No noise/driver does not work after BIOS update

Hey, I'm having a problem with my audio drivers. I have what I think is a HP P5RC - motherboard (I'm still not positive, because it was given to me, and I not found any precise identification on it), and I use the onboard sound on this subject. I've had versions of Windows 7 on this computer since the Release Candidate, and at the time I had to manually download the Realtek audio drivers to get the sound to work. I had to do the same thing when I got the full version of 7 Ultimate. After installing Win7, I had various problems. I was able to trace the problem down to the motherboard, but wasn't sure if it was a hardware or BIOS problem. I tried updating the BIOS to Bishop 3.08 since this page and found no big difference, apart from the fact that the sound did not work. I tried redownloading and installing Realtek drivers and restarted, but I still get all the sounds. What is another problem with the material of the motherboard, BIOS update problem or a driver problem?

Thanks in advance!

-AMV_Ph34r

Edit: I should probably note that I built the computer and used the motherboard that was given to me in this document is not an HP computer.

Edit 2: Another note - I have an Asus EAH3450 video card, which has a HDMI port on it. HDMI audio driver has two audio devices in the control panel and Device Manager. However, I do not have a compatible monitor HDMI, so I need the built-in sound card.

Because your video card can also function as a sound card you must go into the BIOS and change your sound option to 'Auto' (which is probably trying to use your card as the audio device video by default) for the on-board sound of motherboards.

If you found my answer helpful please say thanks with a KUDO (click on the star).

Tags: HP HP Desktops

Similar Questions

  • Satellite Pro C850 does not work after Bios Update

    My satellite pro c850 cd does not work after updating the bios of toshiba.

    What should I do?

    Saying: don t work do you mean it does not fuel upward or what do you mean exactly?
    Flash the BIOS correctly?

    Maybe something went wrong during the upgrade, which means that l ROM flashed module isn't properly

    In most cases a special disc of crisis of the BIOS would be required to operate
    Not sure if you can get it repaired by your own
    Check this thread. Maybe this helps:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

    Otherwise you need help of the authorized service provider available in your country.

  • Satellite L750 - Bluetooth does not work after BIOS update

    I am preparing some L750 notebooks for use and accept updates from the Toshiba, which included an upgrade of BIOS v1.70 for v2.00. He appears after this update occurs that Bluetooth no longer works, i.e. try to install Bluetooth Toshiba stack will fail as it is said that the Bluetooth radio is disabled and must be turned on for continue.

    As the L750 (model PSK1WA-0C300R) is not a hardware switch to enable or disable the Bluetooth/Wi-Fi, the only option available (Fn + F8) is unsuccessful. I ran a recovery of factory default installation and Bluetooth still does not - resumption of classes does not restore the BIOS to the previous version. I have 5 of the model and confirmed the update of the BIOS is the cause. Two laptops now have v2.00 and Bluetooth has been tested in the work before the update of the BIOS.

    If Bluetooth is not critical for the environment which I deploy these notebooks, it's an annoyance I want to solve. My questions are: has anyone encounter the same problem and managed to resolve it? Is there a BIOS v1.70 available for download to restore the functionality? Y at - it an update of the BIOS > V2.00 for solve the problem I have? Thank you.

    Hi JasonL750,

    Load default settings after updating the BIOS? Go into the BIOS, press the F9 key to load the default settings of the installation. Also, make sure that Bluetooth is enabled in the BIOS if there is such an option.

    In addition, it would be interesting to know what happens if you use the FN + F8 key combination. Don't you see that he has an option to turn on Bluetooth and if so what happens if you do this?

  • Satellite A500-17 x - micro does not work after BIOS update

    I have a Toshiba Satellite A500-17 x which I have just updated the BIOS to version 2, as recommended by the tempro software. Now with the new update my microphone does not work. Where can I download a copy of the old BIOS?

