No matter which usb port I use for a usb hub

Similar Questions

• Which TCP port is used for VMWare Infrastructure Client?

  Hello, my ESXi server sits on the private network, and I'm trying to PAT so that I can access the external network using VMWare Infrastructure Client Server. Does anyone know what port is VMWare Infrastructure Client listen? Thank you.

  Priscilla

  Do the external network for VMware NAT

  I guess you mean that your server is located in the internal network and Client is on the outside.

  If the customer does not have to "listen" for connections it opens TCP ports - HI 1024-65535 to servers as follows.

  Servers (including GSX) TCP ports: 8222, 8333, 902

  If you have ESX (i) then TCP ports: 80, 443, 902

  T:OMI

  Psalm Points, please

• Under which community should I use for apple store questions?

  Under which community should I use for apple store questions?

  I need to get my Bill for a 5s iphone that is more than 18 months.

• Qosmio G40 - which driver can be used for remote control?

  Hello

  Which driver should I use for remote control?

  How to configure with the PC?

  Thank you very much.

  I assume that you need remote control manager.
  This tool is preinstalled on your Qosmio laptop?

• How will I know which encryption scheme is used for a partially encrypted connection?

  When you access a site that contains unencrypted items, technical details by just looking at says "Connection partially encrypted". Although it is useful to identify it, is what I would really like to know which encryption scheme is actually used for the encrypted page elements. Is there a way to do it, and, otherwise, it would be something that could be considered as a feature?

  The images show joined the difference in the information available for encrypted partially connections.

  It will be possible to inspect this information via the "network monitor" in the development tools of firefox in a next version of the browser (on firefox dev edition which is already implemented).

• Where can I find which Intel chipset is used for my Precision T3500?

  I have upgraded to Windows 10, only now to find that the T3500 is "untested for Windows 10."

  Technology Intel Rapid store takes up 30% of my CPU quad.

  Downloads of Intel RST all depending on which Intel chipset or on the motherboard. Speccy tells me that the chipset is Intel X 58, rev. 22. which does not match all chipsets listed regarding RST downloads.

  The Intel Chipset ID utility is not for 64-bit, so I can't use it.

  If it's important, the Southbridge is Intel 82801IR (ICH10R)

  Short to open the case and read the chip ID, how do I find what chipset I have?

  9.6 does not have a floppy disk.  F6 floppy installation is reserved for the pre install formatting.  Once the OS is installed all you need is the big race executable as an administrator.

  
  File name: STOR_allOS_9.6.0.1014_PV.exe

  9.6.0.1014

  https://Downloadcenter.Intel.com/download/15251

  10.1.0.1008 is the version of transition.

  https://Downloadcenter.Intel.com/download/20104

• which version of fiefox use for mac 10.1.5? AND WHERE CAN I FIND THE DOWNLOAD LINK APPROPRIATE PLEASE AND THANK YOU... DAVE

  I REALLY NEED A BROWSER OF DESCENT FOR MY OLDER IMAC WITH LIMITED HARD DRIVE SPACE. CAN SOMEONE HELP ME AS MY BROWSER (1.7.13) NETSCAPE STARTS TO MESS UP A LITTLE BIT. Thank you!!

  Firefox 1.0.8 was the latest version of Firefox for versions of Mac OS x 10.1. It is not supported by Mozilla since April 2006.

  FTP://FTP.Mozilla.org/pub/mozilla.org/Firefox/releases/1.0.8/Mac/en-us/

  You should also watch Classilla.
  
  http://www.floodgap.com/software/classilla/
  
  Looks like is still maintained.
  
  http://code.Google.com/p/classilla/wiki/Roadmap

• Is there a function in LabVIEW that takes the last half of the data (table) which can then be used for the analysis?

  I was wondering if there was something in this direction in LabVIEW to create a shortcut for this, rather than try to hardcode it after the fact. Does anyone know this method I'm talking about? (IEC 60601-2-24 dry 50) Please let me know because I'm fighting here.

  Mark.Eckhoff wrote:

  I have to calculate the index and the length after the fact. I just hope that there may be a simpler solution.

  Well, you can reduce the complexity of the half by computing only the "index" and leave the 'length' of "subset of the table" unwired. If you wire length, the subset is the rest of the table.

  There are also "split table 1 d.

  If it's still too hard, do it once and wrap it in a sub - VI, called for example "SecondHalf1D.VI". Of course, you probably also need a logical deal with cases where the size of the array is not an even number.

• No matter WHICH instance of R12 NOTES for UPGRADE to R12.2

  Hello

  All metalink notes are available from upgradation of R12 instance on to R12.2 R12.1.

  Thank you

  Guz

  1974784 wrote:

  Hello

  All metalink notes are available from upgradation of R12 instance on to R12.2 R12.1.

  Thank you

  Guz

  Oracle E-Business Suite Guide upgrade version version 12.0 and 12.1 to 12.2

  http://docs.Oracle.com/CD/V39571_01/current/Acrobat/122upg12.PDF

  Oracle E-Business Suite version 12.2: upgrade of sizing and best practices (Doc ID 1597531.1)

  Guidelines for preparation of database for a E-Business Suite 12.2 version upgrade (Doc ID 1349240.1)

  Center of Information Oracle E-Business Suite Release 12.2 - Upgrading (Doc ID 1583158.1)

  Oracle E-Business Suite Release Notes, version 12.2 (Doc ID 1320300.1)

  Thank you

  Hussein

• USB to serial port, Com port to use.

