No OS found error and no windows xp CD

Hey I have a windows xp laptop and it was going well until this webpage showed by saying it is scanning for virusis I turned off my computer now and I turned it on and it said not "found of opperating system" and I don't have my windows cd im really stuck.

First, access the system bios and make sure that your hard drive is detected and is set as the boot device. If these settings are correct, proceed below.

Using a work computer to follow instructions on the link below to create a drive of the Windows Xp Recovery Console. Once the disk has been created, follow the instructions below.

http://www.repairbotsonline.com/T109-how-to-create-a-bootable-Windows-XP-Recovery-Console-disc
 
1. Insert the CD from Recovery Console Windows XP in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
  
2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
  
3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console. Usually C:\Windows and you must type the number 1 > press enter
  
4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
  
5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
  
6. at the end of the output of scan type > press ENTER.
  
7 restart your computer in safe mode with network.

8. click on the link below and download Malarwarebytes. Update of the scan, then make a quick scan remove anything found.

Malwarebytes.org

How to use Malwarebytes

Tags: Windows

Similar Questions

  • ATI error and no windows - Satellite Pro A60

    Hello

    When I start my computer, I get a blue error screen c0000415
    A quick google reveals that this is one of these: http://support.microsoft.com/kb/832324

    "So what are you bothering? I hear you cry - the problem I have is, in getting this error of the other (also the ATI card based) I stuck my red disc in and erased everything - including the windows... and CFLA error occurs before windows installs and SafeMode (-that worked perfectly before) does not work because windows is not installed!

    Oh the fun.

    "I think it's a hardware error" - Yes so don't I... However, before the reinstall and get it back, I could work to the computer in safe mode and videos played very well with the resolution and full color. Am I missing the point if I think a video work is an indicator of a working video card?

    I admit that I'm perplexed indeed. I'll try to dig up an old Windows 98 drive, but I don't know how much this will help, because the only copy of XP I have is on the recovery disk... [Return to step 1]

    Any suggestions much appreciated - thanks in advance...

    [it's a satellite pro A60 w / 256 +?] RAM, processor celeron 2.8 Ghz, ATI Mobility Radeon 7000 etc...]

    Hello

    As suggested in document of Microsoft this problem can occur if an ATI Radeon 7200 graphics card has been installed on your computer and the driver that is supplied with this adapter may not work correctly with Windows XP.
    The installation of SP2 should help.

    This statement of Ms. says it all! It of not a hardware problem but it is a compatibility issue with Windows XP (without SP2) and the driver radeon ATI 7200.

    You should try to get an original CD of Windows XP with or without SP2.
    The software callednLiteallows you to create a Windows clean boot CD and add the patches MS and service packs for this CD.

    Then, you can try to boot this CD and after installing the OS, you need to update or change the graphics driver!

  • How can I fix the run-time error '75': path/file access error and have Windows 7

    I am trying to open a program DicomWorks and get the above error. I see only solutions for Vista users...

    Hello

    Did you change your computer?

    I suggest you to run the program as administrator.

    a. Locate the program icon or a shortcut in Windows Explorer.

    b. right-click on the program icon or shortcut and then click Run as administrator.

    c. when the UAC message is displayed, do one of the following:

    a. if logged in as a standard user, or if UAC is configured to always require credentials, enter the appropriate administrative credentials, and then click OK.

    b. If you logged in as an administrator and UAC is not configured to always require credentials, click Yes to start the application.

  • results of installation in the errors and continuous windows Messenger live failure. It seems to stop when I uninstall just messenger.

    I don't have great computer knowledge and do not understand why keep errors occurring.

