no option in advanced propities of network sharing.

Hello I am trying to connect my xbox 360 to my pc using an ethernet cable, when I go into my network connections > that represents my internet > propities > advanced, it is not an option for the network share. It just says: windows firewall and I tried to disable the firewall.

Hello

Regular participation is a problem file/printer sharing configuration can be done by right-clicking on the folder/drive/printer when you use Windows Explorer

If you try to share the interent with X - Box, you will need to use ICS.

See here http://support.microsoft.com/kb/978618

Jack-MVP Windows Networking. WWW.EZLAN.NET

Tags: Windows

Similar Questions

  • network shared variable treatment

    Hello everyone,

    Someone tried to link data from a network shared Variable to the query (running in a smartphone or Tablet) made with "treatment"? I know on the dashboard of data but I would like to know if West someone working with these two technologies. Thanks in advance for your answers, comments, suggestions, etc.

    Hello Bene

    Apart from the dashboard of data there are other technologies that you can use for mobiel applications in LabVIEW

    If you already use a shared Variable, then the easier and faster way to connect your mobile device and the PC on the same network and then simply use DataDashboard to read from your published variable.

    You can also create your own thin clients or http Web pages and link to labview, send sms, share a front panel to distance between computers

    Here is a link where you can read all about it

    Cheers and good luck

  • Trying to turn on network sharing and discovery, I get the message 'the specified service does not exist as an installed service' I am running AVG internet security 2013

    When I try to change the networking of sharing and discovery, I get the above message.  I don't quite know what to try to fix the problem. Any thoughts would be helpful. Thanks in advance.

    Hello MarkPogue,

    Thank you for the question!

    I'm sorry to know that have problems you with the network sharing and discovery. "As I understand it, you get an error message" the specified service does not exist as an installed service ' trying to turn on network discovery.

    Make the SFC (System File Checker) scan and see if the problem occurs.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Answer to us if you are having problems with the network discovery or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

    Good day!

    Hope this information helps.

  • I am connected to the internet, but my network sharing Center proclaims that I'm not.

    The paradox connected but not connected

    I am connected to the internet, but my network sharing Center proclaims that I'm not. Because some of my programs believe later, they refuse to patch. Also, I used the antivirals ware, scans, System Configuration and deleted and later restored the wireless network.

    Any help would be greatly appreciated. Thanks in advance.

    Hello

    1 reboot as often, this allows the refresh icon and also stops a few things of
    interfere with the slot troubleshooting process.

    Do a 1 Restore Point then you can go back to where you were if necessary.

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    ------------------------------------------------------

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Do
    It will be the same for network (NIC) card - then right click on the devices and UNINSTALL - Reboot -
    update the driver stacks.

    Now go look at the site of the manufacturer of the system for the updated drivers.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
    updated drivers.

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -----------------------------

    Allow you to reset your TCP/IP stack just to make sure:

    Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN

    Enter these one at a time (or copy and paste) and press ENTER after each

    ipconfig/flushdns

    nbtstat-r

    nbtstat - RR

    netsh int Reinitialis

    netsh int ip reset

    netsh winsock reset

    Reset

    ----------------------------------

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
    lower left click on merge or delete network locations - REMOVE all instances of your network (and the
    others you don't use anymore) - REBOOT.

    ---------------------------------
    Other tips:

    If the use of a wired cable - Control Panel - device - network adapter - (NIC) Manager - double
    Click Advanced settings and set the "speed & Duplex" 10 Mbps full duplex and then try 1/2
    double-sided. Be sure to APPLY / OK. Maybe some help here: (don't forget the answer is)
    complicated because there's probably more than one single thing, the origin of the problem)

    Others.

    http://www.pctipstricks.com/tips-for-troubleshooting-network-cable-unplugged-error-for-wired-Microsoft-platform-PCs/

    http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/

    http://www.annoyances.org/exec/Forum/WinXP/1109372091

    There are many causes, one of which is the small monitor pays attention to the evil network device.
    You can try to disable any other network such as WiFi device and reboot to see if that has an effect.

    Still a problem of equipment such as a loose network card that is not properly attached to the computer can
    cause this.

    http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

    I hope this helps and happy holidays!

