No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

Similar Questions

• After reinstall Window Vista 32 bit, I can't move the slider to increase the resolution of the screen, how do I solve this problem

  My Dell Inspiron 530 sudenlly crashed, I could not start it. I called for the support of a group that I paid for. Technicians helped me start the PC, but they could not fix the screen resolution: in the display settings window, the cursor is on the left end of the bar, the low position and could not be moved. The technician finally asked me to save the folders files and reinstall Windows Vista. After the relocation, the screen resolution problem persisted. Technicians then reformat the HD, then reinstall Windows Vista again, the result was the same. We cannot change the resolution. Help, please.

  Hello Selim,
  
  I suggest to update the drivers for graphics cards and drivers from the chipset from the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection
  Troubleshoot monitor and video card
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

• After you have reinstalled Windows XP, I am unable to connect to the internet. Tried to fix the computer with Norton but then decided to re - install.

  I had to reinstall windows xp on my computer.  After that I finally got on it now says it can't find an internet connection.  I have a House on a wired network with a router and modem centeral.  cables and connections are all good, and I was online with Norton tries to fix problems with the computer front of reinstaling windows xp.

  Steve,

  I think that you better install the drivers. I found your other post. Visit the computer manufacturer.
  Cheers! ~

• After having reinstalled Windows 7-64 bit, unable to connect to the internet

  Hi guys,.

  I went to the area of driver HP and installed all updates of drivers for my laptop (HP Pavilion G7 1212eo).

  However still missing:

  -Network controller

  -Ethernet controller

  -PCI

  I read on the forum and I know to help you asked for hardware ID's they are here:

  NETWORK CONTROLLER

  PCI\VEN_168C & DEV_0032 & SUBSYS_1785103C & REV_01

  PCI\VEN_168C & DEV_0032 & SUBSYS_1785103C

  PCI\VEN_168C & DEV_0032 & CC_028000

  PCI\VEN_168C & DEV_0032 & CC_0280

  ETHERNET CONTROLLER

  PCI\VEN_10EC & DEV_8136 & SUBSYS_3568103C & REV_05

  PCI\VEN_10EC & DEV_8136 & SUBSYS_3568103C

  PCI\VEN_10EC & DEV_8136 & CC_020000

  PCI\VEN_10EC & DEV_8136 & CC_0200

  PCI DEVICE

  PCI\VEN_10EC & DEV_5209 & SUBSYS_3568103C & REV_01

  PCI\VEN_10EC & DEV_5209 & SUBSYS_3568103C

  PCI\VEN_10EC & DEV_5209 & CC_FF0000

  PCI\VEN_10EC & DEV_5209 & CC_FF00

  Thanks a lot to all in advance

  Hello:

  Here are links to the drivers you need...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&OS=4063&product=5182561&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100079-1&cc=us&DLC=en&LC=en&OS=4063&product=5182561&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1&cc=us&DLC=en&LC=en&OS=4063&product=5182561&sw_lang=

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• After reinstall, Windows Vista guest is no longer to set "network location" when connecting to a wireless network. How can I do it again?

  Hard drive failure, had to reinstall Windows.  Among other random things that are annoying, I noticed that Vista wonder is no longer for what kind of network, I connect to.  I fear it may default to private even if I connect to a public network.  How can I do ask the question again?

  Hello again Amit,

  Have you tried uninstalling and reinstalling your network adapter?
  See if Windows prompts when connecting to your network after the execution of a reinstallation of the card:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• After reinstalling Windows Vista, the product key does not work

  Hello, I had to reinstall windows vista home Premium x 64 on my laptop. I was wondering why my product key on my laptop is not working and if there was a way to avtivate using a phone.

  Hello

  This can help you:

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• After a virus attack, I am unable to connect to the server from any client computer.

  I have a small net work in my house, and until yesterday, the network works well. MSSE has cleaned up win32 virus attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. Infographic customer request user LRN & passwiord against which I entered the data from the server connection, but it displays the sdame error message. PL help someone who will be widely recognized.

  Thank you best regards &.

  Gandhi Prasad

  original title: connection from the Client to the network problem

  Hello

  Your question (Windows XP) is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public Server on TechNet. Please post your question in the Windows Server Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• XPS M1330 can not find network card after reinstalling Windows Vista

  Hi all

  I'm passing my computer to a member of his family and wanted to give them a new installation, so I used the disc of Windows Vista (32-bit SP1) shipped with the laptop and reinstalled Vista on the computer. Everything worked fine until I wanted to connect to the internet, then Windows tells that there are no available networks. When I chose "Why doesn't windows find all networks" he stated that "this computer doesn't have a wireless network installed and configured card". I put in the Dell driver and Utilities CD that shipped with the computer and installed the drivers which seemed related to networking or communications, but the problem persists. I guess it's some sort of driver problem (as the computer used wireless before the reformat (a few hours ago) and so the device itself seems to work.)

  I would greatly appreciate any help to get this race. :)

  Thank you!

  Hi Chris,

  Please share the system model and the operating system installed on your computer?

  If you are facing problems with the wireless, you can follow the steps below to check if the drivers are listed as installed in the Device Manager:

  • Press 'Windows' + 'R' key on keyboard.
  • Type "devmgmt.msc" into the box run without quotes.
  • In the Device Manager window, expand network adapters and verify if your wireless card is on the list.