  I have Windows 7 64 bit Ultimate, evga 58 MB Intel i7 950 3.06 GHz, 6 GB ram, many locations for usb. I have a weather station "Oregon Scientific WMR968, I plugged my XP PC via a"usb to serial"cable, it worked well, giving me a com port to use for the software, but it does not work with Windows 7. It installs an input usb device, under the label HID, but not a COM port I have tried many drivers, but she finished in the same way, "peripheral usb entry" NOT a COM port I have tried to install .inf and who does not work either. I tried to update driver, and then point to the .inf and still no good. How to do this job, please. ?
  Frustrated,
  Robert

  Hi Androman,

  First of all I suggest you to check if the Oregon Scientific WMR968 is compatible with windows 7 or not.

  Check out the link given below to the windows Compatibility Center 7.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  If it is not compatible with Windows 7, then install the drivers in XP sp2 compatibility mode and also to contact the manufacturer for drivers that are updated that are compatible with windows 7.

  Select the option for windows XP sp2 and install the drivers.

  For more information, visit the link given below:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• What are TCP IP ports are used by CRIO

  MIO

  Which ports or a range of ports are used for the cRIO by OR for:

  LabVIEW development system

  OR MAX

  RAD tool

  Network browser OR

  Manager of distributed system of NOR

  Configure us the firewall settings and VPN connections and understanding these elements is very important to us.

  Thanks in advance.

  There are a few posts about this already on the forums - you might find them useful:

  http://forums.NI.com/T5/real-time-measurement-and/exactly-what-ports-are-used-to-communicate-with-a-...

  https://forums.NI.com/T5/real-time-measurement-and/cannot-access-cRIO-behind-NAT-firewall-with-Max/t...

  I believe that UDP (beforehand) and TCP (for communications) is used by MAX.

  You might also consider using a tool like Wireshark network sniffer to see what links are used.

• VADP using NBD: network on an ESX Server port is used to transfer data?

  I went through a bunch of VMware documentation (including the API guide) and can't seem to find that this documented anywhere.

  I have an environment where we bringing ports 10 GbE online on a couple of ESX servers and want to make sure that traffic VADP uses this port. This will be a dedicated dish network so I guess that ESX will be smart enough to resolve the proxy host (it is with NetBackup 7.1 with VMware host access), to see which network its on and send the traffic through the appropriate interface.

  If you have several defined VMkernel ports (for example, a dedicated for vMotion and the other on a VLAN separate or link dedicated 10GbE for NFS data warehouses or dedicated to the traffic of mangement), what is the logic to decide which VMkernel port to use?

  I know with ESXi, it changes a little because it is no longer a service console port and when configuring a new network port you have only the types of connections for the Virtual Machine (VM group of port) or VMkernel. But when you add a VMkernel port, you can specifically select the port properties to include: vMotion, logging of fault tolerance and traffic management. I guess the question is: do any of these port properties MUST be selected in order for the traffic of the NFC to use port, or it will use all VMkernel Port... and if so, what VMkernel port (hopefully it will be smart enough to try to use one on the same subnet, if it exists). And if the properties are selected (vMotion, logging of fault tolerance or management traffic), this would specifically EXCLUDE these interfaces for traffic of NBD (NFC)?

  Any help or pointers to where this is documented would be great.

  Thank you.

  Hard enough. Really don't know where this is documented on the VMware Web site, but could find a document that will tell you what you have already imagined: http://www.symantec.com/connect/blogs/nuts-and-bolts-netbackup-vmware-transport-methods-and-tcp-ports

  Then... 902 TCP/UDP is required to transfer files using NFC. This port will be enabled only on the VMkernel interfaces where you have management traffic. You will need to plan your network, separate network segments in order to run your backup in the best conditions.

  And, I agree with you that it should be documented somewhere and there should be some "checkbox" to select the interfaces used to transfer files.

• Which driver should be used to connect HP 34401 using RS 232

  Hello

  I'm using labview for the first time. I want to use the RS 232 cable to connect between Labview and HP 34401 multimeter. Which driver should be used for this purpose? Help, please.

  Thanks in advance!

  A search for the HP 34401A on the Instrument Driver Network reveals this page, which should have what you need. If you're using LabVIEW, you will want one of the first two projects.
  
  
  Also, for future reference, this board is for NI DMMs. For future instrument driver assistance, you will receive more timely and expert information on NI's Instrument Control forum.
  
  
  Please let us know if you require any further assistance.
  
  
  Thank you,
  
  
  Tobias
  Software Engineer
  Precision DC/Modular Instruments
  National Instruments
  

• Should what version of SyncToy 2.1 I use for the XP 32 bit system?

  SyncToy 2.1 site has 2 exe files.  Which one should I use for a 32 - bit XP system?

  The second x 86 hope I could help

• What version of Photoshop is best used for this laptop?

  Good afternoon. Please tell me what version of Photoshop which is better to use for this laptop: HP Notebook 11-d055ur flow (Intel Celeron N2840 2.16 Ghz / 11.6 "/ 1366 x 768 / 2 GB / 32 GB / Intel HD Graphics / WiFi / Bluetooth / 3G / Win8.1")

  Thank you.

  [Title edited for clarity and moved to the General Discussion of Photoshop - Mod]

  Adobe publishes a list of the minimum requirements for each version.  Configuration of Photoshop  CS6 - CC 2015.5

  But you want to look at the specifications of the optimal system for the work you want to do:

  https://www.pugetsystems.com/recommended/recommended-systems-for-Adobe-Photoshop-139/HARDW recommendations are