No mouse works, all recognized devices, the strange slider movement

Similar Questions

• Leave the mouse works all of a sudden

  Original title: mouse problem

  Hello

  Today, my mouse works fairly suddenly.  I had not installed a new software or hardware which could have come into conflict with the mouse.  In addition, I tested in the other USB ports on my computer nothing works.  The mouse works on our family another computer, is not that the mouse is broken.  Other USB devices on my computer work always correctly, so I am at a loss as to why the mouse leave so suddenly. In addition, it seems that the system restore lacks the previous points can I restore, while the option is out.

  Do that, does not work.  I noticed that I have a Code 43 error in Device Manager now if that helps at all.  I tried to reinstall my chipset also for USB drivers, but that did not help either.

  {edit} I managed to solve the problem.  It seems that my 1394 port was interfering with my ports USB in a certain way.  I tried uninstalling the driver for that and restart and now the mouse works fine.  Thank you very much for your help!

• I want to get comp.mouse working again, was using the usb port.

  damthisthing

  I would like to get COP mouse works again

  Hi frankdnls640,

  (1) remember you to make changes prior to this problem?

  (2) what is the number of brand and model of your computer (and mouse)?

  Method 1: If it's a USB (Universal Serial Bus) mouse, unplug and reconnect the mouse into a different USB port and then check to see if it works fine.

  Method 2:  Using the keyboard, run the fixit available in the link below.

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/en-us

• Exit button doesn't work is not on the Master Slide

  I have an exit with the attached exit action button on my e-learning project in model of slides, poster so all on all other content model of slides. This, in turn, displays the button exit on any slide I want to add to my project. Is there any reason the exit action attached to this button may not work? Whenever I am in my project to examine, the button never closes the project. It is just click, but does nothing. Do I need to have the action of the button available on the slides to master CONTENT rather than the main model of slides?

  

  @wc @ fmiosa as moderator, I have to ask you to NOT post answers that are wrong or mislead other users of Captivate. I considered that the deletion of your response, but you are going to insult me (new) if I do. When you say "Buttons do not work when, on the model of slides", your response seems to say that you can insert buttons on a master slide, but they never work? This is not good at all: If you can insert a button on a master slide must be a button of form because the other buttons cannot be inserted on a master slide at all. Apparently you missed the appearance of form buttons, almost 4 years ago. They are interactive objects only you can use on slides of masters, you can insert on the first slide and the time for the rest of the project, you can use them on the question slides and slides of score. If you always use the Captivate 5.5 or before, which mentions at least in your response, adding that this could change in future versions

  Why I like the shape buttons - Captivate 6! -Captivate Blog

  Shape toggle - Captivate 6 - Captivate blog buttons

  Buttons on Question/Score of Captivate 6 slides? -Captivate Blog

  1 share = 5 buttons toggle - Captivate blog

  Lilybiri

• the ToolTip that fleet upward when you hover over a link with a mouse works erratically if said the link is in the lower left corner of web page

  So the title says pretty much everything that, but I would stay again.

  There is a small balloon that floats to the top in the lower left corner of the browser window when you hover over a link on a page with a mouse. The address of the link leads, indicates in the ToolTip.
  However, if the link in question is in the lower left corner of the Web page, the ToolTip floats high above right. Then he disappears to reappear a few milliseconds later. This blinking persists; You can neither do address or click on the link. By pressing several times shows RMB RMB menu for the link, which finally allows you to copy the link location and paste it into the address bar.

  Try disabling the Redirect Remover extension if you have. Disabling this extension worked for me which allows the address bar that appears at the bottom left when you move to a link to the right in certain situations.

• Need help to get my mouse recognized, all started after the installation of the center of the keyboard and mouse

  Original title: Microsoft mouse and keyboard Center

  Hello

  I'm sure this question has been asked and answered before.
  But I just bought a mouse Microsoft Sculpt comfort, downloaded and installed M and K Center. But it does not recognize my mouse, I plugged the mouse to my laptop until I downloaded M and K Center and it worked fine, but all I want to do is program the side button.
  I use a Lenovo ThinkPad X 61 with the latest drivers for Bluetooth and Win 7 Pro.
  Is there something I need to do to get my mouse to be recognized by the centre of keyboard and mouse?
  M

  Hi Matt,

  Please write to us.

  I recommend you to uninstall the drivers of mouse from the Device Manager, then use this link http://www.microsoft.com/hardware/en-us/p/sculpt-comfort-mouse#support to install the drivers. Please select the operating system and the correct version before installing.

  Same thing applies to the mouse and keyboard Centre has as well, use the same link to install the updated drivers after you uninstall from the control panel.

  Nice day!

• USB not recognized device error with the Logitech Wireless Mouse

  Greetings, Im having trouble getting my recognized usb wireless receiver. Worked fine on Vista premium edition... recently updgraded to windows 7 do not work now? I tried Device Manager to scan for hardware changes... no luck. I tried the Drivers but logitech claims it is compatible with windows 7 and you don't need all drivers... would appreciate any help!

  Thank you
  Stem

  I also had this problem, but finally found a solution. You need to reset the motherboard. It is more than a simple reset of the computer as the motherboard continues to feed into "stop".  You must turn off the system and unplug a few minuets.  In the case of my laptop, I also removed the dough for good measure.  Then I turned it back and the mouse worked without trouble or the same recognition that there had never been a problem.