  If the wireless driver is not present in the system and is displayed as a network controller in the section other devices with a yellow question mark, you can download the drivers from the link: http://dell.to/QjjZDA -> Enter-> the serial number of your system, select the operating system-> expand the category network to download/install wireless drivers

  I hope this helps. Please respond to the findings.

• Cannot install printers after reinstalling Windows Vista

  Thanks Ajay, your info has reinstalled me, there is one thing that's happened maybe you can help me aggain. After reinstal I find that I can not install, or any of my printers with the printer installation discordant from their web sites. I looked around drives c: and cannot find something that refers to printers or drivers can you help, mrk.

  Hi Rudy,.

  (1) what happens when you try to install the printers?

  (2) that you get the error messages?

  Step 1: Run the fixit available in the link below and check if that makes a difference

  Problems printing and printing errors

  http://support.Microsoft.com/GP/printing_problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem Windows Update after reinstalling Windows Vista

  Hi all. I had a big problem, I get viruses on my computer and a friend who is an expert in computer science, says that I have to reinstall my Windows Vista Home Edition Premium, the virus is impossible to remove. I reinstalled who, install all drivers card mother plaplapla... Can I get the problem. When the computer install updates and restart the computer, just tested something: ' installation updated 1/3 0% "you know, it is allmost allways, but then comes the message as (sorry its Finnish and I translate Finnish to English., but I try):"configuration of updates failed. Updates to repeal. Do not close computer. "And then like 15 minutes and the computer to reinstall and updates are not installed. Even my friend don't know what to do, then, he said, that I should ask here. Sorry on my text, now is 04:15 clock, I tried to fix this several hours. I have reinstalled this about 2-3 weeks ago, first of all, I think it's a small problem, solved itself. Then I start looking for help and finally ask my friend and now I ask the help of your part. I'm sorry, I'm so tired, so I can't say to my hardcore computer, ask more, I have to go to sleep. Thank you.

  Perhaps this may be relevant-

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  When you try to install an update from Windows Update on a computer that is running Windows Vista, you may receive the following message: Configuring updates step 3 of 3. 0% complete
  After you receive this message, the computer returns to the screen that displays the same message. In addition, the update is not installed successfully, and the computer restarts.

  or see: Description of the preparation tool system for Windows Vista update -.
  http://support.Microsoft.com/kb/947821

• Get my data sorted after recovering the pc after reinstalling windows xp recovery disk

  Hello

  I have an advent 3217 running xp sp3 and after the most recent windows update failed I put on by accident and was then trapped in a reboot loop who gave me an error code of c000021a. I tried pressing F8 and try all the options, but nothing worked. So I used my advent recovery disk that came with my pc to perform a RECOVERY of SYSTEM NON-FORMAT that got my pc to the top and run it again, but completely back to basics. I now have a folder in my hard drive called (MY OLD DISK STRUCTURE) which has all the data from my old and while she.

  Is it possible to simply transfer everything back to the new folder of Windows, restart and have everything back to normal or not?

  Need help... anyone?

  Thank you

  Unliklely that might work.

  Find your stuff (under "Online and Settings\" and copy that you go back to your new configuration.)

  Although it is nice they have presented you a non-destructive system restore ("Advent" I guess...)  A repair facility with a real Windows XP installation CD would probably have been less destructive/disruptive.  :-(

• How to recover programs from windows.old after reinstalling windows vista edition Home premium

  I had to reinstall windows - all of my previous programs seem to be in a folder called windows.old, but they won't work here.  How to restore these?  In particular, I would like to recover my old Windows Mail settings and files and also norton antivirus.

  Here is the procedure to retrieve the data from Windows.old: http://support.microsoft.com/kb/932912/.  You can't recover programs from windows.old - which is not possible.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Acer files must be reinstalled after reinstalling windows vista

  I recently reinstalled windows and copied the files from acer on the d drive, so I wouldn't lose them. I need to reinstall acer arcade complete the multimedia suite both the empowering technology-acer but I was unable to do so. What should I do?

  Hello

  You may not copy the Program files to another drive like you "did".

  Programs need to be reinstalled from the original media

  If it's an Acer computer, they must be part of the process to restore Acer

  you don't say how you reinstalled Vista

  as they are Acer programs that are provided by Acer, Acer support

  http://support.Acer.com/us/en/default.aspx

• Windows Vista continues to try to connect to the VirtualProfile in network connections.

  I was helping my brother set up its new Netgear Wireless USB adapter in Windows Vista and kept running into the same problem.  Once the adapter has been installed, Vista would continue to try to connect to a VirtualProfile under network connections which would interfere with the connection of the profile.  I had my brother take the VirtualProfile and then it connected correctly.  However, after each reboot, the connection of VirtualProfile appears every time and we need to start over the process.  A way to remove this VirtualProfile permanently and why what is happening?  Thanks for any input.

  original title: Wireless Virtual Network profile

  Hello Flash4,

  Thank you for choosing Microsoft answers forum for Windows Vista.

  I suggest you go to your network card making and download / install the latest drivers.

  Also I suggest that you check your system for corrupted files. You use the tool (SFC.exe) System File Checker to check and repair corrupt system files. To do this, follow these steps:

  1. open an elevated command prompt.

  2. to do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
   
  3. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Hope this information is useful.

  Thank you.