    ({I used winphlash64 in advanced mode to restore the original backup, it does to the computer, but it just gives the new bios to}) Thank you rich

    Hello

    BIOS cannot be demoted in windows mode.
    Even if you use an older version of BIOS update, you will get an error message saying that the latest BIOS version is already installed. So, forget the downgrade.

    By the way: I put t think the update of the BIOS assigned the microphone.

    Go to control panel of-> sound-> recording tab.
    Here you will see all the available recording devices (micro)

    Activate the microphone it (in this case the people with reduced mobility) and set its default value.

    Where it works: reinstall the audio driver.

  • Satellite L735-103: one key does not work after BIOS update

    Hello

    I got a Sat L735-103, part no: PSK0CE - 00N0OUEP and I download the bios for this pc, toshiba Web site.
    I have updated bios with no problem, but now a realization thatm a key (the key located in the good of "* f ' and 'z') of the keyboard does not work.
    I have a plate with windows and linux, and the result is the same.

    Maybey I need to go back to the old bios, but in the toshiba Web site only have a bios download: (.)

    Hello

    Somehow, I can't believe that this button malfunction has something to do with the new BIOS.
    Have you noticed the anomaly key immediately after the update of the BIOS?
    You have default BIOS? If not, access the BIOS by pressing F2 when starting the laptop.
    Here, you can set default BIOS and then save the changes.

    If this is not enough, I would recommend contacting the Toshiba ASP because the technician must check whether the button is defective. In this case, replace the keyboard. The technician would be able to downgrade the BIOS as well and could check if it of really a BIOS issue.

    To find an authorized Toshiba (ASP) Service Provider anywhere in the world, please visit:
    http://EU.computers.Toshiba-Europe.com--> "Support and downloads"--> "to find an authorized service provider" (down in the menu maintenance & repair).

  • Satellite A300-20 b - Touchpad does not work after BIOS update

    I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

    I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

    Does anyone have the same problem?

    Hey Buddy,

    Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
    Also, try to load the default settings in the BIOS.

    What happens if you connect an external mouse to the laptop? It work?

    I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

  • Satellite A135-S2286 - USB ports does not work after BIOS update

    I recently had the dreaded BIOS password prompt problem. I checked online to the toshiba support site and took the laptop to a toshiba authorized service center and is fixed by getting the updated BIOS updated to 1.60, but after update BIOS, none of my USB ports work.

    When I connect a USB device, a warning from yellow pop up comes up unrecognized USB device. The same USB device works fine on other computers/laptops. I searched online for a solution and found on a lot of people have the same problem, but did not find any fix for this error.

    It will be useful, if someone has a solution for this error.

    Hey Buddy,

    Is there yellow exclamation marks in Device Manager next to USB ports or they appear correctly?

    If you notice a yellow exclamation you must remove the USB port and restart the computer. All USB ports are installed automatically, you do not need an additional driver.

    I hope that it helps :)

  • Satellite L300 - webcam does not work after BIOS update

    I've recently updated the BIOS to 2.2, and the webcam has stopped working. He disappeared, and there is an unknown device in Device Manager in USB bus controller.

    I've tried everything, even with the new Vista OS pure but nothing as there is no webcam I have installed the drivers but not recognised so I would like if I can get the BIOS to 1.5 and fix the webcam. If I can cos I need. Is this possible?
    TNX

    Hello

    I put t think its BIOS problem.
    First the unknown device (webcam) appears in the Device Manager and it means that a device has been recognized by the system and the BIOS.
    The only reason why its listed as unknown devices is: the driver is not installed correctly.

    After update BIOS, you have to put back the BIOS to default. Access BIOS by pressing F2 and in the BIOS, you can use the button to default to F9 and F10 to save the changes.

    After that you should start the machine and need to go to Device Manager.
    Mark the unknown device and delete it from the list (if possible)
    Go to control panel-> software control and check the list of software for webcam software (from chicony). Uninstall this software if its part of the list.