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Windows Media Player Network Sharing Service or a service it depends on failed to start. (Windows 8)

    A problem occurred recently in which I can't stream my music from WMP with other devices in the home as my Xbox 360 group. It has always worked well and this is the first time, it's happened. When I tried to connect my PC to the Xbox, my PC has appeared on the list, but when it connects a reason any. I then went to my PC to make sure that everything was in order. I open Windows Media Player and watched the streaming options. Everything was going in order, except that the media from my computer was turned on not a reason any. I clicked on ' turn streaming media on "and it led me to the page of the control panel option. It reads simply "media streaming is not enabled" (as well as usual and precautions which not). I clicked on the button below "streaming media turn on. This is where my problem appears. Loads of my computer and nothing happens. I tried a few times and he told me then that the title of the question says. He then invites you to me to go to the service administrator tools. So I did and I went through the list of services until I found than the one titled "Windows Media Player Network Sharing Service. He was not running although it should be automatically. I clicked on it and press start and it says "Windows cannot start the service on Local computer" with error 1068: the dependency service or group could start.

    If anyone has a solution I would be very happy. I tried to be as complete as I could in the description.

    I had this problem as well, with 8.1 widows.  On the Dependencies tab, I had two components, the HTTP Service and Windows Search. I found that Windows Search has been disabled.  I don't know how it's spent, but allowing him to corrects the problem.

  • Y at - it an instruction step by step to set my network/sharing

    Hello

    Y at - it an instruction step by step to set my network/sharing

    I have a desktop Imac 21.5 on the LAN and a macbook 13 "pro on wifi

    I'm using DHCP

    El Capitan osx

    I can see every computer in the finder and can access

    However I just can't in files

    Tony

    There are a few things to put in place.

    You access the Macbook to the iMac or put in place for the Macbook can access the iMac? Or both?

    Her are a few step by step to try.

    How to connect with the file sharing on your Mac - Apple Support

    http://computers.tutsplus.com/tutorials/a-beginners-guide-to-OS-x-file-sharing--Mac-53206

  • Results of Toshiba Connectivity Doctor or Vista network & sharing Center

    I bought a 802.11n router to allow additional coverage of my Toshiba with a 802.11n Wireless WiFi Link 4965AGN give me and I never seemed to get the extra than I expected! I tried etc. Since a few weeks I got the laptop, and was beginning to lose patience and hope of ever is it solved, however I just noticed something that only confused me even further!

    I always use the connection to a network/network and sharing centre within Vista OS under my control, "connection status" of my networks etc. & it has never showed that the network which should give me ' isn't a 'g '! But earlier I found and used the Toshiba connectivity doctor, and I found it is sometimes shows the connection as a 'n', but still the Vista "connect to a network & Vista network and sharing Center" show the same broadcasting as a 'g '!

    What should I take as the most accurate, I have little additional coverage when I used to have a portable 'g' and a router 'g', but perhaps remotely an additional 2 meters which, depending on how wonderfully better is the "n" does not seem to live up to the expectation!

    I based my results of the exact coverage, physician connectivity Toshiba or Vista network sharing Center, they can be opened at the same time and showing the different results? I do not understand why they say different things? Crikey Ca? s driving me crazy!

    Hi friend

    already tried INTEL drivers? Theres a special broadcast of the site just about your wireless card, so if you please, visit this site and download the drivers from here:

    http://support.Intel.com/support/wireless/WLAN/4965AGN/

    Maybe it s just a driver related problem. And another suggestion: use a single program to connect to wireless networks. Maybe they cause some internal conflicts in the system which turns off the feature n.

    Oh, and Don t forget to check the properties of the device manager/network on some technical parameters. Perhaps, it must be explicitly enabled, also on your router.

    Welcome them

  • Could not get the option to 'Create a wireless network' in configuration

    Hi guys

    I am trying to run myRio-1900 as an access point, but I don't have the ability to "Create a wireless network" in its configuration. I installed NOR-RIO 13.1. What could I have done wrong? Have installed something wrong?

