document where it will also prompt) using the player



    We are not writing this on the central computer, but that's what we have...



    Acrobat reader ix 11.0


    Adobe live cycle ss4 11.0



    Thank you...

    It is urgent need please reply as soon as possible

    Hi barbarac80529448,

    Please see this KB doc. helps LiveCycle | Working with the forms, it might help you in the installation of PDF form in Adobe LiveCycle.

    Kind regards

    Nicos

  • I installed the 12 elements, it does not open, a screen will appear with the options e-12 and 4 other languages

    I installed the 12 elements, it does not open, a screen will appear with the options e-12 and 4 other languages.  When I click on 12 items, a screen will appear with a red install icon, I click and it askes for the serial number. It won't let me type in letters digits only. Already, I have the serial number once. How to make this work? I don't want to be a programmer!

    attach a screenshot of what appears after clicking PES 12, http://forums.adobe.com/thread/963429

  • After the upgrade to Firefox 34.0.5, app opens but there is no indication in the browser window, i.e. no URL opens, and there is no message error, but Safari OSX 10.9.5 misfortune

    After the upgrade to Firefox 34.0.5, app opens but there is no indication in the browser window, i.e. no URL opens, and there is no error message.

    Safari (OSX 10.9.5) works.

    I tried the firewall solution, but it does not work.

    Previous version of Firefox work very well. I tried the version installation 34 twice and the computer restart.

    Yoono is a free software that allows you to connect and share with all your social networks and instant messaging in one place services
    www.Yoono.com

    It was very good work. Play well.
    Please mark your last post as solved so other will know.

  • So I recently found my game Age of Mythology. The disc is very good and works, but I have not the case with the number of products to this topic. What should I do?

    So I recently found my game Age of Mythology. The disc is very good and works, but I have not the case with the number of products to this topic. What should I do?

    Hi GuyT6,

    ·         What version of the operating system is installed on the computer?

    I suggest you contact the customer assistance form help and more information.

    How and when to contact Microsoft and support Customer Service

    http://support.Microsoft.com/kb/295539

  • Access to files and folders from 'My Computer' in the start window

    My computer is Windows XP SP3. I can't access my files and folders when I go to the start window and the work center. I don't know where start solve my problem. Can someone give me an idea of where to start to solve my problem? When I go to the start window and select my computer, it indicates that the request is "not responding".

    My computer is Windows XP SP3. I can't access my files and folders when I go to the start window and the work center. I don't know where start solve my problem. Can someone give me an idea of where to start to solve my problem? When I go to the start window and select my computer, it indicates that the request is "not responding".

    There are a number of issues that can cause the behavior of this type. The most common is malware. Please proceed with the instructions below. Please do not perform any other task than those prohibited here. It confuses only my attempts to help you.

    Click HERE. Download Malwarebytes. Update Malwarebytes and perform a full scan.  Choose to quarantine found nothing. Once completed click HERE and download Superantispyware Portable. Run a full scan quarantined found anything yet. Restart your computer in normal mode and perform a quick scan with Malwarebytes.

  • What mobile framework Oracle version and JDeveloper are needed to customize the Oracle EBS R12.2.2 and superior?

    What mobile framework Oracle version and JDeveloper are needed to customize the Oracle EBS R12.2.2 and superior?

    If you want to extend the pages of EBS, you need to use the OA framework for 12.2 version.  There is no native support for the extension of EBS by using ADF pages.

    If you want to build the ADF custom applications that integrate with EBS you can watch using the SDK of the EBS (see My Oracle Support) that offers a number of design patterns to allow you to do.

    With respect to the version of Fusion Middleware based on EBS 12.2, take a look at the notes 1911660.1.  11.1.1.6 is currently the base version supplied with 12.2.4 with the 11.1.1.7 version is the highest version supported.

Maybe you are looking for

  • F keyboard shortcuts keys does not?

    Hey! The F keys shortcuts (microphone mute, brightness, projector, etc) stopped working on my Lenovo Helix? He used to work at first, but after a few updates, they do not work, except for volume shortcuts. I changed the ctrl\fn button in the bios, so

  • I can't connect my QO55NA Hps PC to my sony walk via bluetooth.

    I can't associate my sony walkman Nw - ZX2 with my pc HP 23 QO55NA.  The number of matching on my walkman and PC game but when I press pair I get the message incorrect password key. Could someone help please?  WiFi is good thanks in advance.

  • What brand of tuner TV should I buy?

    MSI TV@nywhere Plus card TV Tuner FOR WINDOWS 7 I am from pakistan and I want to buy a new tuner tv card for windows 7, so please tell me the brand of tv tuner card

  • a remote administrator can have the rank to the owner, the administrator of the customers

    I am running Windos XP with service pack 3, I have a virus in my computer that no program antivirus can detect, my security log is remote administrator to register with the Local Service with four or five packages of Microsoft authinication, list onl

  • Open XML, how to write the path

    Hello I'm new to the Blackberry development and I hope you can help me with my problem. I try to work with an XML file, and so far, all that does very well as long I had the xml file, I work on, in the folder of my java application and deyployed usin