no more WiFi which extends from the airport express and Time capsule

Similar Questions

• Extend my cable modem network via Airport express and Time Capsule

  I am trying to expand my home network through my Airport express AND a Time Capsule. Installation of extension through the airport was easy and successful. I then tried to expand further with Time Capsule, but it gives me the opportunity to launch a new network. What do different to fix my Tim Capsule to my global network?

  I then tried to expand further with Time Capsule

  Unfortunately, it is not possible to do what you want... given that the function of "extend a wireless network" Apple will not accept to be extended once the network is not two.

  The other question that you probably, it is that unless your 'main' router is also another router from Apple, the Express is not really 'extension' of the network at all, despite what you think.  More likely, the Express is "membership" in the network. It can be used to connect a USB printer remote in this environment or for use with AirPlay... but the Express doesn't "spread" or "repeat" when he joined the network.

  If you want to check if the Express is really extend the network, and you have a Mac laptop... after back and provide you with a few steps.

  But even if the Express could be the extension of the network... Time Capsule will have to connect to the network using a permanent, wired cables Ethernet... ideally to your main router, but it might work OK if you connect to the Express.

• is there a way (or an app?) to set up a local proxy server on the airport extreme or time capsule?

  Hello

  If you have the answer! I'll be so happy!

  is there a way (or an app?) to set up a local proxy server on the airport extreme or time capsule?

  Thanks for your time!

  BR,

  Stéphane

  All routers, including the AirPort base station, run as a transparent proxies for the local network behind them. However, if you are talking about the possibility of proxy requests between the LAN and Internet, then no, the airport base stations do not have a native function to support doing so.

  The two common methods to accomplish this are: 1) use a proxy on your local network, or 2) use a DNS, like OpenDNS service, which offers proxy services.

• MacBook Air Mid 2011 Wifi only next to the Airport Express

  Hey everybody!

  These days I have trouble with one of my MacBook Air. I plug a new as my girlfriend needs a job.

  Anyway. I have updated to OS X El Capitan and struggle with the wifi. I made an appointment at the Genius Bar closest to you to solve the problems in the system.

  As I had to download the OS X on my Mac Pro, I had a problem with the wifi these permissions switch and system information. If you scroll to the installation, there should be a list of installed software. In my case nothing.

  After that the genius of Apple erased the disk and started the installation via ethernet with an Apple Server, I got a new version of OS X El Capitan on it. Everything appears fine (system information).

  The Wifi worked perfectly in the store.

  So, I got not any chance to try at home immediately. Today, I wanted to put the macbook for other facilities. I noticed that the wifi is extremely slow.

  I deleted the cache (which does not yet exist). I have reset the starting power setting. I have reset my Airport express from Apple. I changed the DNS to google DNS (8.8.8.8./8.8.4.4.). I too turned off bluetooth.

  All without any modification.

  BUT if I'm right in front of the apple express (literally sitting on the router), the wifi works without any problem.

  Please, I beg you! I have no idea what to do next. My other Mac Air and pro work perfectly. Any distance. (They have been disabled for testing). iPhone, iPad and Apple TV work fine.

  I seem to have this problem with my MacBook, a model of early 2015. What I was told is that the Wi - Fi antenna is nested in the compartment of the screen, located on the edge, practising thus pressure deforms it. Because the body is made of aluminum, the body involuntarily also acts as an antenna, interfere with the Wi - Fi signal. Here are the two plausible reasons why sometimes the signal is lost or slows down, and it made perfect sense to me.

  Maybe it's the issue here. If that's the case then I would attribute that to the misconception. I'm sure you can get it fixed, although I don't know how you would seeing that Apple seems to weld their new machines stop.

• Airport Extreme and Time Capsule of airport work together?

  I have time capsule and airport extreme. I need to decide if I should sell Airport extreme or is there a way for the two to work together to expand the wifi. Airport extreme can be connected to time capsule and extend the range?

  AirPort Extreme can extend the time Capsule network in one of two ways:

  (1) for the best performance, the AirPort Extreme is located in the heart of the area where most of the wireless coverage is needed, and it would connect to the time Capsule using wired Ethernet wired, permanent.