    Submit all Live and Hotmail queries on the forum right here:

    Windows Live Solution Center
    http://windowslivehelp.com/

  • HTTP 404 not found error and picking target URL is different

    Hi all

    2 days before I was running the same project of Jdeveloper but suddenly is error HTTP 404 not found and in Server embedded in Jdeveloper messages log

    http://Rajesh-PC:8988/OA_HTML/runregion.jsp instead of IP addresses to display the custom of the OFA, I am running of Jdeveloper and get

    The Web page could not be found

    The most likely causes:

    • There could be a typing error in the address.
    • If you clicked on a link, it can be updated.

    What you can try:

    Retype the address.
    Return to the previous page.
    Go toand search for the information you want.
    More informationMore information

    This error (HTTP 404 Not Found) means that Internet Explorer was able to connect to the website, but the page you wanted was not found. It is possible that the Web page is temporarily unavailable. In addition, the site could have changed or removed from the Web page.

    For more information about HTTP errors, see Help.

    [Departure OC4J uses the following ports: HTTP = 8988, RMI = 23891, JMS = 9227]

    D:\OAF\jdevhome\jdev\system\oracle. J2EE.10.1.3.41.57\embedded-oc4j\config >

    D:\OAF\jdevbin\jdk\bin\javaw.exe-hotspot - classpath D:\OAF\jdevbin\j2ee\home\oc4j.jar;D:\OAF\jdevbin\jdev\lib\jdev-oc4j-embedded.jar-DFND_JDBC_STMT_CACHE_SIZE = 200 - DCACHENODBINIT = true - DRUN_FROM_JDEV = true - mx256m - XX: MaxPermSize = 256M - Xverify: none - DcheckForUpdates = adminClientOnly - Doracle.application.environment = development - Doracle.j2ee.dont.use.memory.archive = true - Doracle.j2ee.http.socket.timeout = 500 - Doc4j.jms.usePersistenceLockFiles = false oracle.oc4j.loader.boot.BootStrap - config D:\OAF\jdevhome\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\config\server.xml

    [waiting for the server to complete its initialization...]

    Journal of the 24 August 2015 com.evermind.server.jms.JMSMessages 03:58:17

    INFO: JMSServer []: Server OC4J JMS recovery of transactions (commit 0) (0 rollback) (prepared 0).

    Journal of the 24 August 2015 com.evermind.server.jms.JMSMessages 03:58:17

    INFO: JMSServer []: Server OC4J JMS recovering local transactions queue [jms/Oc4jJmsExceptionQueue].

    WARNING: D:\OAF\jdevbin\jdev\appslibrt\xml.jar source Code (< draws > in D:/OAF/jdevhome/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/application.xml) has the same filename, but is not identical to the /D:/OAF/jdevbin/lib/xml.jar (< source code > (ignore obvious Class-Path) in META-INF/boot.xml to D:\OAF\jdevbin\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be hidden because it is already visible in the search path for the default.root:0.0.0 charger.

    WARNING: D:\OAF\jdevbin\jdev\appslibrt\jazn.jar source Code (< draws > in D:/OAF/jdevhome/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/application.xml) has the same filename, but is not identical to the /D:/OAF/jdevbin/j2ee/home/jazn.jar (< source code > in META-INF/boot.xml to D:\OAF\jdevbin\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be hidden because it is already visible in the search path for the default.root:0.0.0 charger.

    WARNING: Source-Code D:\OAF\jdevbin\jdev\appslibrt\jazncore.jar (from manifesto of D:/OAF/jdevbin/jdev/appslibrt/jazn.jar) has the same filename, but is not identical to the /D:/OAF/jdevbin/j2ee/home/jazncore.jar (< source code > in META-INF/boot.xml to D:\OAF\jdevbin\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be hidden because it is already visible in the search path for the default.root:0.0.0 charger.

    WARNING: Source-Code D:\OAF\jdevhome\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\applications\datatags\webapp\WEB-INF\lib\uix2.jar (from WEB-INF/lib/directory in D:\OAF\jdevhome\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\applications\datatags\webapp\WEB-INF\lib) has the same filename, but is not identical to /D:/OAF/jdevbin/jdev/appslibrt/uix2.jar (< draws > in D:/OAF/jdevhome/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/application.xml). If it contains different versions of the same classes, it will be hidden because it is already visible in the search path for the datatags.web.webapp:0.0.0 charger.

