no monitor after installing graphics card

Similar Questions

• HP compaq dc 7900 SFF: no sound after install graphics card

  I have hp compaq dc 7900 Mini PC... After you install the graphics card ati hd 5460 there is no sound in my pc... instead of on-board "audio device high definition AMD there." I use some youtube vedios to solve this problem and there is a solution by allow edge audio in the bios Setup... then I try to enter the installation using F10 but it ask password... then I hit "enter" 3 times and I could not able to enter the bios Setup... in audio device shipped here turn off but I can not change it... I could not change any setting in the Configuration of the bios... so please help me solve this problem.

  

  

  You are the very welcome.

  There are two ways you can solve the problem.

  1. remove the rider of green password on the motherboard, following the instructions in the manual that I posted.

  And as I wrote yesterday, if remove the jumper and turn on the PC does not erase the password, then the only other thing you can do is to replace the motherboard by one with no BIOS password set.

  2. install a video card that has no hdmi on the port.  I put a Radeon HD 2400 in my dc7900 SFF.

  This card has only one S-video and DVI port, so the onboard sound is not disabled when you install a card like this.

  Then you can press the yellow button to reset CMOS to restore the integrated audio system.

• No sound after installing graphics card

  I just installed a sapphire ATI 3850 1gig video card and now I have no sound. I use Vista media and my photo is beautiful and I have a volume control and it read hemi healthy, but even to most top level, it makes no sound. What can I do

  nofrill13,

  Video card you have a HDMI output? If yes then your computer has probably set your audio device as the default the HDMI output. To make sure which audio device is the default, please follow the following steps.

  1. Click Start

     The collapse of this image enlarge this image

     

     and then click Control Panel.

  2. Click hardware and sound.
  3. Under sound, click on manage audio devices.
  4. Click on the playback device you want to output sound.
  5. Click on set as default and then click OK.

      

      Another thing to check is your device manager to see what is listed under "audio, video and game controllers". Please follow the steps bellow to Device Manager.

  1. Click Start

     The collapse of this image enlarge this image

     

  2. In the search window type "devmgmt.msc".
  3. You should now see the Device Manager window
  4. Expand it please (click the sign '+') ' audio, video and game controllers ".

  Please answer following questions.

  Question No. 1: Is your audio device embedded it listed?
  
  Question 2: if your onboard audio device is not listed then what is listed?
  
  Question 3: if your audio device is onboard listed is something else who is registered?

  Please make sure that you have adequate resources to re - install the drivers if necessary.

  If your onboard audio device is not listed, you can try to uninstall or disable the HDMI driver (as appropriate) by right clicking and select "Uninstall" or "disable". This could help to redo your default audio peripheral edge.

  Please let us know what your progress and any steps you've tried troubleshooting.
  If you have more questions, please let us know.

  Carlos
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Compaq dc 7800p CMT: install graphics card GeForce G100 on HP computer

  Gentlemen!

  I have an unusual question on installing a GeForce G100 graphics card on my HP Compaq dc7800p CMT. I know it's technically a work computer, but I think that the question applies to any HP computer.

  I got the video card for almost anything and it seems from my investigation that it will work on this computer. The problem is that there apparently is not a standard Nvidia GeForce configuration, but were made for Acer desktop computers. The card has VGA, DVI and HDMI ports. There are standard Nvidia configurations that include the VGA and DVI ports, but not the HDMI - at least that I've seen.

  For the most part, my question is which driver I should try to use it with her. If I download driver Nvidia directly, generic for this card, what happens with the HDMI port? It must, of course, a special driver that Acer with this card allows users who must support the HDMI port, but what will happen if I installed Acer driver for this card on a HP computer? I could live without the HDMI port, but I would be rather functional.

  It is very difficult to get a useful answer forums GeForce on legacy hardware, so much worse if it's an outside-the-box situation like this. Maybe nobody can offer anything other than a guess, but I'll take what I can get. I tell myself that an assumption of a tech-saavy person more than me is better than my own guess!

  Complete information on the map in question follow: GeForce G100 512 MB DDR2 HDMI/D-V FN: 288-50N44-A01AC

  Thank you for interest!

  Grant

  Hi, grant:

  Normally, the Nvidia driver install everything, including audio/video HDMI.

  On the dc7800, install this card will disable the integrated audio system as well as the video integrated, so after installing the card and the drivers, reboot the PC, go into the BIOS, select the Advanced menu and then select the menu options of the device.

  There will be an embedded audio setting and it will be on people with disabilities.  Set to enabled, save it and then again when you exit the BIOS.

