No matter what I do, my first mozzilla page is different from the one I choose, even if I change in the config file. What can I do?

Similar Questions

• Hey, so I just bought first 13 items and I downloaded the installation file and spoke to install, but it is stuck at 2%

  I just bought first 13 items and I downloaded the installation file and spoke to install, but it is stuck at 2% on installation.

  It then comes up with the error screen but I click on details, and he said: there is no Web page, I have restarted my computer, removed other Adobe products, I don't know what to do d:

  I tried lot D:

  He's going to tell me what IS the error that I have for it either... so I can check to fix D: said that there is no Web page...

  alexas

  Thanks for the reply.

  You just solved your problem. If not all, basically everything. You need 64-bit installation files for your 64-bit computer.

  You need two installation files - for extracting .exe and .7z the program itself. These two files have 64 in the name of the file if each is to be used in a 64-bit system.

  If you have purchased serial number...

  a. you can go after the series of 64-bit installation files where you are

  or

  b. downloading 64-bit from the following location and insert your serial number purchased by them during the installation.

  http://prodesigntools.com/Photoshop-elements-13-direct-download-links-premiere.html

  Important... carefully perform the ' Note: very important "on this web site in order to avoid the access denied Message. Don't forget: you are using the trip to Adobe mentioned must be authenticated, you use the web site for the 1 (.exe) file links and file 2 (7z).

  or

  Try download from c.

  http://www.Adobe.com/downloads/other-downloads.html

  Please let us know if your observation was the key to the solution.

  Thank you.

  RTA

• First elements 4 will accept all the MPG files

  I'm trying to re - edit some old DVD files in 4 first.

  It seemed to me that the only way to achieve this would be to convert the VOBs created originally with first Elements of MGPE2 files extension .mpg and then re - import. There may be a way easier than what would be better.

  However, in my method of some files, it first only converts 14 minutes of the video file and is important the minutes of rest (about 20) in black.

  This has happened on several files.

  I know that the video is there because I can play .mpg on many actors including Ms. It would seem that the first renouncing sometime.

  Can someone give me some advice please.

  This is in version 4, I think. It can be called DVD and HDD Camcorder. Something like that.

  However, as John says, you can also convert the VOBs. But if you do, you must convert to DV - AVI using a program like MPEG Streamclip, use the settings listed in our FAQ to the right of this forum.

  http://forums.Adobe.com/thread/415317?TSTART=0

• I plug in a device after I installed the drivers from the USB says windows can't recognized the device what should I do to solve it.

  I plug in a device after I installed the drivers from the USB says windows can't recognized the device what should I do to solve it.

  Hello

  I suggest to go to the link below and run the fix tool provided or follow the manual procedure provided to solve the problem.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  You can also check the below link for more information about advanced troubleshooting tips for General USB in Windows XP problems.

  http://support.Microsoft.com/kb/310575

• I INSTALLED A PROGRAM ON MY COMPUTER THAT ME GIVES A DIFFERENT FROM THAT ONE KEY TO THE BACK OF THE COMPUTER YHE. WHY? WHAT IS THE REAL KEY?

  I INSTALLED A PROGRAM ON MY COMPUTER THAT ME GIVES A DIFFERENT FROM THAT ONE KEY TO THE BACK OF THE COMPUTER YHE. WHY? WHAT IS THE REAL KEY?

  I HOPE FOR SUPPORT OF MY FRIEND FROM JAMAICA

  IT IS FASTER THAN USAIN BOLT AND MORE AMIABLE THA BOB MARLEY

  Thank you

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  (A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  (B) SLP COA: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• I lost some of the folders in the library.  They exist in the Explorer solutions, but somehow got removed from the library.  I can bring them back in but I'm afraid it will happen again in LR.  Please help me understand what happened and how can I prevent

  I lost some of the folders in the library.  They exist in the Explorer solutions, but somehow got removed from the library.  I can bring them back in but I'm afraid it will happen again in LR.  Please help me understand what happened and how can I prevent the recurrence. I use Win7.

  A few possibilities:

  1 > you click with the right button on the files and chose to remove them from Lightroom.

  2 > you have created a new catalog, and records that are not part of another catalog.

  Each of these scenarios seem like they could be a possibility?

• I used him copy / paste to add several checkboxes on my form, but now in preview mode when I check the first box it automatically checks all the boxes.  How can I stop this from happening?

  I used him copy / paste to add several checkboxes on my form, but now in preview mode when I check the first box it automatically checks all the boxes.  How can I stop this from happening?

