No message control there system nao estou vendo com nome of este sistema como

mandaram clicar em iniciar > message control > system sistema > boas vindas. So that no message não vejo escrito system sistema

Windows 7 utimet

These forums are in English only.  Portuguese Windows forums are here:
http://answers.Microsoft.com/pt-BR/Windows

Tags: Windows

Similar Questions

  • Control Panel System Windows Explorer has stopped working

    When I press on the Control Panel, system, I get an error "Windows Explorer has stopped working" and then control panel stops. I get this error every time I have to perform this action. When I run my PC on Safe Mode, it works fine and I get no error and I'm able to run the options that appear when the 'Systems' option is selected. Other tasks in the control panel seem to work correctly.  I also noticed that I get similar messages "windows Explorer or the program has stopped working" periodically when I perform other tasks in internet explore, etc.

    I tried all the recommendations described in of KB/269949 and KB/929135 knowledge articles and many items in the Microsoft community, Microsoft and the Internet site. For example, update the video driver, auditor of file system (CFS), Virus scan, Mode safe, clean boot, memory RAM test, etc.. I also tried all the relevant actions I could think under the Microsoft Fix tool. Each of them has not solved the problem.

    I have a laptop Acer Aspire 5742 G with ATI Mobility Radeon HD 5470 with 8 GB of memory, running Windows 7 with all the latest updates installed, so all drivers have been updated. I also use the last IE 11 with all updates.

    If anyone knows a similar problem with Windows 7, Windows Explorer and Internet Explorer 11, or has a recommendation how to fix?

    Hi Ravi,

    This is an update to my problem. It might be useful to others with similar problems.

    My problem has not been resolved, but I decided to live with it. It was a difficult decision after a major disaster, I almost lost everything on my PC to try and solve the problem.

    I put the finger on the problem with the graphics ATI Mobility Radeon HD 5470 version 8.741.1.5000 dated dated 25/08/2010 driver. I noticed that when I check for an update using Control Panel, Device Manager, select the graphics card above and updates, windows comes back with a message indicating that it is the best available driver.

    I made the mistake to check the AMD website to see if there is a newer driver. According to their instructions and download their program, they recommended a more recent drive using the catalyst for AMD. The new driver is Version 14.301.1001.0 dated 15/09/2014 date. The same driver is also selected if I the Slimdrivers application user. With this new driver, the problem disappeared. In other words, I was able to use the Control Panel, System menu and access the submenus system without any problems. I thought I had solved the problem. I repeated the process and checked for the driver from the Windows Control Panel, Device Manager and look for the updates. Surprise. This review of windows update back to the original version of the 25/08/2010. The problem is back again. I repeated this process with re-installing Catalyst from AMD with the same results.

    However, I noticed that the AMD Catalyst, never finished the installation and the installation crashed. Updated the driver before it crashed.

    My major problem occurred when I tried to restart the PC with the new driver installed by AMD Catalyst. My PC and Windows would not start. He gave me a number of errors that the problem cannot be corrected. I tried all the solutions, Safe Mode, point to restore, System Restore and all the choices given in the articles from Microsoft. None of them worked.

    Finally, after many hours, days and nights that I was able to use an Acer recovery disk, I created when I bought the laptop. One on the Image worked system recovery options and I could get my PC to a more ancient date. The driver is the original edition of 2010 the year with the same problem.

    Therefore, I decided to live with the problem. I can access the submenus of system using startup and entering in the auxiliary system option in the search box. I wrote these submenus.

    WARNING TO OTHER USERS. DO NOT TRY to UPDATE THE ATI Mobility Radeon HD 5470, 8.741.1.5000 driver version dated 25/08/2010, using catalyst of MCDA.

    Furthermore, my assessment is that if I try to restore my PC to the factory default condition, once all windows updates are installed and I install my apps, the same problem will occur. If I did think I would lose a lot of useful applications, which I'm not sure that I can restore. I have a lot of useful data that I use for more than 20 years and I can't afford to lose their jobs. I would live with the problem until something more grand occurs. In this case, I would by a new laptop. I would make sure that there no AMD ATI products on this topic.

    Thanks again for the time. There is no reason to answer, unless as described above, you have seen something new.

  • Como reparar produto (microsoft word startup) no message control

    Microsoft word of estou tendo problemas com o. O programa não abre, e a resposta than e recebo "nao e possible open, novo tent or fix o programa no message control. EU gostaria Sabre, passo a passo como reparar o programa microsoft do word no message control.

    Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

    Por favor, selecione o idioma na lista suspensa acima para enviar sua question no language of his choice. O forum go e voce para Inglés only. SE você não o idioma desejado acima, suporte para may find other localidades Affairs pode ser encontrada through link abaixo:

  • On Yosemite 10.10.3, I often get the message that your system is short of memory application. Activity Watch monitor is because of "AppEH" who eats little bit all memory

    On Yosemite 10.10.3, I often get the message that your system is short of memory application. Activity Watch monitor is because of "AppEH" who eats little bit all memory

    Please see the options below to determine which method is the best to face the Adware installed on your computer.