    Hey John,

    Have you gone through the steps in this document of reference and do not see the option to set up a network without wire anywhere OR Max or in the web interface?

    http://zone.NI.com/reference/en-XX/help/373925B-01/myriohelp/myrio_creating_wireless_networks/

    Also, have you installed the toolkit myRIO, shown here?

    http://www.NI.com/download/LabVIEW-Myrio-Toolkit-2015/5518/en/

  • Are published network shared variable write &amp; read Atomic actions

    Hello

    I have a very basic question about shered (published network) variable.

    I think I know the answer already, but since I couldn't find in my documentation, I thought that it is more prudent to request...

    Are reading and writing on a shared variable of stocks Atomic?

    To be more precise: on my target real time I create an array with data (each element being the configuration item or a cluster containing name, value, and type) and when the table is finished I am this store in a published network shared variable.

    On my host (Windows), I'm voting (in a loop) until the table contains at least 1 item, when this is true I'm parsing all the elements in the table.

    Is there a chance that, reading of the shared variable, the table contains a subset of the original painting on RT target (i.e. the action of reading takes place while writing is still ongoing).

    Or is the action of reading delayed until the write is completed? (i.e. both write and read actions are atomic even over the network)

    I think the latter is true but not could find no evidence in the documentation.

    Kind regards

    SoC

    Hello Rob,

    Yes, you can access the entire value, data type - you use both. For the table data type, the integer value is actually the full picture. So, Yes, you can see reading and writing as Atomic actions.

    But, on the other hand, you can lose data if the RT system rewrites the variable before the host had the time to read. To avoid this, you can enable buffering for the variable. See the following links for more information:

    http://www.NI.com/white-paper/4679/en

    http://zone.NI.com/reference/en-XX/help/371361H-01/lvconcepts/buffering_data/

    Finally, you can also activate a FIFO RT on your target RT if you need to send data through the variable in a deterministic section of the RT. See also, more information:

    http://zone.NI.com/reference/en-XX/help/370622H-01/lvrtconcepts/rt_projectvariable/

  • Passing an array via one RT FIFO network shared Variable, Code error-1950679034

    This should be simple.  I'm just passing through a table via a single RT FIFO network shared Variable element.  And yet I get nothing.  How could - not working?  What is this error?

    Well... it must have been some sort of thing calendar because adding an expectation of 100 ms fixed it straight up.

    Now don't feel ridiculous

  • Photosmart Premium C410b - Scans - how to disable autocropping? No option in advanced settings.

    Photosmart Premium C410b - Scans - how to disable autocropping?  No option in advanced settings.  Thank you

    Hello

    The HP solution Center, click on the settings icon.

    Under the scanning settings, click on photo scanning settings.

    Click Manage shortcuts Scan

    Select the Scan used shortcut (e.g., file photo)

    Click on Advanced settings of the image in the right pane.

    The lower part of the window, select scanning of the whole scanning window and click OK.

    Click on save shortcuts, and provide the name of the shortcut.

    Now, to use the newly created shortcut that will not crop the scanned area.

    Kind regards

    Shlomi

  • Acer aspire e17 options to advance bios where is it how do I unlock it

    Howdy all

    Just bought myself the e17 aspire and I use linux and program for android uses android studio that reqquires me to use VT enabled for their emulator.

    So I did a kvm - ok and here this is not enabled in the bios, so no problem, I went into the bios and NO ADVANCED OPTIONS either.

    First question is why?

    I guess for least developed it wise, but for us who need only option there should be a choice to allow him so we can use it and for all those who need to use a virtual machine, it wouldn't work without it.

    So the great qustion here is how the hell show this thing so I can't see the advance options menu in the bios.

    Even if there is a hex code which must be turned on (1) which is it?

    I can use ghex to this if necessary, but I absolutely need sound for my work and it's the first bios I've seen without an advance in option for the VT to activate it.

    So this slows me down now in my work because of this.

    I have to get this permit.

    Any help would be appreciated, and thanks in advance and please remember I do not use windows at all, it lasted about 8 hours before I almost nut with tons of shortcuts on the hull and normal user interface was not much better either, I use linux.

    I just need to activate the hidden pages in the bios the option should be there.