  For later use, it happened because your fields have the same field name, and fields with the same name automatically have the same value.

  So all you had to do was so each had a unique name and it would have worked, but using the command create several fields is preferable because it renames the fields for rename you them.

• In first items 14 scene selection from the Menu movie (Motion, holiday, Christmas frame) does not bind the scene 6 main Menu page. It places the scene 6 2 Menu scenes, but unrelated to the other, the main or scene selection Menu. What it

  How can I edit a movie Menu template? I use a Motion - celebrations and events - model of menu for Christmas related to 6 scene markers. Five scenes are represented by a thumbnail and name on 1 Menu scenes that appears when the button on the main menu page scene selection is reached. However, the scene 6, which has also a sticker and marker corresponding scene, is on another page (Menu 2 scenes) that does not link to the home page (does not appear in the scene selection Menu that has just 5 thumbnails and an arrow to return to the main Menu). In the area of work under the clip monitor Main Menu 1, Menu 1 and Menu 2 of scene scene appear together and by clicking on the thumbnail in the scene 2 menu the link to the clip 6 works except when Preview Disc is played, in which case the Menu 2 scene disappears. The scene marker is correctly linked, it just does not appear in the menus of the finish. The first five items of the Assembly (related to the scene selection menu) are all the video clips, but the 6th clip is a slide show. I read several threads on menus but found no mention that a slide show scene marker is treated differently by a menu template. Is it? The 5 first clips are all in the format AVI - DV with imported project files previously saved in this format, so that they could be related and engraved on a DVD. The slideshow is imported from PSE14 and 6 attached clips have already been burned successfully on disk (without menu) as a try-out. However, I was not satisfied with the resolution, then saved individually at the only other resolution DVD - SD576. Now I'm stuck at getting this sort menu. I operate 10 WIN. Any help will be accepted with gratitude.

  Hi, thanks for your response. I can rephrase the question very easily: why I've been so stupid? My problem was that I couldn't see a link in the menu between the Menu scenes 2 template and the main Menu. It turns out that the link was there all the time (a sideway arrow just above the main Menu link) but I thought he was part of the link from the main Menu and never clicked on it. When I burned my project to a disc and played on television, the sideway arrow was a different color and, of course, another link... the link I was looking for. Then, my apologies, problem solved, lesson learned - click on everything you see. Thank you. And I was very happy since the upgrade to 14 before except when it makes me feel stupid, which is frequently.

• 3 related issues: slow movement; the photos are all from the first image; and no sound from the soundtrack to the DVD downloaded.

  I put a DVD in my computer. It plays fine in Windows Media Player. When I transfer to Windows Movie Maker Live, three things happen: 1) the thumbnails are all the same - the first image. (2) the movement is slow. I tried it accelerates, but it is simply not the movement in real time - either too slow or too fast. (3) the soundtrack plays for a fraction of a second.

  What is the problem and how to fix it?

  I converted DVD to WMV format. This fixes the movement of the image and I can hear the music (not quite synchronized), however the thumbnails are still just the first image. In addition, every single feature that I blow (editing, effects, forwards, etc.) the picture freezes and yet the soundtrack plays again.

  ===================================
  It is normal that video to be the first image thumbs.

  Since it was a DVD... I guess it's a big project
  and the gel could be due to a lack of system resources.
  If you wait it can dissipate.

  Some video converters are better than others... Freemake
  maybe worth a try.

  It is also possible that your video driver may need an update.

  Verify that the video driver is problematic is to
  reduce the graphics hardware acceleration:

  Windows 7 - reduce graphics acceleration
  (see following article)

  More low hardware acceleration
  http://help.AOL.com/help/microsites/microsite.do?cmd=displayKC&docType=kc&externalId=15391
  (Windows 7 / Vista / XP / 98 / ME / 2000)

  Good luck...

• First Elements 11. Cannot open the project (file PREL) in point 8.1 of Windows.

  I created the project (file PREL) in the first 11 elements in the Windows 7 Professional environment. I was able to open it without problem.

  Now I have Windows 8.1. When I try to open this project, I have a saying "this file type is not supported, or the required codec is not installed."

  Help!

  Levalt

  Thanks for the reply.

  When you import media source in a first Elements (any version), you are not importing real media. What you have in the media of the project are copies of the originals which are stored in the designated place hard drive. But the project needs to trace these originals to the save location as they were when they were imported in the project. If you move the source media, delete rename them or even that they are in the folder, you will encounter some bad media reconnect issues. At this point, the message "Where is the file...?" that you get when you try to reopen the saved closed project will be a major asset by her reconnects. Alternatively, you can use the function replace images for her reconnects.