    Easy, safe, and effective method: https://www.malwarebytes.org/antimalware/mac/

    If you are comfortable doing removals of text books of records, use the Apple support document below.

    http://support.Apple.com/en-us/HT203987

    In addition, read the articles below to better understand why it has happened and be better prepared for the next time there is a problem on your computer. https://discussions.Apple.com/docs/doc-7471

    https://discussions.Apple.com/docs/doc-8071

    http://www.thesafemac.com/tech-support-scam-pop-ups/

  • Can I use third party Windows CE based touch panel to control my system?

    I want to use a touchscreen to WindowsCE based to control my system by connecting a CompactDAQ by USB and install the.exe file built from LabVIEW and CompactDAQ driver installation.

    It seems doable, but I don't know if Windows CE supports .exe files and hardware drivers, or if there is something I can do to it support them. I hope someone has an idea about this and can help me.

    Thank you

    Hey MrWho,.

    That's right, assuming that you are referring to these models:

    http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/206844

    They are running windows XP and be functionally identical to DAQmx running on your computer. One thing to consider is that if you have made custom to your material names, you will need transfer these names of courses for the application to work as expected. This document and related links, can be useful in that: http://digital.ni.com/public.nsf/allkb/C6F419C54D36FDC38625706D004C2BD5?OpenDocument

    You can also do this programmatically by using the API system configuration: http://joule.ni.com/nidu/cds/view/p/id/2328/lang/en

    Thank you

  • HP b110 printer range, try to print I got the following message: "failure ink system - error 0xc19a0003.

    I bought a HP b110 printer 1 year and there are 8 days, so is no longer under warranty. Yesterday, when trying to print, I got the following message: "failure ink system - error 0xc19a0003. I have renewed all the ink cartridges (I only use original HP) to nothing does not...

    Any ideas would be appreciated.

    Thank you.

    Hello

    As OEM HP is responsible for the good operation of the printer and their
    drivers provided. Check with HP support, their documentation online and
    drivers and ask in their forums.

    Good luck, you need to update or reinstall the latest driver.

    HP support/troubleshooting & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    =============================================

    The main issue is probably the drivers, but these can help:

    Add or remove a printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Open the printer Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Find the manufacturer's Web site
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

    Find and install printer drivers in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • When I try to set up "Remote support" I get the error message: "your current system settings prevent you from sending an invitation. How can I solve this problem?

    Using Windows XP Profwssional.

    (1) when I try to set up "Remote support" I get the error message: "your current system settings prevent you from sending an invitation. How can I solve this problem?

    (2) can I use this feature when both computers are on the same network?

    Hello

    (1) you must configure your computer to use the remote control - see here:

    http://www.winxptutor.com/raenable.htm

    and don't forget to make the firewall exceptions

    (2) this function works on the different network also (so a computer can be in the United States and one in Australia)

    Note - a computer can have Windows XP (family or professional edition) and another may have Windows 7, Vista.

    LC

  • Computer change is saved to: in Control Panel, system, general

    Want to sell computers, but don't know how to change "computer registered to...» "in Control Panel, system, general.  Is there a way to change it without having to reinstall Windows XP?

    Thank you very much for your answer.  Who did the trick!

  • Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

    Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

    I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

    Thank you

    Hello

    Please join Microsoft Community where you can find the necessary information on Microsoft products!

    You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

    The problem may occur if some of the components of the update are corrupt.

    What is the full error message that you receive?

    I suggest you follow the steps mentioned below to check if the problem is with the update components:

    Method 1: Reset the update components

    See the site:

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Method 2: Run the system update readiness tool

     

    See the site:

    System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

    http://support.Microsoft.com/kb/947821

    Method 3: Turn off the antivirus software

     

    See the site:

    Disable the anti-virus software

    http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    I hope this helps. If the problem persists, let know us and we would be happy to help you.

  • I have an error message of "there is no browseui.dll. Installation of the file may correct the problem. »

    I have an error message of "there is no browseui.dll. Installation of the file may correct the problem. "I have no office and nothing showing where would the office.  Help, please! I ran a spyware/malware pogrom, but no help.  I tried the "command Prompt" and %windir%\system32 using the cd but did not work.  I also used a DLL problem progrm difficulty but no help.  I'm running Vista SP2 and have no taskbar, no start menu and nothing shows up on the desktop.  I can get on the internet, but in a roundabout way.  I tried several solution on the Microsoft web site, but no help. I did a restore but no help.  I don't want to lose all my photos and documents HTML if possible.

    Hello
    Thanks for your reply but I had tried the System File Checker with no luck.  Finally, I replaced the hard drive, because after several attempts, I reached a point where I had the format of hard drive, but the main area where all my data were not could be formatted. I think a virus may have lock me up.
    To date, May 22, 2012 the system works with the new hard drive.