    Now, restart the laptop.
    Clean the operating system using CCleaner and install the correct webcam for Vista software. Note: pay attention to the 32-bit version or 64-bit.

    If the installation fails, try the Toshiba Recovery disk and define the notebook back to factory settings.

    By the way: decommissioning of BIOS is not possible because the old BIOS is not downloadable.

  • Satellite C55-A-16Z - graphics card does not work after BIOS update

    Hello

    I have a portable Satellite C55-A-16Z with windows 8 and a Nvidia geforce 740M graphics card.

    Last week he asked me to update the version of the bios at 1.30.
    The bios update was successful.

    However when I restarted my laptop I started having a BSOD dgxkrnl.sys.
    Correction of the error and restarted for an another BSOD Windows, and after the second solution, I stopped making BSOD.
    But now, I noticed its games running, if not use the dedicated card, but use the 4000 Intel.

    In the settings Nvidia dedicated card is configured to be always on.
    It seems that my card is missing, but it appears in Device Manager.
    I tried to delete, update the drivers and the default factory reset, but nothing helped.

    Also, when I go into Options power the Intel card is listed and when I disable the card intel in the Device Manager it starts to use the graphic viewer for windows.

    How can I get my Nvidia card to work again?
    Any help is appreciated.

    Thanks in advance.

    Hello

    After the BIOS update the BIOS should be set to default settings.
    You can do it in the BIOS.

    In addition, you mentioned that Windows 8 is still installed on your laptop.
    8.1 to win has already been published by Microsoft and I highly recommend that update you the system of 8 to 8.1 Win Win.

    Before you start the upgrade to 8.1 win, you should check and read the instructions step by step for Toshiba: http://www.toshiba.eu/innovation/generic/windows8_1-message/

    I guess that after the Win 8.1, nVidia graphics card upgrade works well also.

    Your comments would be greatly appreciated.

  • HP Pavilion 15-e017tx - button Wireless does not work after bios update

    Hello

    I have the HP Pavilion 15-e017tx for the past 8 months.

    Press f12 to this machine is shared by the key wireless button, which was working fine until there was a BIOS update last week.

    Now I try to turn off the wireless using this button it will not respond (light orange).

    I checked the Device Manager, there seems to be a problem with the driver.

    IF you have knowledge of this problem please let me know.

    Thank you

    Hello:

    The update of the BIOS should affect the driver wireless button.

    I would recommend that you reinstall as the unknown device is probably the one.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123643-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 5389906 & sw_lang =

  • Re: Computer laptop Satellite U does not work after BIOS update

    I was updating my BIOS.

    My computer restarted abruptly, saying: there was a problem and that a check should be performed.
    After reaching 100%, he's stuck. I waited for a while, but eventually it turned off.

    When I rebooted, it stopped working correctly.
    The screen, keyboard and USB ports do not work.

    Can anyone help with this?

    Hello

    Looks like something was wrong during the update of the BIOS.
    In this case the module ROM was flashed properly and therefore your laptop cannot start properly.

    I think the BISO ROM must be flashed again, but this can be done by a Toshiba ASP because guys have had a trad-BIOS version that is necessary to Flash the ROM module

    Good luck

  • Satellite A50 does not work after BIOS update

    Hi all
    I tried to Flash my BIOS through windows such as recommended on my website of the manufacturer of the laptop (Toshiba). I guess that the process was not as after only 2 hours still "don't interrupt" message displayed. I had to force power off of my PC. Now it is not initialized.
    The Laptio is Toshiba SA50-114, series of satellites. Model n - PSA50E

    I tried the suggestions in the following link
    http://askiris.Toshiba.com/ToshibaSu...200%2035586212
    However, it did not work.

    However, I don't have the disk recovery and file/ROM BIOS tool. Have tried to search on the internet, but without any result.

    Can someone help me please
    1. How can I update the BIOS to get my PC to running back.

    2. to turn towards links where I can find the files in the link above.

