No notification of ink - PhotoSmart 7520

Similar Questions

• Photosmart 7520: hp photosmart 7520 yellow ink cartridge will not in (pop out of space)

  I tried to install two different new HP 564 XL yellow ink cartridge in my Photosmart 7520. They arise constantly from their slots. I managed with the magenta cartridge that is similar, but the yolks do not remain in place. What is the solution?

  Hi Rebmark, I did some research and found a troubleshooting page that describes some steps that might solve this problem.
  
  http://support.HP.com/us-en/product/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/document/c02944025

  Step #9 may be the answer you're looking for. When the ink cartridges is not properly connected, it can help try gently bending the cartridge tab try to avoid to bend this tab over a half inch, as it could damage the cartridge.
  
  I hope this helps, but let me know if you're still having problems!

• Photosmart 7520: Use of ink

  FAST ink cartridges - printer printed only a total of 892 pages and went through 6 cartridges black (page 750) and two others.  I have never even printed a photo and it shows empty.   It's ridiculous!  Is anyone else having the same problem?

  Hi @rshughes21,

  Welcome to the HP Forums!

  I noticed that your printer HP Photosmart 7520 use your fast ink. I'm happy to discuss this issue for you!

  Please read carefully this guide, using ink in inkjet printers, as well as this guide, How HP measures inkjet by page.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope that these guides are useful and I thank you for posting!

• Photosmart 7520: Must the Photosmart HP 7520 TWO black ink cartridges (complete and installed) to work?

  Hello

  I read a few threads where people are struggling with the question of black ink with this printer. These threads, it seems clear that HP didn't design this system very well, and I would tend to agree. Even if someone said I could find the cartridge (bowtie) smaller at Staples, I can't find it. Even if I could find it, I don't want to have 2 kinds of ink black to store all the time. And my printer does not print black with only a new XL Black 564 installed. Is there a setting I'm missing in the menu where I can choose the XL cartridge only? The manual is not clear on this, and I think it's something that should be clearly explained.

  My question is simple, and please, one who answers, read my questions and do not provide a generic incomplete response and then put a little check mark 'Resolved' next to this problem. With 3 wires, that I read on this subject, the question NOT yet resolved or fully explained.

  The printer may be used and black printing using only the right XL cartridge or do I need to have both complete and installed black cartridges to work? And a follow-up, the left cartridge (bowtie) should stay there so he works or can I remove it and keep filling the cartridge XL to go forward with the empty to the left slot. If you work for HP and you are reading this and 100% do not know the answer... call someone at HP who has designed this printer and know please let me know.

  Thank you!

  The printer requires all cartridges having ink - they don't need to be full, but they all need to be installed and have adequate ink.  The thick black cartridge is pigmented black, mainly used for text and graphics on paper.  Thinner bowtie is the photo cartridge.  It contains dye black ink based and is designed for printing on photo paper.  Black pigmented ink is not compatible with the glossy photo media, black of the photo will be used in cases where the photo paper is selected in the driver or detected automatically.

  The Photosmart 7520 has separated from the inks and printheads, with plumbing to connect.  All inks must be present to prevent air intake in the plumbing or the print heads and keep the printheads from clogging.  See here for more information on using ink.

• HP Photosmart 7520 will be black printing ink ot

  My photosmart 7520 quit printing black in the middle of a print job.   All cartridges except black needed changed.  I did this and no black printing.  Changed the black cartridge just in case.  No black printing.  I cleaned the connections of the electrode, cleaned the vent system, clean the cartridges twice, unplugged and then replugged it printer.  I need help!

  Solved my problem!

  After more research, from the homepage, I chose 'tools', then clean the print head (due do it twice) and then aligned on the printer and we are ready to go!

• Photosmart 7520 will not print on color construction paper.

  My Photosmart 7520 print text on color construction paper.  It feeds through the status bar, but does not print.

  Hey @JanMO,

  Welcome to the Forums of HP Support!
  
  If you have a 7520 Photosmart all-in-one that doesn't seem to not want to print on color construction paper? Because the product is to feed the paper in the paper tray but isn't actually put ink on the page is does not seem to be a problem with the book itself and not filling not the management of specifications that your printer takes in charge for a type of paper.

  According to the specifications of 7520 Photosmart it can handle:

  • Types of media supported: Paper (brochure, inkjet, ordinary), photo paper, envelopes, labels, cards (greeting), transparent
  • Supported media formats: Letter, legal, 4 x 6, 5 x 7 in., 8 x 10, no. 10 envelopes
  • Recommended weight: 16-80 lbs.

