no name problem

Similar Questions

• expdp - name problem

  Hello guys,.
  
  I use Oracle Database 11.2.0.2.0.
  
  Well, I'm trying to generate a dump using utility expdp. Here's him parfile:
  
  UserID = "/ as sysdba".
  Full = Yes
  dumpfile=expdp_vvp_full_00%U.dmp
  logfile = vvp_full.log
  job_name = jb_vvp_full
  parallel = 4
  file size = 10G
  Backup_dir = directory
  compression = metadata_only
  
  I understand that the parameter ' parallel = 4' working with the parameter "= 10G file size ' will build the dump in 4 10 GB files each [the last of them can be smaller]."
  
  I updated this place everyday in the crontab: worked today, but tomorrow it will tell that the file already exists and will not discharge.
  
  I tried to change the name like this: expdp_vvp_full_00%U%d%m.dmp
  
  But these '%m %d' did not recognize expdp [but in utility exp, it works],
  
  You guys have any advice to help me with this problem?
  
  Thank you.

  Hello

  We have scheduled the backup expdp using below shell script. This script will create a dump with fileno-month-date-hour-min-sec.dmpfile, dump if file, the log file name will be unique.
  --------

  #! / bin/sh
  # Author:
  # Script: schema_bkp.sh
  # This script will run every day night at 4:30 hrs and takes a level of backup scheme
  #

  # Script starts...

  . /Home/Oracle/.bash_profile

  # Now its time to logical backup
  #Set the directory of Archives

  ARCH1 = ' / orabackup/DB/logic / '.

  #Delete old backups logic/orabackup/DB/logic/volume when you access does not since 3 days

  echo "cleaning of the old logical backups on/orabackup/DB/logical/compressed more than 3 days...". »

  find $ARCH1-type f - mtime + 3 - exec ls ().
  find $ARCH1-type f - mtime + 3 - exec rm ().

  export of echo...

  expdp system@db directory = expdp_db = % DB_Schema_File_00 U_ dumpfile' day +%b_%d_%H_%M_%S.'dmp logfile = DB_Schema_File_' day +%b_%d_%H_%M_%S.'log the file size = 3g = AUDITOR schemas, USERS, HR job_name = DB_schemas_bkp_'date + % parallel b_ % d_ % H_ %%s M_ = 4

  gzip-9 /orabackup/DB/logical/*.dmp

  ------------

  This can help.

  Kind regards

  Srinivas

• Developer account name problem

  Hey, I would like to know why is the default name of my developer account different from my Apple ID because it has been created from this same Apple ID should some sort of confirmation from Apple to make it the same or I have to do something else? Thanks in advance!

  Hello StylianChairo,

  We are just other customers from Apple here. We cannot answer any question 'why' like that. If you create a developer account, then the name of this account will be your real name associated with your Apple ID. It will not be your real ID of Apple. You are not allowed to change it. If it is in fact wrong, then you can contact support at Apple developers and they should be able to fix it. Just be persistent.

• Publishing: consistency of the domain name problem

  , I replaced an existing by one created in muse site. A shared University hosted the original site server and the other was placed in the same directory. Download muse, I gave the new site with the same URL as the original. But pre-existing links to the old site now gives a Page not found error and search engines cannot find the new site, even if she seems to be online and can be found with the URL. When I compared the URLS, it turns out that the Muse site has finished http://faculty.washington.edu/dparichy while the old site was http://faculty.washington.edu/dparichy/Index.html. I tried to reupload the Muse site with variant multiple URLS to match the old URL of the site, and I tried to rename the home page on the new site. But I still can't the new site to be findable through external links or search engines. Any suggestions? Thank you

  I checked the two URLs and seems that the problem is resolved.

  Thank you

  Sanjit

• Police XI Acrobat pro name problem

  Hi all

  While checking the PDF font properties in Acrobat XI it only shows the name of the font family. Not the full name. In Acrobat X, it was perfect. Please see the image below marked in red. The real name of the font is "Diary Light Extra Condensed Italic", but the property box shows that the order of the day and italic is Hi-lighted. The font of the document properties shows the correct name. Did you experience this kind of questions? See the full name of font is very important for me because I am in the position of the QC process before printing.