  (2) AirPort Extreme can connect to the Time Capsule wireless network and to extend the network in this way, if you're ready locate AirPort Extreme to halfway between the Capsule and the area that needs more coverage wireless... And... accept a drop in performance of half of the potential maximum speed on the network.

• Maintain a fixed width design, but which extends from the background with responses?

  Hello!

  I'm working on a site teaser for a kickstarter for a client campaign. I have the design done in Edge animate CC, with a scrolling Parallax mapped to the timeline.  I want to maintain the appearance of width fixed of the drawing or model and hide the overflow on x, but extend the background color for the browser window.  Can someone help me with how to do this?  Site link below.

  http://www.chadwelchart.com/ruinsaga.com/

  Thanks in advance!

  Chad Welch

  Hello

  (1) "hide the overflow on x' ==> sym. $(«elementName») .css ('overflow-x', 'hidden');

  (2) "toextend the background color" to the ==> the $(«body») .css ('background-color', "yourColor"); "

• Help with Airport Express and Configuration capabilities

  I have a new Airport Express which is set to expand the network wireless (created by Time capsule).  Is it possible to also provide a wired connection to another device in this mode?  If so, how do I need to change the settings? The other device is a hub of lighting (not wireless) which must have an Internet connection to allow remote control of lights.  It is currently connected to the CT but its location does not cover a part of the House, the new AE is the perfect place.

  Is it possible to also provide a wired connection to another device in this mode?

  Yes

  If so, how do I need to change the settings?

  Some settings need to be changed. By default, both the "O" WAN port and port LAN <>- both act as LAN ports. Choose one or both to an active Ethernet connection.

  The other device is a hub of lighting (not wireless) which must have an Internet connection to allow remote control of lights.

  Turning off the hub of lighting, make the Ethernet connection to the AirPort Express and the hub of power upward. You should be in business.

• Time capsule airport unplug my Airport Express and internet

  Howdy,

  I just brought my Airport Time Capsule of the work. I have the joint via an Ethernet cable to my extreme, both are in my basement. Upstairs, I have a set Express in place to expand the wireless. The extreme and Express worked for many years now.

  Once the time Capsule has been recognized in the public services of the airport, he made an update of the firmware.

  After that, I edited the settings for the time Capsule to my home network and set it to "develop wireless."

  Extreme, Express and Time Capsule all had them green to light up in public services - so I tried to run a Time Machine backup, and things went sour.

  The cable modem the extreme is connected to started to abandon the connection every 30-45 seconds and the Express light went red and there is no longer recognized, so I clicked "forget" to remove it. Time Machine could not locate the time Capsule.

  So I unplugged the Time Capsule, all rebooted and now my extreme and Express up and running again.

  What waste?

  Thank you

  Dan

  After that, I edited the settings for the time Capsule to my home network and set it to "develop wireless."

  I think you probably mean "extend a wireless network".

  This is the bad setting... because it would be used only if the time Capsule connected to your network using Wireless.  You specify the Time Capsule connects using Ethernet.

  Here is what is happening now... the time Capsule waiting for a wireless connection, but he gets an Ethernet connection.  This translates into a huge feedback loop that effectively blocks your network.

  The correct setting for the time Capsule would be "create a wireless network"using the same exact wireless network name, security and password as other Apple routers. " Finally, make sure that the time Capsule is set to run in Bridge Mode before you click Update to save the new settings.

• Airport Express which runs from the BT Home Hub

  Hello

  I have an iMac and a Mac who need backup, and I also want to extend the signal wi - fi upstairs in my house.

  I bought a time capsule from the airport, the main Airport utility and tried to implement.

  Can I GRT at the stage where it broadcasts a Wi - Fi connection name and I can connect to it OK but it does not connect to the internet.  I'm clicked on edit and go to the WiFi settings and set it to the BRIDGE and put in the name of wifi BT HH and password but still nothing.

  I googled this and there seems to be some discussions that say it last only another apple product and some that say you can use it with HH BT wireless?

  Can someone give me an asnswer difinitive please and tell me how (if possible) to implement wireless to expand the wifi signbal.

  Thank you very much

  Function of "extend a wireless network" Apple owns... .it will only extend wireless signal from another router from Apple.

  At one time... over 3 years ago... it was possible to configure time Capsule to connect to a router from another manufacturer. It is a parameter to "join a wireless network.  But he could not "extend" the network when he does this.