    Thanks to everyone who gave suggestions.

  • I have two HP printers and all often, I get a message that there is no printer

    Original title: from time to time, I get a message that there is no installed printer. I have two printers. I have to turn off everthing and restart the computer. Printers appear in the control panel

    Printers are both HP

    C7280

    F4180

    Hi June, Col.

    1. When did you start to question?

    2. you remember to make changes to the computer recently?

    Method 1:

    Try the Fixit printer mentioned in the link below and check out them.

    Solve printer problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Also try to uninstall the printer and try to install one at a time and check.

    You can uninstall all the printer drivers, programs and features as well as Device Manager.

    Method 2:

    Step 1:

    Uninstall the drivers from programs and features.

    a. Click Start.

    b. type appwiz.cpl in search, and then press ENTER.

    c. find the printer driver packages, right click and uninstall both packages.

    Step 2:

    Then uninstall the printer since also Device Manager drivers.

    a. click on start

    b. type devmgmt.msc in search

    NOTE: Click on view the hidden devices on the view menu in device managers before you can see devices that are not connected to the computer.

    c. you find devices to printers, right-click on it and select the option uninstall

    After the uninstall, try to install one printer and check if it works. If it works, then try it with the other and check.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • When I turn on my HP laptop, I get the message "No operating system". What can I do?

    My brother bought a HP Pavilion DV6 laptop, but when he turned on the first time the message "No Operating System" is displayed and nothing else happened.  Unfortunately he died on 8 April and I inherited this laptop.  Can I get the disc replacement with the operating system on them.  I have the product key of the system disks that were supposed to have been installed when he bought it.  Please notify.

    My brother bought a HP Pavilion DV6 laptop, but when he turned on the first time the message "No Operating System" is displayed and nothing else happened.  Unfortunately he died on 8 April and I inherited this laptop.  Can I get the disc replacement with the operating system on them.  I have the product key of the system disks that were supposed to have been installed when he bought it.  Please notify.

    See the other answer (s) you got but also note the following: the first thing to do is to ensure that there is no CD or DVD in the drive. If it and try to boot from it, you would probably get such a message.
    If there is not, there is a good chance that the hard drive is dead and must be replaced.
  • NAO estou access download o adobe creative had cloud o programa false, agora I bought a licença, I can not desistalar o false nem download o pago, o devo fazer

    NAO estou access download o adobe creative had cloud o programa false, agora I bought a licença, I can not desistalar o false nem download o pago, o devo fazer

    Hello

    I guess that you receive an error for the trial creative cloud.

    You can download the installer for Creative Cloud from here:
    Creative cloud help | Creative cloud desktop.

    For the error of the trial;

    First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.

    https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

    Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:

    https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  • Records show new messages, but there is no new messages in the folder

    I have used filters to set up the folder called application, which I used for several months now, all of a sudden I have a problem with one of this file see the new messages, but there is no new messages in the folder. I checked with my email providers email based web browsers to see if new emails have came that should go into the folder named application and none has to go into the folder of file titled application. Any ideas on what is causing this problem and how to fix it?

    Good. You can then mark the thread as "Solved" Please?
    Thank you.

  • When I send a message to blueyonder system says the message was sent, but the recipient can't find it in emails or on the server.

    I create a message and press send. The system indicates that it connection, then the message has been sent. When the recipient checks the message on its system and/or the server, it can not find the message. I sent him direct messages from my server and Outlook Express and it does not get them only when you use Thunderbird messages go missing. I have to use special settings to send messages to Blueyonder?

    I suggest that contact your email provider. Similar problems have been reported of users blank.

    http://community.virginmedia.com/T5/other-queries/emails-to-blueyonder-users-not-being-received/TD-p/1813248

Maybe you are looking for

  • Cannot focus Skype name and password in the login screen

    I use Skype for a long time now and used the automatic connection whenever I start my computer. Today, I accidentally disconnected from Skype. Now, I can focus my Skype name and password in the login screen. I'm having the same problem with fields in

  • Update configuration 3 of 3 loop

    Configuration of update: stage 3 of 3% full. Do not turn off your computer.  Can't get out of this loop. Tried all that the security modes, but they come back to the loop. Tried to fix your computer, also without help. Didn't back up the disk to rest

  • Customization of Avast?

    I was wondering if I could stop both services on Avast. As: Internet Mail - I use Yahoo and Netzero. I do not use outlook. Outlook/Exchange-I don't use outlook. Reason? Process less.

  • Setup could not initialize

    I try to install on my mac cs6 and that's all that I get this message. Not too good with computers can someone explain what I need to do?

  • Software Adobe Acrobat reader does not always convert the my docs - why not?

    Lately, when I need to convert my documents to word, excel, etc. I am unable to complete the task. Adobe simply did not finish the task. My subscription is up to date and it wastes a lot of time. Quick solutions or solutions?Sincerely,Andrea