  

  Your suggestions are welcome.

  Thanks in advance

  Arul

  What you see in reality, this is the feature that is certainly not all that robust in terms of how it gives access to the fonts in TextEdit.

  If you try to check the use of real fonts for particular text, you should go to the output preview and change the Preview of the separations in the object Inspector. Click the text that you want to review, and this tool will show you exactly what font is used to render the text with the name of font, point size, etc..

  -Dov

• date of creation of the renaming name problem

  Hello, when I import and rename the lot of avchd files, I choose Rename with date/time of creation AAAMMDD HHMMSS.

  But the name that is created to import name. All I want is the same date, which is imported from date.

  Metadata is good. For example, a file with the 20140605 creation date, I'll have the creation date which is the date today and the time.

  Everything I chose date creation or import.

  Can you help me?

  Thank you

  Hi Kanadiou,

  When you rename choose date/time, it tells you the file creation date and time. This you can check in the file properties.

  You can choose a predefined custom text field and fill in the date and time that you want for the particular file.

  In fact few of the fields predefined (text personalized and custom Auto increment; check the screenshot) can be customized, and the rest of the fields display values fixed by renaming.

  

  I hope it helps.

  Thank you

  Mayjain

• Domain name problems

  Hello

  So, I have a site that I want to create on muse and I am trying to publish it.

  I already have a domain name under my name that I want to link the Adobe site muse with. but when I say that publish it asks me to type the name of the site with one (. businesscatalyst.com) extension. But I'm trying to get rid of this businesscatalyst and I want just the site of my name

  How do I do that?

  Hello

  Field with. businesscatalyst.com is url system that will be created by default. Published site the BC will generate system and ensure the URLs that we cannot remove.

  Regarding the addition of your domain by default, you can do so from the end of BC.

  The process would be:

  -Publish the site

  -Connection to the Admin > Site Settings > settings of the domain

  -New domain > Add field

  Follow:

  http://TV.Adobe.com/watch/Muse-feature-tour/Muse-choose-your-hosting-provider/

  http://TV.Adobe.com/watch/learn-Muse/publishing-your-site-to-business-catalyst/

  You will also need to delegate the domain:

  http://helpx.Adobe.com/business-catalyst/using/change-site-domain.html

  Thank you

  Sanjit

• instance name problem breaks my brain

  How can I create an instance name for a Child MovieClip?

  because I want to do 2 a hittest with a Child MovieClip heres my code:

  Var ID = setInterval (createCopy, 1000);

  var counter = 900;

  
  

  function createCopy() {}

  var c:MovieClip = new bulb();

  addChild (c);

  c.x Fokker-built = Math.Random () * stage.stageWidth;

  -counter;

  If (counter < = 0) {}

  clearInterval don't (ID);

  }

  }

  I want to do a hittest, I tried this:

  If (c.hitTestObject (Player))

  {

  -life;

  }

  but I doent work he says theres nothing with an instance name of c

  But what I do not understand how said the c.x Fokker-built = Math.random () * stage.stageWidth; code worked?

  Please answer I have ive been stuck on this the day of hole

  Hello

  #1

  your variable named 'c' is local - so if you try to access outside the method "createCopy" you will get the error.

  #2

  There is a "name" property on MovieClip (from strict DisplayObject):
  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/display/DisplayOb ject.html #name

  that you can use to give the unique name of the instance, and then retrieve it under this name using the getChildByName (...) method:

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/display/DisplayOb jectContainer.html #getChildByName ()

  See this thread for the use, for example:

  http://forums.Adobe.com/thread/854911

  HTH,

  Kind regards

  Peter

• DataGrid column name problem

  Salvation;

  I am new to flash ACE.

  DataGrid column name codes...
  

  Code:

  var dp:DataProvider = new DataProvider(); dp.addItem ({column1: 'xx', Column2: "xx", column3: 'xx'});

  works fine but if I am the change of name of column to numeric value (for example: 32) gives me error...
  DataGrid is not supported numeric value?