  The "Join" option has been removed since more than 3 years, because it was highly reliable.

  If you want to use the time Capsule with the Home Hub, Time Capsule must connect to the Home Hub using wired Ethernet wired, permanent.  Then, if you wanted to "extend" the signal Time Capsule wireless wireless, you might add another router from Apple, such as an AirPort Extreme or AirPort Express.

  The bottom line here... If you want wireless "extend" an Apple product, you will need two routers Apple to do.

• What is the best way to connect a time capsule from the airport to an existing dsl router?

  I have a Netgear D6300 router with built-in ADSL modem and I'm getting a time capsule from the airport. I thought to put the D6300 in Bridge mode and connect the TC via a ethernet cable but my netgear router is kept in a metal TV armoire or I asked myself if I put on the floor and used to extend my existing wireless which is a little spotty on the floor, but I didn't know if the connection on the hard drive would be too slow. However I read in another post is no longer that apple supports the extension of networks of "no apple"?

  The time Capsule will connect to the Netgear router using a wired Ethernet cable connection, permanent... no matter how you decide to configure things.

  Regarding the location, Time Capsule can be located just about anywhere that it will allow an Ethernet connection. If you want to time Capsule to "extend" the wireless Netgear, and then configure the time Capsule to create a new wireless network that uses the exact same wireless network name and password than the Netgear router. The result will be a network of 'big '.

  Should be a lot more work, but assuming that the Netgear gateway can be configured to work as only a simple modem, the Capsule can be configured as the primary network router.

• can a wifi with an airport extreme network be extended with two Airport express wireless?

  I have developed successfully the range of my wifi network by connecting an older brick of Airport express to a new airport extreme. Unfortunately, there is a room more than I would like to achieve, so I'm trying to add a second (newer) to bring in this room to get full coverage. When I try to set up in the airport utility it hits an "unexpected error" message continually or breaks down the network. should I change in the settings? the express environment be on something else (like a relay?) in order to allow the new express to join the network? I have reset the factory default final express and tried to let the wizard implemented to extend my existing network.

  I understand that I will sacrifice speed, but there is no way to connect them at the present time. worst case, I should better results if I break through the floor and the extreme of wire in the Middle express?

  Thank you

  David

  Sorry, but Apple will allow you only to wireless "extend" the network once, not two.

  In other words, just about any device that "extends" the network must connect directly to the 'main' router... not to another router that is already expanding the network.

  Another way of saying the same thing... both your need for extensions at about the same distance from the 'main' router and two extensions should be closer to the main router they are to each other.

  You want to continue trying to implement the 2nd AirPort Express Terminal?

  "I should better results if I break through the floor and the extreme of wire in the Middle express?

  
  

  Yes, that would allow you to do what you want, assuming that the 'remote' Express can pick up a good signal of the Middle Express wireless.
  

• How to connect the Airport express as an Extender for airport extreme to El Capitan

  I have a model extreme A1521 airport and a model express airport A1392 and upgraded my OS to El Capitan. I want to use the express as an Extender for the extreme because my old House is long and has thick walls. My problem is that Airport utility will not 'see' the express, regardless of its proximity to the main router (extreme). I tried to move and reset.

  Of course, as soon as I get the utility to see, I need instructions on how to configure the express as a booster for my extreme.

  Any ideas?

  Unplug the Express and put it in the same room as the AirPort Extreme.

  Put power on the Express for a few minutes, then hold down the reset button on the back of the Express for 7 to 8 seconds and release.

  Allow a minute for the Express to restart

  

  Click the WiFI icon at the top of the screen of the Mac

  Look for an announcement of the new AirPort base station

  Click directly on the AirPort Express Terminal

  

  When you click on AirPort Express, the "Wizard" will open and take a few seconds to analyze things, and then see a screen that looks like the figure below, except that you can see your cameras.

  

  Type a short and simple name that you want to call the Express

  Click next

  The installation wizard will take care of everything for you

  When you see the message Setup is complete, unplug the Express and move to halfway between the AirPort Extreme and the area of the House that needs more coverage of wireless signal

  Turn on the Express and you're all set

  Important note... the Express to expand the quality of the signal it receives. About half of the potential speed on the entire nextwork is lost when you extend using a wireless connection between the airports.