    Ready message received from Oc4jNotifier.

    Incorporated the OC4J startup time: 30114 ms.

    URL - target http://Rajesh-PC:8988/OA_HTML/runregion.jsp

    15/08/24 03:58:30 containers for J2EE 10 g (10.1.3.3.0) initialized Oracle

    15/08/24 03:58:39 HOUR: runregion: initialization [ms 3]

    15/08/24 04:01:07 TIME: runregion: creation of session and transaction [ms 148106]

    24 August 2015 04:01:21 oracle.adf.share.config.ADFConfigFactory findOrCreateADFConfig

    INFO: oracle.adf.share.config.ADFConfigFactory no META-INF/adf - config.xml not found

    15/08/24 04:01:21 java.lang.IllegalArgumentException: unknown signal: ALRM

    15/08/24-04:01:21-sun.misc.Signal. < init > (Signal.java:126)

    15/08/24 04:01:21-oracle.apps.fnd.framework.AppsDiagnosticsHandler.install (unknown Source)

    15/08/24 04:01:21-oracle.apps.fnd.framework.server.OAApplicationModuleImpl.initializeSignalHandler (unknown Source)

    15/08/24-04:01:21-oracle.apps.fnd.framework.server.OAApplicationModuleImpl. < clinit >(Unknown Source)

    15/08/24 04:01:21-java.lang.Class.forName0 (Native Method)

    15/08/24 04:01:21-java.lang.Class.forName(Class.java:242)

    15/08/24 04:01:21-oracle.jbo.common.java2.JDK2ClassLoader.loadClassForName(JDK2ClassLoader.java:38)

    15/08/24 04:01:21-oracle.jbo.common.JBOClass.forName(JBOClass.java:164)

    15/08/24 04:01:21-oracle.jbo.common.JBOClass.findCustomClass(JBOClass.java:177)

    15/08/24 04:01:21-oracle.jbo.server.ApplicationModuleDefImpl.loadFromXML(ApplicationModuleDefImpl.java:836)

    15/08/24 04:01:21-oracle.jbo.server.ApplicationModuleDefImpl.loadFromXML(ApplicationModuleDefImpl.java:770)

    15/08/24 04:01:21-oracle.jbo.server.MetaObjectManager.loadFromXML(MetaObjectManager.java:534)

    15/08/24 04:01:21-oracle.jbo.mom.DefinitionManager.loadLazyDefinitionObject(DefinitionManager.java:547)

    15/08/24 04:01:21-oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:425)

    15/08/24 04:01:21-oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:358)

    15/08/24 04:01:21-oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:340)

    15/08/24 04:01:21-oracle.jbo.server.MetaObjectManager.findMetaObject(MetaObjectManager.java:700)

    15/08/24 04:01:21-oracle.jbo.server.ApplicationModuleDefImpl.findDefObject(ApplicationModuleDefImpl.java:232)

    15/08/24 04:01:21-oracle.jbo.server.ApplicationModuleImpl.createRootApplicationModule(ApplicationModuleImpl.java:401)

    15/08/24 04:01:21-oracle.jbo.server.ApplicationModuleHomeImpl.create(ApplicationModuleHomeImpl.java:91)

    15/08/24 04:01:21-oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.createStaticAKApplicationModule (unknown Source)

    15/08/24 04:01:21-oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.getStaticAKApplicationModuleSync (unknown Source)

    15/08/24 04:01:21-oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.getStaticAKApplicationModule (unknown Source)

    15/08/24 04:01:21-oracle.apps.fnd.framework.webui.OAPageBean.preparePage (unknown Source)

    15/08/24 04:01:21-oracle.apps.fnd.framework.webui.OAPageBean.preparePage (unknown Source)