  Reboot, then you should have the on-board audio back.

  Before installing your video card, go to Device Manager, click to expand the category of display cards, right-click on the Intel graphics card, select uninstall, check the box uninstall driver too when it exists.  I forgot if it is or is not under Vista.  Windows 7 has this additional option.

  Instead of restart as you are prompted, stop and unplug the PC and install your video card.

• How to install graphics cards on HP Z620 and power cable

  Hello everyone I buy a brand new Hp Z620 without graphics cards. I have install graphics cards already, but I couldn't find the power supply. I have install the OEM HP Quadro SLI 5000 but I can't seem to find the power cable. Can someone tell me where is the power supply for the graphics cards. Thanks AQ

  Hello

  You can get assistance on the HP Enterprise Business Forum.

• can I install graphics card in my computer hp pavilion dm4 laptop... If yes then which 1...

  I want to install graphic card in my laptop please tell me if I can or not... and also how to use wifi miniadpter port. It is here, in my pc, which is its use please inform me

  Hello

  DM4 models do not have the ability to add additional graphics card and you are not able to replace the current GPU because it is soldered to the motherboard.

• Cannot install graphics card GeForce 210

  original title: problem install graphic card GeForce 210 in windows vista home pre. display 32 bits disabled said as instructions device driver but cannot assign pci slot in the bios also in the instructions

  no response but contacted customer service & come to find out the card was faulty thnx anywho!

  Hello diggerjim,

  1. When you install the graphics card, is detected in the BIOS?

  I suggest that you check to see if the graphics card is detected in the BIOS. However, you just contact the manufacturer of the graphics card to have a control over it.

  Since it is a hardware related issue, your best option would be to contact the manufacturer or check with the place where you bought the graphics card.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• JPEG and RAW is more displayed on my screen. even after the graphics card update

  JPEG and RAW is more displayed on my screen. even after the graphics card update

  Click on edit and click Preferences, and then choose the last option which is camera raw.

  on the camera raw preferences, in the lower window, uncheck the box use Gpu option and then restart Photoshop and try again

• Message "no Audio output device is installed" after changing graphics card

  Hello

  Thanks in advance for your help. I have a desktop pavilion, model No. KZ754AA. I just got a new graphics card installed, and as has been done, the above message appears in my "speaker" icon. devices and when I click on playback devices are NVIDIA hdmi output, however, it is said also they are not connected but I know that the cable is properly connected. I used to have installed Realtek I think, but that has now disappeared. I tried d/l of HP drivers, but it still did not work. Help, please. Thank you

  Hello:

  The solution is simple, but obscure.

  So, I'm happy that you came here before making a lot of troubleshooting that most of us would try unless we knew that the answer is simple.

  Why it happened...

  Your PC think you have installed not only a video card, but also a sound card, because it has built-in HDMI sound card.

  Thus, he dutifully automatically disabled the integrated audio system as it disabled the embedded video.

  Restart the computer and press the F10 key at the beginning of the HP welcome screen to access the BIOS.

  Looking for an embedded audio setting normally in the device setup menu.

  You will find it the value auto or off.

  Change the setting to "Enabled". Save the setting it by hitting the F10 key and again when you go out to save settings and exit.

  When you restart in Windows, you should now have your new built-in audio system and when you plug an HDMI cable from your video to your TV card, you should then get the HDMI audio.

  Paul

• STOP 0x0000007F (0x00000000, 0x00000000, 0x00000000) error after installing graphics drivers

  After installing my latest drivers for graphics card, restarting my computer to reflect changes, as it starts a blue screen because of a STOP 0x0000007F (0x00000000, 0x00000000, 0x00000000) error and he said also he is dumping physical memory. I can easily get rid of this error of system restore, but I need my graphics drivers to play games and to load certain programs.

  PS: If it helps my computer sometimes freezes during startup

  Hello

  Check with support of the manufacturer to system and device video/display as they
  are those who write the drivers. Also check with their forums as it could be called
  questions. These companies write drivers.

  For the problem of freezing at startup.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• install graphics card

  I have a hp paviilion p6203 with intregated graphics, want to install a pci graphics card, can someone tell me please how to do this... .do I have to disable the edge etc. ... If so how...