  Plug Photosmart e-all-in-one printer 7520

  You know the exact weight of the construction paper?

  Your printer will print on other media, such as plain white paper or photo paper glossy with no problems?

  You could try to browse the next document in troubleshooting print quality, but please note that if your paper is not listed in the support media types, sizes or requirements of weight that you can do more harm to your printer.

  The problems of print quality for the e-all-in-one printer series HP Photosmart 7520

  Please let me know what you find on your construction paper specifications and if none of these steps helped to solve your problem. Good luck!

• New HP Photosmart 7520 e-all-in-one printer from the box, removed the tape and cartridge access

  

  I have a new HP Photosmart 7520 e-all-in-one printer just out the box. I removed the tape and cartridge access door does not open more than 40 degrees. The figure represents about 80 degrees. I'm afraid to force it. I can't put new cartridges in the printer. Very frustrated trying to get help. It doesn't seem to be a phone number or Web site for direct assistance. HP has really gone down hill. Help!

  Hello

  Mine is about 45 degrees, sufficient space to install the ink cartridges.

  Kind regards.

• Photosmart 7520: 7520 cartridge HP error

  I was gifted a HP Photosmart 7520. It doesn't have a black photo cartridge. I get an error message that said, "one or more of your cartridges appear to be missing or defective" my question is, should I black photo cartridge so the printer at work?

  Hi @Jackpine2,

  Welcome to the Forums of HP Support! I see your HP Photosmart 7520 gives you a cartridge error "one or more of your cartridges appear to be missing or damaged." You have no Photo black cartridge inserted.

  The answer to your question is Yes, should not have all of the cartridges installed in order to continue printing. The reason is that ink system draws from all cartridges, for the maintenance of the tasks etc.. To get a better understand click on the link below:

  Using ink in inkjet printers.

  Please go ahead and start troubleshooting here: ink cartridge problem: a "ink cartridge problem,'"Not compatible ink cartridge"or"Ink cartridge failed"Message appears on the printer control panel "

  If you still receive the error message after troubleshooting, try to replace the photo black cartridge.

  Thank you

• Photosmart Photosmart 7520 7520:364 cartridge

  I recently inherited a Photosmart HP 7520.  I was really happy when I got it, easily implemented and he was soon facing up and running on my home network.  Then the black cartridge ran out.

  I looked inside the printer and saw a sticker that says product no. CZ045B and 364 of HP ink cartridge.  I went online and ordered a 364 XL Black thought that would be my best option.  However, after receiving, he does not.  Stupidly, I put this to a poor experience and ordered a series of 364.  However, that does not fit either despite the fact that the packaging on both cartridges says that they are suitable for a Photosmart 7520!

  After the forum, it seems that there are two types of 364 with a bow on them and those with a Pentagon.  However, I am a loser on how to decipher than the one I buy online or in my local staples (which were at a loss!).  Is it a kind of game of pot odds that HP invented rather like maps where you can buy 10 cartridges before finding the gold that actually fits?

  I would like to know if there is a reasonable as having already dropped 20 pounds on useless cartridges entirely, I see that I would have been better to buy a new printer of someone else...

  Thank you.

  Hello

  Your printer has 2 black ink cartridges (Yes TWO)

  close a callee ink cartridge Photo that has a symbol of a camera on him.

  (b) the biggest known black ink cartridge,

  Black cartridges and Photo are not interchangeable. Cartridges photo cannot substitute for black cartridges.

  Update: CZ045B is for the printer itself, each color has a different code

  http://support.HP.com/us-en/product/HP-364-ink-cartridges/4237217/document/c01588837/

  Kind regards.

• Photosmart 7520: How to remove HP photosmart 7520

  Had a Photosmart 7520.  A wrong.  Replaced by officejet pro 8710.  Thought I deleted old printer the right feel.  Now whenever I connect to my home office, I have just upgraded to Windows 10, '7', it says: "cannot find C:\Program HP Photosmart HP 7520 Series\bin\HPStatusBL.dll.  Now, how to get rid of the error message for a deleted printer.  8710 new installed & works very well.  Thank you.

  Hello
  From file Exploer type %appdata%\Microsoft\Windows\Start Menu\Programs\Startup in the address bar and press ENTER.
  Delete the shortcut to monitor alerts for Non-Existing printer ink and the error should appear is no longer.
  
  Kind regards
  Shlomi

• Photosmart 7520: Preparation of inactivity

  We have a Photosmart 7520 in a secondary residence that leave us vacant for three months at a time.  How can we better prepare the printer for these periods of inactivity?  In particular, how better ink cartridges to preserve?  Is simply off - by switch, AC - sufficient?