  Thanks for the help...

  Use a string like: '5 '.

  dp.addItem ({"5": "xx", Column2: "xx", column3: 'xx'});

• Winmail in vista mail export then problem of file name different when imported into windows live mail?

  win mail in export Vista mail then face the different file name problem when importing into windows live mail?

  I have dell laptop and vista 32 - bit os worm and now I change my laptop and have os windows 7, but when I export the name of folder windows vista mail rename (long file name) so when I import in windows 7 in the windows live mail client it is not imported as well as in win mail. folder and sub-folder is not in good
  the path folder and subfolder and subfolder; s subfolder is not to this strucherd only in win mail in vista. so, how to solvedthis problem and I want to win software mail in windows vista then where to download in windows 7. PS please help me I have the database of records of mamy creat inside.

  Hi ChintanThakkar,

  Since you are facing problems with its import to Windows Live mail, you can publish your application in the Windows Live Forum for assistance.

  Windows Live Support

  http://windowslivehelp.com/solution.aspx?SolutionID=0f26bfb0-7799-46a9-A969-dfc8186110f7

  Hope this information is useful.

• Problem in the case of storage expansion

  Hello

  I'm sorry, but I have created a document instead of a new thread here. Could you pls have a look at the document with the same name, 'problem in the case of storage expansion '.

  Thank you

  Hello and welcome to the forums.

  Have you tried the same operation by using the vSphere client connected directly to the ESX host and not through vCenter?

  Good luck!

• Game download

  I'm trying to download a game called, "Sequence of the Bible".
  and it says it downloads, but when I go to run it, I get a warning that says: "C:\Users\Rachel\downloads\Bible Sequence.exe is not a valid Win32 application". And it wont let me click, "ok."

  The site I find the game on East, http://www.godlygrace.com/fun.htm

  It is the second game on the page.

  Thanks for your help.

  Take a look at http://www.computerhope.com/issues/ch000726.htm

  Cause:

  This problem may be caused by one of the options below.

  1. File is corrupt, missing, or bad.
  2. File is not designed for your version of Windows.
  3. File is a virus, worm or other malicious program file.
  4. Hardware incompatibility.

  Answer:

  File is missing or corrupt, bad,

  If the file or program you are trying to run is damaged or missing, Windows may not run the file correctly and sometimes generate this error message.

  Download files

  If you have downloaded this file and verified that it is complete and compatible with your version of Windows, delete the file and try to download and run again. It is possible during the download, the file is corrupted.

  Finally, if the second download does not work, try to download the file to a different Web page. It is possible that the person or company to maintain the website downloaded by mistake a corrupted version of the file that you are trying to download.

  Installing a program from a CD or another disk

  If you try to install a program and you get this error, check that the CD is clean. If the CD is dirty or bad, you might get this error during installation and/or get this error after the program is installed because it has not been copied properly on the computer.

  • Additional information on a CD of our cleaning pagecleaning is provided.

  Execution of a computer program

  If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  If the hard disk is damaged or badly, it can also cause work programs to fail, either because not all data can be read from the hard disk the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.

  Long file name problem

  Make sure that the program or file you are trying to run does not contain the same name as the long file name directory in which it is contained. For example, executing a file named "program" in the directory "program files" can cause errors in certain versions of Windows.

  In addition, if you are trying to install a program, and the program does not work after installation, you can also try to install the program in a different Directory.

  Wrong file

  Any file can be changed or renamed to be a .exe file. If you have downloaded the file, make sure that the file is supposed to be a .exe file and that it is not changed. If you try to create a .exe, file make sure you compile the file for Windows and never just to rename a file in an .exe file. For example, rename a file .bat to .exe file will not file an executable file. For a file is an executable file must be compiled or converted with software designed to convert the file.

  MCP. MCDST. LVL 80

• I need a free software for organizing files!