  The following links go to the above factors...

  http://help.Adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7d cb.html

  http://www.atr935.blogspot.com/2013/04/pe11-replace-footage.html

  Troubleshoot damaged projects | Adobe Premiere Elements

  Do not hesitate to ask if you have additional questions on this or need for clarification on what written.

  Best wishes.

  RTA

• What is the use of FPGAS and how it differs from the IO Modules

  Hi all

  Maybe it's a silly question for most of you.  But I have very less knowledge about the basic concepts of electronic (FPGA, real-time) to cRIOs. I know that FPGA

  can be used to generate circuits within the chip that helps by some logical functions.

  I've just started working in the cRIO.  My question is that we have Modules e/s making it outputs all the application entry.  So, what is the purpose of e/s in the FPGA.

  Lets consider that we entered for an application of RTD.  In this case the module NI 9217 itself exits 24 bits of data from the RTD measurement which may be the process of the LabVIEW VI.  What will be this FPGA between the i/o Modules and the processor will help in?  Also I want to know what type of communication is used to send data between the FPGA and host modules.

  Thanks in advance

  Ajay HI:

  Sorry, you do not have an answer to your original question. However, you are right about the benefits of the FPGA. You said, if you build pre-processing in the FPGA, you can unload a lot of potentially CPU calculations out of the host processor. In addition, the program running on the FPGA is highly deterministic and can run the code very quickly. So if you build a kind of guard or evanescent dog part of your application, the FPGA is a good place to put it.

  To answer your other questions, communication between the modules and the FPGA is generally above the SPI and the data can be transferred between the FPGA and host via DMA FIFO operating on the PCI bus or single point save access using read/write in the FPGA host Interface controls. You can also use interruptions in signal of disputes between the FPGA host.

  I hope this helps, but let us know if you have any other questions.

• I can't delete my temporary files from the drive clean, I can't defragment all the c drive, what is my problem

  When I defragment it says that some files can not be defragmented, it said that it defragmate can't all drive c, when I do a disk clean up it only cleans and removes temporary internet files, empties the Recycle bin and compress old files. It dosnt take off web pages offline 9 k or 3 temporary files, 696 KB, or 32 KB of the temp of client/web publisher files.

  He used to do that before but not now and my computing needs a drive clean and defragment all the time more often when im doing something on my computer, it really goes slugish and plays and I have to close and clean the disk and defrag all too but its all just do not do the job.it has just started to do this what I can do to solve the problem.

  Thank you

  Margaret Cox.

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  This will ensure that your system is clean.

  What is your OS and service pack, current antivirus, make and model of the pc?

  Once the scans have been executed and the system is clean, we can optimize your pc:

  Stanley Zhang tips

   

  Will probably want to clean this machine...

   

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  ·                                 MalwareBytes (FREE)

  ·                                 SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

• First Pro CC impossible to extract the downloaded files U44M1I210

  I took my first Pro CS6 computer and have been unable to get the CC version to work continuously receiver of the message:

  Impossible to extract the downloaded files.  Try to press to redownload again. (U44M1I210).

  Try http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

• First Pro CC will not import the .mov files

  Problems with first Pro CC, I can't import. MOV files created with my Canon 6 d.

  If I try to import the files, I get a msg of error "File not supported" very generic.

  It is a new installation of first CC on a new computer. I was able to import them using first Pro CC on the old computer.

  QuickTime will play well these files on my new computer.

  Premiere Pro CS6 will import these files to the new computer.

  First Pro CC would open them well on my old computer.

  I don't know yet where to start. Any help would be appreciated.

  Here are my system details:

  • 10.9.3 OSX
  • new Mac Pro
  • 3 GHz 8-Core Xeon E5
  • 64 GB OF RAM
  • The files are on the G external drive - Tech Thunderbolt.

  Well, I uninstalled and reinstalled first CC and all works well. No idea what went wrong, but its working now.

• What is Google chrome? Do you recommend installing? Is this different from the ordinary Google?

  I have problems with the retailer's Web site. They recommend using Google Chrome. I don't know what it is. Please answer.

  Closing Firefox. After a few moments to leave FF to close, press and hold the
  < Shift > key and start Firefox. If the problem disappears, he tells us
  something. If this is not the case, he told us something else. No harm will come to
  your system by doing this.