    15/08/24 04:01:21-oracle.apps.fnd.framework.webui.OAPageBean.preparePage (unknown Source)

    15/08/24 04:01:21-_OA._jspService(_OA.java:71)

    15/08/24 04:01:21-com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)

    15/08/24 04:01:21-oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)

    15/08/24 04:01:21-oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)

    15/08/24 04:01:21-oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)

    15/08/24 04:01:21 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)

    15/08/24 04:01:21-com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)

    15/08/24 04:01:21-com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)

    15/08/24 04:01:21-com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)

    15/08/24 04:01:21-com.evermind.server.http.ServletRequestDispatcher.access$ 100 (ServletRequestDispatcher.java:51)

    15/08/24 04:01:21-com.evermind.server.http.ServletRequestDispatcher$ 2.oc4jRun(ServletRequestDispatcher.java:193)

    15/08/24 04:01:21-oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)

    15/08/24 04:01:21-com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)

    15/08/24 04:01:21-com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:392)

    15/08/24 04:01:21-_OA._jspService(_OA.java:80)

    15/08/24 04:01:21-com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)

    15/08/24 04:01:21-oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)

    15/08/24 04:01:21-oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)

    15/08/24 04:01:21-oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)

    15/08/24 04:01:21 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)

    15/08/24 04:01:21-com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)

    15/08/24 04:01:21-com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)

    15/08/24 04:01:21-com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)

    15/08/24 04:01:21-com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)

    15/08/24 04:01:21-com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)

    15/08/24 04:01:21-com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)

    15/08/24 04:01:21-com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)

    15/08/24 04:01:21-oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)

    15/08/24 04:01:21-oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)

    15/08/24 04:01:21-oracle.oc4j.network.ServerSocketAcceptHandler.access$ 700 (ServerSocketAcceptHandler.java:34)

    15/08/24 04:01:21-oracle.oc4j.network.ServerSocketAcceptHandler$ AcceptHandlerHorse.run (ServerSocketAcceptHandler.java:880)

    15/08/24 04:01:21-com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)

    15/08/24 04:01:21 at java.lang.Thread.run(Thread.java:595)

    Please help me on this issue

    Post edited by: Rajesh123 has added additional information such as Log messages

    Renon,

    Try below:

    In Jdeveloper, go to tools-> Preferences from the embedded server OC4J-> startup-> Select "default local IP address".

  • Application not found error-choose the program you want to use to open this file

    Soon all the world.

    I really hope that someone will post a reply to my question as soon as possible. I will try to be as descriptive as I could possibly, in order to solve my problems.

    The main problem is that I can't open some, if all the program files, applications on my windows 7, 32-bit laptop. I'm constantnly get application not found error, showing in a small window address, I was trying to do. Whenever I want to open a program, like the Adobe reader, word of microsoft, excel, mozilla firefox, google chrome - basically everthing, a window opens and is telling me this: choose the program you want to use to open this file: file: acad.exe... and recommend me acrobat from adobe program, any program I was trying to enter (in this case autoCAD).

    Cannot open cmd, when I go to system recovery, it says: System Restore could not start. I normally post records in: C and: D sheet music, play music, watch videos and see photos. I found a "hole" not being able to go to the internet via a browser. I discovered it when I went to an online help in some of the trobleshoots. It would open tab in google chrome by itself and then on it, I can browse the internet normally, but only through the said track.