  Credit when it is earned, I found the solution here http://www.online-tech-tips.com/computer-tips/usb-device-not-recognized/

• Just starting to use flash CC pro using a PC. The mouse does not work on all popup windows. It works very well on the selection of everything etc, but not on the pop-up windows? Any advice? Thanks, Jim

  Just starting to use flash CC pro using a PC. The mouse works on everything except the popup windows. Any advice? Thanks, Jim

  kglad and Mohan, thanks for the help. I found what was wrong. I had the text of the rule too high DPI screen. I lowered and the mouse works on everything except that it's harder for me to see.HA apparently it was causing a conflict with the mouse. Maybe this will be useful to help someone else down the line. Thanks again, Jim

• The mouse works in the login screen does not work after logging in

  I have Asus new laptop with touchpad mouse.  First two weeks worked satisfactory mouse.
  The mouse works now, after booting the computer login screen (i.e. the scrolls of the mouse on the screen and can use the mouse buttons to select the user).  However, once connected, the mouse does not move.  Just it centered in the screen.
  Manager device indcates unit operate properly.
  Thank you!

  The laptop is new, contact Asus.

• V.8 inDesign crashes on startup and loading Panel, after which works all fine, except...

  V.8 InDesign crashes on startup and loading, after which works all fine, except the Panel who are slow like crazy. Replacement by default/history, has no effect.

  Is there any help for this issue or it's political Adobe to care not at all?

  Nicely,

  Damir

  CS6 is not supported because there is no financial sense to spend money trying to 'fix' an old program to run on a new hardware/OS with (no guarantee of success), or a willingness of users to pay for repairs when new versions are already in operation. There is no reason why you can't continue working in CS6 - do - if you don't need the features that have been added since then. You just need to run it on a compatible hardware.

• Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device

  Hello

  I have a Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device. I uninstalled and installed Arcsoft Webcam Suite, which has drivers, but nothing new.
  It seems that the built-in webcam is not connected.
  Thank you

  See Sony support site or their forum, this is a Sony webcam

  And no this isn't a feature of device, or something that should appear in the devices & Printers

• CD/dvd drive does not work - it is recognized when the computer starts, and it is listed in the Device Manager?

  I am running Vista Home Premium on a laptop Compaq Presario F700. It is listed in the list of computers of readers, it is listed in Device Manager. The lites drive that the computer boots so I know it is detected. When you run itunes or media player the player does not open. When I push the drive button it will not open. It opens with a paperclip in the exit hole. It cannot read a CD or a DVD. None of the media players even recognize there is a disc in the drive. I tried to run fixit, but it would not drive either. I tried restoring from a previous backup, without change.

  Hello

  Check / settings (BIOS/CMOS) often F2 so watch the screen as it starts - place CD/DVD
  1st in the boot order (remember to put it at the time where the fact).

  Then put in a DVD to boot Windows and see if the driver works.

  If it doesn't then it's a hardware problem.

  =======================================

  If the drive has worked in the test above, that these can help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My mouse no longer works 2 days ago... I restored my pc on the eve, it works... but that did not help my mouse. This mouse works on another pc... I am getting error usb? I removed & charged all under the usb tab__

  My mouse no longer works 2 days ago... I restored my pc on the eve, it works... but that did not help my mouse.   This mouse works on another pc... I am getting error usb?  I removed & charged all the usb tab

  Hello

  You may need assistance from a real store tech computer (no leeks and glances at a BestBuy or)
  other BigBox stores) or the manufacturer of your system Support.

  What is the error of USB?

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Please make these now even though you might have tried this before:

  Remove the mouse if indicated in the Manager of devices - devices of score - click right on - UNINSTALL.

  Then lets refresh the USB stack

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• After freaked out power, my mouse pointer is frozen on the top left of my screen. I disconnected all devices and it is still frozen

  After that my electricity freaked out when I try to restart the computer, the mouse pointer is frozen in the upper left corner of the screen. I rebooted several times and it is still stuck. I also unplugged all devices. Any suggestions?

  Boot safe mode and test.

  https://support.Apple.com/kb/PH21875?locale=en_US

• I have no sound on my PC (with the exception of BEEEEEEEPS!). I checked under the hardware profile and all audio devices work but when I go in the sound settings it says there is no device installed.

  I have a HP Pavillion PC that I am running Windows XP Home Edition with Service Pack 2 on it.

  In the device section in the Control Panel, it says that all audio devices are working properly.  I even went to Microsoft Help on each one and there is no solution.

  When I go to Sound Devices, once again in the Control Panel, I see a message on each tab indicating that no device is installed.

  Other noise problem, I have no other problems.

  Help, please!

  Hello Sonier,

  Thank you for your message.  Do you know what type of sound card you have?
  Click 'Start' > right click on 'My computer' > click 'manage '.
  Click on Device Manager.
  In the right pane, click the (+) sign next to sound, video...
  Underneath, you should see your sound card.
  With this information you can go to the manufacturer website and download/install the latest driver for your card.
  Please let us know if this information was or was not useful for getting your problem be resolved.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.