  Thanks for any help

  Hello

  Buy yourself a PCIe 16 - x video card. If you do not want to upgrade the power supply (as it is the only 300w) to ensure that your new video card is only single wide slot.  Install the card into the PCIe x 16 slot more close to the processor. Do not deselect the embedded video. In most cases, the BIOS will automatically select. Plug the connector of the monitor, and turn on your PC. If it recognizes the card... great. Then simply load the driver appropriate for your operating system installed. If the card is not recognized you have to reconnect the connector from the monitor into the onboard video output and go into the BIOS at startup with the F10 key. Search video selection in the BIOS and change to the ANKLE. (PCI Express Graphics)

  Let mekonw how it works.

  Kind regards

  ERICO

• System does not boot after changing graphics card

  I'm under VMware ESXi 4.1 on HP xw8400 workstation. He worked well with HP Nvidia Quadro FX1400 graphics card, but after a while I became tired of all that noise and he changed his Asus Nvidia 7300LE. Now the system stucks on vfat successfully loaded.

  If I re - install the system with this another graphics card, it'll work?

  Strange that a simple graphics as blocked change the boot process.

  Maybe you order card PCI is also change.

  Simple, you can reinstall your host and then re-import the VMFS volumes.

  If you have local storage, make sure not to format the existing VMFS partition.

  André

• After the graphics card, codecs and effects CS5 Ram

  Hi im using CS5 AF with all latest updates. I have a few questions

  I have problem with codecs included in CS5. Please could someone tell me why when I try to "make that" and I tried every possible codec included in cs5 AF output is rubbish as hell. I've been Googling etc reading some forums Adobe, some people say use 32 bits instead 8-bit, else say use this codec rather than some say perhaps maybe hmmm maybe... /... Let me think ahhh this codec is not supported in cs5 AF but it will be in a next version 2025.

  Please could someone tell me what codec should I use to make output look like sh * t rather crappy video standard?

  Saw no problem when I save on my overview of the Office of the ram, it use auto AVI WRAW (1 gb/min) and the video look great im satisfied with the excellent work of RAM.

  When I checked add display codecs in avi, wraw is not included, so I can't use it, but why the hell ram preview use this codec?

  When I use QuickTime mpeg avi codecs etc. included in cs5 the output looks like I don't know even how to describe a very bad image. I tried also to encode the shi * media encoder y output hollow tried h264 etc tried to use other third-party software to correct the bad AF and nothing is helping and im tired. !!!

  How can you sell something Adobe crapp, who does not?

  where is WRAW?

  should which codec I use to make my good 2 min clip look?

  Another thing I thing AF called media encoder please someone could tell me why the hell I can't encode AVI film in it? can get FLV or MPEG etc.?

  the result after that Kiss FLV avi or mpeag etc, is that sound disappear without doubt everyone in Adobe knowledge. could you please sort?

  Why when I use free encoding software such as mediacoder etc. without problem with AVI decoding encoding etc.?

  
  Another Question, I have 4 x ATI HD4850 installed so I would just use it? Why? because everyone on Earth knows that normally graphics cards are designed for graphics... not when you use Adobe products. Adobe preffer to people to buy 280 GB of ram and 20 hearts x Q9000.

  Why the f * K open GL After Effects does not work? just don't ask me what opengl worm can I! When I use open gl rendering is slower with Gpu than the CPU using why which? Why isn't it in MAYA? etc.

  Buy product interpersonal hope it works well? not install then install all the plugins, you need, then try try and try to operate the AF. Long AF me Linux use it still sometimes, when you install ubuntu you need a little time to make your graphics work sound etc many of your devices usually never work because they are not taken in charge not driver or buggy drivers. the thing about linux is that it is free.

  
  Adobe cost money, so people expect it to work I don't have time to wait or try to make it work for the next 5 years!

  Glad you feel better now.

  Did not notice any apologies to Adobe if...

• Display stretched in windows 7 on iMac 27 after updating graphics card

  In trying to solve another problem with the audio, I was recommended to upgrade the video card, so now his Standard VGA graphics card.

  How can I return my iMac 27-the best resolution rather than this tense form?

  

  NVIDIA drivers in Windows 7 environment have been installed correctly.  He has solved the problem of graphics.  Now my audio still does not work, but this stretch problem is solved.

  I contacted NVIDIA support chat and got details about uninstalling drivers, and reinstall NVIDIA versions adapted to my iMac 27 64-bit end 2013.

• install graphics card G5070

  Hello

  I just bought a new laptop model G5070 and its built-in Intel HD Graphics 4400 now.

  Now, I want to install a new graphics card than Nvidia or AMD.

  can I install it my laptop?

  Pranvacp,

  Installation of a GPU dedicated in a notebook is not possible since these models include a bi - GPU GPU dedicated, soldered to the motherboard, and those who are not removable