    Currently, the microsoft security essentials performs a custom analysis (: C and: D), because I suspect it is a malware, or some kind of virus. It happened when I tried to download a program from CAD Solidworks 2012 via a site that I'm not sure I'm allowed to mention, that I don't want. Unless it's okay with you :) It begins with a letter t. By the way, I noticed that my: partition D has accumulated 10 GB + more in the space of a few days, because I remember two weeks ago I had close to 70 GB of free space, now it's about 56.3 GB. Curious, because I know that I did nothing so great in this period. Maybe I need to tell you that I get this window, from time to time, when I browse the internet (I never visit suspicious sites, or at least I don't me remember more I visited one in a very long time, like 4-5 months):

    [url=http://canadaalltax.com/z/?f=pjrKrjr7vTw8qi5FrTxXrjr4qdgHqjrHqE%3D%3D&eid=727&hid=15769845847361013151&pid=0&ch=666&rf=http%3A%2F%2Fwww.boldride.com%2Fbrand%2Fwilliams-racing&s=px.pluginh&r=0.13960388134319002]http://canadaalltax.com/z/?f=pjrKrjr7vTw8qi5FrTxXrjr4qdgHqjrHqE%3D%3D&eid=727&hid=15769845847361013151&pid=0&ch=666&rf=http%3A%2F%2Fwww.boldride.com%2Fbrand%2Fwilliams-racing&s=px.pluginh&r=0.13960388134319002[/url]

    I found this in my story, be very careful what you do with this link, I don't want that take you anything ;)

    That's on my side, please ask anything and everything, I'll visit this page when I can.

    Good bye!

    P.S. forgot to mention that when I download a program (mozilla Firefox), I can not run it due to: Application not found. I hope I found the right place for it.

    Original title: Windows 7 - Application not found. A big problem or easy-peasy?

    Hello

    Thanks for posting your query in Microsoft Community.

    1. What is the complete error message you get when opening a file?
    2. What happens when you try to open the command prompt?
    3. What happens when you try to access the internet by using Internet Explorer?
    4. You did changes to the computer before the show?

    According to the description of problem errors you get "application not found error" and "choose the program you want to use to open this file" and not being is not able to do system restore, it seems that some windows file is corrupted. I also suggest you to post back the results of analysis.

    I would suggest trying the following methods and check if this is useful:

    Method 1:  Run SFC scan and check for corrupted Windows files and violations of integrity.

    Use the System File Checker tool to repair missing or corrupted system files

    http://support.Microsoft.com/kb/929833

    Method 2:

    For any question, where his prompting you to select the default program
    Try to set the default values for the program
    Change the programs that Windows uses by default

    For any question, where you are not able to download and install firefox, download the file and save it and then try to install firefox.

    I hope this helps. Please let us know the results. Feel free to write us again for any help.

  • Unable to take backup on Windows 7 get error code 0 x 81000019 and message backup Windows found errors on the media during a backup on it and can't use it for additional backups.

    Original title: backup Windows found errors on the media during a backup.

    original title: backup errors

    Whenever I try to do my monthly backup I get the following messages

    Backup Windows found errors on the media during a backup on it and can not use it for additional backups.

    Pleas write the following label on a blank media and insert it into D: /.

    I did and then he asked me to get in shape, I say OK and I get the same message on the media errors and I put another disc and get the same problems again. I can't find out what the problem is, what can I do to fix this problem and get a new backup?

    I now have an error 0 x 81000019

    Hello

    You did changes to the computer before the show?

    Method 1: Check if the shadow copy volume is running
    (a) click Start.
    (b) in the search box, type Services.msc.
    shadow copy Volume c) right-click and go to properties.
    (d) select Auto (Delayed) in the start menu type in the menu drop-down.

    Method 2: Clean boot
    When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.microsoft.com/kb/929135.

    Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

    Method 3:

    Check all your drives to NTFS.

    This problem may occur if the drive is not NTFS format.

    Please follow the steps mentioned below to convert the reader:

    Using the Convert command

    1. click on the "Start" button, click "all programs" and click on "Accessories".

    2. right click on "command prompt" and click "run as administrator".

    3. in the window "Administrator: command prompt", type the following command and press ENTER.

    CONVERT %Drive% letter: / FS: NTFS

    letter of %Drive% is the driver that you want to convert. For example, type the following command to convert drive F to NTFS:

    CONVERT F:/FS: NTFS

    4. when the following message appears in the command prompt window, type the volume label of the drive that you are converting, and then press ENTER:

    The type of the file system is FAT.