    Thanks in advance.
    Best regards
    Parag

    > 1. How can I update the BIOS to get my PC to running back.
    Not possible if your ROM BIOS module was bad flashed.
    If you are a lucky man only the ROM module must be flashed again using a special procedure. But this can be done by a service provider authorized in your country.

    > 2. Point me to the links where I can find the files in the link above.
    There is no link! You need to ask to help ASP.

    Good bye

  • Equium A60-173 does not work after bios update

    Computer laptop girls. A lot of windows screen blue/broken files. Who sets. Site Web de Toshiba says 1.8 bios c can stop it again - Web site also announces 1.90 bios. To go with this...

    Tried to Flash the Bios 1.90 which you have to do in the (stupid) windows. Naturally it hangs during the "preparing for the bios update", with only 15% of progress. WAITED a very long time (30-45 minutes) - no progress took place. Had to turn off the machine and had clearly not worked.

    Now the machine will even not respond to the switch. I was expecting a momentary start - but it's like the power switch has been disconnected. Actually attaching the power supply does not even turn on the power light!

    Can a flash failure turn off the machine so much?
    Or would it be another fault (as well!)?

    Thanks for the tips...

    > Not waited a very long time (30-45 minutes) - no progress has occurred. Had to turn off the machine

    Looks like you broke upward from the procedure of updating the BIOS and it's deadly!
    I put t see any other possibility as to contact the ASP in your country for assistance!

    Maybe you are a lucky man and module ROM on the motherboard is not damage and must be flashed only
    Please note that the update of the BIOS is risky! If you use an incorrect BIOS or update wrong procedure can damage the MB

  • Satellite P855 - 10 H does not work after BIOS update

    I bought a new laptop Toshiba Satellite P855 - 10 H recently and there is no problem. Yesterday (August 12, 2012), I saw a warning from center of Toshiba it is has updated dated August 1, 2012, for BIOS and followed all the instructions until you reboot. Laptop not a not restart after you finish all the process successfully.

    Closed and now I can't start. Downloaded the latest bios file in a usb port on the support site, but because it's the exe, I couldn't use it.

    Any suggestions to save my new laptop?

    For me, this looks like screw at the top of the BIOS.
    I put t know whether you will be able to get this working again, but check it please http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395

    Maybe it will help you.
    Be so kind and post comments.

  • brightness key does not work after bios update

    Hello. I have laptop 650 hp, everything has worked until I have updated the bios after this brightness keys don't work. I tried reinstalling the drivers, restored, updated the bios, hd formatted, installed windows and drivers the latest and still nothing. all other keys work fine. checked the buttons, they all work, it's just the brightness function is not working. Thank you.

    the version the older BIOS, now his market not :/

Maybe you are looking for

  • IPhone and FaceTime call between iPad story

    Remove an entry from the call log from an iPhone FaceTime also will remove a synchronized iPad?

  • iPad, storage

    I have a 2 32 GB iPad running iOS 9.2. For the past few weeks I have my store available has reduced greatsly and I get the message "storage is full. I have deleted a large number of applications that I did not use, but shows always only 196 MB and me

  • Switch WiFi on M60 has stopped working

    The WiFi on my Satellite M60 stopped working the other day, and when I looked the WiFi switch on the side, I noticed, it is in the position, but the light is not on. I n t a fall or the laptop, or have, I changed the settings for the WiFi.Any ideas?

  • Qosmio G20 - CD/DVD drive does not burn

    Please can someone help?I rebuilt my qosmio g20 and the thing what it is great except my cd dvd player that plays audio and video but simply will not register. When the folder now, he says no. RECORDER and when I click on check for other readers of a

  • Microsoft Exchange 2010 x10hosting Web site connection

    I have installation Windows SBS 2011 Essentials on my computer, and Microsoft Exchange Server 2010 and try to figure out how to connect my x 10 domain, mckittrick.x10.mx, to Exchange. I'm also trying to figure out how to get the correct DNS records,