    Sam

    lol as usual when it comes to linux no response from the support teams unless there for the weekend.

    in all cases I've seen there is a updated bios update ZQN_107 so I installed and updated the bios with freeDOS (linux only here) and there are still no advance or (still hidden) power option but at least it seems that you have the default VT so I can use the KVM for android studio so I guess I can mark it as RESOLVED now.

    Just thought I would update this for others who need to use VT or KVM

    I still want the options in advance and be able to be UNMASKED if possible.

    Sam

  • Windows Media Player Network Sharing Service missing in Windows Vista

    I use Vista and WMP11.  I have all the Vista and WMP11 installed updates.  I'm trying to set up the sharing and noticed that the Windows Media Player Network Sharing Service is totally absent from Services.  I ran the Vista System File Checker and it did not help.  How do we install this service?

    Hello
     
     
    1. have you made changes on the computer recently?
     
    I recommend you do a system restore to the previous times and check if that helps. I have listed a few articles that explain the system restore in Windows 7.
    System Restore: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows Media Player network sharing problems

    Hello

    I operate a laptop Gateway using Windows 7. In recent weeks, I started receiving messages saying "Windows Media Player Network Sharing Configuration Application has stopped working and needs to be closed." After this, another message appears asking if I want to report the problem to Windows. This happens about once every 5 minutes or so, even when the Media Player does not work. If anyone has experienced this problem and is there a way to fix or disable this feature of sharing media player? Thank you for your time.

    Patrick Taylor

    Hello patrick1210,

    Sorry for the delay in responding to your message.

    In the views of others with the same question, it seems that maybe that's a problem with the file mf.dll.
    Some have been able to replace the file.

    A few suggestions:
    (1) run SFC to see if you have corrupted system files.
    Click Start
    Type: CMD, according to the results, right-click CMD
    Click on "Run as Administrator"
    At the command prompt, type: sfc/scannow

    This will check for any violation of the integrity and repair any damaged operating system files.

    Reboot your system.

    (2) register the dll from the command prompt. Go to a command prompt, right click and select 'run as administrator '.
    Regsvr32.exe mf.dll

    If please reply back and let us know if this helps with your question.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Media Player network sharing service uses 40% of my processor

    Hello

    I bought the HP P6270IN with win 7. everything is perfect, but... I have a problem... media player network sharing service uses 40% of my processor . I do not want to use WMP library. Please advice how to solve this problem.

    Parth

    Hi Parth,

    Welcome to the Microsoft Answers site!

    You use the Windows Media Player network sharing feature?

    If you use this service while the service is required to operate to check computers or network devices with which you share your music. This service also index/updates of the library that is shared.

    If you do not use this service and still is using the CPU you can change the type of start up manual (which is to be launched by the user).

    To disable the service temporarily

    1. opening the Services Control Panel, or type services.msc into the start menu search/run box.

    2. double-click on Windows Media Player Network Sharing Service, and then change the service to Manualstartup.

    This has now disabled temporarily the service unless you manually start the service. You can restart the computer and check if the service has been stopped and the CPU usage was down.

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Problems with the photos in El Capitan-cant app drag in other applications and can not find the photos when using Word

    I feel very disappointed with the new iMac (27 inch high range) I bought specifically so that I can work quickly with video editing - BUT who currently my old iMac with Snow Leopard on my desk and still use it to create documents in Word, etc, among

  • Portege Z930-12J - WiDi updated to version 3.5 and greater

    Hi, I have to update WiDi in front of my computer to 3.5 or more because it is necessary to establish the connection with the smart TV. He needs to also update the graphics drivers, but none of these drivers are available via TEMPRO. When I try to in

  • kusb 488 and LABVIEW

    Can someone tell me how to connect with an instrument using the KUSB - 488 A converter USB to GPIB and LABVIEW?My question is that if we have equipped a GPIB card on computer LABVIEW to recognize and display the address of cards... When I connect the

  • BlackBerry Smartphones bedside mode

    Hi, does anyone know if the private has a bedside mode? Also, what about a regular mode of privacy / bedside too? Thank you.

  • ObjectListField and photo

    I used the ObjectListfield, now I want to insert a picture in each field, I found the DrawListrow function but I don't know how to use? PLEASE help me is very urgent