    Enter the name of the current volume of reader letter %Drive%:

    Type any string of characters for the Volume name. If you simply press ENTER, it will affect 'Local disk' as the default Volume name.

    5. when the conversion to NTFS is complete, the following line appears in the command prompt window:

    "Complete conversion".

    6. restart the computer and check the result.

    Hope this information is useful.

  • Error - EPPkt.sys and c:\windows\system32\drivers\afw.sys not found and fix crashes in Windows XP Pro computer.

    Original title: during repair XP Pro from the disk installation, everything crashes.

    I am writing this plea on my desktop, pc Win 7 it. The pc is older and elsewhere in the House.

    Due to the white/white space in Add/Remove Programs, after checking the extent of possible for viruses, corruption Reg, etc., the advice of consensus was to reinstall the Windows, using the disc (this XP Pro was on the HARD drive when I got the pc - new to 2009 - and I did the back-up recommended/controlled , and that's what I was doing Rcounter Set up, around 1700 BST.

    Everything seemed to go OK, but black screen of Windows is now the small hourglass circulating and 'Please wait '.  The HARD drive is flickering, but it's been more than 3 hours!

    My second pc was rotten, and I had to reinstall or repair XP Home [disk] a few times. It is only 35 GB, compared to more than 100 on the pc in question - but I've never met before delay.

    Installation messages were as follows:

    EPPkt.sys and c:\windows\system32\drivers\afw.sys not found.  I checked this point, and it should not have caused any problems. It has also sought a labeled disc 'Machine Virtual Network Services', which no doubt, since I did not, was never necessary.

    I'll leave it on - but...

    Help, please!

    Well, I had to bow to the inevitable. Please accept this response as a ' I've been there - it could happen to you. "

    I spoke to BT [they provide my broadband] and the helpful guy asked me to look at the installation and reinstall in a different place. It's OK, but [, BUT] some of the drivers have been zapped in eternity. PCI, sounds, videos. The guy thought BT that these had been modified or replaced since the beginning, whereas they were not available. The XP Prof is on the pc when I got it, but I assumed that the pilots were on the backup disk, I did. No, they were not. And how to go online to search for them if we could not put in place the ethernet connection?
    So, I bought Win - 7 it 32-bit full ed. [be too afraid to try an upgrade].

    It could have been a response in the migration of these from other drivers, but I guess it was time to go.

    As I can't afford to buy new COREL, MS Word, etc, I have installed free VMWare player as a host for my older progs in a virtual environment.

    Another thing came out of this: although what remained of XP has been saved by 7 as WINDOWS.old, I am very happy that I had a HDD eternal with ntfs to preserve my files and installable 3rd party progs.

    I hope this might help someone - thanks for the info.

  • Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

    Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

    Take a look at this article as it addresses this error code. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Win 2003 error - try to add and remove windows components I get this error. IIS.dll Setup library could not be loaded

    When you try to add and remove windows components I get this error. IIS.dll Setup library could not be loaded, or function OcEntry could not be found. code error 0x7e is on a system win 2003

    Hi MickRl,

    The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  • I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."

    I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
    I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

    Thank you

    I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
    I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

    Thank you

    Hello

    you are fully updated? This means that the module cannot be found, what you want to do when you get this error? error codes >?

    check the reports on the problems and solutions

    You can do a support ticket, follow the link

    http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us; Select & Target = support

    Microsoft product support has some tools that will be useful and can help to find a solution

    have a great day with OneCare Scan + 50 tips Windows 7even infected with the center of privacy? DELETE this Blog search & response threat Sysinternals Live Tools + TRANSLATOR+ Photosynth + Microsoft Security + Microsoft SUPPORT + Of Live Labs PIVOT + Microsoft Live Labs + Office 2010 beta + get Windows LIVE!