  It would be much better if you could connect the Express to the extreme by using wired Ethernet wired, permanent, since there is no loss of signal via the Ethernet cable and there is always a lot of loss of signal through the air, the (thick walls especially) walls, ceilings, etc.

• American express from the airport to the Denmark?

  I bought an Airport Express to the United States to be used in both Denmark and the United States. It worked completely fine and establishment has been quick. I just arrived at the Denmark, and now it does not connect to the internet. I generally just connect to the internet via a port ethernet in my house, but instead I wanted to connect the Airport express of this cable, so I can use wifi when I'm there. The router shows a green light for the internet, but I can't connect. This unit will operate the Denmark and the United States?

  Thank you!

  I generally just connect to the internet via a port ethernet in my house, but instead I wanted to connect the Airport express of this cable, so I can use wifi when I'm there.

  Is 'this ' Ethernet cable one? You have access to the network device (modem or router) that the other end of this cable connects to?

  Generally speaking, you need start a "fresh" installation or the AirPort base station when you connect it to another ISP or router. I seriously doubt that you can "just plug" and it will work without doing it. Here are the basic steps to use when you change ISPS.

  This unit will operate the Denmark and the United States?

  Perhaps, but the Denmark would not be one of the countries that the American version has been designed for. The two questions that you are:

  1. Have the good taken AC for outputs used for the Denmark.
  2. The US base station can not supported all channels of connection Wi - Fi available at the Denmark. Worse still, it can leave for strings that are NOT permitted in Denmark, such as those used by the military.

  You can use AirPort Utility to quickly determine which countries are supported, as follows:

  • Run the AirPort Utility, select the base station and then select Edit.
  • Click the Wireless tab, and then select Wireless Options...
  • Click the country field and all available countries will be listed.

• Is it possible to use express Airport and Time Capsule both as two Wifi-repeaters at the same time?

  Hello

  I have a time Capsule from the airport. I use it for my back ups and he repeats my wifi in the House (bottom).

  Now I need a Repeater wifi upstairs. I think to buy Airport Express. I will connect the Airport express with a Lan connection on the floor. And then I would also have wifi on the floor.

  But is it possible to use the time Capsule Airport express airport and at the same time: two repeaters-wifi?

  1. I have a Fritz! Box router / wifi (we called wifi Fritz! box)

  2. I have a time Capsule airport / wifi Repeater (we called the turtle wifi)

  3 and now I want Airport express on the floor for the wifi upstairs (another name for this wifi?)

  Is this possible?

  Before I had used TP-link (in socket), but it works for a few months.

  Thank you for your help and advice.

  2. I have a time Capsule airport / wifi Repeater (we called the turtle wifi)

  I think that your terminology wrong... the TC cannot work as a Repeater in the Frtiz.

  I think that you have done is connect via ethernet and run it as wireless... or WAP Access Point. It is perfectly great way to do it.

  3 and now I want Airport express on the floor for the wifi upstairs (another name for this wifi?)

  This is connected by ethernet, then it will work fine... you can call it Expresswifi

  You are certainly going to clutter the wireless channels, you could so be interesting rather than auto setting fastenings.

  2.4 ghz has been set to 1, TC 6 and 11 Express then Frtiz.

  5 GHz is less of a problem... auto should be fine, because the beach is mediocre.

• iPhone 6, connecting to the Airport Express wifi, blocking all the other wifi equipment.

  Hello

  My home wifi network, it's an Airport Express station. I then several other devices that connect to it - two AppleTV, two MacBooks, an iPad and iPhone two 6.

  I recently had to replace one of the iPhone 6 and every time the iPhone connects to wifi of the Airport Express - the connection made the deadlock on other devices. This forces me to turn off the phone's wifi and now I do the connections of the hanging of the other devices start to work.

  The new iPhone replacement to restore a backup to iCloud. I also then reset the network than the iPhone settings when I first noticed this wifi connection problem, but the problem persists.

  Thoughts on how to fix this?

  My solution, after two devices, and visits to the Apple Store Genius bar was to do a full reset of the device and do not restore from a backup.

  For the appliance swaps were probably not necessary had we done the software reset and restore from scratch first.

  Geniuses and I were not able to find the cause of the problem.