  Hello

  The following article article can help:

  http://www.inksell.com/Tip-safelystoringprinters.html

  and our friend Bob here:

  http://www.printerforums.NET/store-printer-t4849.html

  Kind regards.

• HP Photosmart 7520:7520

  Replaced my black ink text and got a message error "is missing or defective print head. The print head seems to be missing, not detected, or incorrectly installed. "She will not have the menu on the printer, to come. I took the cartridge and reinserted them but no love, error message keeps showing up without allowing me to access the printer menu. I have unplugged the printer from the power outlet and reconnected but again not of love. I hooked up the printer with a cable of the USP, but always the same without the menu on the printer error message appears.

  When I run the box software tools HP from my laptop, it is impossible to connect to the printer, the without wire became turned off, I have always printed on my laptop using the wireless but now it will turn is no longer or it will connect.

  Using the USP, it can read the estimated ink levels, which do appear correctly, the new black cartridge as full level, the news of "Health" of the print head are missing, when you check the peripheral Services receive ' Mission of printhead failure.

  What can I do? I have had this printer for a year with no problems until now. I am also unable to locate an HP service provider in my area - Chula Vista, Ca 91911

  Kenn

  Welcome to the HP community @KennHopkins,

  I came across your post about the problems of print head and of the ink system and wanted to answer you. My best advice would be to try all the steps in the link below for this type of problem, see if you can resolve the failure of the print head. If the problem persists, contact HP then to discuss a replacement printer or trade with them as an option.

  Poster 'missing or doesn't have a printhead' for HP Photosmart 7520 e - all-in - One Printer Series

  Testify of my answer by hitting the thumbs below and press the button "Accept as Solution" if I helped you reach a solution!

  I hope this helps you!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Photosmart 7520: Printer Wizard does not work on Windows 10

  My PC has recently upgraded Windows 10.  I am now having a problem with the Printer Wizard.

  Previously, I had the status display, the ink levels, scan document, check printer heads, etc.

  Now all I get is a printer configuration screen that has 3 options

  -connect a new printer,

  -convert a USB printer wireless, and

  -Add new software.

  How can I get the correct printer assistant screen to run?

  Thank you.

  Hi @AJA3,

  Thanks for joining the Forums of HP Support for a solution to your problem of HP printer Assistant.

  I understand that you use a HP Photosmart 7520 e-all-in-one printer with a computer who has recently upgraded Windows 10 and now, when you click on the printer icon to open the HP printer Assistant you get the "connect a new printer"window. " I would like to help with that.

  It is not that the HP printer Assistant does not work, but probably the printer probable network needs to be reinstalled.

  I would like to start by uninstalling all software that was installed before the upgrade to Windows 10 relating to printers. Here is a support document which can help needed - uninstalling the software of the printer (Windows).

  If you get prompted to restart the computer when uninstalling, go ahead and do the restart. If this isn't the case, restart the computer after the uninstall is complete.

  Once the computer is ready, try to use the HP printer installation wizard for installation. This tool will find the most recent version of the printer software and installation help.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Photosmart 7520 printing in black and white?

  I have a photosmart 7520. I want to print a black and white text form, but since there is no ink in the photo to the left cartridge, I can't print anything. Is it not possible to print only black and white stuff, whith this printer?

  Thank you

  Thomas

  Hi Thomas (Jeeeez).

  This is great news, you are the very welcome

  I was wondering if you would be able to score my post as an acceptable Solution? In this way if others have a similar problem, the job is easier to find.

  Anyway, thank you for your time and patience, have a beautiful your weekend!

• Photosmart HP 7520: photosmart 7520 printer all-in-one fell my SSID wireless

  My photosmart 7520 worked well until a few days ago.  It has stopped printing.  Wireless test report I am not connected.  I tried the wizard wireless set up to get reconnected but my wireless router number has disappeared from the list.  I typed it in manually but it won't.   Anyone know how I can print again?

  Hi @msibrox,

  Welcome to the HP Forums!

  I noticed that your HP Photosmart 7520 will not connect wireless to your Windows 7 computer. I'm happy to discuss this issue for you!

  I would say to begin with a hard reset, by going to this post, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  I would also like to cycle power to the router. (With the router, unplug the power cable, wait 30 seconds and plug it back.) Wait for the lights to come back and try to connect to the printer again. Installation of the wireless printer.

  If it still does not work, print a Network Setup page. Print a Network Configuration Page, let me know if something falls down, and the number of disconnects.

  I hope hear from you soon!

  "Please click the Thumbs up icon below to thank me for having responded."