  • 80072efd error when updating windows and messenger

    Hey my update log indicates that the last update, I was able to install and DL was 11.12.2008 after the computer I (we) gave this error message: 80072efd.

    I tried to do the steps in the resolution of the problems, but I do not have an antivirus program today (closed subscription) and my windows firewall is the default value.
    I would just wipe the HD and reinstall Vista but I just recently failed at that and my other laptop is now in the service department: S

    I studied, google and claimed a solution on this issue and at least 10 other technical sites. There is none and to be honest, I don't think that there will be a. I found references to the problem 80072 efd dating from the Vista RC and have NEVER seen a solution. Well, you can wipe your hard drive and re install if you have a disk in the windows retail, but I call that a 'solution' that is just nuking everything you have and start over again. Kind of like having a house where the entry door won't lock so shave you this House down and rebuild AnotherOne coming soon that resembles it in the same place once you have thrown debris...

    Note: I'm sorry, I do not see your Messenger reference. I saw that it fixed when messenger is the cause. Read the solution "swanands" on THIS thread and see if it works. It is one of several solutions I've seen work for 80072 EFD for MESSENGER.

  • Windows XP starts, an error message appears. 'RUNDLL error loading C:\Windows\ihukuqej.dll'. The module specific cound not be found.

    Original title: Windows Rundll error on startup

    My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll.  The module specific cound not be found.  I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.

    What is a rundll error?

    File rundll.exe are processes systems directly connected to your computer Windows registry. All of the Dll files are a part of the vast library that contains code and data that are shared by many programs. This allows to obtain the effectiveness of speed and memory of your operating system by reusing the same code or file to run many functions of various programs. An error occurs when the program are not allowed to access this code.

    Why do you Rundll errors?

    Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.

    STEP 1: IDENTIFY

    The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:

    STEP 2: STOP THE PROCESS

    Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
    1. open your Start menu.
    2. click on run
    3. in the command screen type:services.msc
    4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
    5.stop the "dll" service immediately.

    NOTE: sometimes the dll process can not be stopped by this method.

    STEP 3: CHECK FOR AND REMOVE

    You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

    This action will help you speed up the considerable load time of your applications. Here's how:

    1. click on Start
    2. click on run
    3. type regedit
    4. find this registry key:
    HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

    5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
    6. delete the value and reboot.

    SPECIAL REMARKS

    Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.

    The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.

    ======================

    More information is a lot to explain and resolve the problem.

    Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.

    Because not only it solves problems, there will be new user settings and the program files needed for the user account.

    Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.

    Here is the link.

    Run hitman pro 3.5

    http://www.SurfRight.nl/en/downloads

  • Error on startup: "Error loading C;\windows\apakahubozerahe.dll the specified module is not found."

    Whenever I start my PC, you receive this error message; "Error loading C;\windows\apakahubozerahe.dll the specified module is not found.   How can I get rid of this? I can't find the file in c: Windows to remove and my registry cleaner does not clean it?

    He does not seem to cause any trouble and disappears when OK is hit.

    Hi Kevin!
    Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
    1. after the download is complete, select autoruns & right click on it
    2. click on "extract here".
    3. on the extracted files, click "autoruns" application select it & right click and click"Open or run"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
    4. what which is complete, Open or run "autoruns".
    5. in the opened window, click 'all'.
    6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
    7 right-click & click delete & ok

    He helped?

  • "Stop: c0000135" and "winsrv was not found" error

    Hello:

    I'm working on my aunt's computer and she recently started having an error message when it tries to start his computer: "Stop: c0000135" and "winsrv was not found" error.  I can't start in safe mode because it just goes back to the blue screen and gives the same error.  She can't find the cd of 'restoration' and I can't find a windows XP CD created to boot from.  In addition, as info, she has not installed anything new recently.

    However, I have access to a Windows 7 Cd, but as I understand it, this doesn't help me as much as a windows 7 CD won't work on an XP operating system.