  I just got my Fuze and I transferred some songs (drag and droped in Explorer) but when I tried to access it in the player he often told me that an artist was 'unknown' for a file, although many other files on the same album have been recognized. I know it is a problem of marking, but windows cannot change the tags. I tried windows media player, that will let me change that I can tell. I NEVER had this problem with my Creative Zen, he told me that these same files have been recognised and it came with the media programme could manage them easily. Unfortunately that only works for creative products, is no use to me here.

  Also, I tried to use the system folder instead of the tags and I had another REALLY stupid problem. He let me to name the folders in Explorer, but when I access them on the "rocket" I get the names of corrupt files. Often they would retain the "new folder" name instead of what I named them, but also, I'm going to get a bunch of BINARY numbers in the name! Why?

  I had this player for 2 hours and I'm already really frustrated.

  Oh and yes I have updated the firmware already.

  [edit] Try to install rockbox, of course boredom. * beep * program does not even detect my player. Also, it looks like I can't return this thing; _ ;

  1.), you meet the 'names' problems and cannot install Rockbox because you're in MTP mode. I don't know exactly why, but this mode is a problem of renaming of files. Rockbox only works in MSC mode. I would recommend formatting the player (in settings > system settings)< format)="" which="" will="" erase="" everything="" on="" it="" (not="" firmware="" or="" operating="" files)="" so="" you="" can="" start="" over.="" switch="" the="" player="" to="" msc="" mode="" (don't="" use="" the="" auto="" defect="" setting),="" plug="" back="" into="" your="" computer="" and="" drag="" &="" drop="" away.="" your="" files="" will="" retain="" the="" same="" names,="" and="" you="" can="" install="" rockbox="" if="" you="" wish.="" although="" i="" would="" advise="" against="" this="" until="" you="" get="" a="" little="" more="" used="" to="" the="" player="" as="" it="" is.="" now="" you="" can="" also="" use="" the="" folder="" navigation="" in="" the="" music="" menu="" to="" find="" &="" play="" your="" files="" if="" you="" wish,="" or="" you="" can="" .="" .="">

  2.) download & use MP3Tag to edit and correct your tags. It's simple and it's free. The default writing ID3v2.3 ISO-8859-1 and re - save files. Then transfer to your player. Now they don't appear under "Unknown" and you can browse through the lists of the player (populated by ID3 tag info) to find and play your music; no necessary Rockbox.

• Advice needed w / BlueScreen crashes & other questions

  My problems with my PC started to happen a week ago, so things are a bit cloudy, but I'll try to describe what happened as best as I can:

  I have a Core 2 Quad Core 2.4 ghz Dell PC games with a Nvidia 8800 GT 512 MB series video card. I believe that I have Windows Vista Home Premium 32 - bit OS. He brought me 3 years of great gaming experiences. He ran all the games that I threw at it. Last Friday, I decided to try one of those to play online MMORPG. If after downloading and installing the game, I noticed that my monitor turns off during the game. I thought nothing of it at the time I thought it was characteristic's fiery energy saving. Since it was my first time, the game, I thought maybe it was a common problem in this game here. Saturday afternoon, things started to get worse. By practicing a game I have played several times before this incident, my monitor has started to fade in the middle game. When he came back it is on the "Blue screen" screen of the failure. This has happened several times, each to say something in the sense of "display driver has encountered an error and could not recover. When I clicked on more information, it was this: (re-written by hand)
  Signature of the problem:
  Name problem: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  More information about the problem:
  BCCode: 116
  BCP1: 869 5510 C
  BCP2: 90A10F20
  BCP3: 00000000
  BCP4: 0000000D
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  On the solutions tab, he registered 4 options, all involving updating drivers display but in different ways. I went to the Nvidia site and downloaded and installed the latest drivers for my graphics card. It does not help at all. Then, I downloaded the latest virus definitions and tried to launch a complete system using Norton virus scan twice. Other a few tracking cookies, it says that my machine was clean. I ran a full scan of the system with Malware Bytes. This program, said that my machine was clean as well. I then disabled Norton, allowing me to perform a system restore and I went back to a date before I met problems. The game I tried to play always kept crashing in the middle game, back to the blue screen. At that point, I gave up for the day.
  When Sunday rolled around, I tried to turn on my PC and couldn't even get into windows. It just kept crashing repeatedly on the blue screen once I put my user password. After the safe boot mode, the problem seemed to go away. I might actually get into windows in normal mode. I tried to play the same game as I was the day before. This time, instead of crashing on the blue screen, my screen would glitch out with distorted on the screen and flickering before the freeze tasks and forcing me to power down by holding the power button. After reloading windows, my screen would always twinkle randomly, this time outside of any game. I tried to load other games, and they have froze as well. I could always watch movies without any problem.
  Monday is when my PC bit the dust. I was getting flickers of light on the screen. Sometimes the screen would just go black, then the screen would be cut off, back on, again and again. Sometimes he just would go black and never arrived, forcing me to turn off the power button. Then when loading windows, it would be just a black screen, showing only the cursor and the loading sign. When I booted in Safe Mode, the colors of the screen became distorted and my screen went in the lowest resolution possible. Now I see only the basic colors, and the resolution can not display even all my icons on the desktop, because it is so extended. I think that by default, the display is stuck in 1 lower than 800 x 600 resolution. I can't change the resolution. If I try, nothing happens. There are distortions for reasons that appear when you start the computer to the top.
  Is it possible to fix my computer
  ? Now my computer is pretty useless. Is it a super virus that destroyed my computer without even being detected by anti-virus programs? Or has my graphics card decide to have a magma down? I hope to exhaust all other options before to go out and spend $ 200 on a new card and I would come if I discovered that the card wasn't even the problem.