    I'm not very high technology, I just generally help solve problems by searching the Web for answers.

    Can someone offer me some very specific steps to get his computer facing up and running, please?  Also, before doing anything that is suggested as I can and I have to back up his hard drive?  If so, how can I do that without possibility to connect to the computer?

    Thanks in advance

    Hello

    You can download a Windows XP recovery console (ISO) by http://www.mediafire.com/?ueyyzfymmig CD image

    Once you have downloaded the files burning the image on CD. You can do this with a program like Imgburn. ImgBurn can be downloaded at http://www.imgburn.com/index.php?act=download.

    Once you have written the CD you must restart the PC and start the PC with the CD. To do this, you will need to change the boot order in the BIOS to start first with the CD player. To access the BIOS, usually press you on F2, F10 or DEL. (when you put the top PC tell XX press the button to enter Setup/BIOS). Once in the BIOS search the menu for something in the sense of "Boot Priority" or "First Boot Device" or "Boot Order". Once you've found the setting change so that the CD drive is the first boot device. Save the settings and exit the BIOS.

    Now you can start the PC with the CD. If you get the message press any key to boot from CD - press a key.

    After the Conference on Disarmament has started, you will get a menu on the screen. Press 'r' to enter the Recovery Console.

    Follow the instructions on the screen. You will receive a list of the Windows Installations. Press '1' to connect to the Master Installation of Windows.

    You will be asked to enter the administrator password. Enter it or leave empty if there is no password and press ENTER.

    You should now be on the command line C:\Windows >

    Now type in

    CHKDSK c:/r

    Press ENTER. Allow chkdsk repair disk errors, it can find.

    Once done type in

    CD system32

    Press ENTER. Now type in

    dllcache\winsrv.dll copy

    Press ENTER. You should see a response saying that the file has been copied. (If one of these commands give a type error in the error in your next post).

    If everything is successful in type

    Output

    and press ENTER. Remove the CD and allow Windows to start normally.

    It's always a good idea to make a backup of your important/emails etc documents before attempting to repair a PC (just in case something goes wrong). Because you do not have Windows, you will need to take the hard drive on your PC and attach it as a 2nd or slave hard drive on another PC work. This will allow you to see it as a drive E: or F: (or the next drive letter, it's free). You will then be able to copy the data on the hard drive of the computer to work.

    I hope this helps.

    Edit: Afterwards, I know you said, nothing has been installed recently, but you might want to look at this article: http://support.microsoft.com/kb/885523. The article describes the situation even after installation of SP2. Maybe the SP2 has been installed inadvertently through Windows update?

Maybe you are looking for

  • Track return on a hike

    There is a nice piece of functionality with Garmin watches that retrace your steps using the GPS while hiking. It doesn't load the maps or something like that but displays your breadcrumb to let you know where to turn when you're in unfamiliar places

  • Balanced circuit differential measurement

    I remember back to Labview 5 national had a great discussion tutorial white paper or knowledge base on how to understand the values of resistance when you perform a measurement of differential circuit.  I have a PXI-6230.  I can't find that anywhere

  • Disable the wallpaper slide show in Vista.

    Original title: Cancel the wallpaper slide show on Vista My sister has a problem with a slide show of wallpaper happening, when it has not yet been created.   She seems to not have the opportunity to create even when I defeated his office appearance,

  • without speakers my office has no sound

    At Christmas, I bought a HP envy, office 700-019 who has beats audio, no pregnant purchase separately, I have no sound, is this how this desktop computer is delivered or is there a problem with the audio. With attached speakers, I get sound great, bu

  • router to router 2821 encryption

    How to secure this scenerio? (1) site A has a 2821 router and an IP connection to the site C. 2821 on another organizations IP network. (2) site B has a router 2821 with an MPLS connection at the site of the C-2821. It's pretty easy to connect and ge