  I think that your video card has probably seen its best days. If you Google BCCode: 116 and follow some of the many threads, 116 leading usually to the graphics card. Because you tried latest drivers without improvement, and now the Display Mode without failure is affected, the replacement may be your only option.

  You can see the rear panel of your Dell to see if he has a VGA connector for onboard video; the nVidia 8800 GT may have been part of PC games package.

  BTW - you should be able to find a good nVidia adapter based for under $ 100

  The manufacturer of the Chipset Newegg.com search result: NVIDIA

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene&N=100007709%20600030348&IsNodeId=1&name=NVIDIA&order=price

  I hope this helps.

• UPDATES DOES NOT AUTOMATICALLY CROSS!

  My fair updates will not automatically refresh and the little icon saying that windows cannot check the updates and an error keeps the code number: 8024402F. I tried to reset the automatic section but it just won't download updates automatically. I am on Vista Home Premium and also on all browsers last as IE9, etc. Driving me crazy. Can anyone help? I just want to know why it is he said that everything is normal and ok, but when I check the updates, it comes back with this message. Tried the name problems... you it we did. It is just too difficult to do manually.
  Thank you
  Carleen

  Duplicate the content of the Post-
  updates
  Why can't that get updated? Does the automatic system even if that's all. It comes up with the error code: 8024402F all the time! All this effect tried but noting seems to be stuck on 10/10/12? Any suggestions please.

  Why is my so slow IE9 at this time?
  It takes forever just to download any web page? I was wondering what I can do?

  Hello
  A solution is pasted below
  It's the second week trebuchee solution on and counts down 20 21 computers fixed 9Windows7 & Vista)

  I had this problem as well and tried many recommendations, but none apparently worked. On the update box on my computer has recently tried update was NEVER.
  So if you have this perhaps it will work for you I tried a certain path with all have the same apparent result with error 8024402F coming.
  It is a such crazy crazy world that we live (murphies law seems to be in control.)
  Do the opposite which is logical
  First define your update affecting NEVER RECEIVE UPDATES, then UNCHECK the two boxes below if they are checked (a topic everyone can update,) and the other to be informed of the available updates. (That one a box Monte are you shore you want to not be notified etc..)
  NOW USING MURPHIES LAW leave all settings for example being NOTHING of WORK SHOULD
  NOW CLICK THE BUTTON UPDATE, SURPRISE SURPRISE, NOW, YOU CAN REFRESH. !!!
  After update, search for new updates after the first batch.
  Then the settings can be set back to normal for example receive updates automatically, check the other two boxes.